Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “barrier method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterizing Electrode Materials and Interfaces in Solid-State Batteries

Solid-state batteries (SSBs) could offer improved energy density and safety, but the evolution and degradation of electrode materials and interfaces within SSBs are distinct from conventional batteries with liquid electrolytes and represent a barrier to performance improvement. Over the past decade, a variety of imaging, scattering, and spectroscopic characterization methods has been developed or used for characterizing the unique aspects of materials in SSBs. These characterization efforts have yielded new understanding of the behavior of lithium metal anodes, alloy anodes, composite cathodes, and the interfaces of these various electrode materials with solid-state electrolytes (SSEs). This review provides a comprehensive overview of the characterization methods and strategies applied to SSBs, and it presents the mechanistic understanding of SSB materials and interfaces that has been derived from these methods. This knowledge has been critical for advancing SSB technology and will continue to guide the engineering of materials and interfaces toward practical performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Transforming Boron Carbon Nitride: A Carbon-to-Oxygen Switch to Boost Propane Oxidative Dehydrogenation

Hexagonal boron nitride (h-BN) catalysts exhibit high alkene selectivity in the oxidative dehydrogenation of propane (ODHP). Nevertheless, the conversion-selectivity trade-off persisted primarily due to the low density of oxygen-containing boron active species, while simple and controllable modification strategies for h-BN still face challenges. Herein, we developed an in situ carbon-to-oxygen switch strategy within a tailored boron carbon nitride (BCN) framework, in which uniformly embedded B–C 3 were transformed into B–O 3 via oxidative treatment (denoted as BNO x ). The structural evolution from B–C 3 to B–O 3 was well characterized by spectroscopy and soft X-ray absorption techniques. The resulting BNO x catalysts, enriched with B–O 3 units, demonstrated performance in ODHP, achieving a propane conversion of 50.4% with 32.7% olefin yield at 500 °C. Density functional theory (DFT) calculations confirmed that B–O 3 species preferentially lower activation barriers, rendering the process thermodynamically more favorable. In conclusion, this work introduced an in situ reconstruction method for atomic-level heteroatom-engineered h-BN catalysts, opening an avenue for advanced catalyst design across energy conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Competitive formation of intercalated versus supported metal nanoclusters during deposition on layered materials with surface point defects

Intercalated metal nanoclusters (NCs) can be formed under the surface of graphite after sputtering to generate surface “portal” defects that allow deposited atoms to reach the subsurface gallery. Although, there is a competition between formation of supported NCs on top of the surface and intercalated NCs under the surface, the latter only dominating at sufficiently high temperature. A stochastic model incorporating appropriate system thermodynamics and kinetics is developed to capture this complex and competitive nucleation and growth process. Kinetic Monte Carlo simulation shows that the model captures experimental trends observed for Cu and other metals and reveals that higher temperatures are needed to facilitate detachment of atoms from supported NCs enabling them to reach the gallery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deterministic Quantum Trajectory via Imaginary Time Evolution

Stochastic quantum trajectories, such as pure state evolutions under unitary dynamics and random measurements, offer a crucial ensemble description of many-body open system dynamics. Recent studies have highlighted that individual quantum trajectories also encode essential physical information. Prominent examples include measurement-induced phase transitions, where a pure quantum state corresponding to fixed measurement outcomes (trajectories) exhibits distinct entanglement phases, depending on the measurement rate. However, direct observation of this effect is hindered by an exponential postselection barrier, whereby the probability of realizing a specific trajectory is exponentially small. We propose a deterministic method to efficiently prepare quantum trajectories in polynomial time using imaginary time evolution and, thus, overcome this fundamental challenge. Here, we demonstrate that our method applies to a certain class of quantum states, and argue that universal approaches do not exist for any quantum trajectories. Our result paves the way for experimentally exploring the physics of individual quantum trajectories at scale and enables direct observation of certain postselection-dependent phenomena.

Mittal, Shivan [Los Alamos National Laboratory (LA↗
DOE OSTI2021

Rapid Alloy Surface Engineering through Closed-Vessel Reagent Pyrolysis

For rapid surface engineering of Cr-containing alloys by low-temperature nitrocarburization, we introduce a process based on pyrolysis of solid reagents, e.g., urea, performed in an evacuated closed vessel. Upon heating to temperatures high enough for rapid diffusion of interstitial solute, but low enough to avoid second-phase precipitation, the reagent is pyrolyzed to a gas atmosphere containing molecules that (i) activate the alloy surface by stripping away the passivating Cr 2 O 3 -rich surface film (diffusion barrier) and (ii) rapidly infuse carbon and nitrogen into the alloy. We demonstrate quantitatively that this method can generate a subsurface zone with concentrated carbon and nitrogen comparable to what can be accomplished by established (e.g., gas-phase- or plasma-based) methods, but with significantly reduced processing time. As another important difference to established gas-phase processing, the interaction of gas molecules with the alloy surface can have auto-catalytic effects by altering the gas composition in a way that accelerates solute infusion by providing a high activity of HNCO. The new method lends itself to rapid experimentation with a minimum of laboratory equipment.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Design and fabrication of a flexible tunnel for Sortie Laboratory

A program was conducted to update a prototype design and to fabricate a flexible tunnel for a space shuttle/spacelab interface structure. The significant changes in the prototype are as follows: (1) elimination of foam from bladder laminate to increase bladder flexibility, (2) heat treat pulley brackets, bolts, and hinge pin to 160,000 psi minimum tensile strength, and (3) reduction of the meteoroid barrier from 0.5 inch to 0.375 inch. The thermal blanket installation study resulted in developing a method of installation by properly folding the various layers so that a uniform thickness could be maintained under the clamps. A single-lobe mockup was fabricated and cycled open and closed several times with no apparent damage to the blanket.

Source record↗
NASA NTRS1982

Interface control and mechanical property improvements in silicon carbide/titanium composites

Several composite systems made of titanium matrix reinforced with silicon carbide fiber were investigated to obtain a better understanding of composite-degradation mechanisms and to develop techniques to minimize loss of mechanical properties during fabrication and in service. Emphasis was on interface control by fiber or matrix coatings. X-ray diffraction studies on planar samples showed that the formation of titanium silicides was greatly inhibited by the presence of aluminum or Ti3A1 layers at the fiber-matrix interface, with the Ti3A1 being more effective in reducing the reactions. Fiber studies showed that coating the fiber with a 1-micron-thick layer of aluminum improved the as-fabricated strength of a stoichiometric SiC fiber and reduced the fiber degradation during exposure to composite-fabrication conditions. Applying an interfacial barrier by coating the matrix foils instead of the fibers was found to be an effective method for improving composite strength. Reducing the fabrication temperature also resulted in significant improvements in composite strengths. Good-quality, well-consolidated composites were fabricated at temperatures well below those currently used for SiC-Ti composite fabrication.

Brewer, W. D.↗
NASA NTRS1986

Plasma-Sprayed Coatings on Porous Surfaces

Need for combining benefits of duplex thermal-barrier coatings with film cooling on gas-turbine vanes and blades stimulated development of improved method for plasma spraying these coatings. Method reduces blocking of holes by plasma-sprayed material and at same time reduces base-metal oxidation during coating operation. Features provide potential for increased engine efficiency and power, reduced fuel consumption, use of less costly materials or construction procedures, and extended life and durability.

Leibert, C. H.↗
NASA NTRS1987

Method and means for generation of tunable laser sidebands in the far-infrared region

A method for generating tunable far-infrared radiation is described. The apparatus includes a Schottky-barrier diode which has one side coupled through a conductor to a waveguide that carries a tunable microwave frequency; the diode has an opposite side which is coupled through a radiating whisker to a bias source. Infrared light is directed at the diode, and infrared light with tunable sidebands is radiated by the whisker through an open space to a reflector. The original infrared is separated from a tunable infrared sideband by a polarizing Michelson interferometer.

Pickett, Herbert M.↗
NASA NTRS1998

Thermal Barrier Coating Workshop, 1997

This document contains papers from the 1997 Thermal Barrier Coatings Workshop, sponsored by the TBC Interagency Coordination Committee. The Workshop was held in Fort Mitchell, Kentucky, May 19-21, 1997. The papers cover the topics of heat transfer and conductivity of thermal barrier coatings, failure mechanisms and characterization of the coatings as well as characterization of coating deposition methods. Speakers included research, development and user groups in academia, industry and government.

Brindley, William J.↗
NASA NTRS2000

Composite Tank Development

This paper presents viewgraphs on composite tank development. There is a need for oxidizer tanks and reliable, lightweight fuel. The need for cost-effective and scalable manufacturing is also evident. In order to achieve these goals, tooling methods for tank development must be applied, methods for producing easily adaptable and scalable vessel liners must be developed, insulation layer or protective barriers for containers must be manufactured, and an appropriate fiber/resin system for composite overwrap structures must be identified.

DeLay, Thomas K.↗
NASA NTRS2013

Methods and apparatus for microwave tissue welding for wound closure

Methods and apparatus for joining biological tissue together are provided. In at least one specific embodiment, a method for joining biological tissue together can include applying a biological solder on a wound. A barrier layer can be disposed on the biological solder. An antenna can be located in proximate spatial relationship to the barrier layer. An impedance of the antenna can be matched to an impedance of the wound. Microwaves from a signal generator can be transmitted through the antenna to weld two or more biological tissue pieces of the wound together. A power of the microwaves can be adjusted by a control circuit disposed between the antenna and the signal generator. The heating profile within the tissue may be adjusted and controlled by the placement of metallic microspheres in or around the wound.

Arndt, G. Dickey↗
NASA NTRSDate not supplied

Temperature Sensing to Above 1500 °C Using Y 2 SiO 5 :Er Phosphor Thermometry

A transition from metallic to ceramic turbine components that can operate at higher turbine engine temperatures will push component surface temperatures from below 1200 °C into a 1300 to 1500 °C temperature range that is much more challenging for phosphor thermometry measurements. To address this challenge, Y 2 SiO 5 :Er was selected for its high temperature sensing performance by both luminescence lifetime and luminescence intensity ratio (LIR) methods as well as its thermochemical compatibility with the current generation of rare earth silicate environmental barrier coatings (EBCs) that are required to protect SiC/SiC ceramic composite components. Lifetime measurements that monitor the Er3+ 4S3/2→4I15/2 emission decay at 542 nm exhibited a slow decrease in decay time with temperature up to 1300° C, above which the decay decreased steeply to provide good temperature sensitivity in the 1300 to 1500 °C range (Fig. 1). LIR images were obtained where each pixel represented the ratio I488/I561 (I488 and I561 are the detected 488 nm 4F7/2→4I15/2 and the 561 nm 4S3/2→4I15/2 emission band intensities, respectively). Good temperature sensitivity (Fig. 2) and signal-to-background ratios were observed to above 1500 °C. Contrary to conventional guidance on selecting phosphors for high temperature sensing, the detected emission band intensities and decay times exhibited remarkably slow decreases with temperature up into the 1300 to 1500 °C range despite high phonon energies (>900 cm-1) that allow the energy gap between the 4S3/2 emitting reservoir level and the 4F9/2 level below it to be bridged by as few as three phonons. The benefits of utilizing a thermographic phosphor at very high temperatures that exhibits strong nonradiative multiphonon relaxation even at room temperature is explained by a competition between spontaneous and stimulated multiphonon emission, and the more temperature-sensitive decay time above 1300 °C is explained by a transition from high to low effective phonon energies.

temperature measurement↗
DOE OSTI2020

National Mandates Won’t Save Us!: How to Design Energy Efficiency Policies that Address Institutional Barriers to Change

There are many national policies aimed at driving an increase in energy efficiency (EE) implementation. But how effective are they? Over the past 20 years, the U.S. government has established five legal authorities mandating federal agencies to prioritize energy-efficient products when purchasing. As the largest single buyer of energy-consuming products, energy-efficient purchasing across the federal sector would result in huge energy savings and emissions reductions. Despite this, our research has found that only ~55% of federal purchases currently meet existing requirements. If national mandates are not enough to ensure that federal agencies are buying efficient products, what is? To answer this question, we surveyed 161 procurement and sustainability staff from 26 different federal agencies. Findings revealed that several institutional factors (i.e., the roles, rules, and tools within an organization) play a key role in determining how likely federal buyers are to prioritize EE. Ensuring that federal agencies comply with existing EE requirements is foundational to achieving a clean energy future. This will require more than national mandates, but also the design of policies that successfully identify and address the institutional factors that must be changed in order to increase EE implementation. This paper presents an overview of the data collection and analysis methods for our study, as well as key survey findings and the insights they offer for overcoming institutional barriers to compliance with existing EE requirements. We conclude by discussing how these strategies can be broadly applied to improve the design of EE policies in the U.S. and beyond.

Morabito, Molly↗
NASA NTRS1994

An Acoustic Charge Transport Imager for High Definition Television Applications: Reliability Modeling and Parametric Yield Prediction of GaAs Multiple Quantum Well Avalanche Photodiodes

Reliability modeling and parametric yield prediction of GaAs/AlGaAs multiple quantum well (MQW) avalanche photodiodes (APDs), which are of interest as an ultra-low noise image capture mechanism for high definition systems, have been investigated. First, the effect of various doping methods on the reliability of GaAs/AlGaAs multiple quantum well (MQW) avalanche photodiode (APD) structures fabricated by molecular beam epitaxy is investigated. Reliability is examined by accelerated life tests by monitoring dark current and breakdown voltage. Median device lifetime and the activation energy of the degradation mechanism are computed for undoped, doped-barrier, and doped-well APD structures. Lifetimes for each device structure are examined via a statistically designed experiment. Analysis of variance shows that dark-current is affected primarily by device diameter, temperature and stressing time, and breakdown voltage depends on the diameter, stressing time and APD type. It is concluded that the undoped APD has the highest reliability, followed by the doped well and doped barrier devices, respectively. To determine the source of the degradation mechanism for each device structure, failure analysis using the electron-beam induced current method is performed. This analysis reveals some degree of device degradation caused by ionic impurities in the passivation layer, and energy-dispersive spectrometry subsequently verified the presence of ionic sodium as the primary contaminant. However, since all device structures are similarly passivated, sodium contamination alone does not account for the observed variation between the differently doped APDs. This effect is explained by the dopant migration during stressing, which is verified by free carrier concentration measurements using the capacitance-voltage technique.

Hunt, W. D.↗
DOE OSTI2020

Mass-asymmetric fission of 205,207,209 Bi at energies close to the fission barrier using proton bombardment of 204,206,208 Pb

Background: Recent observation of mass-asymmetric fission in neutron-deficient Hg and Pt nuclei has reignited interest in fission fragment mass distributions close to Pb. Investigations at energies close to the fission barrier, where mass-asymmetric fission is expected to be most obvious and the sensitivity to shell effects is maximized, are limited in this mass region. Purpose: To measure fission mass distributions for 205,207,209 Bi nuclei at the lowest possible excitation energies to determine how the mass distributions change with excitation energy and the neutron number of the compound nucleus. Method: Proton beams bombarding targets of 204,206,208 Pb were used to study the fission of 205,207,209 Bi at energies from just above to 10 MeV above their fission barriers. Fission fragments were measured using the CUBE fission spectrometer. Fission fragment mass distributions were determined using a newly developed time difference analysis method. Mass distributions were characterized by triple-Gaussian fits to determine the systematic trends across each isotope with excitation energy. Results: Measured mass distributions of all three Bi isotopes exhibit a component of mass-asymmetric fission at all energies studied. The probability of mass-asymmetric fission decreases significantly with increasing excitation energy, from ≈70 to ≈40% over a 10-MeV range. Comparisons between the three Bi isotopes hint at an increase in the mass-symmetric fission yield with increasing neutron number, which could be due to a decrease in the difference between the symmetric and asymmetric fission barriers. The centroids of the mass-asymmetric peaks suggest that several deformed shell gaps in the fission fragments could be contributing to the presence of the mass-asymmetric fission mode with Z light ≃ 38, Z heavy ≃ 45, and N light ≃ 56 all present in the fission fragments. Conclusions: Measurements of fission mass distributions at the lowest possible excitation energies above the fission barrier provide an excellent platform to investigate the origins of the mass-asymmetric fission mode. Finally, further systematic measurements at these energies offer an opportunity to rigorously test new models of fission in this mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2004

Method of depositing a coating on Si-based ceramic composites

A process of depositing a coating system suitable for use as an environmental barrier coating on various substrate materials, particularly those containing silicon and intended for high temperature applications such as the hostile thermal environment of a gas turbine engine. The process comprises depositing a first coating layer containing mullite, and preferably a second coating layer of an alkaline earth aluminosilicate, such as barium-strontium-aluminosilicate (BSAS), by thermal spraying while maintaining the substrate at a temperature of 800.degree. C. or less, preferably 500.degree. C. or less, by which a substantially crack-free coating system is produced with desirable mechanical integrity.

Wang, Hongyu↗
NASA NTRS1997

Microstructure and Mechanical Properties of Vacuum Plasma Sprayed Cu-8Cr-4Nb

This paper compares the tensile properties of Cu-8Cr-4Nb material produced by VPS to material previously produced by extrusion. The microstructure of the VPS material is also presented. The combustion chamber liner of rocket motors represents an extreme materials application. The liner hot wall is exposed to a 2760 C (5000 F) flame while the cold side is exposed to cryogenic hydrogen liquid. Materials for use in the combustion chamber liner require a combination of high temperature strength, creep resistance, and low cycle fatigue resistance along with high thermal conductivity. The hot side is also subject to localized cycles between reducing and oxidizing environments that degrade the liner by a process called blanching. A new Cu-8 at.% Cr-4 at% Nb (Cu-8Cr-4Nb) alloy has been developed at NASA Lewis Research Center as a replacement for the currently used alloy, NARloy-z (Cu-3 wt.% Ag-0.5 wt.% Zr). The alloy is strengthened by a fine dispersion of Cr2Nb particles. The alloy has better mechanical properties than NARloy-Z while retaining most of the thermal conductivity of pure copper. The alloy has been successfully consolidated by extrusion and hot isostatic pressing (HIPing). However, vacuum plasma spraying (VPS) offers several advantages over prior consolidation methods. VPS can produce a near net shape piece with the profile of the liner. In addition, oxidation resistant and thermal barrier coatings can be incorporated as an integral part of the liner hot wall during the VPS deposition. The low oxygen VPS Cu-8Cr-4Nb exhibits a higher strength than Cu-8Cr-4Nb produced by extrusion at elevated temperatures and a comparable strength at room temperature. Moduli and ductility were not significantly different. However, the ability to produce parts to near-net shape and maintain the good elevated temperature tensile properties of the extruded Cu-8Cr-4Nb makes VPS an attractive processing method for fabricating rocket engine combustion liners.

Holmes, Richard↗