Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “convergence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Research study on stabilization and control modern sampled-data control theory

The methods of continuous and discrete describing function analysis were applied to predicting the existence of self-sustained oscillations in the single-axis model of the large space telescope system with nonlinear control moment gyroscope friction characteristics. It is shown that the stability equations may be solved by a numerical-iterative technique using the describing function analysis, instead of the usual graphical methods. The numerical method is found to be effective in leading to a convergent solution rapidly, with an appropriate guess of the initial condition.

Kuo, B. C.↗
NASA NTRS1985

Perturbation-iteration theory for analyzing microwave striplines

A perturbation-iteration technique is presented for determining the propagation constant and characteristic impedance of an unshielded microstrip transmission line. The method converges to the correct solution with a few iterations at each frequency and is equivalent to a full wave analysis. The perturbation-iteration method gives a direct solution for the propagation constant without having to find the roots of a transcendental dispersion equation. The theory is presented in detail along with numerical results for the effective dielectric constant and characteristic impedance for a wide range of substrate dielectric constants, stripline dimensions, and frequencies.

Kretch, B. E.↗
NASA NTRS1991

Iterative solution techniques in boundary element analysis

Iterative techniques for the solution of the algebraic equations associated with the direct boundary element analysis (BEA) method are discussed. Continuum structural response analysis problems are considered, employing single- and multizone boundary element models with and without zone condensation. The impact on convergence rate and computer resource requirements associated with the sparse and blocked matrices, resulting in multizone BEA, is studied. Both conjugate gradient and generalized minimum residual preconditioned iterative solvers are applied for these problems and the performance of these algorithms is reported. Included is a quantification of the impact of the preconditioning utilized to render the boundary element matrices solvable by the respective iterative methods in a time competitive with direct methods.

Kane, J. H.↗
NASA NTRS2009

A Critical Study of Agglomerated Multigrid Methods for Diffusion

Agglomerated multigrid techniques used in unstructured-grid methods are studied critically for a model problem representative of laminar diffusion in the incompressible limit. The studied target-grid discretizations and discretizations used on agglomerated grids are typical of current node-centered formulations. Agglomerated multigrid convergence rates are presented using a range of two- and three-dimensional randomly perturbed unstructured grids for simple geometries with isotropic and highly stretched grids. Two agglomeration techniques are used within an overall topology-preserving agglomeration framework. The results show that multigrid with an inconsistent coarse-grid scheme using only the edge terms (also referred to in the literature as a thin-layer formulation) provides considerable speedup over single-grid methods but its convergence deteriorates on finer grids. Multigrid with a Galerkin coarse-grid discretization using piecewise-constant prolongation and a heuristic correction factor is slower and also grid-dependent. In contrast, grid-independent convergence rates are demonstrated for multigrid with consistent coarse-grid discretizations. Actual cycle results are verified using quantitative analysis methods in which parts of the cycle are replaced by their idealized counterparts.

Thomas, James L.↗
NASA NTRS1973

Finite element stress analysis of polymers at high strains

A numerical analysis is presented for the problem of a flat rectangular rubber membrane with a circular rigid inclusion undergoing high strains due to the action of an axial load. The neo-hookean constitutive equations are introduced into the general purpose TITUS program by means of equivalent hookean constants and initial strains. The convergence is achieved after a few iterations. The method is not limited to any specific program. The results are in good agreement with those of a company sponsored photoelastic stress analysis. The theoretical and experimental deformed shapes also agree very closely with one another. For high strains it is demonstrated that using the conventional HOOKE law the stress concentration factor obtained is unreliable in the case of rubberlike material.

Durand, M.↗
NASA NTRS2011

Effect of Cross-Correlation on Geomagnetic Forecast Accuracies

Surface geomagnetic observation can determine up to degree L = 14 time-varying spherical harmonic coefficients of the poloidal magnetic field. Assimilation of these coefficients to numerical dynamo simulation could help us understand better the dynamical processes in the Earth's outer core, and to provide more accurate forecast of geomagnetic secular variations (SV). In our previous assimilation studies, only the poloidal magnetic field in the core is corrected by the observations in the analysis. Unobservable core state variables (the toroidal magnetic field and the core velocity field) are corrected via the dynamical equations of the geodynamo. Our assimilation experiments show that the assimilated core state converges near the CMB, implying that the dynamo state is strongly constrained by surface geomagnetic observations, and is pulled closer to the truth by the data. We are now carrying out an ensemble of assimilation runs with 1000 years of geomagnetic and archeo/paleo magnetic record. In these runs the cross correlation between the toroidal and the poloidal magnetic fields is incorporated into the analysis. This correlation is derived from the physical boundary conditions of the toroidal field at the core-mantle boundary (CMB). The assimilation results are then compared with those of the ensemble runs without the cross-correlation, aiming at understanding two fundamental issues: the effect of the crosscorrelation on (1) the convergence of the core state, and (2) the SV prediction accuracies. The constrained dynamo solutions will provide valuable insights on interpreting the observed SV, e.g. the near-equator magnetic flux patches, the core-mantle interactions, and possibly other geodynamic observables.

Kuang, Weijia↗
NASA NTRS1990

Thickness and orientational design for a maximum stiff membrane

Recent results from sensitivity analysis for strain energy with anisotropic elasticity are applied to thickness and orientational design of laminated membranes. Primarily, the first order gradients of the total elastic energy are used in an optimality criteria based method. This traditional method is shown to give slow convergence with respect to design parameters, although the convergence of strain energy is very good. To get a deeper insight into this rather general characteristic, second order derivatives are included and it is shown how they can be obtained by first order sensitivity analysis. Examples of only thickness design, only orientational design, and combined thickness--orientational design are presented.

Pedersen, Pauli↗
NASA NTRS1942

Square plate with clamped edges under normal pressure producing large deflections

A theoretical analysis is given for the stresses and deflections of a square plate with clamped edges under normal pressure producing large deflections. Values of the bending stress and membrane stress at the center of the plate and at the midpoint of the edge are given for center deflections up to 1.9 times the plate thickness. The shape of the deflected surface is given for low pressures and for the highest pressure considered. Convergence of solution is considered and it is estimated that the possible error is less than 2 percent. The results are compared with the only previous approximate analysis known to the author and agrees within 5 percent. They are also shown to compare favorably with the known exact solutions for the long rectangular plate and the circular plate.

Levy, Samuel↗
NASA NTRS2019

Fundamental Improvement of a Convergence Test for Iterative Strain-Gage Balance Load Predictions

A fundamental improvement of a convergence test for wind tunnel strain-gage balance load iterations was developed. The improvement became necessary because incorrect test results were obtained whenever the original test was applied to multi-component balances with large load capacity differences. The original test was first published in NASA TN D-6860. It uses an upper bound of the Lipschitz constant to assess convergence characteristics of balance load predictions whenever the Iterative Method is applied. The Lipschitz constant is a function of the partial derivatives of each balance load component with respect to all other load components. Unfortunately, the original definition of the convergence test overlooked the fact that the Lipschitz constant is a dimensionless quantity and that the partial derivative of one load component with respect to another load component is not always dimensionless. Therefore, an improvement of the original test was successfully developed that uses load capacities to make all inputs for the calculation of the Lipschitz constant dimensionless before use. Results from the calibration data analysis of a six-component force balance and a five-component semi-span balance are used to illustrate the application of the improved load iteration convergence test.

Strain-Gage Balance↗
NASA NTRS1988

Stereo depth distortions in teleoperation

In teleoperation, a typical application of stereo vision is to view a work space located short distances (1 to 3m) in front of the cameras. The work presented here treats converged camera placement and studies the effects of intercamera distance, camera-to-object viewing distance, and focal length of the camera lenses on both stereo depth resolution and stereo depth distortion. While viewing the fronto-parallel plane 1.4 m in front of the cameras, depth errors are measured on the order of 2cm. A geometric analysis was made of the distortion of the fronto-parallel plane of divergence for stereo TV viewing. The results of the analysis were then verified experimentally. The objective was to determine the optimal camera configuration which gave high stereo depth resolution while minimizing stereo depth distortion. It is found that for converged cameras at a fixed camera-to-object viewing distance, larger intercamera distances allow higher depth resolutions, but cause greater depth distortions. Thus with larger intercamera distances, operators will make greater depth errors (because of the greater distortions), but will be more certain that they are not errors (because of the higher resolution).

Diner, Daniel B.↗
NASA NTRS1976

Gradient optimization and nonlinear control

The book represents an introduction to computation in control by an iterative, gradient, numerical method, where linearity is not assumed. The general language and approach used are those of elementary functional analysis. The particular gradient method that is emphasized and used is conjugate gradient descent, a well known method exhibiting quadratic convergence while requiring very little more computation than simple steepest descent. Constraints are not dealt with directly, but rather the approach is to introduce them as penalty terms in the criterion. General conjugate gradient descent methods are developed and applied to problems in control.

Hasdorff, L.↗
NASA NTRS1977

Limitations of the narrow-angle convergent pair

Spatial triangulations and topographies of the Martian surface derived from Viking Orbiter pictures depend on the use of symmetric narrow-angle convergent pairs. The overlap in each pair is close to 100 percent and the ground principal points virtually coincide. The analysis of this paper reveals a high degree of indeterminacy in such pairs and at least in part explains the rather disappointing precision of the associated spatial triangulations.

Arthur, D. W. G.↗
NASA NTRS1977

Vibrations of incompressible liquid-plastic tank combinations using a series representation of the liquid

A series representation is presented of the dynamic behavior of incompressible non-viscous liquids contained in partially filled elastic shells of revolution. Using a series in which each term satisfies exactly Laplace's equation, the liquid portion of the problem becomes an integral equation on the wetted wall of the shell. Physical insight required in selecting the terms of the series is such that selection may be readily programed on a computer. Liquid-shell vibration interaction is investigated by modifying an existing shell of revolution vibration program with the series expansion of the liquid pressure loading on the wetted shell wall. Application of the modified program is demonstrated on a hemispherical tank and a realistic scaled model of a launch vehicle tank having a more complex geometry. Comparison of the present analysis with a NASTRAN finite element analysis for a hemispherical tank, and comparison with test results for a launch vehicle tank shows excellent agreement and rapid convergence of the series representation of the liquid to the true solution.

Housner, J. M.↗
NASA NTRS1985

Real-time flutter identification

The techniques and a FORTRAN 77 MOdal Parameter IDentification (MOPID) computer program developed for identification of the frequencies and damping ratios of multiple flutter modes in real time are documented. Physically meaningful model parameterization was combined with state of the art recursive identification techniques and applied to the problem of real time flutter mode monitoring. The performance of the algorithm in terms of convergence speed and parameter estimation error is demonstrated for several simulated data cases, and the results of actual flight data analysis from two different vehicles are presented. It is indicated that the algorithm is capable of real time monitoring of aircraft flutter characteristics with a high degree of reliability.

Roy, R.↗
NASA NTRS1986

Performance comparisons on spatial lattice algorithm and direct matrix inverse method with application to adaptive arrays processing

Lattice algorithm has been employed in numerous adaptive filtering applications such as speech analysis/synthesis, noise canceling, spectral analysis, and channel equalization. In this paper the application to adaptive-array processing is discussed. The advantages are fast convergence rate as well as computational accuracy independent of the noise and interference conditions. The results produced by this technique are compared to those obtained by the direct matrix inverse method.

An, S. H.↗