Results for “Vehicle Technologies Office” — Page 24

NASA NTRS1994

Fast Track NTR Systems Assessment for NASA's First Lunar Outpost Scenario

Integrated systems and mission study results are presented which quantify the rationale and benefits for developing and using nuclear thermal rocket (NTR) technology for returning humans to the moon in the early 2000's. At present, the Exploration Program Office (ExPO) is considering chemical propulsion for its 'First Lunar Outpost' (FLO) mission, and NTR propulsion for the more demanding Mars missions to follow. The use of an NTR-based lunar transfer stage, capable of evolving to Mars mission applications, could result in an accelerated schedule, reduced cost approach to moon/Mars exploration. Lunar mission applications would also provide valuable operational experience and serve as a 'proving ground' for NTR engine and stage technologies. In terms of performance benefits, studies indicate that an expendable NTR stage powered by two 50 klbf engines can deliver approximately 96 metric tons (t) to trans-lunar injection (TLI) conditions for an initial mass in low earth orbit (IMLEO) of approximately 199 t compared to 250 t for a cryogenic chemical TLI stage. The NTR stage liquid hydrogen (LH2) tank has a 10 m diameter, 14.8 m length, and 68 t LH2 capacity. The NTR utilizes a 'graphite' fuel form consisting of coated UC2 particles in a graphite substrate, and has a specific impulse capability of approximately 870 s, and an engine thrust-to-weight ratio of approximately 4.8. The NTR stage and its piloted FLO lander has a total length of approximately 38 m and can be launched by a single Saturn V-derived heavy lift launch vehicle (HLLV) in the 200 to 250 t-class range. The paper summarizes NASA's First Lunar Outpost scenario, describes characteristics for representative engine/stage configurations, and examines the impact on engine selection and vehicle design resulting from a consideration of alternative NTR fuel forms and lunar mission profiles.

Borowski, Stanley K.↗

DOE OSTI2021

Traveling Wave Relays for Distribution Feeder Protection with High Penetrations of Distributed Energy Resources: Preprint

Increased penetration of power electronics interfaced Distributed Energy Resources (DER) like PV, electric vehicle and battery storage in the distribution system (both in numbers and sizes) may cause bi-directional power flows under normal operation. In addition, they contribute low fault current under short circuit conditions. These two changes can impact the proper operation of legacy protection systems. This can add additional challenges during weak grid and islanded operation. In this research, traveling wave (high frequency) signature based protection scheme is proposed for future distribution systems. Simulations are performed under different transient scenarios to provide insight into the high frequency signatures to show the traveling wave behavior. Finally, this paper discusses the importance of sensing and digital processing requirements for traveling-wave protection in distribution system.

41 EE - Solar Energy Technologies Office (EE-4S)↗

NASA NTRS2012

Desert Research and Technology Studies (DRATS) Traverse Planning

Slide 1] The Desert Research and Technology Studies (DRATS) include large scale field tests of manned lunar surface exploration systems; these tests are sponsored by the Director s Office of Integration (DOI) [sic, Directorate Integration Office (DIO)] within the Constellation Program and they include geological exploration objectives along well designed traverses. These traverses are designed by the Traverse Team, an ad hoc group of some 10 geologists form NASA and academia, as well as experts in mission operation who define the operational constraints applicable to specific simulation scenarios. [Slide 2] These DRATS/DOI tests focus on 1) the performance of major surface systems, such as rovers, mobile habitats, communication architecture, navigation tools, earth-moving equipment, unmanned reconnaissance robots etc. under realistic field conditions and 2) the development of operational concepts that integrate all of these systems into a single, optimized operation. The participation of science is currently concentrating on geological sciences, with the objective of developing suitable tools and documentation protocols to sample representative rocks for Earth return, and to generate some conceptual understanding of the ground support structure that will be needed for the real time science-support of a lunar surface crew. [Slide 3] Major surface systems exercised in the June 2008 analog tests at the Moses Lake site, WA. [Upper left] The Chariot Rover (developed at Johnson Space Center) is an unpressurized vehicle driven by fully suited crews. [Upper right] Mobile Habitat provided by the Jet Propulsion Laboratory. Chariot is the more nimble and mobile vehicle and the idea is to drive the habitat remotely to some rendezvous place where Chariot would catch up - after a lengthy traverse - at the end of the day. [Lower left] The K-10 remotely operated robot (provided by NASA Ames Research Center) conducting scientific/geologic reconnaissance of the prospective traverse region, locating specific sites for more detailed exploration by Chariot and its crew. [Lower right] This earth-moving equipment (provided by NASA KSC) can be attached to Chariot and is envisioned to, for example, level an outpost site or to mine lunar soi

Horz, Friedrich↗

NASA NTRSDate not supplied

Characterization of in-Space Propulsion Trade Space to Support Initial Human Mars Segment

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon to Mars blueprint objectives. The focus of the Architecture Development Office has been to decompose the blueprint objectives into the characteristics and needs for both lunar and Mars missions and develop functional needs to enable an integrated end-to-end mission architecture. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and return crew safely back to Earth. The Mars Architecture Team has been evaluating four in-space transportation options to satisfy this functional need: 1) Hybrid Nuclear Electric/ Chemical Propulsion, 2) Nuclear Thermal Propulsion, 3) Hybrid Solar Electric/ Chemical Propulsion, and 4) All-Chemical propulsion. To answer the question “which transportation option is best?” decision makers will need to understand the performance characteristics—and limitations—for each architecture in the context of their preferred metric. Each option could be considered “better” than the others, depending on whether the primary selection criteria is fast, cheap, maximum cross-government applicability, maximizes commercial capabilities, and/or any other desired metrics. The Mars Architecture Team has completed considerable analysis on the Hybrid Nuclear Electric/Chemical Propulsion concept over the past three years. The Space Nuclear Propulsion program has also conducted significant work on the Nuclear Thermal Propulsion concept. The Hybrid Solar Electric/Chemical Propulsion concept, derived from technology planned for the Gateway program, was originally configurated for minimum vehicle stack mass (and, hence, minimum Earth-launched mass/cost), leveraging a highly efficient propulsion system on a minimum energy Conjunction Class trajectory. Historically, All-Chemical concepts were considered impractical due to the enormous propellant mass required, even for minimum energy Conjunction Class/long stay mission opportunities. However, considering the emerging commercial heavy-lift capabilities, the concept must be reevaluated across a range of concepts that leverage reusable launch vehicle capabilities to reduce the cost of launching large quantities of transportation elements needed for missions of various duration. This paper aims to provide an overview of the in-space transportation assessment work that is on-going within NASA.

Mars↗

NASA NTRSDate not supplied

Characterization of in-Space Propulsion Trade Space to Support Initial Human Mars Segment

The National Aeronautics and Space Administration’s Exploration Systems Development Mission Directorate has been developing architecture concepts for human missions to Mars in alignment with the agency’s Moon to Mars blueprint objectives. The focus of the Architecture Development Office has been to decompose the blueprint objectives into the characteristics and needs for both lunar and Mars missions and develop functional needs to enable an integrated end-to-end mission architecture. One of the key components of a human Mars mission is the in-space transportation system that delivers crew and cargo to Mars vicinity and return crew safely back to Earth. The Mars Architecture Team has been evaluating four in-space transportation options to satisfy this functional need: 1) Hybrid Nuclear Electric/ Chemical Propulsion, 2) Nuclear Thermal Propulsion, 3) Hybrid Solar Electric/ Chemical Propulsion, and 4) All-Chemical propulsion. To answer the question “which transportation option is best?” decision makers will need to understand the performance characteristics—and limitations—for each architecture in the context of their preferred metric. Each option could be considered “better” than the others, depending on whether the primary selection criteria is fast, cheap, maximum cross-government applicability, maximizes commercial capabilities, and/or any other desired metrics. The Mars Architecture Team has completed considerable analysis on the Hybrid Nuclear Electric/Chemical Propulsion concept over the past three years. The Space Nuclear Propulsion program has also conducted significant work on the Nuclear Thermal Propulsion concept. The Hybrid Solar Electric/Chemical Propulsion concept, derived from technology planned for the Gateway program, was originally configurated for minimum vehicle stack mass (and, hence, minimum Earth-launched mass/cost), leveraging a highly efficient propulsion system on a minimum energy Conjunction Class trajectory. Historically, All-Chemical concepts were considered impractical due to the enormous propellant mass required, even for minimum energy Conjunction Class/long stay mission opportunities. However, considering the emerging commercial heavy-lift capabilities, the concept must be reevaluated across a range of concepts that leverage reusable launch vehicle capabilities to reduce the cost of launching large quantities of transportation elements needed for missions of various duration. This paper aims to provide an overview of the in-space transportation assessment work that is on-going within NASA.

Mars↗

DOE OSTI2021

Traveling Wave Relays for Distribution Feeder Protection with High Penetrations of Distributed Energy Resources

Increased penetration of power electronics interfaced Distributed Energy Resources (DER) like PV, electric vehicle and battery storage in the distribution system (both in numbers and sizes) may cause bi-directional power flows under normal operation. In addition, they contribute low fault current under short circuit conditions. These two changes can impact the proper operation of legacy protection systems. This can add additional challenges during weak grid and islanded operation. In this research, traveling wave (high frequency) signature based protection scheme is proposed for future distribution systems. Simulations are performed under different transient scenarios to provide insight into the high frequency signatures to show the traveling wave behavior. Finally, this paper discusses the importance of sensing and digital processing requirements for traveling-wave protection in distribution system.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2021

Traveling Wave Relays for Distribution Feeder Protection with High Penetrations of Distributed Energy Resources

Increased penetration of power electronics interfaced Distributed Energy Resources (DER) like PV, electric vehicle and battery storage in the distribution system (both in numbers and sizes) may cause bi-directional power flows under normal operation. In addition, they contribute low fault current under short circuit conditions. These two changes can impact the proper operation of legacy protection systems. This can add additional challenges during weak grid and islanded operation. In this research, traveling wave (high frequency) signature based protection scheme is proposed for future distribution systems. Simulations are performed under different transient scenarios to provide insight into the high frequency signatures to show the traveling wave behavior. Finally, this paper discusses the importance of sensing and digital processing requirements for traveling-wave protection in distribution system.

41 EE - Solar Energy Technologies Office (EE-4S)↗

NASA NTRS1992

Status report, June 1988 - April 1992

The Mars Mission Research Center (MMRC) is one of nine University Space Engineering Research Centers established in June 1988 by NASA's Office of Aeronautics and Space Technology to broaden the nation's engineering capability to meet the critical needs fo the civilian space program. It includes North Carolina State University (NCSU) at Raleigh and on North Carolina A&T State University at Greensboro. The goal of the Center is to focus on research and educational technologies necessary for planetary exploration, especially transportation to and from our moon and Mars. The research combines mission analysis and design, hypersonic aerodynamics, structures and controls, composite materials, and fabrications. Covered here are activities of the Center from June to April 1992. The Center supports 26 graduate students, 29 undergraduates, 27 faculty and 6 staff. An additional 88 undergraduates worked on four special projects. Three facilities at A&T were renovated and a new 7,000 square foot facility was occupied at NCSU in October 1991. Five laboratories have been developed for composite processing and fabrication facility (A&T), materials testing (A&T), weaving (NCSU), braiding (NCSU), and structures (NCSU). During the past two years, the Center added a new dimension to its program - special projects which involve analysis, design, construction, and testing. The first two projects were full-scale research models of a Mars aerobrake and the HL-20 Personnel Launch System. Both projects received considerable new coverage and appeared in national publications. Additional projects include a model of a Mars Exclusion Vehicle, an Orbiter Ejector, and a Remotely Operated Vehicle. The Orbiter Ejector is scheduled to fly on Shuttle Flight STS-47 in October 1992. Special projects have increased undergraduate student participation and provided a mechanism for more interaction between the universities, NASA centers, and industries. The faculty developed 26 new courses related to the activities of the Center. They conducted four workshops on interplanetary spacecraft, lunar/Mars aerobrakes, spacecraft controls, and aerodynamic heating. The Outreach Program developed into a significant component of the Center. Faculty and students have conducted 12 tours of facilities and given 67 lectures to schools (grade k-12) and civic organizations.

Source record↗

NASA NTRS1988

An intelligent training system for space shuttle flight controllers

An autonomous intelligent training system which integrates expert system technology with training/teaching methodologies is described. The system was designed to train Mission Control Center (MCC) Flight Dynamics Officers (FDOs) to deploy a certain type of satellite from the Space Shuttle. The Payload-assist module Deploys/Intelligent Computer-Aided Training (PD/ICAT) system consists of five components: a user interface, a domain expert, a training session manager, a trainee model, and a training scenario generator. The interface provides the trainee with information of the characteristics of the current training session and with on-line help. The domain expert (DeplEx for Deploy Expert) contains the rules and procedural knowledge needed by the FDO to carry out the satellite deploy. The DeplEx also contains mal-rules which permit the identification and diagnosis of common errors made by the trainee. The training session manager (TSM) examines the actions of the trainee and compares them with the actions of DeplEx in order to determine appropriate responses. A trainee model is developed for each individual using the system. The model includes a history of the trainee's interactions with the training system and provides evaluative data on the trainee's current skill level. A training scenario generator (TSG) designs appropriate training exercises for each trainee based on the trainee model and the training goals. All of the expert system components of PD/ICAT communicate via a common blackboard. The PD/ICAT is currently being tested. Ultimately, this project will serve as a vehicle for developing a general architecture for intelligent training systems together with a software environment for creating such systems.

Loftin, R. Bowen↗

NASA NTRS1988

An intelligent training system for space shuttle flight controllers

An autonomous intelligent training system which integrates expert system technology with training/teaching methodologies is described. The system was designed to train Mission Control Center (MCC) Flight Dynamics Officers (FDOs) to deploy a certain type of satellite from the Space Shuttle. The Payload-assist module Deploys/Intelligent Computer-Aided Training (PD/ICAT) system consists of five components: a user interface, a domain expert, a training session manager, a trainee model, and a training scenario generator. The interface provides the trainee with information of the characteristics of the current training session and with on-line help. The domain expert (Dep1Ex for Deploy Expert) contains the rules and procedural knowledge needed by the FDO to carry out the satellite deploy. The Dep1Ex also contains mal-rules which permit the identification and diagnosis of common errors made by the trainee. The training session manager (TSM) examines the actions of the trainee and compares them with the actions of Dep1Ex in order to determine appropriate responses. A trainee model is developed for each individual using the system. The model includes a history of the trainee's interactions with the training system and provides evaluative data on the trainee's current skill level. A training scenario generator (TSG) designs appropriate training exercises for each trainee based on the trainee model and the training goals. All of the expert system components of PD/ICAT communicate via a common blackboard. The PD/ICAT is currently being tested. Ultimately, this project will serve as a vehicle for developing a general architecture for intelligent training systems together with a software environment for creating such systems.

Loftin, R. Bowen↗

NASA NTRS2001

Activities on Space Debris in U.S.

In the U.S. space debris activities are addressed at all government levels, from the Executive Office of the President to the individual federal agencies to specialized centers, laboratories, organizations, and research groups. U.S. Space Policy specifically challenges government agencies to seek to minimize the creation of space debris and to promote debris minimization practices both domestically and internationally. A set of space debris mitigation standard practices has been developed and adopted by relevant US government agencies, and their application by the commercial aerospace community is highly encouraged. A growing number of US government agencies have issued their own space debris mitigation policies, directives, regulations, and standards. Space debris research, including the definition and modeling of the current and future near-Earth space environment and the development of debris protection technologies, is principally conducted by NASA and the Department of Defense. The U.S. Space Surveillance Network continues to provide the most complete and timely characterization of the population of space debris larger than 10 cm. During the past several years major advancements have been achieved in extending this environment definition in LEO to include particles as small as only a few millimeters. The inspection of returned spacecraft surfaces continues to shed light on the even smaller debris population. With improvements in computer technology, new and more capable programs have been and are being developed to solve a number of operational and research problems. Finally, the academic and industrial sectors of the U.S. are also increasing their participation in and contributions to space debris operations and research. The cooperation of satellite and launch vehicle developers and operators is essential to the U.S. objective of promoting the preservation of the space environment for future generations.

Johnson, Nicholas L.↗

NASA NTRS2017

NASA's Bio-Inspired Acoustic Absorber Concept

Transportation noise pollutes our worlds cities, suburbs, parks, and wilderness areas. NASAs fundamental research in aviation acoustics is helping to find innovative solutions to this multifaceted problem. NASA is learning from nature to develop the next generation of quiet aircraft.The number of road vehicles and airplanes has roughly tripled since the 1960s. Transportation noise is audible in nearly all the counties across the US. Noise can damage your hearing, raise your heart rate and blood pressure, disrupt your sleep, and make communication difficult. Noise pollution threatens wildlife when it prevents animals from hearing prey, predators, and mates. Noise regulations help drive industry to develop quieter aircraft. Noise standards for aircraft have been developed by the International Civil Aviation Organization and adopted by the US Federal Aviation Administration. The US National Park Service is working with the Federal Aviation Administration to try to balance the demand for access to the parks and wilderness areas with preservation of the natural soundscape. NASA is helping by conceptualizing quieter, more efficient aircraft of the future and performing the fundamental research to make these concepts a reality someday. Recently, NASA has developed synthetic structures that can absorb sound well over a wide frequency range, and particularly below 1000 Hz, and which mimic the acoustic performance of bundles of natural reeds. We are adapting these structures to control noise on aircraft, and spacecraft. This technology might be used in many other industrial or architectural applications where acoustic absorbers have tight constraints on weight and thickness, and may be exposed to high temperatures or liquids. Information about this technology is being made available through reports and presentations available through the NASA Technical Report Server, http:ntrs.nasa.gov. Organizations who would like to collaborate with NASA or commercialize NASAs technology are encouraged to contact the NASA Glenn Technology Transfer Office, https:technology.grc.nasa.gov. The NASA Glenn Office of Education https:www.nasa.govcentersglenneducationindex.html and the NASA Glenn Virtual Interchange for Nature-Inspired Exploration https:www.grc.nasa.govvine are also helping to make research like this accessible to the public and students of all ages.

Acoustics↗

NASA NTRSDate not supplied

Solar Polar Imager Concept

During late 2019 and early 2020, the Advanced Concepts Office design team at NASA’s George C. Marshall Space Flight Center (MSFC) completed a concept study for a Solar Polar Imager (SPI) mission. The goal of the study was to perform a preliminary design of the spacecraft bus containing a minimum set of science instruments and supporting subsystems. The science goal of the SPI mission is to better understand the Sun and the heliosphere by observing the Sun from a high heliographic latitude. A highly inclined orbit (of 75°) allows helioseismology observations from a high latitude, providing measurements in the high latitude regions for the first time. The orbit also allows measurements of the photospheric magnetic fields in the polar regions, as well as direct measurements of the heliospheric magnetic field and solar wind. The high latitude gives the spacecraft a unique top-down view of coronal mass ejections (CMEs) that could affect space weather around Earth and allow the velocity and directions of these CMEs to be better quantified. Solar sail technology is chosen as the propulsion option necessary to deliver the spacecraft to a heliocentric circular orbit at 0.48 AU and an inclination of 75°. The sail area is restricted to 7000 m2, the maximum size that can be developed in the near term. The sail is also assumed to rotate at 1 rpm to avoid buckling of the supporting booms. The total launch mass is 349 kg, which consists of 233 kg for the SPI Bus, 52 kg for the solar sail and deployment mechanisms, and 64 kg for the Spin-up Bus/launch vehicle payload adapter. Dropping the Spin-up Bus after sail deployment, the characteristic acceleration of the sail is about 0.22 mm/s2. The resulting total mission time is just over 13 years, which includes a 3-year duration at the 75° inclination.

Dan Thomas↗

NASA NTRSDate not supplied

Solar Polar Imager Concept

During late 2019 and early 2020, the Advanced Concepts Office design team at NASA’s George C. Marshall Space Flight Center (MSFC) completed a concept study for a Solar Polar Imager (SPI) mission. The goal of the study was to perform a preliminary design of the spacecraft bus containing a minimum set of science instruments and supporting subsystems. The science goal of the SPI mission is to better understand the Sun and the heliosphere by observing the Sun from a high heliographic latitude. A highly inclined orbit (of 75°) allows helioseismology observations from a high latitude, providing measurements in the high latitude regions for the first time. The orbit also allows measurements of the photospheric magnetic fields in the polar regions, as well as direct measurements of the heliospheric magnetic field and solar wind. The high latitude gives the spacecraft a unique top-down view of coronal mass ejections (CMEs) that could affect space weather around Earth and allow the velocity and directions of these CMEs to be better quantified. Solar sail technology is chosen as the propulsion option necessary to deliver the spacecraft to a heliocentric circular orbit at 0.48 AU and an inclination of 75°. The sail area is restricted to 7000 m2, the maximum size that can be developed in the near term. The sail is also assumed to rotate at 1 rpm to avoid buckling of the supporting booms. The total launch mass is 349 kg, which consists of 233 kg for the SPI Bus, 52 kg for the solar sail and deployment mechanisms, and 64 kg for the Spin-up Bus/launch vehicle payload adapter. Dropping the Spin-up Bus after sail deployment, the characteristic acceleration of the sail is about 0.22 mm/s2. The resulting total mission time is just over 13 years, which includes a 3-year duration at the 75° inclination.

Dan Thomas↗

NASA NTRS1992

Control-structure-thermal interactions in analysis of lunar telescopes

The lunar telescope project was an excellent model for the CSTI study because a telescope is a very sensitive instrument, and thermal expansion or mechanical vibration of the mirror assemblies will rapidly degrade the resolution of the device. Consequently, the interactions are strongly coupled. The lunar surface experiences very large temperature variations that range from approximately -180 C to over 100 C. Although the optical assemblies of the telescopes will be well insulated, the temperature of the mirrors will inevitably fluctuate in a similar cycle, but of much smaller magnitude. In order to obtain images of high quality and clarity, allowable thermal deformations of any point on a mirror must be less than 1 micron. Initial estimates indicate that this corresponds to a temperature variation of much less than 1 deg through the thickness of the mirror. Therefore, a lunar telescope design will most probably include active thermal control, a means of controlling the shape of the mirrors, or a combination of both systems. Historically, the design of a complex vehicle was primarily a sequential process in which the basic structure was defined without concurrent detailed analyses or other subsystems. The basic configuration was then passed to the different teams responsible for each subsystem, and their task was to produce a workable solution without requiring major alterations to any principal components or subsystems. Consequently, the final design of the vehicle was not always the most efficient, owing to the fact that each subsystem design was partially constrained by the previous work. This procedure was necessary at the time because the analysis process was extremely time-consuming and had to be started over with each significant alteration of the vehicle. With recent advances in the power and capacity of small computers, and the parallel development of powerful software in structural, thermal, and control system analysis, it is now possible to produce very detailed analyses of intermediate designs in a much shorter period of time. The subsystems can thus be designed concurrently, and alterations in the overall design can be quickly adopted into each analysis; the design becomes an iterative process in which it is much easier to experiment with new ideas, configurations, and components. Concurrent engineering has the potential to produce efficient, highly capable designs because the effect of one subystem on another can be assessed in much more detail at a very early point in the program. The research program consisted of several tasks: scale a prototype telescope assembly to a 1 m aperture, develop a model of the telescope assembly by using finite element (FEM) codes that are available on site, determine structural deflections of the mirror surfaces due to the temperature variations, develop a prototype control system to maintain the proper shape of the optical elements, and most important of all, demonstrate the concurrent engineering approach with this example. In addition, the software used for the finite element models and thermal analysis was relatively new within the Program Development Office and had yet to be applied to systems this large or complex; understanding the software and modifying it for use with this project was also required. The I-DEAS software by Structural Dynamics Research Corporation (SDRC) was used to build the finite element models, and TMG developed by Maya Heat Transfer Technologies, Ltd. (which runs as an I-DEAS module) was used for the thermal model calculations. All control system development was accomplished with MATRIX(sub X) by Integrated Systems, Inc.

Thompson, Roger C.↗

NASA NTRS1999

An Overview of the NASA Sounding Rockets and Balloon Programs

The U.S. National Aeronautics and Space Administration (NASA) Sounding Rockets and Balloon Programs conduct a combined total of approximately fifty to sixty missions per year in support of the NASA scientific community. These missions are provided in support of investigations sponsored by NASA'S Offices of Space Science, Life and Microgravity Sciences & Applications, and Earth Science. The Goddard Space Flight Center has management and implementation responsibility for these programs. The NASA Sounding Rockets Program has continued to su,pport the science community by integrating their experiments into the sounding rocket payload and providing the rocket vehicle and launch operations necessary to provide the altitude/time required obtain the science objectives. The sounding rockets continue to provide a cost-effective way to make in situ observations from 50 to 1500 km in the near-earth environment and to uniquely cover the altitude regime between 50 km and 130 km above the Earth's surface, which is physically inaccessible to either balloons or satellites. A new architecture for providing this support has been introduced this year with the establishment of the NASA Sounding Rockets Contract. The Program has continued to introduce improvements into their operations and ground and flight systems. An overview of the NASA Sounding Rockets Program with special emphasis on the new support contract will be presented. The NASA Balloon Program continues to make advancements and developments in its capabilities for support of the scientific ballooning community. Long duration balloon (LDB) is a prominent aspect of the program with two campaigns scheduled for this calendar year. Two flights are scheduled in the Northern Hemisphere from Fairbanks, Alaska, in June and two flights are scheduled from McMurdo, Antarctica, in the Southern Hemisphere in December. The comprehensive balloon research and development (R&D) effort has continued with advances being made across the spectrum of balloon related disciplines. As a result of these technology advancements a new ultra long duration balloon project (ULDB) for the development of a 100- day duration balloon capability has been initiated. The ULDB will rely upon new balloon materials and designs to accomplish its goals. The Program has also continued to introduce new technology and improvements into flights systems, ground systems and operational techniques. An overview of the various aspects of the NASA Balloon Program will be presented.

Flowers, Bobby J.↗

NASA NTRS2010

Streamlining Payload Integration

Payload integration onto space transport vehicles and the International Space Station (ISS) is a complex process. Yet, cargo transport is the sole reason for any space mission, be it for ferrying humans, science, or hardware. As the largest such effort in history, the ISS offers a wide variety of payload experience. However, for any payload to reach the Space Station under the current process, Payload Developers face a list of daunting tasks that go well beyond just designing the payload to the constraints of the transport vehicle and its stowage topology. Payload customers are required to prove their payload s functionality, structural integrity, and safe integration - including under less than nominal situations. They must also plan for or provide training, procedures, hardware labeling, ground support, and communications. In addition, they must deal with negotiating shared consumables, integrating software, obtaining video, and coordinating the return of data and hardware. All the while, they must meet export laws, launch schedules, budget limits, and the consensus of more than 12 panel and board reviews. Despite the cost and infrastructure overhead, payload proposals have increased. Just in the span from FY08 to FY09, the NASA Payload Space Station Support Office budget rose from $78M to $96M in attempt to manage the growing manifest, but the potential number of payloads still exceeds available Payload Integration Management manpower. The growth has also increased management difficulties due to the fact that payloads are more frequently added to a flight schedule late in the flow. The current standard ISS template for payload integration from concept to payload turn-over is 36 months, or 18 months if the payload already has a preliminary design. Customers are increasingly requiring a turn-around of 3 to 6-months to meet market needs. The following paper suggests options for streamlining the current payload integration process in order to meet customer schedule needs and reduce costs for both the integration support teams and the developers, without reducing quality or compromising safety. Issues for the key integration areas of planning, training, verification, and safety are presented in a Root-Cause Analysis study, with plausible solutions provided that involve technology and tools already available to the ISS community. Although based upon the ISS process, the payload integration techniques outlined herein also offer an integration template for any space transport endeavor.

Lufkin, Susan N.↗

NASA NTRS2008

NASA's Ares I and Ares V Launch Vehicles -- Effective Space Operations Through Efficient Ground Operations

The United States (U.S.) plans to return to the Moon by 2020, with the development of a new human-rated space transportation system to replace the Space Shuttle, which is due for retirement in 2010 after it completes its missions of building the International Space Station and servicing the Hubble Space Telescope. Powering the future of space-based scientific exploration will be the Ares I Crew Launch Vehicle, which will transport the Orion Crew Exploration Vehicle to orbit where it will rendezvous with the Lunar Lander. which will be delivered by the Ares V Cargo Launch Vehicle. This new transportation infrastructure, developed by the National Aeronautics and Space Administration (NASA), will allow astronauts to leave low-Earth orbit for extended lunar exploration and preparation for the first footprint on Mars. All space-based operations begin and are controlled from Earth. NASA's philosophy is to deliver safe, reliable, and cost-effective solutions to sustain a multi-billion-dollar program across several decades. Leveraging 50 years of lessons learned, NASA is partnering with private industry, while building on proven hardware experience. This paper will discuss how the Engineering Directorate at NASA's Marshall Space Flight Center is working with the Ares Projects Office to streamline ground operations concepts and reduce costs. Currently, NASA's budget is around $17 billion, which is less than 1 percent of the U.S. Federal budget. Of this amount, NASA invests approximately $4.5 billion each year in Space Shuttle operations, regardless of whether the spacecraft is flying or not. The affordability requirement is for the Ares I to reduce this expense by 50 percent, in order to allow NASA to invest more in space-based scientific operations. Focusing on this metric, the Engineering Directorate provides several solutions-oriented approaches, including Lean/Six Sigma practices and streamlined hardware testing and integration, such as assembling major hardware elements before shipping to the Kennedy Space Center for launch operations. This paper provides top-level details for several cost saving initiatives, including both process and product improvements that will result in space transportation systems that are designed with operations efficiencies in mind. The Engineering Directorate provides both the intellectual capital embodied in an experienced workforce and unique facilities in which to validate the information technology tools that allow a nationwide team to collaboratively connect across miles that separate them and the engineering disciplines that integrate various piece parts into a whole system. As NASA transforms ground-based operations, it also is transitioning its workforce from an era of intense hands-on labor to a new one of mechanized conveniences and robust hardware with simpler interfaces. Ensuring that space exploration is on sound footing requires that operations efficiencies be designed into the transportation system and implemented in the development stage. Applying experience gained through decades of ground and space op'erations, while using value-added processes and modern business and engineering tools, is the philosophy upon which a new era of exploration will be built to solve some of the most pressing exploration challenges today -- namely, safety, reliability, and affordability.

Dumbacher, Daniel L.↗