Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “backbone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Integration of a high oxygen permeability ionomer into polymer electrolyte membrane fuel cell cathodes for high efficiency and power density

In this work, we present a study on the integration of a high oxygen permeability ionomer (HOPI) with high durability carbon supported platinum (Pt/C) catalysts to prepare cathode catalyst layers (CCLs) for polymer electrolyte membrane fuel cells (PEMFCs). A key motivation is the production of PEMFCs with high efficiency and durability for heavy-duty fuel cell vehicles. Our results from integrating a pre-commercial HOPI with robust, state-of-the-art catalysts with medium and low surface area carbon supports show significant increases in specific activities (67% increase over the standard commercial ionomer) at low current densities and reduced oxygen (O 2 ) transport resistances (R O2 ’s) at high current densities, enabling both higher efficiency and peak power density. The reduction in the R O2 with the HOPI is most significant at low relative humidity (RH), due to its more rigid backbone structure resisting compaction at lower water contents. In our ink optimization analysis, we show that the HOPI in this study achieves its peak performance with an ionomer to carbon ratio (I/C) of 0.6 and a moderately alcohol-rich ink solvent when fabricating catalyst layers by the decal method with an automatic wet film coater.

08 HYDROGEN↗
DOE OSTI2023

NMR investigation of proton transport in polybenzimidazole/polyphosphoric acid membranes prepared via novel synthesis route

Here, in this work, we present a molecular-level view of the structural changes in polybenzimidazole (PBI) membranes doped with phosphoric acid (PA) generated by a novel membrane fabrication technique. The modified PA doped membranes displayed unprecedented ionic conductivity at elevated temperatures, comparable to the starting PBI gel membranes prepared by the commonly used PPA process, while also exhibiting enhanced mechanical properties. To elucidate the cause of these effects, we used multi-nuclear ( 1 H, 13 C, 31 P) 1D PFG, MAS and CPMAS, and 2D HETCOR magnetic resonance (NMR) techniques to characterize the structure and dynamics of the modified film and the original gel PBI membranes. 1 H diffusivity measurements show significantly enhanced proton diffusivity, both in magnitude and in lower activation energy, which were consistent with its high ionic conductivity despite the lower PA content compared to the original gel membrane. CPMAS experiments further substantiated that the location of these distinct phosphate environments as being close to the polymer network. Finally, the phosphate groups in the modified membrane were revealed to be strongly bounded to each other and to the PBI polymer backbone in contrast to the combination of weakly and strongly bounded groups of the original gel membrane.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Fine-tuned thermally cross-linkable 6FDA-based polyimide membranes for aggressive natural gas separation

Glassy 6FDA-based polyimides are attractive membrane materials for many industrially important gas separations; however, plasticization in aggressive natural gas often causes significant loss in CO 2 /CH 4 selectivity. In this study, a family of thermally cross-linkable 6FDA-based polyimides containing carboxyl groups were synthesized and cross-linked as dense films via decarboxylation-induced thermal crosslinking. As well as chemical structure, crosslinking temperatures above and below T g are shown to be synergistic tools. Our results demonstrate that structure evolution during the decarboxylation-induced crosslinking process is affected significantly by the 3,5-diaminobenzoic acid (DABA) content in the polymer backbone. Even for a 50/50 CO 2 /CH 4 binary mixture with feed pressure up to 800 psia, decarboxylation-induced crosslinking provides attractive gas separation performance and plasticization resistance. Combined facile structure tunability, crosslinkability and high asymmetric fiber spinnability make the cross-linkable 6FDA-based polyimides a versatile platform for diverse aggressive natural gas feeds encountered in practice. Finally, our study provides insights into material design of thermally cross-linkable polymer membranes for such a broad spectrum of aggressive gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Water and salt transport properties of pentiptycene-containing sulfonated polysulfones for desalination membrane applications

A series of pentiptycene-containing disulfonated polysulfone copolymers (PENT-BP) were synthesized via condensation polymerization. Water and salt transport properties (solubility, diffusivity and permeability) were characterized for acid-form membranes (PENT-BP(H)) and compared with triptycene-based sulfonated polysulfones (TRP-BP(H)) and a non-iptycene-containing 4,4'-biphenol-based series (BPS(H)) of polysulfones to investigate the effect of pentiptycene on membrane performance. At comparable water content, the PENT-BP(H) exhibited increased water and salt permeability due to the additional free volume introduced by the pentiptycene units. Enhanced water/salt permeability selectivity of PENT-BP(H) series was also observed due to a significantly higher diffusivity selectivity. At comparable water permeance (P w D ~ 8 X 10 -6 cm 2 /s), the salt rejection of PENT-BP (H) copolymers obtained from dead-end filtration reached 91–93% at 400 psi, higher than that of a corresponding BPS(H) series. This study suggests that incorporation of iptycene moieties into polymer backbone is an effective strategy to enhance desalination membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

PBI nanofiber mat-reinforced anion exchange membranes with covalently linked interfaces for use in water electrolysers

Anion exchange membranes (AEM) are key components in anion exchange membrane water electrolysers. Recently developed materials are less susceptible to the alkaline degradation of the polymer backbone and quaternary ammonium groups. A remaining challenge is the mechanical stability in contact with hot water and dimensional stability when the temperature of the feed solution changes. One solution is to reinforce membranes with a porous support. Since support materials like PEEK or PTFE have a different swelling behavior than the matrix and no strong interactions with the matrix, voids can form, and gas crossover increases. In this work, we approach this issue by pore filling polybenzimidazole nanofiber mats with the bromomethylated precursor of mTPN, an ultra-stable AEM material. During drying, a covalent interaction between support (PBI amine groups) and matrix (-CH 2 Br) is established. After quaternization, the optimized PBI/mTPN-50.120 composite membrane still shows a high conductivity of 62 mS cm –1 , but 37% reduced length swelling in comparison to the non-reinforced membrane. Tensile strength and Young's modulus increase 17% and 56% to 49 MPa and 680 MPa, respectively. In an electrolyser, a stable voltage of 1.98V at 0.25 A cm –2 was achieved, and no change in membrane resistance was observed over the test time of 200 h (50°C, 1 M KOH, catalysts based on Ni/Fe and Mo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Single and Dual-Solute Transport in Quaternary Ammonium-Functionalized Anion Exchange Membranes: Isolating the Impact of Water Volume Fraction

Membranes are essential components of photoelectrochemical CO 2 reduction cells (PEC-CRC), as they regulate solute transport and impact device efficiency. These cells are a promising approach for converting carbon dioxide into valuable chemicals. However, electrochemical reactions involve not just a single electrolyte; membrane transport typically includes multiple electrolytes. When a mixture of solutes is present, the presence of one solute in the membrane can impact the diffusion and sorption of other solutes. In complex systems where multiple solutes are diffusing simultaneously through a hydrated, dense polymer membrane, the resulting transport behavior is poorly understood. This study highlights the individual and two solute transport behavior of potassium formate, acetate, and bicarbonate ions in neutral membranes and quaternary ammonium-functionalized anion exchange membranes (AEMs) based on phenyl acrylate polymer backbones. By isolating the effect of water content, we emphasize how fixed charge density and solute-membrane interactions influence transport behavior. In neutral membranes, the diffusivity follows the order of potassium formate > potassium acetate > potassium bicarbonate. However, in AEMs, the order shifts due to changes in ion-membrane interactions, with potassium bicarbonate diffusivity surpassing that of potassium acetate. These results underscore the importance of ion exchange membranes and ion-membrane interaction in modulating transport properties, providing valuable insights for optimizing membranes in electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Charge-density based convolutional neural networks for stacking fault energy prediction in concentrated alloys

A descriptor-less machine learning (ML) model based only on charge density images extracted from density functional theory (DFT) is developed to predict stacking fault energies (SFE) in concentrated alloys. The model is based on convolutional neural networks (CNNs) as one of the promising ML techniques for dealing with complex images and data. Identification of correct descriptors is a key bottleneck to develop ML models for predicting materials properties. Often, in most ML models, textbook physical descriptors such as atomic radius, valence charge and electronegativity are used as descriptors which have limitations because these properties change in concentrated alloys when multiple elements are mixed to form a solid solution. Here, we illustrate that, within the scope of DFT, the search for descriptors can be circumvented by electronic charge density, which is the backbone of the Kohn-Sham DFT and describes the system completely. The performance of our model is demonstrated by predicting SFE of concentrated alloys with an RMSE and R 2 of 6.18 mJ/m 2 and 0.87, respectively, validating the accuracy of the proposed approach.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced hindrance from phenyl outer side chains on nonfullerene acceptor enables unprecedented simultaneous enhancement in organic solar cell performances with 16.7% efficiency

Inner side-chain engineering on Y6 has been a proven successful in improving short-circuit current density (JSC) through fine-tuning aggregated structures of acceptors. However, it fails in tuning the lowest unoccupied molecular orbital level (LUMO) and open-circuit voltage (V OC ). In this paper, we turn to focus on engineering the outer side chains on the flanking thienothiophene units with 4-hexylphenyl (PhC6) and 6-phenylhexyl (C6Ph) chains. Use of PhC6 enhances the steric effect between the attached phenyl and the ending group, which in combination with the additional conjugation effect provided by the linking phenyl leads to upshifted energy levels and increased V OC as a result. Again, substitution with the bulkier PhC6 unprecedentedly improves film-morphology with reduced paracrystalline disorder and long period and increased root-mean-square composition variations as well, leading to increased electron and hole mobilities and suppressed monomolecular recombination with J SC and fill-factor (FF) simultaneously enhanced. The PM6:BTP-PhC6-based devices yield a higher efficiency value of 16.7% than the PM6:BTP-C6Ph-based one (15.5%). Furthermore, this study shows a conceptual advance in materials design towards reducing the conflict between V OC and J SC in binary blended organic solar cells, which can be achieved by introducing bulkier chains to twist the backbone and simultaneously enhance the packing order.

14 SOLAR ENERGY↗
DOE OSTI2020

Superlattice-Structured Films by Magnetron Sputtering as New Era Electrodes for Advanced Lithium-ion Batteries

Sustaining sound structures in Si-based anodes is extremely challenging because of the high volumetric expansion that occurs upon cycling. To maintain high capacities over cycles, new designs rely on engineering-specific hierarchical geometries and/or optimized composite compositions such that at least one of the multiple elements serves as buffer and/or electron conductive pathways in the electrodes. In this paper, we report an innovative design in which alternating layers of periodic atomic structures involving multiple elements form a new anode material for lithium-ion batteries. In this work, a superlattice-structured amorphous film made using Si, Mo, and Cu is fabricated by a simple and scalable magnetron sputtering process for the first time. This continuous and repetitive superlattice formation along the film thickness provides a homogeneous stress-strain distribution. The Mo-Cu layer in the superlattice acts as an inactive-conductive layer and as a backbone to handle the volume expansion of active Si upon cycling. This nano-functional superlattice approach enables harnessing the high energy density of Si while maintaining its structural stability. As a result, the electrode exhibits high specific capacity and capacity retention even at high cycling rates. The possible use of the film in a full cell is also evaluated by cycling it vs. the LiMn 1.5 Ni 0.5 O 4 cathode. The full cell maintains a stable capacity of about 900 mAh g anode -1 over 150 cycles, at ~600 mA g -1 rate. The remarkable performance of this nano-functional superlattice film is found to be promising as anodes for applications that require high energy, long calendar life, and excellent abuse tolerance such as electric vehicle batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

A Field-Enhanced Conduction-Cooled Superconducting Cavity for High-Repetition-Rate Ultrafast Electron Bunch Generation

High-repetition-rate sources of bright electron bunches have a wide range of applications. They can directly be employed as probes in electron-scattering setups, or serve as a backbone for the generation of radiation over a broad range of the electromagnetic spectrum. This paper describes the development of a compact sub-Mega-electronvolt (sub-MeV) electron-source setup capable of operating at MHz repetition rates and forming sub-picosecond electron bunches with transverse emittance below 20 nm. The setup relies on a conduction-cooled superconducting single-cell resonator with its geometry altered to enhance the field at the surface of the emitter. The system is designed to accommodate cooling using a 2 W pulse-tube cryogen-free cryocooler operated at 4.2 K. Although we focus on the case of a photoemitted electron bunch, the scheme could be adapted to other emission mechanisms.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Outstanding questions on xylan biosynthesis

Xylan is the second most abundant polysaccharide in plant biomass. It is a crucial component of cell wall structure as well as a significant factor contributing to biomass recalcitrance. Xylan consists of a linear chain of β-1,4-linked xylosyl residues that are often substituted with glycosyl side chains, such as glucuronosyl/methylglucuronosyl and arabinofuranosyl residues, and acetylated at O-2 and/or O-3. Xylan from gymnosperms and dicots contains a unique reducing end tetrasaccharide sequence that is not detected in xylan from grasses, bryophytes and seedless vascular plants. Grass xylan is heavily decorated at O-3 with arabinofuranosyl residues that are frequently esterified with hydroxycinnamates. Further, genetic and biochemical studies have uncovered a number of genes involved in xylan backbone elongation and acetylation, xylan glycosyl substitutions and their modifications, and the synthesis of the unique xylan reducing end tetrasaccharide sequence, but some outstanding issues on the biosynthesis of xylan still remain unanswered. Here, we provide a brief overview of xylan structure and focus on discussion of the current understanding and open questions on xylan biosynthesis. Further elucidation of the biochemical mechanisms underlying xylan biosynthesis will not only shed new insights into cell wall biology but also provide molecular tools for genetic modification of biomass composition tailored for diverse end uses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Experimental and computational study of polystyrene sulfonate breakdown by a Fenton reaction

Experimental studies and ab initio quantum chemistry calculations were combined to investigate the process by which a Fenton reaction breaks down polystyrene sulfonate. The experimental results show that both molecular weight reduction and loss of aromaticity occur nearly simultaneously, a finding that is supported by the calculations. The results show that more than half of the material is broken down to low molecular weight compounds (< 500 g/mol) with two molar equivalents of H 2 O 2 per styrene monomer. The calculations provide insights into the reaction pathways and indicate that at least two hydroxyl radicals are required to cleave backbone Csingle bondC bonds or to eliminate aromaticity. The calculations also show that, of the aromatic carbons, hydroxyl radical is most likely to add to the carbon bonded to sulfur. This finding explains the loss of hydrogen sulfite anion early in the process and also the efficient reduction of Fe(III) to Fe(II) through semiquinone formation. Taken together the experimental and computational results indicate that the reaction is very efficient and that very little H 2 O 2 is lost to unproductive reactions. In conclusion, this high efficiency is attributed to the close association of Fe atoms with the sulfonate group such that hydroxyl radicals are generated near the polymer chains.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chain flexibility and glass transition temperatures of poly(n-alkyl (meth)acrylate)s: Implications of tacticity and chain dynamics

The relationship between chain microstructure and glass transition temperature (T g ) is complicated for poly(alkyl methacrylate)s and poly(alkyl acrylate)s. Despite intensive studies, relationships between the structures of these polymers and their properties, including solution characteristics and T g , are still controversial. Solution properties, chain conformations, including Flory's characteristic ratio (C ∞ ), persistence length (l p ), and chain diameters, and T g are reported for series of poly(n-alkyl acrylate)s and poly(n-alkyl methacrylate)s having alkyl side chain lengths (n) ranging from 1 to 10 carbons in length, with uniform and well-characterized tacticities. Chain flexibilities of both series of polymers decrease as n increases, reflecting increased hindrances to rotation about backbone bonds as side chains become longer. Conversely, the T g s for both series of polymers decrease substantially as n increases, reflecting the greater side chain mobilities of long alkyl substituents. For shorter alkyl chain lengths, T g s for the poly(n-alkyl acrylate)s are much lower than for the corresponding poly(n-alkyl methacrylate)s, a difference which has been attributed in the past to the presumed reduced chain flexibility of polymethacrylates due to the presence of the α-methyl substituent. However, contrary to such expectations, C ∞ and l p values for these two series of polymers are nearly identical at a given n value, except for the longest n-alkyl substituents. Instead, the differences in T g may be attributed to the differences in tacticity of the two series – almost ideally atactic for the poly(n-alkyl acrylate)s but high in syndiotacticity for the poly(n-alkyl methacrylate)s. The T g s for the two series of polymers approach that of polyethylene at longer alkyl chain lengths. In addition, the effects of tacticity and chain dynamics on C ∞ , l p , and T g of poly(methyl methacrylate) is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis of imidazolium-mediated Poly(benzoxazole) Ionene and composites with ionic liquids as advanced gas separation membranes

We report thermally rearranged (TR) polymers and ionic polymers are two material classes which have been employed in leading gas separation membranes. This work introduces a novel approach of combining the benzoxazole functionality associated with TR polymers with tailorable cationic groups, yielding a new type of imidazolium-mediated poly(benzoxazole) ionene polymer, “Im-PBO-Ionene” with the aim of enhanced CO 2 separation performance. The structural changes exhibited from the Coulombic interactions between the ionene backbone and the “free” ionic liquid (IL) resulted in enhanced gas separation performance, shown in fundamental characterizations, observed through increased diffusivities and more notably, retained high selectivities and 3x or 5x respective increases in CO 2 permeability upon the addition of 1 or 2 equivalents of IL per polymer repeat unit. These new high-performance ionenes demonstrate the versatility of ionene design and potential of the ionene + IL material platform for gas separation membranes with versatile incorporation of sophisticated functional and structural features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Local conformations and heterogeneities in structures and dynamics of isotactic polypropylene adsorbed onto carbon fiber

Carbon fiber (CF) reinforced polymers (CFRPs) have experienced widespread use in various industries. One of the most important parameters that controls the macroscopic property of CFRPs is the interface between a polymer matrix and CF. There is growing evidence to suggest the formation of a bound polymer layer (BPL), i.e., polymer chains that physically adsorb on a filler surface. However, this interface is always in contact with the thicker part of a polymer matrix, rendering its understanding a difficult task. Therein, we use CF-reinforced isotactic polypropylene (iPP) as a rational CFRP. To characterize the BPL on the CF surface, we extracted it from the CFRP using solvent-rinsing with p-xylene. The physical and thermal properties of the BPL were characterized by differential scanning calorimetry and thermogravimetric analysis, while its microscopic structures and dynamics were probed by small-angle neutron scattering and quasi-elastic neutron scattering (QENS) techniques. Subsequently, we employed atomistic molecular dynamics (MD) simulations to complement the QENS results above the bulk melting temperature and reveal details that were experimentally inaccessible. In this work, we observed that the degree of crystallinity of the BPL was quite lower than the bulk, while the melting temperature of the BPL remained the same as the bulks. Within the given length and time scales probed by QENS and MD, we also observed that most of the bound chains were mobile, with the formation of a high-density region (less than 1 nm in thickness) near the CF surface. The segmental dynamics of the bound chains probed by both QENS and MD were also much faster than those of the free chains, possibly due to the presence of a free surface region at the topmost surface of the BPL. Furthermore, the MD results demonstrated that the backbone chains and side groups lie nearly flat on the CF surface, which is the driving force for the flattening process of the iPP BPL to overcome the conformational entropy loss in the total free energy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tuning gas separation performance of polyimide membranes with macrocyclic crown ether units

Membrane-based gas separation is an energy-efficient alternative to conventional thermally-driven separation processes. However, polymer membranes face the permeability-selectivity trade-off challenge, which stems from the broad size distribution of free volume voids. Here, this study reports a molecular design strategy to address this challenge through incorporating macrocyclic crown ether (CE) moieties into the backbone of Matrimid® polyimide, a commercial gas separation membrane. A series of CE-containing Matrimid®-like copolyimides were synthesized with systematically varied CE molar contents ranging from 3 to 20%. These copolyimides formed ductile, defect-free thin films suitable for membrane fabrication. Gas permeation tests revealed a non-monotonic relationship between permeability/selectivity and CE content. Notably, the copolyimide with only 5% CE demonstrated a 61% increase in CO 2 /CH 4 selectivity and a 13% increase in CO 2 permeability relative to pristine Matrimid®. Higher CE contents did not yield further performance improvements, which is likely due to the competing effects of chain packing disruption and π–π interactions among CE moieties at high content. This hypothesis was supported by wide-angle X-ray scattering (WAXS) analysis, density measurements, and fractional free volume calculations. These findings highlight the potential of macrocyclic crown ether incorporation strategies in fine tuning the microstructure of commercial polyimide gas separation membranes to surpass the traditional permeability-selectivity trade-off.

CO2 separation↗
DOE OSTI2020

On the nature of macroradicals formed upon radiolysis of aqueous poly(N-vinylpyrrolidone) solutions

Herein we have explored the nature of macroradicals formed upon radiolysis of aqueous poly(N-vinylpyrrolidone) (PVP) solutions using pulse radiolysis, density functional theory (DFT) and literature data. On the basis of literature data on site-specific kinetics of hydrogen abstraction from simple amides and spectra corresponding to specific radical sites on the same amides we have assessed the distribution of H-atom abstraction by • OH radicals from different positions on the pyrrolidone ring and the polymer backbone. Pulse radiolysis experiments performed at different doses per pulse and different PVP concentrations demonstrate that the H-abstracting radiolysis products are not quantitatively scavenged by the polymer when the dose per pulse exceeds ≈40 Gy. The implications of this are discussed in the context of radical-initiated crosslinking reactions. At a mass fraction of 0.1% PVP and doses per pulse ranging from 7 Gy to 117 Gy, the overall radical decay observed at 390 nm follows second order kinetics with rate constants on the order of 10 9 dm 3 mol -1 s -1 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗