Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “capacity factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Fuel-to-Coolant Heat Transfer During Reactivity-Initiated Accidents Using Tightly Coupled Thermal Hydraulics and Fuel Thermomechanics

The reactivity-initiated accident (RIA) is a complex scenario with several tightly interacting physical phenomena. Accurately predicting fuel behavior during these transients is difficult due to limitations in the modeling of fuel-to-coolant heat transfer. Common approaches to simulate RIAs involve standalone calculations using either a fuel performance code or a thermal-hydraulic code. The complex interdependencies of thermal-hydraulic and fuel mechanical behavior suggest that a tight coupling between these codes may provide more accurate predictions of fuel-to-coolant heat transfer and cladding mechanical response. Here, RELAP5-3D and BISON are coupled in this paper to simulate RIAs, and a sensitivity analysis is performed to rank key thermal properties and two-phase heat transfer parameters relevant for fuel-to-coolant heat transfer and cladding failure mechanisms in UO 2 –Zircaloy-4 systems. Gas gap conductance, film boiling heat transfer uncertainty, pulse width, fuel-specific heat capacity, and cladding-specific heat capacity were identified as important parameters. Variations in figures of merit resulting from changes to pulse width and the material thermal properties indicate that time-dependent heat transfer rates are significant for safety-relevant mechanical parameters due to the time dependence of cladding ductility and pellet-cladding mechanical interaction loading. The results suggest that the thermal-hydraulic factors have a nonnegligible influence on the thermomechanical solution and vice versa. Tight coupling of both sets of physics is recommended to improve prediction of fuel behavior during RIAs. Highlights include the following: 1. The RELAP5-3D thermal-hydraulic code and the BISON fuel performance code are tightly coupled for simulation of RIA transients with energy depositions at the Zircaloy-4 cladding failure threshold. 2. Departure from nucleate boiling occurred for all simulated cases. Due to the ductility of fresh fuel, substantial ballooning occurred in most cases. 3. Gas gap conductance, fuel-specific heat capacity, cladding-specific heat capacity, transient pulse width, and film boiling heat transfer were the dominant thermal factors impacting the safety figures of merit at energy depositions.

Critical Heat Flux (CHF)↗
DOE OSTI2023

Medium-temperature phase change material integration in domestic heat pump water heaters for improved thermal energy storage

In this review, we examine state-of-the-art developments in integrating phase change materials (PCMs) for thermal energy storage (TES) in domestic heat pump water heaters (HPWHs). The component design optimization and control optimization of HPWHs and TES are reviewed for insight into improving the thermal capacity and efficiency of a PCM-integrated HPWH. The state-of-the-art review is categorized by the stage of development of the PCM for deployment in HPWHs. To select appropriate PCMs for HPWHs, a six-factor down-selection process is used to determine the best material(s) for integration in HPWHs with appropriate heat exchanger design. Ultimately, food-grade PCMs appear to be the best candidate for integration of TES in domestic HPWHs because they are nontoxic, highly cyclable, and have heat transfer properties accommodable to water heating when integrated in a manner to overcome the thermal conductivity limitations of the material. A key parameter of water heating performance is thermal heating power of the PCM component, which is not often reported. Many studies report significant improvement in capacity and efficiency. Furthermore, many performance metrics are identified from the literature to quantify the system performance, but agreement across studies is not found. Unified energy factor and first hour rating performance tests are required for commercially available HPWHs, and these performance metrics could homogenize the literature. Ultimately, we find that select PCMs are ready for deployment with HPWHs for performance improvement, and component design and control optimizations are new avenues of research and development required for a commercially viable PCM-integrated HPWH system.

25 ENERGY STORAGE↗
DOE OSTI2024

Abiotic and biotic factors jointly influence the contact and environmental transmission of a generalist pathogen

The joint influence of abiotic and biotic factors is important for understanding the transmission of generalist pathogens. Abiotic factors such as temperature can directly influence pathogen persistence in the environment and will also affect biotic factors, such as host community composition and abundance. At intermediate spatial scales, the effects of temperature, community composition, and host abundance are expected to contribute to generalist pathogen transmission. We use a simple transmission model to explain and predict how host community composition, host abundance, and environmental pathogen persistence times can independently and jointly influence transmission. Our transmission model clarifies how abiotic and biotic factors can synergistically support the transmission of a pathogen. The empirical data show that high community competence, high abundance, and low temperatures correlate with high levels of transmission of ranavirus in larval amphibian communities. Discrete wetlands inhabited by larval amphibians in the presence of ranavirus provide a compelling case study comprising distinct host communities at a spatial scale anticipated to demonstrate abiotic and biotic influence on transmission. We use these host communities to observe phenomena demonstrated in our theoretical model. These findings emphasize the importance of considering both abiotic and biotic factors, and concomitant direct and indirect mechanisms, in the study of pathogen transmission and should extend to other generalist pathogens with the capacity for environmental transmission.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Empirical characterization of vertical-tube inlets in hot-water storage tanks

Hot-water storage in residential and commercial tanks is of growing interest for peak-shifting the electrical demand associated with hot-water loads. How the water enters the tank can significantly affect the extraction efficiency of the storage. Vertical-tube inlets (VTIs) direct cold water into the tank. The VTI design influences whether large-scale mixing occurs, which can reduce the delivery capacity of the hot-water storage. In this work, the mixing at the VTI discharge was characterized by the eddy diffusivity factor (EDF) in an allometric curve fit to the ratio Re:Ri using inlet superficial velocities. The full experimental campaign tested VTI's with Re’s between 170 and 22,300 and Ri's between 0 and 376. Animated visualization of the experimentally measured data is provided, showing tank temperature evolution during inlet flows. The most predictive correlations for EDF are for VTI Re in the transition zone (i.e. ~2300 < Re < ~10,000) and at a Ri corresponding to a stably stratified tank (i.e. Ri > 5). For vertical-tubes that distribute cold water below the thermocline, increasing the EDF will decrease the stratification in a hot-water tank as EDF quantifies inlet mixing. Overall, the new correlations for VTIs can be used to design and model thermally-stratified storage tanks.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Adsorption and Chromatographic Behavior of Dispersed Sodium Bismuthate Systems for the Separation of Americium from Curium

The selective partitioning of americium (Am) and curium (Cm) is integral for nuclear science areas such as the nuclear fuel cycle, stockpile stewardship, and isotope production but remains a long-standing radioanalytical challenge due to nearly identical chemical properties. Differences in redox chemistry can be exploited since Am can be oxidized to the hexavalent oxidation state. Sodium bismuthate (NaBiO 3 ) exhibits favorable oxidation and ion exchange characteristics conducive to a rapid and efficient Am/Cm chromatographic separation. Contact of nitric acid with NaBiO 3 was shown to significantly decrease the nitric acid concentration and solution volume. The adsorption, kinetic, and chromatographic behavior of Am and Cm in systems that disperse NaBiO3 in filter aids was evaluated. Further, dispersion of NaBiO 3 increased separation factors to over 100, with rapid kinetics achieved within 1 min of contact and sustained for at least 2 h. The adsorption capacity was more than doubled from 0.066 mequiv g –1 for solid NaBiO 3 alone to 0.149(6) and 0.156(9) meq g –1 when dispersed in Celite 545 and silica gel, respectively. Complete separation was achieved in all systems with ~100% recovery in the respective eluted fractions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sampling Subjective Polygons for Patch-Based Deep Learning Land-Use Classification in Satellite Images

Model generalization remains a key challenge in the analysis of large amounts of heterogeneous satellite image data. One major limiting factor in developing generalizable models, in the context of supervised learning, is the lack of high quality training datasets. A model's capacity to perform well on new data is often inhibited by imbalance and bias in the data that was used for training. This is especially a problem when using convolutional neural networks to classify urban land-use in satellite images. Notable dataset imbalance issues in this application include land-use type imbalance and image scene imbalance. To begin understanding these dataset imbalance problems in more detail, we develop and test a number of sampling methods for generating training image datasets from subjective training polygons for urban land-use classification. We investigate sampling at different point densities as a means to reduce content repetition and therefore content imbalance and bias in the training image dataset.

Arndt, Jacob↗
DOE OSTI2024

Accelerated Aging of a Polymer-Supported Molecular Amine Direct Air Capture Sorbent: Experiments and Theory

Amine-functionalized polymer sorbents are the preferred materials for CO2 extraction from air (DAC) due to their “high” CO2 adsorption capacity and selectivity at ultra-dilute conditions. The lifetime of adsorbents is a key property of equal importance as adsorption capacity, selectivity and kinetics with direct impact on the economics of commercial-scale operations. Therefore, a detailed investigation into the contributing factors (e.g. temperature, humidity) as well as the mechanism of amine degradation is vital for the development of amines with long-term stability. Herein, in situ attenuated total reflection (ATR) Fourier transform infrared spectroscopy (FTIR) is used to monitor the real time changes to amine-based sorbents under systematically varied conditions. In addition, IR spectra obtained from density functional theory molecular dynamics are used to obtain mechanistic insights pertaining to the degradation of amine groups in DAC sorbents.

Muldoon, Patrick↗
DOE OSTI2024

Analysis of heat and mass transfer potential of a dew-point cooling tower in different climatic conditions

In this study, the performance of the Dew-Point Cooling Tower (DPCT) was analyzed for different factors in a variety of climate conditions. For this purpose, a dedicated numerical model describing heat and mass transfer processes was developed and validated. The results of the numerical simulations allowed to analyze the potential of utilizing the heat and mass transfer process with the dew-point phenomenon for water cooling. It was established that the operational parameters that have a high impact on the performance of the DPCT are: inlet water temperature and inlet air humidity ratio. It was also established that DPCT achieves the highest COP and Specific Cooling Capacity for cold subtropical highland climates and that it achieves highest Wet-bulb Effectiveness for monsoon-influenced humid subtropical climates. In conclusion, the regions where all the efficiency factors achieved above-average values included warm, arid, and desert climates.

42 ENGINEERING↗
DOE OSTI2022

Enhancing Cycling Stability and Capacity Retention of NMC811 Cathodes by Reengineering Interfaces via Electrochemical Fluorination

High-capacity cathodes (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ) that can boost the energy density of lithium-ion batteries are promising candidates for vehicle electrification. However, several factors specific to high energy density materials entailing electrode reactions inhibit their application. Fluorination has shown a promising ability to combat the detrimental electrochemical performances of cathode materials, however, it remains difficult to achieve the desired functionality. In this work, a novel electrochemical fluorination (ECF) that demonstrates a promising electrochemical performance enhancement via stabilization of the cathode–electrolyte-interphase (CEI) by forming conformal LiF is proposed. Besides LiF surface layer formation, ECF reduces the degree of fluorination-induced Ni/Li disordering and enhances the layered structural stability as probed by X-ray diffraction. Because of the robust CEI, ECF-NMC811 cathodes deliver 203.0 mAh g -1 first discharge capacity at the current rate of C/10, with ≈98% capacity retention up to 100 cycles. Similarly, it delivers ≈180 mAh g -1 capacity at a 1 C rate with 86.4% capacity retention up to 200 cycles with average coulombic efficiency of > 99.5%. Comprehensive characterization with a multitude of probes reveals that ECF enhances the cycling stability of the electrode without altering bulk structure and morphology.

25 ENERGY STORAGE↗
DOE OSTI2020

Ternary Phase Diagram of Water/Bio-Oil/Organic Solvent for Bio-Oil Fractionation

Separating bio-oil by fractionation with different chemical composition is a critical step to refine these oils and obtain high value products. Cold-water precipitation of pyrolytic lignin from bio-oil is the most common approach used. However, the obtained aqueous phase from this method still contain phenols, is diluted and difficult to use. In this study, the use of liquid-liquid extraction with different solvents (1-butanol, ethyl acetate, 1-octanol, dichloromethane, toluene, and hexane) for the separation of targeted molecules (lignin oligomers, sugars, acetic acid) is explored. Ternary phase diagrams for the organic solvent/water/bio-oil are reported. The partition coefficient of compounds of interest (both light and heavy fraction) is reported for the liquid-liquid equilibrium zone. When using butanol as solvent, the highest separation factor of total phenols over total sugars was observed. Furthermore, our results provide information to design L-L separation units with the capacity to selectively recover targeted molecules from pyrolysis oils.

09 BIOMASS FUELS↗
DOE OSTI2021

Near-term transition and longer-term physical climate risks of greenhouse gas emissions pathways

Policy, business, finance and civil society stakeholders are increasingly looking to compare future emissions pathways across both their associated physical climate risks stemming from increasing temperatures and their transition climate risks stemming from the shift to a low-carbon economy. Herein, we present an integrated framework to explore near-term (to 2030) transition risks and longer-term (to 2050) physical risks, globally and in specific regions, for a range of plausible greenhouse gas emissions and associated temperature pathways, spanning 1.5–4 °C levels of long-term warming. By 2050, physical risks deriving from major heatwaves, agricultural drought, heat stress and crop duration reductions depend greatly on the temperature pathway. By 2030, transition risks most sensitive to temperature pathways stem from economy-wide mitigation costs, carbon price increases, fossil fuel demand reductions and coal plant capacity reductions. Considering several pathways with a 2 °C target demonstrates that transition risks also depend on technological, policy and socio-economic factors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Strong magnetocaloric effect induced by spin reorientation transitions in epitaxial Ho thin films

In this work, magnetocaloric effect (MCE) in an antiferromagnetic holmium (Ho) film is studied near the spin reorientation temperatures. A series of magnetization isotherms from 60 to 150 K around the Néel temperature, $T_N$ ≈ 130 K were recorded for both in-plane and out-of-plane magnetic field orientations. A change in entropy, Δ$S_M$ of –5 J/kgK was found near $T_N$ for an in-plane field orientation. A large change in Δ$S_M$ of –11.8 J/kg K due to a fan-helix spin transition at $\textit{T}$ = 90 K is observed for an in-plane field orientation. Spin transition at both $T_N$ and at the fan-helix transition exhibit larger MCE in the in-plane field orientations in comparison with the perpendicular orientation. The value of the refrigerant capacity extracted from the temperature dependence of Δ$S_M(T)$ is found to be larger for the “in- plane” orientation by a factor of two.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Market Implications of Alternative Operating Reserve Modeling in Wholesale Electricity Markets

Pricing and settlement mechanisms are crucial for efficient resource allocation, investment incentives, market competition, and regulatory oversight. In the United States, Regional Transmission Operators (RTOs) adopts a uniform pricing scheme that hinges on the marginal costs of supplying additional electricity. This study investigates the pricing and settlement impacts of alternative reserve constraint modeling, highlighting how even slight variations in the modeling of constraints can drastically alter market clearing prices, reserve quantities, and revenue outcomes. Focusing on the diverse market designs and assumptions in ancillary services by U.S. RTOs, particularly in relation to capacity sharing and reserve substitutions, the research examines four distinct models that combine these elements based on a large-scale synthetic power system test data. Our study provides a critical insight into the economic implications and the underlying factors of these alternative reserve constraints through market simulations and data analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Intra-canopy leaf trait variation facilitates high leaf area index and compensatory growth in a clonal woody encroaching shrub

Leaf trait variation enables plants to utilize large gradients of light availability that exist across canopies of high leaf area index (LAI), allowing for greater net carbon gain while reducing light availability for understory competitors. While these canopy dynamics are well understood in forest ecosystems, studies of canopy structure of woody shrubs in grasslands are lacking. To evaluate the investment strategy used by these shrubs, we investigated the vertical distribution of leaf traits and physiology across canopies of Cornus drummondii, the predominant woody encroaching shrub in the Kansas tallgrass prairie. We also examined the impact of disturbance by browsing and grazing on these factors. Our results reveal that leaf mass per area (LMA) and leaf nitrogen per area (Na) varied approximately threefold across canopies of C. drummondii, resulting in major differences in the physiological functioning of leaves. High LMA leaves had high photosynthetic capacity, while low LMA leaves had a novel strategy for maintaining light compensation points below ambient light levels. The vertical allocation of leaf traits in C. drummondii canopies was also modified in response to browsing, which increased light availability at deeper canopy depths. As a result, LMA and Na increased at lower canopy depths, leading to a greater photosynthetic capacity deeper in browsed canopies compared to control canopies. This response, along with increased light availability, facilitated greater photosynthesis and resource-use efficiency deeper in browsed canopies compared to control canopies. Furthermore, our results illustrate how C. drummondii facilitates high LAI canopies and a compensatory growth response to browsing—both of which are key factors contributing to the success of C. drummondii and other species responsible for grassland woody encroachment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Enhanced CO 2 Adsorption Capacity in Highly Porous Carbon Materials Derived from Melamine-Formaldehyde Resin

Here, the present study explores the synthesis of N-doped carbon materials with large surface porosity using commercial melamine-formaldehyde resin as the precursor and KOH as the activator. The resin was carbonized first and then activated by KOH with varying KOH amount and activation temperature. Notably, the as-obtained sorbents display advanced porosity with the highest surface area and pore volume of 1591 m 2 /g and 0.74 cm 3 /g, respectively, along with high N content ranging from 6.43 to 18.34 wt %. Remarkably, maximum CO 2 capture amounts of 5.42 and 3.52 mmol/g were accomplished at 0 and 25 degrees C, 1 bar for as-synthesized carbons. Systematic studies point out that narrow microporosity is the major factor determining the CO 2 uptake of these carbons under ambient pressure. Furthermore, these sorbents display notable CO 2 selectivity, rapid adsorption kinetics, moderate heat of adsorption, substantial dynamic CO 2 capture capacity, and stable recyclability. These results underscore the potential of melamine-formaldehyde resin-derived N-doped porous carbon as an efficient and versatile adsorbent for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The role of nuclear in China’s energy future: insights from integrated assessment

China, the world’s largest electricity consumer, has strong motivations to deploy nuclear power due to increasing electricity demand and environmental concerns. However, there are social, institutional, and technical barriers to future nuclear expansion. This paper provides an updated assessment of nuclear energy potential in China with analyses at both national and provincial levels and compares results with studies previously conducted. Using an integrated assessment model, this paper considers the interactions among different socioeconomic development pathways, technology options, climate policies, and social/political concerns on inland siting. Among all factors explored, climate policies have the most significant impact on accelerating the deployment of nuclear technologies. Inland siting of nuclear power plants increases total capacity, but the impact is limited without climate policy. The amount of annual nuclear generation across scenarios and studies is unlikely to rise above 11% by 2030 and 30% by 2050 of total Chinese electricity generation. A dramatic increase in total Chinese nuclear energy generating capacity – around 3900 TWh of nuclear generation by 2050 – is only possible in scenarios where China sees electricity demand increase substantially, sticks to and tightens its current Paris Accord commitments, achieves low costs of nuclear technologies, and allows inland siting of nuclear power plants.

China, integrated assesment, Nuclear Power Plants↗
DOE OSTI2020

Towards a Deeper Understanding of Automation Transparency in the Operation of Nuclear Plants

Automation technologies have the potential to reduce operations and maintenance costs, ensure reliable power generation and safety, and thereby contribute to extending the lifespan of nuclear power plants. To fulfill this aspiration, automation behaviors have to be understandable and predictable to human operators and traceable for license holders and regulators in the event of automation failures. The current report investigates how automation transparency as a systems design principle can keep operators sufficiently informed about the inner workings of automation or make fail-safe automation run invisibly in the background to free up operator capacity.

99 GENERAL AND MISCELLANEOUS↗