Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “color mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Utilization of ERTS-1 data to monitor and classify eutrophication of inland lakes

The author has identified the following significant results. Significant findings are: (1) one acre lakes and one acre islands are detectable; (2) circular lakes of 7.5 acres and greater reach full density; (3) long channels 100 ft wide are detectable; (4) orientation of lakes is independent of scan direction; (5) lake features are observable in enlargements of CCT imagery produced in the Bendix Earth Resources Data Center; and (6) a decision surface water outline map is presented that was produced from ERTS-1 CCT. A water color literature review, baseline water quality data of the test lakes, and a discussion of geometric corrections of the CCT decision water surface outline map are also presented.

Chase, P. E.↗

21-micron observations of H II regions.

The 21-micron contour map of M17 is similar to radio maps with three components. Measured flux densities give color temperatures of both 240 and 75 K for the two principal components of M17 and 44 to 63 K for Sgr B2, NGC 2024, and DR-21.

Lemke, D.↗

Evaluation of satellite remote sensing and automatic data techniques for characterization of wetlands and coastal marshlands

The author has identified the following significant results. The evaluation was conducted in a humid swamp and marsh area of southern Louisiana. ERTS digital multispectral scanner data was compared with similar data gathered by intermediate altitude aircraft. Automatic data processing was applied to several data sets to produce simulated color infrared images, analysis of single bands, thematic maps, and surface classifications. These products were used to determine the effectiveness of satellites to monitor accretion of land, locate aquatic plants, determine water characteristics, and identify marsh and forest species. The results show that to some extent all of these can be done with satellite data. It is most effective for monitoring accretion and least effective in locating aquatic plants. The data sets used show that the ERTS data is superior in mapping quality and accuracy to the aircraft data. However, in some applications requiring high resolution or maximum use of intermittent clear weather conditions, data gathering by aircraft is preferable. Data processing costs for equivalent areas are about three times greater for aircraft data than ERTS data. This is primarily because of the larger volume of data generated by the high resolution aircraft system.

Cartmill, R. H.↗

Geomorphic processes active in the Southwestern Louisiana Canal, Lafourche Parish, Louisiana

The geomorphological changes causing the destruction of the banks of the Southwestern Louisiana Canal are studied by means of field work, laboratory analyses, and infrared color imagery interpretation. Turbulence and flow patterns are mapped, and related to erosion and sediment deposition processes. The accelerated erosion rate of the last decade is discussed, with two causative factors cited: (1) development of faster boats, increasing bank and bottom erosion, and (2) a subsequently larger tidal influx, with greater erosive ability. The physical properties of the canal bank materials are also analyzed. It is concluded that channel erosion progressively increases, with no indications of stabilization, until they merge with other waterways and become indistinguishable from natural water bodies.

Doiron, L. N.↗

Investigation of remote sensing techniques as inputs to operational resource management models

The author has identified the following significant results. Successful operational applications of LANDSAT data were found for level 1 land use mapping, drainage network delineation, and aspen mapping. Visual LANDSAT interpretation using 1:125,000 color composite imagery was the least expensive method of obtaining timely level 1 land use data. With an average agricultural/rangeland interpretation accuracy in excess of 80%, such a data source was considered the most cost effective of those sources available to state agencies. Costs do not compare favorably with those incurred using the present method of extracting land use data from historical tabular summaries. The cost increase in advancing from the present procedure to a satellite-based data source was justified in terms of expanded data content.

Schmer, F. A.↗

Alignment techniques required by precise measurement of effective focal length

The characteristics of false color imagery produced by instrumentation on earth resource mapping satellites are examined. The spatial fidelity of the imagery is dependent upon the geometric accuracy (GA) and the band-to-band registration (BBR) with which the telescope instrument is assembled. BBR and GA require knowledge of telescope effective focal length (EFL) to one part in 10,000 in order that the next generation of earth mappers be able to carry out their missions. The basis for this level of precision is briefly considered, and a description is given of the means by which such precise EFL measurements have been carried out. Attention is given to accuracy requirements, the technique used to measure effective focal length, possible sources of error in the EFL measurement, approaches for eliminating errors, and the results of the efforts to control measurement errors in EFL determinations.

Wise, T. D.↗

An evaluation of ISOCLS and CLASSY clustering algorithms for forest classification in northern Idaho

Both the iterative self-organizing clustering system (ISOCLS) and the CLASSY algorithms were applied to forest and nonforest classes for one 1:24,000 quadrangle map of northern Idaho and the classification and mapping accuracies were evaluated with 1:30,000 color infrared aerial photography. Confusion matrices for the two clustering algorithms were generated and studied to determine which is most applicable to forest and rangeland inventories in future projects. In an unsupervised mode, ISOCLS requires many trial-and-error runs to find the proper parameters to separate desired information classes. CLASSY tells more in a single run concerning the classes that can be separated, shows more promise for forest stratification than ISOCLS, and shows more promise for consistency. One major drawback to CLASSY is that important forest and range classes that are smaller than a minimum cluster size will be combined with other classes. The algorithm requires so much computer storage that only data sets as small as a quadrangle can be used at one time.

Werth, L. F.↗

Valles Marineris Basin Beds: a Complex Story

High resolution stereoimages of the central Valles Marineris enabled detailed geologic mapping on Ophir and Candor Chasmata. Abundant light colored deposits, both layered and massive, fill the chasmata in this region. Units within these deposits were identified by their erosional characteristics and superposition and cross cutting relations. The Valles Marineris beds reflect a history of repeated faulting, volcanic eruptions, and deposition and erosion, resulting in stratigraphic sequences with several unconformities. Because of the preponderance of apparent volcanic deposits inside the troughs, the chasmata may not be simple grabens, but rather giant volcano tectonic depressions. Major events in chasmata development are examined.

Lucchitta, B. K.↗

Long-term changes in reflectivity and larger scale motions in the atmospheres of Jupiter and Saturn

A multi-color, broad-band photographic program for monitoring atmospheric variability of Jupiter and Saturn with the 61-cm, f/75 telescope was continued. The archivial product consists of approximately 20 sequential images on 3 1/4 x 4 1/4 glass plates with a plate scale of 4.53 arc sec/mm. An eleven-step sensitometric wedge, recorded times of acquisition, and fiducial marks which determine the orientation of the plate, are recorded on each individual plate. This allows accurate positional measurements, as well as detailed relative surface brightness determinations. Detailed measurements of the Red Spot are being utilized in a study of zonal velocity variation and the ability to predict the longitude of the Red Spot during the Galileo mission. An ongoing 5-color series of Saturn has been maintained to map the seasonal changes in the belt-zone reflectivity. Digitization of a series of blue images containing the Red Spot and a series of red and blue images excluding the Red Spot are being processed and reduced to normalized surface brightness maps. This data is being utilized to map time-dependent brightness variations of selected features, belts, and ones.

Beebe, R. F.↗

Accurate Inventories Of Irrigated Land

System for taking land-use inventories overcomes two problems in estimating extent of irrigated land: only small portion of large state surveyed in given year, and aerial photographs made on 1 day out of year do not provide adequate picture of areas growing more than one crop per year. Developed for state of California as guide to controlling, protecting, conserving, and distributing water within state. Adapted to any large area in which large amounts of irrigation water needed for agriculture. Combination of satellite images, aerial photography, and ground surveys yields data for computer analysis. Analyst also consults agricultural statistics, current farm reports, weather reports, and maps. These information sources aid in interpreting patterns, colors, textures, and shapes on Landsat-images.

Wall, S.↗

Chronology, eruption duration, and atmospheric contribution of the Martian volcano Apollinaris Patera

Results are presented of an investigation of the geology, physical properties, and topography of Apollinaris Patera which was performed on the basis of geologic mapping, thermal inertia measurements, and analysis of the color (visual wavelengths) of this Martian volcano. Initially, the main edifice was formed over a period of about 10 exp 7 yr, and then the volcano experienced a period of quiescence during which the basal scarp formed and the valleys were incised in the main flanks. Activity at the summit formed the present large outer caldera and floor materials. After, or during late stages of outer calder activity, the materials that formed the fan were erupted over 10,000 yr. After emplacement of the fan materials, the smaller, inner caldera and associated floor materials formed over an unconstrained time period. Morphologic analysis suggests that a significant portion of the main edifice is composed of poorly to nonwelded pyroclastic deposits, possibly including a phreatomagmatic component.

Robinson, Mark S.↗

Evaluation of Sulfur Flow Emplacement on Io from Galileo Data and Numerical Modeling

Galileo images of bright lava flows surrounding Emakong Patera have been analyzed and numerical modeling has been performed to assess whether these flows could have resulted from the emplacement of sulfur lavas on Io. Images from the solid-state imaging.(SSI) camera show that these bright, white to yellow Emakong flows are up to 370 km long and contain dark, sinuous features that are interpreted to be lava conduits, approx. 300-500 m wide and > 100 km long. Near-Infrared Mapping Spectrometer (NIMS) thermal emission data yield a color temperature estimate of 344 K +/- 60 K (less than or equal to 131 C) within the Emakong caldera. We suggest that these bright flows likely resulted from either sulfur lavas or silicate lavas that have undergone extensive cooling, pyroclastic mantling, and/or alteration with bright sulfurous materials. The Emakong bright flows have estimated volumes of approx. 250-350 cu km, similar to some of the smaller Columbia River Basalt flows. If the Emakong flows did result from effusive sulfur eruptions, then they are orders of magnitude greater in volume than any terrestrial sulfur flows. Our numerical modeling results show that sulfur lavas on Io could have been emplaced as turbulent flows, which were capable of traveling tens to hundreds of kilometers, consistent with the predictions of Sagan [ 19793 and Fink et al. [ 19831. Our modeled flow distances are also consistent with the measured lengths of the Emakong channels and bright flows. Modeled thermal erosion rates are approx. 1-4 m/d for flows erupted at approx. 140-180 C, which are consistent with the melting rates of Kieffer et al. [2000]. The Emakong channels could be thermal erosional in nature; however, the morphologic signatures of thermal erosion channels cannot be discerned from available images. There are planned Galileo flybys of Io in 2001 which provide excellent opportunities to obtain high-resolution morphologic and color data of Emakong Patera. Such observations could, along with further modeling, provide additional information to better constrain whether sulfur lavas produced the Emakong flows.

Williams, David A.↗

Lunar and Planetary Science XXXV: Lunar Remote Sensing: Seeing the Big Picture

The session "Lunar Remote Sensing: Seeing the Big Picture" contained the following reports:Approaches for Approximating Topography in High Resolution, Multispectral Data; Verification of Quality and Compatibility for the Newly Calibrated Clementine NIR Data Set; Near Infrared Spectral Properties of Selected Nearside and Farside Sites ; Global Comparisons of Mare Volcanism from Clementine Near-Infrared Data; Testing the Relation Between UVVIS Color and TiO2 Composition in the Lunar Maria; Color Reflectance Trends in the Mare: Implications for Mapping Iron with Multispectral Images ; The Composition of the Lunar Megaregolith: Some Initial Results from Global Mapping; Global Images of Mg-Number Derived from Clementine Data; The Origin of Lunar Crater Rays; Properties of Lunar Crater Ejecta from New 70-cm Radar Observations ; Permanent Sunlight at the Lunar North Pole; and ESA s SMART-1 Mission to the Moon: Goals, Status and First Results.

Source record↗

Cavity Heating Experiments Supporting Shuttle Columbia Accident Investigation

The two-color thermographic phosphor method has been used to map the local heating augmentation of scaled idealized cavities at conditions simulating the windward surface of the Shuttle Orbiter Columbia during flight STS-107. Two experiments initiated in support of the Columbia Accident Investigation were conducted in the Langley 20-Inch Mach 6 Tunnel. Generally, the first test series evaluated open (length-to-depth less than 10) rectangular cavity geometries proposed as possible damage scenarios resulting from foam and ice impact during launch at several discrete locations on the vehicle windward surface, though some closed (length-to-depth greater than 13) geometries were briefly examined. The second test series was designed to parametrically evaluate heating augmentation in closed rectangular cavities. The tests were conducted under laminar cavity entry conditions over a range of local boundary layer edge-flow parameters typical of re-entry. Cavity design parameters were developed using laminar computational predictions, while the experimental boundary layer state conditions were inferred from the heating measurements. An analysis of the aeroheating caused by cavities allowed exclusion of non-breeching damage from the possible loss scenarios being considered during the investigation.

Everhart, Joel L.↗

Interactive Display of Scenes with Annotations

ThreeDView is a computer program that enables high-performance interactive display of real-world scenes with annotations. ThreeDView was developed primarily as a component of the Science Activity Planner (SAP) software, wherein it is to be used to display annotated images of terrain acquired by exploratory robots on Mars and possibly other remote planets. The images can be generated from sets of multiple-texture image data in the Visible Scalable Terrain (ViSTa) format, which was described in "Format for Interchange and Display of 3D Terrain Data" (NPO-30600) NASA Tech Briefs, Vol. 28, No. 12 (December 2004), page 25. In ThreeDView, terrain data can be loaded rapidly, the geometric level of detail and texture resolution can be selected, false colors can be used to represent scientific data mapped onto terrain, and the user can select among navigation modes. ThreeDView consists largely of modular Java software components that can easily be reused and extended to produce new high-performance, application-specific software systems for displaying images of three-dimensional real-world scenes.

Vona, Marsette↗

Mars' global properties - Maps and applications

Mars data sets from many sources have been put into a common digital format and global maps at constant scale have been produced. These formatted data sets form the basis of the Mars Consortium. They currently include maps of geology, volcanic units, channels, wind features, topography, gravity, Viking approach and apoapsis color, predawn temperature residuals, thermal inertia, radiometric and solar albedo, water vapor abundance, 1.4 micrometers albedo, crater abundance, Earth-based radar and photographic telescope observations, and terrestrial spectral observations. The generation of these data sets is briefly described. As an example of their use, the mapped geologic units are characterized in terms of color, predawn temperature and elevation, and unusual areas identified. The Oxia Palus region is examined as an example of combining higher resolution data with the Consortium data sets. Use of the existing data sets and submission of new ones are encouraged.

Kieffer, H. H.↗

Spectral mapping of Alaskan ophiolites using Landsat Thematic Mapper data

Ophiolites are sections of oceanic lithosphere that have been exposed by thrusting in mountain belts. Thematic Mapper three-band color composites have been used to differentiate the main rock types of the ophiolites of the western Brooks Range, Alaska, and to map mineralogic variations produced by processes that affect oceanic lithosphere, such as mantle partial melting, hydration of ultramafic rock, formation of cumulate layers, and hydrothermal alteration and metamorphism of basalt. Scaled composites of TM Bands 7, 3, 1 and 5, 4, 2, and 3, 2, 1, displayed in red, green, and blue are most useful for visually differentiating rocks of the ophiolites. Ternary diagrams of digital number values are used to evaluate color variations observed in the three-band composites. Geologic maps, interpreted from TM images and reconnaissance field studies, are presented for the Asik Mountain, Maiyumerak Mountains, Avan Hills, and Misheguk Mountain ophiolites. The mapping results are being used to guide additional studies of the tectonics of the Brooks Range ophiolites.

Harding, David J.↗

Mapping of wildlife habitat in Farmington Bay, Utah

Mapping was accomplished through the interpretation of high-altitude color infrared photography. The feasibility of utilizing LANDSAT digital data to augment the analysis was explored; complex patterns of wildlife habitat and confusion of spectral classes resulted in the decision to make limited use of LANDSAT data in the analysis. The final product is a map which delineates wildlife habitat at a scale of 1:24,000. The map is registered to and printed on a screened U.S.G.S. quadrangle base map. Screened delineations of shoreline contours, mapped from a previous study, are also shown on the map. Intensive field checking of the map was accomplished for the Farmington Bay Waterfowl Management Area in August 1981; other areas on the map received only spot field checking.

Jaynes, R. A.↗