SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Radiation emission from circular waveguide aperture imbedded in plane conducting surface solved using variational and iteration methods
Systems analysis research on radar range data revisions, variation of parameters method, and optimization of solar electric propulsion planetary orbiter
Structure dynamic response for motion through homogeneous frozen random load field with spacewise variations, applying analysis method to beam
Standard two-beam interferometer with polarizers in each beam and an analyzer at the recombined focal point provides greater accuracy and higher resolution than any other known method for measuring variation of polarization within a spectral line and in the surrounding continuum.
Finite element method approximations outside variational principle in elasticity problems, examining convergence to exact solution
Results for 12,000 impacts on a wide range of materials were studied to determine the reproducibility of the liquid oxygen impact test method. Standard deviations representing the overall variability of results were in close agreement with the expected values for a binomial process. This indicates that the major source of variability is due to the go - no go nature of the test method and that variations due to sampling and testing operations were not significant.
The author has identified the following significant results. The RMSE of point location achieved with the annotation system on S190A imagery was 100 m and 90 m in the x and y direction, respectively. Potential gains in sampling precision attributable to space derived imagery ranged from 4.9 to 43.3 percent depending on the image type, interpretation method, time of year, and sampling method applied. Seasonal variation was significant. S190A products obtained in September yielded higher gains than those obtained in June. Using 100 primary sample units as a base under simple random sampling, the revenue made available for incorporating space acquired data into the sample design to estimate timber volume was as high as $39,400.00.
The effects of using an approximate state transition matrix in orbit estimation are investigated. The approximate state transition matrix results when higher order geopotential terms in the equations of motion are ignored in the formation of the variational equations. Two methods of orbit estimation are considered: the differential correction procedure (DC) and the extended Kalman filter (EKF). The system used for the study is the Research & Development version of the Goddard Trajectory Determination System. The effects of the approximation are analyzed on a number of orbits. These orbits of various inclinations and semimajor axes. Other parameters studied include geopotential models and DC arc length.
Planetary range data offer the most promising means to test the validity of the Strong Equivalence Principle (SEP). Analytical expressions for the perturbation in the 'range' expected from an SEP violation predicted by the 'variation-of-G' method and by the 'two-times' approach are derived and compared. The dominant term in both expressions is quadratic in time. Analysis of existing range data should allow a determination of the coefficient of this term with a one-standard-deviation uncertainty of about 1 part in 100 billion/yr.
This research project proposed a modified unit commitment that schedules connection and disconnection of generating units in response to load. A modified generation control is also proposed that controls steam units under automatic generation control, fast responding diesels, gas turbines and hydro units under a feedforward control, and wind turbine array output under a closed loop array control. This modified generation control and unit commitment require prediction of trend wind power variation one hour ahead and the prediction of error in this trend wind power prediction one half hour ahead. An improved meter for predicting trend wind speed variation is developed. Methods for accurately simulating the wind array power from a limited number of wind speed prediction records was developed. Finally, two methods for predicting the error in the trend wind power prediction were developed. This research provides a foundation for testing and evaluating the modified unit commitment and generation control that was developed to maintain operating reliability at a greatly reduced overall production cost for utilities with wind generation capacity.
This paper extends recent work providing an elementary calculation of bremsstrahlung and opacity associated with the scattering of low-energy electrons by neutral atoms and molecules. The method applies when the scattering potential is 'hard' or when the collision time is short, applying the classical soft-photon emission probability formula for arbitrary bremsstrahlung photon energy. However, now, in addition to correcting the probability factor for finite bremsstrahlung photon energy, another factor corrects for the reduced phase space available to the outgoing electron. The bremsstrahlung cross section and opacity are then computed directly from the elastic scattering cross section, determined experimentally or calculated; a small (approximately 10 percent) correction is computed from the anisotropic term in the elastic scattering cross section. The opacity is evaluated for electron scattering by H, He, and H2 using experimentally determined values for the elastic scattering cross section, and is compared with more elaborate calculations. The agreement is good (within 10 percent), indicating an accuracy for the general method comparable to variations among the results of different elaborate theoretical computations. The agreement seems to validate the basic approximation of short collision time even at large bremsstrahlung photon energy for electron energies and temperatures up to a few eV.
A method is developed for remote sensing of aerosol absorption from satellite images of the earth's surface. The method is based on the measurement of the change in the upward radiances between a clear and a hazy day over a varying surface reflectance. For a zero change balance between brightening due to scattering and darkening due to absorption and scattering is reached. This balance is utilized via a radiative transfer model to derive the aerosol single-scattering albedo. A sensitivity study is performed, and the method is tested against laboratory measurements. It is suggested that for the case of haze introduced on top of an existing background aerosol and with a fair estimate of the scattering phase function, the error in the remotely sensed single-scattering albedo is in the range of 0.03-0.05. The main errors in the method arise from variations in the surface reflectance between the clear and the hazy days, uncertainty in the scattering phase function, and variation of the aerosol and gaseous absorption between these two days. If the satellite calibration varies with time, the measurements of single-scattering albedo can be substantially affected.
Two techniques were used to validate the theoretical relationship between polar motion and P sub s variations. The first method, reproduced from Hide et al. (1984), compares the fluctuations in physical space of the polar spirals and the high frequencies about them. Although the agreement appears reasonable, the lack of a clear measure of closeness and the presence of the large Chandler signal itself makes a comparison at higher frequencies difficult. To overcome this difficulty, the authors present the X functions required to maintain the observed fluctuations at roughly 20 to 70 days and those calculated from the National Meteorological Center (NMC) P sub s data. These curves are in relatively good agreement, indicating that polar motions are indeed driven, at least in large part, by fluctuations in P sub s.
System for distribution of 100-MHz reference signal features transmission through optical fiber to station 22 km away and stabilization of frequency by radio frequency phase-conjugation method. Compensates for variations in phase (caused mostly by changes in temperature along optical fiber) of signal arriving at remote station. Involves measurement and control of phases of transmitted and reflected signals at reference station to obtain reference phase at remote station.
A formulation is presented for modeling a resistive card in the context of the finite element method. The appropriate variational function is derived and for validation purposes, results are presented for the scattering by a metal-backed cavity loaded with a resistive card.
A formulation is presented for modeling a resistive card in the context of the finite element method. The appropriate variational function is derived and for variational purposes results are presented for the scattering by a metal-backed cavity loaded with a resistive card.
The OspA gene from a North American strain of the Lyme disease Spirochete, Borrelia burgdorferi, was cloned under the control of transciption and translation signals from bacteriophage T7. Full-length OspA protein, a 273 amino acid (31kD) lipoprotein, is expressed poorly in Escherichia coli and is associated with the insoluble membrane fraction. In contrast, a truncated form of OspA lacking the amino-terminal signal sequence which normally would direct localization of the protein to the outer membrane is expressed at very high levels (less than or equal to 100 mg/liter) and is soluble. The truncated protein was purified to homogeneity and is being tested to see if it will be useful as an immunogen in a vaccine against Lyme disease. Circular dichroism and fluorescence spectroscopy was used to characterize the secondary structure and study conformational changes in the protein. Studies underway with other surface proteins from B burgdorferi and a related spirochete, B. hermsii, which causes relapsing fever, leads us to conclude that a strategy similar to that used to express the truncated OspA can provide a facile method for producing variations of Borrelia lipoproteins which are highly expressed in E. coli and soluble without exposure to detergents.
In this research, it is demonstrated that the integration of nondestructive evaluation with the finite element method (a quantitative NDE/FEM approach) can be used for analysis and behavior prediction of advanced materials, such as fiber composites, after processing and during in-service testing. First, stress, strain, and energy data were calculated by the finite element method for square plates with a 10 percent difference in the material properties between specified segments, i.e., between the center and the outside section or between two halves of the plate. This demonstrated the efficiency of the method in predicting variations in the structural behavior based on small material property differences. Then, finite element analyses and actual axial compression tests were performed on a Space Shuttle brake stator made from woven carbon-carbon composites. The material properties used in the numerical modeling of the stator were previously characterized at a large number of points on the component by quantitative NDE-procedures, i.e., ultrasonics and radiography. The results from the experimental compressive loading tests were used to verify the NDE/FEM results. Good agreement was found for most parameters.