Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “background model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Debris hazard for the Earth Observing System

The scientific mission of the Earth Observing System (EOS) is modeled to analyze the potential hazard of space debris and its impact on the effectiveness of the program. Specific attention is given to the hazard posed by untrackable debris and the velocities and impact rates of such debris. The NASA Debris Flux Model (DFM) is utilized, and the results are compared to those of the Frag model which predicts the background environment from known parameters and the Screen model for estimating collision probabilities. The probability of damaging impacts is shown to be significant and to increase over time; an EOS spacecraft has a 10 percent chance of being struck by a 1-cm object traveling at 14 km/s. The present analyses demonstrate the need to design the EOS spacecraft for a LEO environment in which collisions with debris are very likely.

Madler, Ronald A.↗

Search for light long-lived neutral particles from Higgs boson decays via vector-boson-fusion production from pp collisions at $\sqrt{s}=13$ TeV with the ATLAS detector

A search is reported for long-lived dark photons with masses between 0.1 GeV and 15 GeV, from exotic decays of Higgs bosons produced via vector-boson-fusion. Events that contain displaced collimated Standard Model fermions reconstructed in the calorimeter or muon spectrometer are probed. This search uses the full LHC Run 2 (2015–2018) data sample collected in proton–proton collisions at $\sqrt{s}=13$ TeV, corresponding to an integrated luminosity of 139 fb –1 . Dominant backgrounds from Standard Model processes and non-collision sources are estimated using data-driven techniques. The observed event yields in the signal regions are consistent with the expected background. Upper limits on the Higgs boson to dark photon branching fraction are reported as a function of the dark photon mean proper decay length or of the dark photon mass and the coupling between the Standard Model and the potential dark sector. This search is combined with previous ATLAS searches obtained in the gluon–gluon fusion and WH production modes. A branching fraction above 10% is excluded at 95% CL for a 125 GeV Higgs boson decaying into two dark photons for dark photon mean proper decay lengths between 173 and 1296 mm and mass of 10 GeV.

Aad, G. (ORCID:0000000266654934)↗

Adaptive Modeling of the International Space Station Electrical Power System

Software simulations provide NASA engineers the ability to experiment with spacecraft systems in a computer-imitated environment. Engineers currently develop software models that encapsulate spacecraft system behavior. These models can be inaccurate due to invalid assumptions, erroneous operation, or system evolution. Increasing accuracy requires manual calibration and domain-specific knowledge. This thesis presents a method for automatically learning system models without any assumptions regarding system behavior. Data stream mining techniques are applied to learn models for critical portions of the International Space Station (ISS) Electrical Power System (EPS). We also explore a knowledge fusion approach that uses traditional engineered EPS models to supplement the learned models. We observed that these engineered EPS models provide useful background knowledge to reduce predictive error spikes when confronted with making predictions in situations that are quite different from the training scenarios used when learning the model. Evaluations using ISS sensor data and existing EPS models demonstrate the success of the adaptive approach. Our experimental results show that adaptive modeling provides reductions in model error anywhere from 80% to 96% over these existing models. Final discussions include impending use of adaptive modeling technology for ISS mission operations and the need for adaptive modeling in future NASA lunar and Martian exploration.

Thomas, Justin Ray↗

Predicting Intensive Care Unit Length of Stay and Mortality Using Patient Vital Signs: Machine Learning Model Development and Validation

Background: Patient monitoring is vital in all stages of care. In particular, intensive care unit (ICU) patient monitoring has the potential to reduce complications and morbidity, and to increase the quality of care by enabling hospitals to deliver higher-quality, cost-effective patient care, and improve the quality of medical services in the ICU. Objective: We here report the development and validation of ICU length of stay and mortality prediction models. The models will be used in an intelligent ICU patient monitoring module of an Intelligent Remote Patient Monitoring (IRPM) framework that monitors the health status of patients, and generates timely alerts, maneuver guidance, or reports when adverse medical conditions are predicted. Methods: We utilized the publicly available Medical Information Mart for Intensive Care (MIMIC) database to extract ICU stay data for adult patients to build two prediction models: one for mortality prediction and another for ICU length of stay. For the mortality model, we applied six commonly used machine learning (ML) binary classification algorithms for predicting the discharge status (survived or not). For the length of stay model, we applied the same six ML algorithms for binary classification using the median patient population ICU stay of 2.64 days. For the regression-based classification, we used two ML algorithms for predicting the number of days. We built two variations of each prediction model: one using 12 baseline demographic and vital sign features, and the other based on our proposed quantiles approach, in which we use 21 extra features engineered from the baseline vital sign features, including their modified means, standard deviations, and quantile percentages. Results: We could perform predictive modeling with minimal features while maintaining reasonable performance using the quantiles approach. The best accuracy achieved in the mortality model was approximately 89% using the random forest algorithm. The highest accuracy achieved in the length of stay model, based on the population median ICU stay (2.64 days), was approximately 65% using the random forest algorithm. Conclusions: The novelty in our approach is that we built models to predict ICU length of stay and mortality with reasonable accuracy based on a combination of ML and the quantiles approach that utilizes only vital signs available from the patient’s profile without the need to use any external features. This approach is based on feature engineering of the vital signs by including their modified means, standard deviations, and quantile percentages of the original features, which provided a richer dataset to achieve better predictive power in our models.

59 BASIC BIOLOGICAL SCIENCES↗

D$e^+e^-$ffusion: Capturing the Beam-Beam Physics of $e^+e^-$ Collisions with Diffusion Models

Beam-induced backgrounds at high-luminosity $e^+e^-$ colliders, such as the FCC-ee, are dominated by incoherent pair creation (IPC), and require computationally expensive simulations with dedicated Monte Carlo (MC) event generators. Reliable detector and machine-detector interface studies necessitate event samples that are several orders of magnitude larger than what is practically attainable with existing MC. To alleviate this bottleneck, we present D$e^+e^-$ffusion, a denoising diffusion probabilistic model that operates as a permutation-equivariant, set-valued surrogate for fast IPC simulation. Trained on a small GuineaPig++ sample, D$e^+e^-$ffusion faithfully reproduces the marginal and joint kinematic, angular, and positional distributions of all three IPC production processes. In addition, we assess the fidelity at the detector level by propagating both Geant4 and D$e^+e^-$ffusion events through a Geant4 simulation of the CLD vertex detector and by training a transformer-based two-sample classifier; the classifier achieves an area under the ROC curve of $0.553 \pm 0.016$. The trained model generates events nearly four orders of magnitude faster than Geant4, paving the way for a fast-simulation surrogate for FCC-ee design studies.

Chahine, Antonio [Imperial Coll., London]↗

A model of the local region of the galaxy

A two-component model of the local interstellar medium was developed, based on the Radio Astronomy Explorer (RAE-1) satellite observations of the low frequency (0.2 - 10 MHz) galactic radio background spectrum. The model shows evidence for a thick spiral arm and a thick electron disk of 600 and 1200 pc slab thicknesses, respectively. The temperature difference between the north galactic pole and anticenter directions supports the concept of a local positive thermal gradient away from the galactic plane. A preliminary discussion of the influence of the Razin effect on the model is also presented.

Novaco, J. C.↗

Analysis of IRAS solar system dust data

Data in the Infrared Astronomical Satellite (IRAS) Zodiacal History File were analyzed to extract dust band locations and peak brightness measurements from approximately 1,000 individual IRAS scans. The study had three goals. One was to show that the prominent solar system dust bands are associated with Hirayama asteroid families and thus that collisions between asteroids account for a significant fraction of the particles in the zodiacal cloud. Recent work suggests that while the Hirayama families are a major source of the dust in the bands, there may also be contributions from two or three smaller, more recently recognized asteroid families. A second goal was to show that there is evidence in the IRAS dust data for the transport of particles from asteroid belt to the Earth by Poynting-Robertson light drag and thus account for the fact that asteroid particles are collected in the Earth's stratosphere. Results of the study will confirm the location of the dust bands within the inner asteroid belt, and show conclusively that the material seen by IRAS is now spread over a wide range of distances from the sun. The third goal was to construct a model of the background zodiacal cloud that satisfies the proper dynamical constraints. Figures are provided to show the scans processed to remove zodiacal background and Galactic signals, and the resulting polynomial fits to the 25 micron scan. The latter provided objective estimates of band widths, peak locations, and peak fluxes. Modelling and analysis of the resulting band data has been presented at several conferences and is the subject of a number of forthcoming papers.

Dermott, S. F.↗

The soft X-ray background as a supernova blast wave viewed from inside: Solar abundance models

A model of the soft X-ray background is presented in which the Sun is assumed to be inside an active supernova blast wave. The blast wave evolves in a preexisting cavity. The broad band surface brightnesses is explained by such a blast wave with an explosion energy of E sub approx. 5 x 10 to the 50th power ergs and radius 80 to 100 pc, using solar abundances. An approach to treating the problem of large anisotropies in the ambient medium is also explored, accommodating the observed anticorrelation between the soft X-ray surface brightness and the 21 cm column density. It is found that only for post shock temperatures below 10 6 K a shock propagating into a density enhancement will be dimmer than a similar shock in a lower density region.

Edgar, R. J.↗

The soft X-ray background as a supernova blast wave viewed from inside - Solar abundance models

A model of the soft X-ray background is presented in which the sun is assumed to be inside an active supernova blast wave. The blast wave evolves in a preexisting cavity. The broad band surface brightnesses is explained by such a blast wave with an explosion energy of E sub approximately 5 x 10 to the 50th power ergs and radius 80 to 100 pc, using solar abundances. An approach to treating the problem of large anisotropies in the ambient medium is also explored, accommodating the observed anticorrelation between the soft X-ray surface brightness and the 21 cm column density. It is found that only for post shock temperatures below 10 to the 6 power K a shock propagating into a density enhancement will be dimmer than a similar shock in a lower density region.

Edgar, R. J.↗

Dynamical influences on the moment of inertia tensor from lateral viscosity variations inferred from seismic tomographic models

We have investigated the influences of lateral variations of viscosity on the moment of inertia tensor from viscous flows due to the density anomalies in the mantle inferred from seismic tomographic models. The scaling relations between the density and the seismic anomalies is taken as either a constant or a function increasing with depth in accord with the recent high-pressure experimental studies. The viscosity is taken as an exponential function of the 3D density anomaly. In models with an isoviscous background, the effects on the perturbed moment of inertia tensor from the lateral viscosity variations are smaller than those due to variations in the radial viscosity profiles. In mantle models with a background viscosity increasing with depth, the influences of the lateral viscosity variations are significant. The most striking feature in the latter case is that the two off-diagonal elements delta I(sub xz) and delta I(sub yz) in the inertia tensor exhibit greatest sensitivity to lateral variations of the viscosity. While the other elements of the inertia change by only about a few tens of percent in the range of lateral viscosity contrast considered (less than 300), delta I(sub xz) and delta I(sub yz) can vary up to 40 times even with a change in sign, depending on the radial viscosity stratification and the location of the strongest lateral variations. The increase in the velocity-density scaling relation with depth can reduce the influences of the lateral viscosity variations, but it does not change the overall sensitive nature of delta I(sub xz) and delta I(sub yz). This study demonstrates clearly that the lateral viscosity variations, especially in the upper mantle, must be considered in the determination of long-term polar wander, since the variations in the delta I(sub xz) and delta I(sub yz) terms are directly responsible for exciting rotational movements.

Zhang, Shuxia↗

Automated daily processing of more than 1000 ground-based GPS receivers for studying intense ionospheric storms

To take advantage of the vast amount of GPS data, researchers use a number of techniques to estimate satellite and receiver interfrequency biases and the total electron content (TEC) of the ionosphere. Most techniques estimate vertical ionospheric structure and, simultaneously, hardware-related biases treated as nuisance parameters. These methods often are limited to 200 GPS receivers and use a sequential least squares or Kalman filter approach. The biases are later removed from the measurements to obtain unbiased TEC. In our approach to calibrating GPS receiver and transmitter interfrequency biases we take advantage of all available GPS receivers using a new processing algorithm based on the Global Ionospheric Mapping (GIM) software developed at the Jet Propulsion Laboratory. This new capability is designed to estimate receiver biases for all stations. We solve for the instrumental biases by modeling the ionospheric delay and removing it from the observation equation using precomputed GIM maps. The precomputed GIM maps rely on 200 globally distributed GPS receivers to establish the ''background'' used to model the ionosphere at the remaining 800 GPS sites.

total electron content (TEC)↗

Cosmological constraints from DES Y1 cluster abundances and SPT multiwavelength data

We perform a joint analysis of the counts of redMaPPer clusters selected from the Dark Energy Survey (DES) year 1 data and multiwavelength follow-up data collected within the 2500 deg2 South Pole Telescope (SPT) Sunyaev-Zel’dovich (SZ) survey. The SPT follow-up data, calibrating the richness-mass relation of the optically selected redMaPPer catalog, enable the cosmological exploitation of the DES cluster abundance data. To explore possible systematics related to the modeling of projection effects, we consider two calibrations of the observational scatter on richness estimates: a simple Gaussian model which account only for the background contamination (BKG), and a model which further includes contamination and incompleteness due to projection effects (PRJ). Assuming either a ΛCDM+∑mν or wCDM+∑mν cosmology, and for both scatter models, we derive cosmological constraints consistent with multiple cosmological probes of the low and high redshift Universe, and in particular with the SPT cluster abundance data. This result demonstrates that the DES Y1 and SPT cluster counts provide consistent cosmological constraints, if the same mass calibration data set is adopted. It thus supports the conclusion of the DES Y1 cluster cosmology analysis which interprets the tension observed with other cosmological probes in terms of systematics affecting the stacked weak lensing analysis of optically selected low–richness clusters. Finally, we analyze the first combined optically SZ selected cluster catalog obtained by including the SPT sample above the maximum redshift probed by the DES Y1 redMaPPer sample (z=0.65). Besides providing a mild improvement of the cosmological constraints, this data combination serves as a stricter test of our scatter models: the PRJ model, providing scaling relations consistent between the two abundance and multiwavelength follow-up data, is favored over the BKG model.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimal preparation of the ECC ozonesonde

The ECC background current was identified as the removal of residual tri-iodide (iodine) as the cell approaches equilibrium. The altitude dependence of this source of the background current is expected to be only slowly changed in the troposphere with a more rapid decrease in the stratosphere. Oxygen does not play a role in the background current except in the unlikely situation where the electrodes have had all forms of iodine removed from them and the electrodes have not re-equilibrated with the sonde solutions before use. A solution mass transport parameter in the ECC was identified and its altitude dependence determined. The mass transport of tri-iodide dominates in the chemical transduction of ozone to electrical signal. The effect of the mass transport on the ECC background current is predicted. An electrochemical model of the ECC has been developed to predict the response of the ECC to various ozone vertical profiles. The model corresponds very closely to the performance of the ECC in the laboratory. Based on this model, an ECC with no background current is predicted to give total ozone values within 1% of the correct value, although the vertical profile may be in error by as much as + or - 15%.

Thornton, D. C.↗

Quasar X-Ray Spectra At z=1.5

The predicted counts for ASCA observation was much higher than actually observed counts in the quasar. However, there are three weak hard x-ray sources in the GIS field. We are adding them to the source counts in modeling of hard x-ray background. The work is in progress. We have published a paper in Ap.J. on the luminosity function and the quasar evolution. Based on the theory described in this paper we are predicting a number of sources and their contribution to the x-ray background at different redshifts. These model predictions will be compared to the observed data in the final paper.

Siemiginowska, Aneta↗

On the isotropy of the X-ray background radiation.

The spatial fluctuations expected for various models of the X-ray background radiation are examined. The constraints that observations place on the source distribution and radiation mechanisms are then presented. Most models are at present consistent with the lack of observed small scale anisotropy. Future measurements of the beam-to-beam fluctuations could offer a positive test of the inverse Compton explanation for the origin of the X-ray background radiation.

Brecher, K.↗

Design of robust failure detection filters

An essential aspect of the design of control systems for large, flexible spacecraft is fault tolerance. Because it is anticipated that a large number of sensors and actuators will be required to realize good control over these assemblies, the detection and isolation of component failures cannot be based on direct comparisons among replicated components. Instead, the notion of 'analytic redundancy' must be employed for the FDI function. Unfortunately this makes the FDI function sensitive to modeling errors which are certain to exist in the large space structure problem due to model truncation and parameter uncertainty. This paper addresses the robustness to model error of one method of FDI residual generation - the failure detection filter. Initial designs were found to be extremely sensitive to modeling error. The sources of this sensitivity are analyzed and modifications to the design are suggested. The improved filter is shown to have much better visibility of the failure signatures relative to the background due to modeling error.

San Martin, A. M.↗

Apollo-Soyuz survey of the extreme-ultraviolet/soft X-ray background

The paper reports results of the most extensive survey to date of the EUV/soft X-ray background, obtained with an EUV telescope on the Apollo-Soyuz mission. The principal results may be summarized as follows: (1) an intense background flux exists down to energies of 100 eV (4.0 plus or minus 1.3 photons/sq cm/sec/sr/eV average diffuse flux); (2) the Apollo-Soyuz data alone places lower and upper limits on single-temperature models for EUV-emitting interstellar gas for the log T range of 5.1-6.0; and (3) the allowed range would have to be restricted to log T of 5.1-5.6 for the Cash, Malina, and Stern (1976), Burstein et al. (1977), and Apollo-Soyuz data sets to satisfy a single-temperature model for the background at not greater than 280 eV.

Stern, R.↗

Generalising G 2 geometry: involutivity, moment maps and moduli

We analyse the geometry of generic Minkowski N = 1, D = 4 flux compactifications in string theory, the default backgrounds for string model building. In M-theory they are the natural string theoretic extensions of G2 holonomy manifolds. In type II theories, they extend the notion of Calabi-Yau geometry and include the class of flux backgrounds based on generalised complex structures first considered by Graña et al. (GMPT). Using E 7(7) × $\mathbb{R}$ + generalised geometry we show that these compactifications are characterised by an SU(7) ⊂ E 7(7) structure defining an involutive subbundle of the generalised tangent space, and with a vanishing moment map, corresponding to the action of the diffeomorphism and gauge symmetries of the theory. The Kähler potential on the space of structures defines a natural extension of Hitchin’s G 2 functional. Using this framework we are able to count, for the first time, the massless scalar moduli of GMPT solutions in terms of generalised geometry cohomology groups. It also provides an intriguing new perspective on the existence of G 2 manifolds, suggesting possible connections to Geometrical Invariant Theory and stability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗