Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupled system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Vibrations of three-dimensional pipe systems with acoustic coupling

A general algorithm is developed to calculate the beam-type dynamic response of three dimensional multiplane finite length pipe systems, consisting of elbow and straight ducts with continuous interfaces. Emphasis is on secondary acoustic wave effects giving rise to coupling mechanisms; and the simulation accounts for one-dimensional elastoacoustic coupling from a plane acoustic wave and secondary loads resulting from wave asymmetries. The transfer matrix approach is adopted in modeling the elastodynamics of each duct, with allowance for distribution loads. Secondary loads from plane wave distortion are considered with a solution of the Helmholtz equation in an equivalent rigid waveguide, and effects of path imperfection are introduced as a perturbation from the hypothetical perfectly straight pipe. Computations indicate that the one-dimensional acoustic assumption is valid for frequencies below one-half the first cut-off frequency, and the three-dimensional acoustic effects produce an increase in response levels near and above cut-off.

El-Raheb, M.↗
NASA NTRS1980

Low power, compact charge coupled device signal processing system

A variety of charged coupled devices (CCDs) for performing programmable correlation for preprocessing environmental sensor data preparatory to its transmission to the ground were developed. A total of two separate ICs were developed and a third was evaluated. The first IC was a CCD chirp z transform IC capable of performing a 32 point DFT at frequencies to 1 MHz. All on chip circuitry operated as designed with the exception of the limited dynamic range caused by a fixed pattern noise due to interactions between the digital and analog circuits. The second IC developed was a 64 stage CCD analog/analog correlator for performing time domain correlation. Multiplier errors were found to be less than 1 percent at designed signal levels and less than 0.3 percent at the measured smaller levels. A prototype IC for performing time domain correlation was also evaluated.

Bosshart, P. W.↗
NASA NTRS2011

Camera, handlens, and microscope optical system for imaging and coupled optical spectroscopy

An optical system comprising two lens cells, each lens cell comprising multiple lens elements, to provide imaging over a very wide image distance and within a wide range of magnification by changing the distance between the two lens cells. An embodiment also provides scannable laser spectroscopic measurements within the field-of-view of the instrument.

Mungas, Greg S.↗
NASA NTRS2012

Camera, handlens, and microscope optical system for imaging and coupled optical spectroscopy

An optical system comprising two lens cells, each lens cell comprising multiple lens elements, to provide imaging over a very wide image distance and within a wide range of magnification by changing the distance between the two lens cells. An embodiment also provides scannable laser spectroscopic measurements within the field-of-view of the instrument.

Mungas, Greg S.↗
NASA NTRS1985

Cross coupling in pilot/vehicle systems

Multiloop pilot/vehicle analysis is applied to the problem of determining crossfeed techniques which may be employed by pilots in minimizing the effects of vehicle cross coupling. As used here, cross coupling refers to unwanted vehicle motion which occurs in one control axis or loop as the result of pilot control actuation in another control axis or loop. The minimization or elimination of such cross coupling can contribute significantly to the 'workload' associated with tasks like nap-of-the-earth helicopter flight. In contrast, situations arise in which pilot's may use vehicle cross coupling to improve performance by coordinating two control actuations in the control of a single response variable. A crossfeed model is developed based upon simple control system design principles and configured in a manner amenable to pilot pursuit or precognitive control activity. A handling qualities theory developed to analyze single loop tasks is applied to the multiloop problem. The crossfeed model is applied to five different vehicles/configurations ranging from helicopters to fighter aircraft. Results indicate relatively simple crossfeed commands can significantly reduce cross coupling and, in some improve handling qualities as predicted by the single loop theory.

Hess, R. A.↗
NASA NTRS1981

Radiatively coupled thermionic power system concept

It is shown that thermionic converters at moderate emitter temperatures of about 1600 K can be designed for a radiatively coupled 100 kWe device. A nuclear reactor is a primary heat source, with heat pipes extracting heat from the reactor and distributing it over a large surface opposite an array of thermionic energy converters. The radiative heat transfer across the vacuum gap heats up the thermionic emitters, and excess heat from the converters is radiated from the collector electrodes to the vacuum of space; the heat transfer is controlled by the energy density to be transferred, and by the temperature differential between the heat source and the heat receiver. It is concluded that this system achieves isolation of power converter modules from the heat source, elimination of additional radiators, and reduction of converter dimensions.

Shimada, K.↗
NASA NTRS1984

Coupled orbiting inertial reference systems and Geopotential Research Mission (GRM) geodesy

Two spacecraft, one following the other with a separation of a few hundred kilometers and orbiting at an altitude of 160 km in a 90-degree polar orbit, are used to detect the minute variations in the earth's gravitational field. Housed in a capacitive cavity located at the centroid of the spacecraft is a free-floating metallic spherical proof-mass, which is the sensor controlling the thrusters that nullify all nongravitational forces on the spacecraft. The proof-mass in each spacecraft is the inertial-guidance reference for its host spacecraft, and the proof-masses are coupled together by a millimeter-wave link. This coupled system detects minute changes in the spacecraft's orbital positions and thus measures the anomalies present in the gravitational field of the earth. To derive a global geodetic model of the gravitational field with an amplitude resolution of 1 milligal and a spatial resolution of 100 km requires that the relative velocity between the proof-mass references be determined to within 1 micron/s.

Keating, T.↗
NASA NTRS2002

Technology Development of a Fiber Optic-Coupled Laser Ignition System for Multi-Combustor Rocket Engines

This paper addresses the progress of technology development of a laser ignition system at NASA Marshall Space Flight Center (MSFC). The first two years of the project focus on comprehensive assessments and evaluations of a novel dual-pulse laser concept, flight- qualified laser system, and the technology required to integrate the laser ignition system to a rocket chamber. With collaborations of the Department of Energy/Los Alamos National Laboratory (LANL) and CFD Research Corporation (CFDRC), MSFC has conducted 26 hot fire ignition tests with lab-scale laser systems. These tests demonstrate the concept feasibility of dual-pulse laser ignition to initiate gaseous oxygen (GOX)/liquid kerosene (RP-1) combustion in a rocket chamber. Presently, a fiber optic- coupled miniaturized laser ignition prototype is being implemented at the rocket chamber test rig for future testing. Future work is guided by a technology road map that outlines the work required for maturing a laser ignition system. This road map defines activities for the next six years, with the goal of developing a flight-ready laser ignition system.

Trinh, Huu P.↗
NASA NTRS1984

A system-level mathematical model for evaluation of power train performance of load-leveled electric-vehicles

The power train performance of load leveled electric vehicles can be compared with that of nonload leveled systems by use of a simple mathematical model. This method of measurement involves a number of parameters including the degree of load leveling and regeneration, the flywheel mechanical to electrical energy fraction, and efficiencies of the motor, generator, flywheel, and transmission. Basic efficiency terms are defined and representative comparisons of a variety of systems are presented. Results of the study indicate that mechanical transfer of energy into and out of the flywheel is more advantageous than electrical transfer. An optimum degree of load leveling may be achieved in terms of the driving cycle, battery characteristics, mode of mechanization, and the efficiency of the components. For state of the art mechanically coupled flyheel systems, load leveling losses can be held to a reasonable 10%; electrically coupled systems can have losses that are up to six times larger. Propulsion system efficiencies for mechanically coupled flywheel systems are predicted to be approximately the 60% achieved on conventional nonload leveled systems.

Purohit, G. P.↗
NASA NTRS1973

Eight channel telephone telemetry system

A portable, indirectly coupled telephone system is reported which transmits/to a central receiving site eight channels of EEG data of sufficient fidelity for screening and/or limited diagnostic use. The system requires no electrical connection to the telephone at the transmitter or at the receiver and is compatible with common EEG recording practice for real-time recording. It accepts 8 input channels simultaneously with one telephone transmitter and one telephone receiver operates from standard power sources.

Smith, R. E.↗
NASA NTRS1987

Stability analysis of two coupled Lorenz lasers and the coupling-induced periodic to chaotic transition

A linear stability analysis of two Lorenz lasers coupled by their electric fields has been performed, and it is shown that the bad cavity condition becomes a function of coupling and that a good cavity instability may occur if the injected fields are inverted before injection. In addition, it is shown that the symmetrically coupled Lorenz system is isomorphic to the original Lorenz system with new parameters. The stability analysis also predicts a lowering of the second laser threshold with coupling for both the chaotic and self-pulsing regimes. Numerical integration of the equations is in agreement with these predictions and has revealed a coupling induced transition from self-pulsing to chaotic behavior. The classification of the behavior of the coupled system in the parameter space of the coupling constants has been investigated and shows that the results of symmetric coupling allow enough of a margin for an experimental test of the theory. This would allow experimentalists to observe the actual Lorenz instability at excitations as low as 4-5 times above threshold.

Lawandy, N. M.↗
NASA NTRSDate not supplied

Reanalysis Activities at the NASA Global Modeling and Assimilation Office

This talk presents an overview of recent reanalysis activities at the NASA Global Modeling and Assimilation Office (GMAO) as part of a multi-faceted strategy towards an Integrated Earth System retrospective analysis, coupling components of the atmosphere, ocean, chemistry, land, and ice. While elements of the atmosphere-ocean coupled Goddard Earth Observing System (GEOS) model and data assimilation are being actively developed, a suite of reanalysis products is designed to provide further understanding of key aspects of Earth system coupling in a reanalysis context: The baseline atmospheric reanalysis, the GEOS Retrospective analysis for the early 21st Century (GEOS-R21C), features recent advances in the GEOS model and data assimilation, and targets the NASA’s Earth Observing System EOS and post-EOS satellite observations; GEOS-IT, a user-tailored low-resolution atmospheric reanalysis, serves as a second baseline to the NASA Instrument Teams for validation and calibration and drives a one-way coupled ocean reanalysis, GEOSIT-Ocean; PolarMERRA, a high-resolution downscaled product for the polar regions, focuses on improving the representation of polar atmospheric processes with an assessment of current cryospheric biases, and targeted improvements to surface sea ice and glacier conditions; Finally, R21C-Chem, an off-line atmospheric chemistry and composition reanalysis, includes both tropospheric and stratospheric trace gases. The diversity of these reanalysis activities presents unique opportunities for collaborations cross-teams/institutions, with new commercial data partners, and with end-user groups. This talk will discuss these opportunities and explore leveraging the lessons learned along the way on key drivers in Earth system interactions as we converge towards the next generation of the Modern-Era Retrospective analysis for Research and Applications (MERRA) suite.

Amal El Akkraoui↗
NASA NTRS1977

Coupled dynamics analysis of wind energy systems

A qualitative description of all key elements of a complete wind energy system computer analysis code is presented. The analysis system addresses the coupled dynamics characteristics of wind energy systems, including the interactions of the rotor, tower, nacelle, power train, control system, and electrical network. The coupled dynamics are analyzed in both the frequency and time domain to provide the basic motions and loads data required for design, performance verification and operations analysis activities. Elements of the coupled analysis code were used to design and analyze candidate rotor articulation concepts. Fundamental results and conclusions derived from these studies are presented.

Hoffman, J. A.↗
NASA NTRS2018

The Development of the New GEOS-MITgcm Atmosphere-Ocean Model for Coupled Data Assimilation System

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8 deg) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12 deg) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗
NASA NTRS2018

The Development of the New GEOS-MITgcm Atmosphere-Ocean Model for Coupled Data Assimilation System

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8°) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12°) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗
NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop® (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

Heat transfer↗