Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Eliminating chemo-mechanical degradation of lithium solid-state battery cathodes during >4.5 V cycling using amorphous Nb2O5 coatings

Abstract Lithium solid-state batteries offer improved safety and energy density. However, the limited stability of solid electrolytes (SEs), as well as irreversible structural and chemical changes in the cathode active material, can result in inferior electrochemical performance, particularly during high-voltage cycling (>4.3 V vs Li/Li + ). Therefore, new materials and strategies are needed to stabilize the cathode/SE interface and preserve the cathode material structure during high-voltage cycling. Here, we introduce a thin (~5 nm) conformal coating of amorphous Nb 2 O 5 on single-crystal LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode particles using rotary-bed atomic layer deposition (ALD). Full cells with Li 4 Ti 5 O 12 anodes and Nb 2 O 5 -coated cathodes demonstrate a higher initial Coulombic efficiency of 91.6% ± 0.5% compared to 82.2% ± 0.3% for the uncoated samples, along with improved rate capability (10x higher accessible capacity at 2C rate) and remarkable capacity retention during extended cycling (99.4% after 500 cycles at 4.7 V vs Li/Li + ). These improvements are associated with reduced cell polarization and interfacial impedance for the coated samples. Post-cycling electron microscopy analysis reveals that the Nb 2 O 5 coating remains intact and prevents the formation of spinel and rock-salt phases, which eliminates intra-particle cracking of the single-crystal cathode material. These findings demonstrate a potential pathway towards stable and high-performance solid-state batteries during high-voltage operation.

Science & Technology - Other Topics↗
DOE OSTI2025

Chemo-Mechanical Behavior and Stability of High-Loading Cathodes in Solid-State Batteries

Solid-state batteries can offer higher energy density and improved safety compared to lithium ion batteries, which use flammable liquid electrolytes. Increasing the ratio of cathode active materials in composite cathodes enhances the energy density and reduces manufacturing costs. Changes in the ratio of cathode active materials alter the microstructure and chemo-mechanical response of a cathode during operation. Understanding the relationship between composition, microstructure, and chemo-mechanical interactions is critical for optimizing solid-state cathodes. Here, in this study, we engineered composite cathodes with varying ratios of LiNi 0.8 Co 0.1 Mn 0.1 O 2 and Li 6 PS 5 Cl to systematically investigate the role of microstructural evolution in long-term chemo-mechanical transformations. Chemo-mechanical stresses resulting from the volume changes of the cathode active materials led to degradation mechanisms, such as fracture and interfacial delamination. Active material fracture and delamination led to underutilization of active material and significant capacity decay during cycling. Coatings that suppress active material-active material interactions during cycling may aid in suppressing the generation of local stress hotspots.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deciphering when Metal Corrosion is Spontaneous in Molten Fluorides Using Potential-Activity Diagrams

The work identifies the conditions for thermodynamically favored spontaneous metal corrosion using potential-activity diagrams tailored for high-temperature molten fluorides. These diagrams provide insights into the thermodynamic phase stability of both solid and dissolved metal species, such as Cr, Cr(II), Cr(III), Ni, Ni(II), Fe, and Fe(II), along with their potential primary oxidizers, including Eu(III), O2, and HF, over a broad range of theoretical F− anion activities. The work further examines the practical implications, prospects, and challenges associated with the construction of these diagrams. The key objective of this project is to pinpoint crucial thermodynamic variables that substantially affect metal corrosion electrochemistry in the context of molten salt nuclear reactor applications.

Materials Science↗
DOE OSTI2020

Recent developments in the PySCF program package

PySCF is a Python-based general-purpose electronic structure platform that supports first-principles simulations of molecules and solids as well as accelerates the development of new methodology and complex computational workflows. Here, we explain the design and philosophy behind PySCF that enables it to meet these twin objectives. With several case studies, we show how users can easily implement their own methods using PySCF as a development environment. We then summarize the capabilities of PySCF for molecular and solid-state simulations. Finally, we describe the growing ecosystem of projects that use PySCF across the domains of quantum chemistry, materials science, machine learning, and quantum information science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solvent Effects on Catalytic Reactions and Related Phenomena at Liquid-Solid Interfaces

Catalytic reactions involve the direct interaction of reactants, intermediates and products with the catalyst surface. We not only need to control the atomic structure and electronic properties of the active site, but also explore the multiple molecular interactions that occur beyond the active site; they play an essential role in altering the binding and reactivity of surface species. In liquid-phase catalysis, solvents provide additional degrees of freedom in the design of the catalytic process for desirable activity and selectivity. Here, the multi-faceted effects of solvents have a profound impact on the catalyst performance by restricting the mass transfer to the site, tuning the chemical potential of the surface species, competing for active sites, stabilizing the initial and transition states, and causing mechanistic changes by participating in the kinetically relevant elementary steps. This review addresses the different aspects of solvent effects, using a few prototype solid-liquid interfaces to illustrate these fundamental features. Recent experimental and computational studies that provide new insight at the molecular level are examined. Solvent structures in the proximity of the catalyst surface are discussed along with their influence in molecular binding and reaction at the solid-liquid interfaces. Furthermore, opportunities to alter such a solid-liquid interaction by tuning the wettability of the catalyst surfaces are explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Soil Sampling Results for Closure of a Portion of Solid Waste Management Unit #16

This report presents the results of the sampling effort and documents all associated field activities including borehole clearing, soil sample collection, storage and transportation to the analytical laboratories, borehole backfilling and surface restoration, and storage of investigation-derived waste (IDW) for future profiling and disposal by SNL/CA waste management personnel.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Desorption lifetimes and activation energies influencing gas–surface interactions and multiphase chemical kinetics

Abstract. Adsorption and desorption of gases on liquid or solid substrates are involved in multiphase processes and heterogeneous chemical reactions. The desorption energy (Edes0), which depends on the intermolecular forces between adsorbate and substrate, determines the residence time of chemical species at interfaces. We show how Edes0 and temperature influence the net uptake or release of gas species, the rates of surface–bulk exchange and surface or bulk reactions, and the equilibration timescales of gas–particle partitioning. Using literature data, we derive a parameterization to estimate Edes0 for a wide range of chemical species based on the molecular mass, polarizability, and oxygen-to-carbon ratio of the desorbing species independent of substrate-specific properties, which is possible because of the dominant role of the desorbing species' properties. Correlations between Edes0 and the enthalpies of vaporization and solvation are rooted in molecular interactions. The relation between Edes0 and desorption kinetics reflects the key role of interfacial exchange in multiphase processes. For small molecules and semi-volatile organics (VOC, IVOC, SVOC), Edes0 values around 10–100 kJ mol−1 correspond to desorption lifetimes around nanoseconds to days at room temperature. Even higher values up to years are obtained at low temperatures and for low volatile organic compounds (LVOC, ELVOC/ULVOC) relevant for secondary organic aerosols (SOA). Implications are discussed for SOA formation, gas–particle partitioning, organic phase changes, and indoor surface chemistry. We expect these insights to advance the mechanistic and kinetic understanding of multiphase processes in atmospheric and environmental physical chemistry, aerosol science, materials science, and chemical engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Cobalt‐Doped Bismuth Nanosheet Catalyst for Enhanced Electrochemical CO 2 Reduction to Electrolyte‐Free Formic Acid

Electrochemical carbon dioxide (CO 2 ) reduction reaction (CO 2 RR) to valuable liquid fuels, such as formic acid/formate (HCOOH/HCOO − ) is a promising strategy for carbon neutrality. Enhancing CO 2 RR activity while retaining high selectivity is critical for commercialization. To address this, we developed metal-doped bismuth (Bi) nanosheets via a facile hydrolysis method. These doped nanosheets efficiently generated high-purity HCOOH using a porous solid electrolyte (PSE) layer. Among the evaluated metal-doped Bi catalysts, Co-doped Bi demonstrated improved CO 2 RR performance compared to pristine Bi, achieving ~90 % HCOO − selectivity and boosted activity with a low overpotential of ~1.0 V at a current density of 200 mA cm −2 . In a solid electrolyte reactor, Co-doped Bi maintained HCOOH Faradaic efficiency of ~72 % after a 100-hour operation under a current density of 100 mA cm −2 , generating 0.1 M HCOOH at 3.2 V. Density functional theory (DFT) results revealed that Co-doped Bi required a lower applied potential for HCOOH generation from CO 2 , due to stronger binding energy to the key intermediates OCHO* compared to pure Bi. In conclusion, this study shows that metal doping in Bi nanosheets modifies the chemical composition, element distribution, and morphology, improving CO 2 RR catalytic activity performance by tuning surface adsorption affinity and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural characterization of tin in toothpaste by dynamic nuclear polarization enhanced 119 Sn solid-state NMR spectroscopy

Stannous fluoride (SnF 2 ) is an effective fluoride source and antimicrobial agent that is widely used in commercial toothpaste formulations. The antimicrobial activity of SnF 2 is partly attributed to the presence of Sn(II) ions. However, it is challenging to directly determine the Sn speciation and oxidation state within commercially available toothpaste products due to the low weight loading of SnF 2 (0.454 wt% SnF 2 , 0.34 wt% Sn) and the amorphous, semi-solid nature of the toothpaste. Here, we show that dynamic nuclear polarization (DNP) enables 119 Sn solid-state NMR experiments that can probe the Sn speciation within commercially available toothpaste. Solid-state NMR experiments on SnF 2 and SnF 4 show that 19 F isotropic chemical shift and 119 Sn chemical shift anisotropy (CSA) are highly sensitive to the Sn oxidation state. DNP-enhanced 119 Sn magic-angle turning (MAT) 2D NMR spectra of toothpastes resolve Sn(II) and Sn(IV) by their 119 Sn chemical shift tensor parameters. Fits of DNP-enhanced 1D 1 H → 119 Sn solid-state NMR spectra allow the populations of Sn(II) and Sn(IV) within the toothpastes to be estimated. This analysis reveals that three of the four commercially available toothpastes contained at least 80% Sn(II), whereas one of the toothpaste contained a significantly higher amount of Sn(IV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Novel Rotating Flexure-Test Technique for Brittle Materials with Circular Geometries

The four-point bend test is one of the simplest and often the preferred flexural strength evaluation method for brittle materials. In this loading mode, fracture often initiates from a critical surface (or subsurface) flaw when subjected to a tensile stress state. However, if the critical flaw exists on the compression side of the test specimen, it may not activate to grow a crack and hence the resulting flexural strength will be higher than the true value. The goal of this study is to measure the true flexural strength of a solid or hollow cylindrical brittle specimen by ensuring that failure occurs at its weakest point by rotating along its longitudinal axis, thereby exposing and activating its critical surface flaw during a four-point bend test. A novel test fixture has been designed and fabricated, and the true flexural strengths of cylindrical brittle and quasi-brittle tubular specimens have been measured and compared to existing experimental data obtained through traditional four-point bend tests. In this work, experimental results showcase the orientation dependance on flexural strength for various materials. Additionally, similarities between experimental findings and those available in literature, including observations of fracture surfaces and relationships between surface roughness and material strength, are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Solids Performance Testing in a Scaled TSCR System

The Tank Side Cesium Removal (TSCR) project is a technology demonstration that will pretreat Hanford tank waste supernatant in support of the Direct Feed Low-Activity Waste (DFLAW) mission. The TSCR system employs two key separation technologies: dead-end filtration (DEF) and ion exchange (IX) using crystalline silicotitanate (CST) media. DEF will be used to remove undissolved solids from tank waste to protect the functionality of the IX columns and the IX system will remove Cs-137 from tank waste. The separation technologies (DEF and IX) used in TSCR are technically mature and have also been successfully deployed at the Savannah River site in a similar facility known as the Tank Closure Cesium Removal (TCCR) system. While testing with simulants and real waste has been successfully performed under conditions expected during the initial operation of TSCR, test data is absent for assessing off normal high solids loading that may be in the TSCR waste feed. Normal TSCR treatment operations are expected to handle wastes with solids content on the order of 200 ppm, and off normal solids loading could be much larger than the nominal level. The testing program described in this report was conducted to understand the consequence of operating the TSCR system at elevated solids loadings up to the high-solids limit of 15,000 ppm [i.e., 1.5-wt%] identified in the TSCR design basis. Although the system is not required to make throughput above the nominal solids loading, the testing was intended to provide important information related to potential off normal operations. At off normal levels near the high-solids limit, there are potential implications for TSCR performance in the areas of throughput, DEF pressure drop, filter backflush frequency, and IX column pressure drop. In addition, intrusion of solids into the IX column was postulated to impact the Cs-137 loading behavior by promoting channeling or flow maldistribution in the column; since the magnitude of the postulated effect was unknown, assessing it was also of interest. The testing was performed using representative waste simulants and a prototypic, integrated TSCR system designed and assembled specifically to conduct the high solids performance assessment. Overall, the scaled TSCR testing demonstrated that full-scale unit operations can succeed in fulfilling their processing objectives in the presence of solids up to 3,000 ppm, but there are potential performance challenges to filtration operations at solids loadings as low as ~500 ppm. The severity of the challenge is likely to be dependent on the type and size distribution of solids, of which the current testing only examined a single type and size distribution. To provide some flexibility for future full-scale operations, the results of the testing suggest two possible risk reduction strategies that can be implemented without any changes in TSCR design or configuration. One option would be to enact an administrative limit on the solids loading to protect TSCR from feeds that are likely to require a high DEF swap frequency. Another option is to permit operation of the DEFs at differential pressures greater than 2 psid before swapping filters. The selection of a higher differential pressure target is not anticipated to adversely impact DEF backflushing efficacy and would reduce both swap frequency and the amount of waste sent to AP-108.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Electrolyte-Dependent, “Microscopically Irreversible” H-Atom Transfer Kinetics of Ce-Based Metal–Organic Framework, Ce-MOF-808

Redox reactions at the interface of metal oxides and protic electrolytes almost always involve protons and electrons in equal amounts. Given the stoichiometry, these proton-coupled electron transfer (PCET) reactions are thermochemically equivalent to net H-atom transfer (HAT) reactions. The correlation between the chemical nature of solid catalysts and HAT kinetics has been employed for decades as the design principle for energy-relevant reactions (e.g., reactions of 2H + /H 2 ). More recently, chemists have experimentally determined that a change in liquid electrolytes that alters the microenvironment at the redox-active sites has an equally profound impact on electrocatalysis involving PCET/HAT. Yet, precise correlations between the chemical nature of electrolytes and the PCET kinetics are, to date, rare in the literature. Herein, we report our findings using the Ce-based metal−organic framework, Ce-MOF-808, as a model system. Each Ce 6 (μ 3 −O) 4 (μ 3 − OH) 4 (OH) 6 (H 2 O) 6 node of this MOF undergoes a 1H + /1e − redox reaction. Using chronoamperometry and the Cottrell analysis, we have determined that the PCET hopping kinetics within the pores of Ce-MOF-808 can change by orders of magnitude by altering the buffer species and the proton activity of the electrolyte. Furthermore, in all buffers, reductive reactions were ∼3−10 times faster in kinetics than the reverse oxidative reaction with the same electrochemical driving force, suggesting that the system, at first glance, violates the principle of microscopic reversibility. Isothermal titration calorimetry (ITC) and computational simulations corroborated that the buffer-node binding thermodynamics are quite distinct, depending on the chemical nature of the buffer and the oxidation state of the node. Together, these results suggest that the substrate and the product during the oxidative vs reductive reaction of Ce-MOF-808 are chemically different species, which explains the apparent ‘microscopic irreversibility.’ Thus, the rational modulation of electrolytes can dramatically enhance PCET kinetics, even though the solid electrodes remain identical. Implications of these findings are contrasted with the electrochemical/electrocatalytic behavior of other redox-active MOFs, heterogeneous catalysts, and enzymatic systems at the solid−liquid interface.

Ce-based MOF↗
DOE OSTI2023

Suppressing Universal Cathode Crossover in High‐Energy Lithium Metal Batteries via a Versatile Interlayer Design**

Abstract The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high‐energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as‐induced dual‐gradient solid‐electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm −2 . Moreover, X‐ray photoelectron spectroscopy and synchrotron X‐ray experiments revealed that N‐rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high‐energy cathode materials including LiNi 0.7 Mn 0.2 Co 0.1 O 2 , Li 1.2 Co 0.1 Mn 0.55 Ni 0.15 O 2 , and sulfur demonstrate significantly improved cycling stability with high cathode loading.

Xie, Chuyi↗
DOE OSTI2023

Suppressing Universal Cathode Crossover in High‐Energy Lithium Metal Batteries via a Versatile Interlayer Design**

Abstract The universal cathode crossover such as chemical and oxygen has been significantly overlooked in lithium metal batteries using high‐energy cathodes which leads to severe capacity degradation and raises serious safety concerns. Herein, a versatile and thin (≈25 μm) interlayer composed of multifunctional active sites was developed to simultaneously regulate the Li deposition process and suppress the cathode crossover. The as‐induced dual‐gradient solid‐electrolyte interphase combined with abundant lithiophilic sites enable stable Li stripping/plating process even under high current density of 10 mA cm −2 . Moreover, X‐ray photoelectron spectroscopy and synchrotron X‐ray experiments revealed that N‐rich framework and CoZn dual active sites can effectively mitigate the undesired cathode crossover, hence significantly minimizing Li corrosion. Therefore, assembled lithium metal cells using various high‐energy cathode materials including LiNi 0.7 Mn 0.2 Co 0.1 O 2 , Li 1.2 Co 0.1 Mn 0.55 Ni 0.15 O 2 , and sulfur demonstrate significantly improved cycling stability with high cathode loading.

25 ENERGY STORAGE↗
DOE OSTI2022

Methane Remediation using Biocatalysts in Gas-Solid Reactor – Challenges and Prospects

One of the engineering grand challenges of the 21 st century is to develop carbon sequestration methods due to human activities. Carbon dioxide and methane are the two most abundant greenhouse gases with methane having a higher global warming potential (GWP) than carbon dioxide. Methanotrophs are a time of bacteria that consumes methane and can produce different kinds of organic acids. Wild methanotrophs produce a range of products and can be specifically selected and genetically engineered to produce a specific product. Improvement of bioreactor design for a solid-gas mass transfer is necessary for this technology to move forward. Poor solubility of methane requires high energy input for the conversion of methane. This paper reviews some relevant technology in bioreactor design of gas and liquid/solid interfaces and describes the scope of the project here at LLNL and the objectives it seeks to achieve in the geometric design of reactor of methanotroph.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydrophobic versus Hydrophilic Interfacial Coatings on Silicon Nanoparticles Teach Us How to Design the Solid Electrolyte Interphase in Silicon-Based Li-Ion Battery Anodes

Herein, we evaluate the effect of covalently attached molecular coating hydrophobicity on the surface of the silicon nanoparticle (Si NP) active anode material for Li-ion batteries. The experiments are a means to identify the interfacial properties that help minimize electrochemical side reactions during cycling. Preformed coatings on the Si NP surfaces prior to electrode fabrication mimic the ionically conducting and electronically insulating properties of the solid electrolyte interphase (SEI). Hydrophilic oligomers such as polyethylene oxide (PEO) and other related structures are commonly identified as Li+-conducting components of the SEI. Here, we study the effect of such hydrophilic PEO versus hydrophobic alkyl molecular coatings on Si NP anode electrochemical performance. We also study the effect of the PEO oligomer length and the resulting effective thickness of the interfacial coating on the electrochemical performance. We find that PEO oligomers electrochemically isolate Si NPs when the PEO coating thickness approaches the electron tunneling distance of ~2.5 nm. Surprisingly, the thickness of the PEO-based coatings has a negligible effect on their ability to minimize electrochemical side reactions as measured by Coulombic efficiency. These results reveal how the interfacial coating on silicon anode materials should differ from an operando-formed SEI layer and discuss design strategies for an ideal interfacial active material coating based on these results.

25 ENERGY STORAGE↗
DOE OSTI2025

N‐Heterocyclic Carbene Functionalization of 2D Transition Metal Dichalcogenides via a Frustrated Lewis Pair Strategy

Molecular functionalization of 2D transition metal dichalcogenides (TMDs), which unites tailorability of organic molecules and robustness of inorganic solids, is important for tuning their surface properties. While it is common to leverage the electronic effect of organic ligands to functionalize TMDs, the corresponding steric hinderance has remained elusive and underexplored. Herein N‐heterocyclic carbene (NHC) functionalization of WS 2 is demonstrated via a frustrated Lewis pair (FLP) route, which exploits both the electronic and steric effect for TMD functionalization. The Lewis base, 1,3‐bis(2,4,6‐trimethylphenyl)imidazol‐2‐ylidene (IMes), is anchored to the sulfur vacancy sites (Lewis acid) of the WS 2 nanostructures with the hybrid‐interface‐mediated steric hinderance, mimicking the FLP chemistry and enabling dihydrogen cleavage at room temperature and atmospheric pressure. Solid‐state nuclear magnetic resonance (ssNMR) results reveal the local chemical environment of the activated hydrogen species, which can be transferred for room‐temperature hydrogenation reactions. Finally, the insights are useful for designing weak, non‐covalent bonds to modify the 2D surface of TMDs for a broad scope of applications.

2D materials↗
DOE OSTI2025

2D Vacancy Confinement in Anatase TiO 2 for Enhanced Photocatalytic Activities

Abstract Light‐driven energy conversion devices call for the atomic‐level manipulation of defects associated with electronic states in solids. However, previous approaches to produce oxygen vacancy (V O ) as a source of sub‐bandgap energy levels have hampered the precise control of the distribution and concentration ofV O . Here, a new strategy to spatially confineV O at the homo‐interfaces is demonstrated by exploiting the sequential growth of anatase TiO 2 under dissimilar thermodynamic conditions. Remarkably, metallic behavior with high carrier density and electron mobility is observed after sequential growth of the TiO 2 films under low pressure and temperature (L‐TiO 2 ) on top of high‐quality anatase TiO 2 epitaxial films (H‐TiO 2 ), despite the insulating properties of L‐TiO 2 and H‐TiO 2 single layers. Multiple characterizations elucidate that theV O layer is geometrically confined within 4 unit cells at the interface, along with low‐temperature crystallization of upper L‐TiO 2 films; this 2DV O layer is responsible for the formation of in‐gap states, promoting photocarrier lifetime (≈300%) and light absorption. These results suggest a synthetic strategy to locally confine functional defects and emphasize how sub‐bandgap energy levels in the confined imperfections influence the kinetics of light‐driven catalytic reactions.

Chemistry↗