Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “apparent size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Ion irradiation effects on metallic nanocrystals

We have investigated structural and morphological properties of metallic nanocrystals (NCs) exposed to ion irradiation. NCs were characterized by transmission electron microscopy in combination with advanced synchrotron-based analytical techniques, in particular X-ray absorption spectroscopy and small-angle X-ray scattering. A number of different effects were observed depending on the irradiation conditions. At energies where nuclear stopping is predominant, structural disorder/amorphization followed by inverse Ostwald ripening/dissolution due to ion beam mixing was observed for Au and Cu NCs embedded in SiO{sub 2}. The ion-irradiation-induced crystalline to amorphous transition in the NCs, which cannot be achieved in the corresponding bulk metals, was attributed to their initially higher structural energy as compared to bulk material and possibly preferential nucleation of the amorphous phase at the NC/SiO{sub 2} interface. At very high irradiation energies (swift heavy ion irradiation), where the energy loss is nearly entirely due to electronic stopping, a size-dependent shape transformation of the NCs from spheres to rod like shapes was apparent in Au NCs. Our preliminary results are in good agreement with considerations on melting of the NCs in the ion track as one mechanism involved in the shape transformation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a current sheet in the wake of a fast coronal mass ejection

A bright ray that developed in the wake of a fast coronal mass ejection (CME) on 2005 September 7 presents a unique opportunity to study the early development and physical characteristics of a reconnecting current sheet (CS). Polarization brightness images from the Mk4 K-Coronameter at the Mauna Loa Solar Observatory are used to determine the structure of the ray along its axis low in the corona as it progressed outward. Coverage of the early development of the ray out to ∼1.3 R {sub ☉} for a period of ∼27 hr after the start of the event enables for the first time in white light a measurement of a CME CS from the top of the arcade to the base of the flux rope. Measured widths of the ray are combined to obtain the kinematics of the upper and lower {sup Y-}points described in reconnection flux-rope models such as that of Lin and Forbes. The time dependence of these points are used to derive values for the speed and acceleration of the growth of the CS. We note the appearance of a large structure which increases in size as it expands outward in the early development of the ray and an apparent oscillation with a period of ∼0.5 hr in the position angle of the ray.

79 ASTRONOMY AND ASTROPHYSICS↗

HIGH-RESOLUTION IMAGING OF WATER MASER EMISSION IN THE ACTIVE GALAXIES NGC 6240 AND M51

We present the results of observations of 22 GHz H{sub 2}O maser emission in NGC 6240 and M51 made with the Karl G. Jansky Very Large Array. Two major H{sub 2}O maser features and several minor features are detected toward the southern nucleus of NGC 6240. These features are redshifted by about 300 km s{sup −1} from the galaxy’s systemic velocity and remain unresolved at the synthesized beam size. A combination of our two-epoch observations and published data reveals an apparent correlation between the strength of the maser and the 22 GHz radio continuum emission, implying that the maser excitation relates to the activity of an active galactic nucleus in the southern nucleus rather than star-forming activity. The star-forming galaxy M51 hosts H{sub 2}O maser emission in the center of the galaxy; however, the origin of the maser has been an open question. We report the first detection of 22 GHz nuclear radio continuum emission in M51. The continuum emission is co-located with the maser position, which indicates that the maser arises from nuclear active galactic nucleus-activity and not from star-forming activity in the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the implications of the data from recent high-energy-density Kelvin-Helmholtz shear layer experiments

The first successful high energy density Kelvin-Helmholtz (KH) shear layer experiments (O.A. Hurricane, et al., Phys. Plasmas, 16, 056305, 2009; E.C. Harding, et al., Phys. Rev. Lett., 103, 045005, 2009) demonstrated the ability to design and field a target that produces an array of large diagnosable KH vortices in a controlled fashion. Data from these experiments vividly showed the complete evolution of large distinct eddies, from formation to apparent turbulent break-up. Unexpectedly, low-density bubbles/cavities comparable to the vortex size ({approx} 300 - 400 {micro}m) appeared to grow up in the free-stream flow above the unstable material interface. In this paper, the basic principles of the experiment will be discussed, the data reviewed, and the progress on understanding the origin of the above bubble structures through theory and simulation will be reported on.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmic time slip: Testing gravity on supergalactic scales with strong-lensing time delays

We devise a test of nonlinear departures from general relativity (GR) using time delays in strong gravitational lenses. We use a phenomenological model of gravitational screening as a step discontinuity in the measure of curvature per unit mass at a radius Λ. The resulting slip between two scalar gravitational potentials leads to shifts in the apparent positions and time delays of lensed sources, relative to the GR predictions, of size γ PN – 1. As a proof of principle, we use measurements of two lenses, RXJ1121 – 1231 and B1608 + 656, to constrain deviations from GR to be below |γ PN – 1| ≤ 0.2 × (Λ/100 kpc). Furthermore, these constraints are complementary to other current probes and are the tightest in the range Λ = 10–200 kpc, showing that future measurements of strong-lensing time delays have great promise to seek departures from general relativity on kpc-Mpc scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Biopower: Impact of Biofuels Deployment to Replace Petroleum Liquids in Stationary Power Applications

Petroleum-based liquids are used in a portion of power generation applications in the United States, predominantly in the New England, Middle Atlantic, South Atlantic, and Pacific-Noncontiguous regions. Power plants that burn petroleum liquids, such as distillate or residual fuel oils, are generally used for short periods to accommodate peak electricity demands. The Energy Information Administration (EIA) estimated the U.S. consumption of petroleum liquids for electricity generation at 27 million barrels in 2018, representing a cost of $2.4 billion annually. This study assesses the potential to displace all or part of the petroleum liquids in U.S. power generation with biofuels. The biofuels for this application are assumed to be derived from terrestrial feedstocks, with conversion routes of both fast pyrolysis (bio-oil) and hydrothermal liquefaction (bio-crude). Regional models were used to assess the availability and cost of three different base materials: clean wood, forest residues, and corn stover; each was evaluated in the laboratory at small or experimental scales for conversion to bio-oil or bio-crude. The estimated biofuel production quantities depend on equivalent heating versus the current heavy fuel. In this report, the availability of each type of biomass for each section of the U.S. Census division is estimated using a conservative broker price (in each case) of $ 80 per dry tonne. The results show that the petroleum-liquid power generation in each of the Census Divisions could be supplied by one or more of the feedstocks evaluated. For all regions, clean wood supplies (only) could provide ample supply. For all but two regions (Middle Atlantic and New England), forest residues alone are sufficient. Finally, for all regions but three (Middle Atlantic, New England, and South Atlantic), corn stover alone is adequate. The Minimum Fuel Selling Price (MFSP) of bio-oil and bio-crude were also estimated for each feedstock type and Census Division. This analysis showed that fast pyrolysis bio-oil projections to be lower (14% on average) than current wholesale petroleum-based heating oil prices in each of the regions, assuming 100 dry tonnes/day processing capacity. However, bio-crude predictions were significantly higher (2X) in all cases. The effect of biorefinery size was also quantified. Based on the preliminary results in this study, it is apparent the biofuels could be an economical alternative for current petroleum liquids in U.S. power generation. However, additional research is needed to determine the necessary biofuel characteristics to support existing generation equipment. It is recommended that both power generation and biofuel production stakeholders to be engaged to outline the research and testing needed to identify the technical hurdles to enable the opportunity.

02 PETROLEUM↗

A Comet Active Beyond the Crystallization Zone

We present observations showing inbound long-period comet C/2017 K2 (PANSTARRS) to be active at a record heliocentric distance. Nucleus temperatures are too low (60–70 K) either for water ice to sublimate or for amorphous ice to crystallize, requiring another source for the observed activity. Using the Hubble Space Telescope we find a sharply bounded, circularly symmetric dust coma 10{sup 5} km in radius, with a total scattering cross-section of ∼10{sup 5} km{sup 2}. The coma has a logarithmic surface brightness gradient −1 over much of its surface, indicating sustained, steady-state dust production. A lack of clear evidence for the action of solar radiation pressure suggests that the dust particles are large, with a mean size ≳0.1 mm. Using a coma convolution model, we find a limit to the apparent magnitude of the nucleus V>25.2 (absolute magnitude H>12.9). With assumed geometric albedo p {sub V} = 0.04, the limit to the nucleus circular equivalent radius is <9 km. Prediscovery observations from 2013 show that the comet was also active at 23.7 au heliocentric distance. While neither water ice sublimation nor exothermic crystallization can account for the observed distant activity, the measured properties are consistent with activity driven by sublimating supervolatile ices such as CO{sub 2}, CO, O{sub 2}, and N{sub 2}. Survival of supervolatiles at the nucleus surface is likely a result of the comet’s recent arrival from the frigid Oort Cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

Ferrofluid separator for nonferrous scrap separation

Behavior of nonmagnetic objects within separator is essentially function of density, and independent of size or shape of objects. Results show close agreement between density of object and apparent density of ferrofluid required to float it. Results also demonstrate that very high separation rates are achievable by ferrofluid sink-float separation.

Kaiser, R.↗

Spectroscopy of the fuzz associated with four quasars

The spectral features detected in the fuzz of four probable quasars spanning the z range of 0.036-0.37 are reported; the objects studied are 0351 + 026 (z = 0.036), 1059 + 730 (z = 0.089), 0845 + 378 (z = 0.307), and 3C 48 (z = 0.368). The results indicate that apparently some (and probably all) low-redshift quasars are embedded in fuzz whose size, morphology, absolute magnitude, and spectroscopic character are those of a galaxy. Thus, it appears virtually certain that quasars are the active nuclei of galaxies.

Balick, B.↗

An experimental investigation of the separating/reattaching flow over a backstep

Reynolds number effects on the evolution of the turbulence structure in the recovery region of a turbulent separated flow generated by a backward-facing step were studied experimentally. Five different flow conditions and four Reynolds numbers were investigated. All single point measurements were conducted on the plane of symmetry of the wind tunnel starting at approximately x/h = 10 for each flow condition. The upper limit of the measuring domain depends upon the physical size of the tunnel and ranged from 50 to 114 step heights. It is apparent that most of the boundary layer recovery was captured by the experiment. Normal stresses, shear stress, mixing length scales and eddy viscosity are shown, while the higher order velocity products related to the diffusion of the turbulence energy are planned for latter stages of the data analysis.

Jovic, Srboljub↗

The Apollo 17 samples: The Massifs and landslide

More than 50 kg of rock and regolith samples, a little less than half the total Apollo 17 sample mass, was collected from the highland stations at Taurus-Littrow. Twice as much material was collected from the North Massif as from the South Massif and its landslide (the apparent disproportionate collecting at the mare sites is mainly a reflection of the large size of a few individual basalt samples). Descriptions of the collection, documentation, and nature of the samples are given. A comprehensive catalog is currently being produced. Many of the samples have been intensely studied over the last 20 years and some of the rocks have become very familiar and depicted in popular works, particularly the dunite clast (72415), the troctolite sample (76535), and the station 6 boulder samples. Most of the boulder samples have been studied in Consortium mode, and many of the rake samples have received a basic petrological/geochemical characterization.

Ryder, Graham↗

High-temperature Strain Sensor and Mounting Development

This report describes Government Work Package Task 29 (GWP29), whose purpose was to develop advanced strain gage technology in support of the National Aerospace Plane (NASP) Program. The focus was on advanced resistance strain gages with a temperature range from room temperature to 2000 F (1095 C) and on methods for reliably attaching these gages to the various materials anticipated for use in the NASP program. Because the NASP program required first-cycle data, the installed gages were not prestabilized or heat treated on the test coupons before first-cycle data were recorded. NASA Lewis Research Center, the lead center for GWP29, continued its development of the palladium-chromium gage; NASA Langley Research Center investigated a new concept gage using Kanthal A1; and the NASA Dryden Flight Research Center chose the well-known BCL-3 iron-chromium-aluminum gage. Each center then tested all three gages. The parameters investigated were apparent strain, drift strain, and gage factor as a function of temperature, plus gage size and survival rate over the test period. Although a significant effort was made to minimize the differences in test equipment between the three test sites (e.g., the same hardware and software were used for final data processing), the center employed different data acquisition systems and furnace configurations so that some inherent differences may be evident in the final results.

Williams, W. Dan↗

Impact Craters of Venus with D Greater Than 5 km Classified Based on Degree of Preservation of the Associated Radar-Dark Deposits

This is a further continuation of work, which studied craters greater than or equal to 30 km in diameter. That work subdivided craters based on character of the associated radar dark deposits. It was suggested and then confirmed that the most pristine deposits of that sort are radar-dark parabolas. Non-parabolic radar-dark halos represent the next stage of the deposit evolution and then with time they disappear. So presence and character of crater-associated dark deposit can be used for estimates of the crater age and then for dating other features. Previous work classified craters into: 1) craters with dark parabola (DP), 2) with clear dark halo (CH), 3) with faint halo (FH) and 4) with no dark halo (NH). It was found that abundances of craters superposed on regional plains (whose mean age is close to the planet mean surface age T) and belonging to DP, CH, FH and NH classes were correspondingly 15, 30, 30 and 25%. From that it was concluded that DP craters are not older than 0.1-0.15T; CH craters formed during the time interval from approx. 0.5T until 0.1-0.15T ago, and the FH and NH craters formed prior to approx. 0.5T ago. It was shown that the DP, CH, FH and NH percentages show only slight apparent dependence on the crater geographic latitudes and no noticeable dependence on the crater size. The present study analyzes a much larger population (all D greater than or equal to 5 km craters) to investigate better the latitude effect and to study if within this larger crater population the size effect exists.

Basilevsky, A. T.↗

Performance Evaluation of the Operational Air Quality Monitor for Water Testing Aboard the International Space Station

In the history of manned spaceflight, environmental monitoring has relied heavily on archival sampling. For short missions, this type of sample collection was sufficient; returned samples provided a snapshot of the presence of chemical and biological contaminants in the spacecraft air and water. However, with the construction of the International Space Station (ISS) and the subsequent extension of mission durations, soon to be up to one year, the need for enhanced, real-time environmental monitoring became more pressing. The past several years have seen the implementation of several real-time monitors aboard the ISS, complemented with reduced archival sampling. The station air is currently monitored for volatile organic compounds (VOCs) using gas chromatography-differential mobility spectrometry (Air Quality Monitor [AQM]). The water on ISS is analyzed to measure total organic carbon and biocide concentrations using the Total Organic Carbon Analyzer (TOCA) and the Colorimetric Water Quality Monitoring Kit (CWQMK), respectively. The current air and water monitors provide important data, but the number and size of the different instruments makes them impractical for future exploration missions. It is apparent that there is still a need for improvements in environmental monitoring capabilities. One such improvement could be realized by modifying a single instrument to analyze both air and water. As the AQM currently provides quantitative, compound-specific information for target compounds present in air samples, and many of the compounds are also targets for water quality monitoring, this instrument provides a logical starting point to evaluate the feasibility of this approach. In this presentation, we will discuss our recent studies aimed at determining an appropriate method for introducing VOCs from water samples into the gas phase and our current work, in which an electro-thermal vaporization unit has been interfaced with the AQM to analyze target analytes at the relevant concentrations at which they are routinely detected in archival water samples from the ISS.

Wallace, William T.↗

RF H- Ion Source with Saddle Antenna

In this project we are developing an RF H- surface plasma source (SPS) which will synthesize the most important developments in the field of negative ion sources to provide high pulsed and average current, higher brightness, longer lifetime and higher reliability by improving a power efficiency. Several versions of new plasma generators with different antennas and magnetic field configurations were tested in a small AlN test chamber in the SNS ion source Test Stand. Then a prototype saddle antenna was installed in the Test Stand with a larger, normal-sized SNS AlN chamber that achieved a peak current of 67 mA and an apparent efficiency of 1.6 mA/kW. These values are comparable to those of the present SNS sources and can be expected to be improved when the prototype is developed into an operational version in the next phase of the project.

43 PARTICLE ACCELERATORS↗

Electroplated Polymer‐Modified Carbon Fiber for Performance‐Enhancing Composite Interfaces

Carbon fiber composite performance relies on the fiber-matrix interface for effective load transfer. To enhance interfacial properties between the fiber and matrix, often carbon fiber surfaces are oxidatively and covalently modified to incorporate chemical functional groups. By contrast, here, noncovalent electrodeposition of functional polyelectrolyte is applied onto conducting carbon fibers from aqueous solutions. A natural polymer, chitosan (CS), is electro-deposited onto the fiber surface, which undergoes multi-scale physical interactions. The bound CS layer with abundant amine functionalities reacts with epoxy moieties within the matrix to improve the interfacial properties. The scalable and energy-efficient electrodeposition eliminates traditional functionalization and sizing requirements of carbon fiber while delivering significantly higher mechanical performance with enhanced consistency. For continuous fiber reinforced composites, compared to conventional fibers, apparent interlaminar shear strength increases by 27%, reaching ≈86 MPa. The short fiber composites with only 2–11 wt.% fibers exhibit ≈20% increase in tensile strength with a peak performance of 120 MPa. Unlike traditionally treated and sized carbon fiber, this approach delivers coated fibers with long shelf-life and allows recovery of both CS in electrolyte form and carbon fiber by continuous electrochemical processing of the modified fibers with inverse polarity; thus, it promotes overall fiber recyclability.

36 MATERIALS SCIENCE↗

Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment

Highlights: • Gradient microstructures made by SMAT are investigated for an austenitic 304 L steel. • Cryogenic shot peening reduces the surface roughness. • Cryogenic condition increases subsurface hardening by formation of additional martensite. • The maximum martensite fraction is always located at the subsurface. • Combination of parameters allow to tailor broad ranges of hardness and roughness. - Abstract: The beneficial effect of using cryogenic temperatures for the ultrasonic surface mechanical attrition treatment (SMAT) is depicted in the case of the 304 L austenitic stainless steel. The cryogenic temperatures induce an additional driving force for the formation of martensite at depth where the effect of shot peening tends to vanish, raising the subsurface hardness by 20 to 30%. The maximum amount of α′ martensite was always located within the subsurface. This is explained by different mechanisms operating at different stages during the SMAT process: (i) higher shear stresses at the subsurface due to the Hertzian contact stress, (ii) local heating due to the shot impacts and (iii) surface martensite destabilization when the microstructure enters the nanometric range. Consequently, the gradient structure formed by the SMAT superimposes different natures of gradients in terms of grain size and martensitic fraction. The steel being harder to deform at cryogenic temperatures, a significant decrease of the apparent surface roughness (down to 44%) is also obtained. An appropriate selection of processing parameters allows to tailor the surface towards a broad range of hardness and roughness values: 425 to 560 HV and 1.6 to 3.3 μm, respectively.

36 MATERIALS SCIENCE↗

Phase stability in thermally-aged CASS CF8 under heavy ion irradiation

The stability of the microstructure of a cast austenitic stainless steel (CASS), before and after heavy ion irradiation, was investigated by atom probe tomography (APT). A CF8 ferrite–austenite duplex alloy was thermally aged at 400 °C for 10,000 h. After this treatment, APT revealed nanometer-sized G-phase precipitates and Fe-rich α and Cr-enriched α' phase separated regions in the ferrite. The thermally-aged CF8 specimen was irradiated with 1 MeV Kr ions to a fluence of 1.88 × 10 19 ions/m 2 at 400 °C. After irradiation, APT analysis revealed a strong spatial/dose dependence of the G-phase precipitates and the α–α' spinodal decomposition in the ferrite. For the G-phase precipitates, the number density increased and the mean size decreased with increasing dose, and the particle size distribution changed considerably under irradiation. The inverse coarsening process can be described by recoil resolution. The amplitude of the α–α' spinodal decomposition in the ferrite was apparently reduced after heavy ion irradiation.

Li, Meimei↗