Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VELOCITY MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Measuring Fluid Velocities With Glowing Particles

Particle trajectories recorded photographically. Directions and magnitudes of velocities in unsteady liquid flow measured with aid of fluorescent- and phosphorescent-tracing technique. Method accurate and proceeds automatically, requiring minimal labor.

Gharib, M.↗

Preliminary measurements of velocity, density and total temperature fluctuations in compressible subsonic flow

The heat transfer characteristics of a three-wire hot-wire probe operated with a constant temperature anemometer were investigated in the subsonic compressible flow regime. The sensitivity coefficients, with respect to velocity, density and total temperature, were measured and the results were used to calculate the velocity, density, and total temperature fluctuations in the test section of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT). These results were extended to give estimates for fluctuations due to vorticity, sound, and entropy. In addition, attempts were made to determine the major source of disturbances in the 0.3-m TCT.

Stainback, P. C.↗

Measurement of fast-changing low velocities by photonic Doppler velocimetry

Despite the increasing popularity of photonic Doppler velocimetry (PDV) in shock wave experiments, its capability of capturing low particle velocities while changing rapidly is still questionable. The paper discusses the performance of short time Fourier transform (STFT) and continuous wavelet transform (CWT) in processing fringe signals of fast-changing low velocities measured by PDV. Two typical experiments are carried out to evaluate the performance. In the laser shock peening test, the CWT gives a better interpretation to the free surface velocity history, where the elastic precursor, main plastic wave, and elastic release wave can be clearly identified. The velocities of stress waves, Hugoniot elastic limit, and the amplitude of shock pressure induced by laser can be obtained from the measurement. In the Kolsky-bar based tests, both methods show validity of processing the longitudinal velocity signal of incident bar, whereas CWT improperly interprets the radial velocity of the shocked sample at the beginning period, indicating the sensitiveness of the CWT to the background noise. STFT is relatively robust in extracting waveforms of low signal-to-noise ratio. Data processing method greatly affects the temporal resolution and velocity resolution of a given fringe signal, usually CWT demonstrates a better local temporal resolution and velocity resolution, due to its adaptability to the local frequency, also due to the finer time-frequency product according to the uncertainty principle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of solar filaments. VI - Center-to-limb study of H-alpha and C IV velocities in a quiescent filament

The rotation of a stable quiescent filament from near disk center to the limb has been observed. Observations of intensity and velocity were made in H-alpha and C IV, and compared with magnetic field measurements. From the H-alpha observations, it is concluded that the filament is made up of many small scale magnetic features that are not coherently aligned along the neutral line. They are especially convoluted at the apparent 'footpoints'. The measured velocities are of the order of a few kilometers per second in both lines. However, the comparison of the standard deviations of the C IV velocities in and out of the filament as it rotates toward the limb shows that the vertical velocities in the filament are greater than the horizontal velocities. Measurements of velocity do not make it possible to distinguish between the Raadu-Kuperus (1973) or Kippenhahn-Schluter (1957) models for prominences because neither theory is adequately developed for this comparison. However, the observation of the many fine loops brings into question the correctness of either model.

Simon, G.↗

Assessing state-of-the-art capabilities for probing the atmospheric boundary layer: The XPIA field campaign

To assess current capabilities for measuring flow within the atmospheric boundary layer, including within wind farms, the U.S. Dept. of Energy sponsored the eXperimental Planetary boundary layer Instrumentation Assessment (XPIA) campaign at the Boulder Atmospheric Observatory (BAO) in spring 2015. Herein, we summarize the XPIA field experiment, highlight novel measurement approaches, and quantify uncertainties associated with these measurement methods. Line-of-sight velocities measured by scanning lidars and radars exhibit close agreement with tower measurements, despite differences in measurement volumes. Virtual towers of wind measurements, from multiple lidars or radars, also agree well with tower and profiling lidar measurements. Estimates of winds over volumes from scanning lidars and radars are in close agreement, enabling assessment of spatial variability. Strengths of the radar systems used here include high scan rates, large domain coverage, and availability during most precipitation events, but they struggle at times to provide data during periods with limited atmospheric scatterers. In contrast, for the deployment geometry tested here, the lidars have slower scan rates and less range, but provide more data during non-precipitating atmospheric conditions. Microwave radiometers provide temperature profiles with approximately the same uncertainty as Radio-Acoustic Sounding Systems (RASS). Using a motion platform, we assess motion-compensation algorithms for lidars to be mounted on offshore platforms. As a result, we highlight cases for validation of mesoscale or large-eddy simulations, providing information on accessing the archived dataset. We conclude that modern remote sensing systems provide a generational improvement in observational capabilities, enabling resolution of fine-scale processes critical to understanding inhomogeneous boundary-layer flows.

17 WIND ENERGY↗

A Study of the Effect of Errors in Measurement of Velocity and Flight-Path Angle on the Guidance of a Space Vehicle Approaching the Earth

An analysis was made of the guidance of a space vehicle approaching the earth at supercircular velocity through an entrance corridor containing a desired perigee altitude. Random errors were assumed in the measurement of velocity and flight-path angle and in obtaining the desired thrust impulse. The method described in NASA Technical Note D-191 of scheduling corrections at different values of the angle between perigee and the vehicle's position vector and a slight modification of this method were investigated as a means of correcting perigee altitude when the vehicle's predicted position was at programmed correction points not within a specified deadband about the desired perigee altitude. The study showed that modifying the angular method of NASA Technical Note D-191 by adding another correction near the initial point did not improve the efficiency and accuracy of the angular method. It was found that in some cases the use of a correction procedure which included a deadband could be more costly in total corrective velocity than a procedure which neglected the deadband. This was especially true if a large degree of confidence was required in the total corrective velocity. It was apparent from the results that a correction with a deadband limit in the guidance scheme was more sensitive to the initial conditions, the corrective procedure, the deadband, and the degree of confidence required than a correction without a deadband limit.

White, Jack A.↗

A technique for measuring hypersonic flow velocity profiles

A technique for measuring hypersonic flow velocity profiles is described. This technique utilizes an arc-discharge-electron-beam system to produce a luminous disturbance in the flow. The time of flight of this disturbance was measured. Experimental tests were conducted in the Langley pilot model expansion tube. The measured velocities were of the order of 6000 m/sec over a free-stream density range from 0.000196 to 0.00186 kg/cu m. The fractional error in the velocity measurements was less than 5 percent. Long arc discharge columns (0.356 m) were generated under hypersonic flow conditions in the expansion-tube modified to operate as an expansion tunnel.

Gartrell, L. R.↗

Simultaneous concentration and velocity field measurements in a shock-accelerated mixing layer

Here, a novel technique to obtain simultaneous velocity and concentration measurements is applied to the Richtmyer–Meshkov instability. After acceleration by a Mach 2.2 shock wave, the interface between the two gases develops into a turbulent mixing layer. A time-separated pair of acetone planar laser-induced fluorescence images are processed to yield concentration and, through application of the Advection-Corrected Correlation Image Velocimetry technique, velocity fields. This is the first application of this technique to shock-accelerated flows. We show that when applied to numerical simulations, this technique reproduces the velocity field to a similar quality as particle image velocimetry. When applied to the turbulent mixing layer of the experiments, information about the Reynolds number and anisotropy of the flow is obtained.

42 ENGINEERING↗

Bayesian mass estimates of the milky way: including measurement uncertainties with hierarchical bayes

We present a hierarchical Bayesian method for estimating the total mass and mass profile of the Milky Way Galaxy. The new hierarchical Bayesian approach further improves the framework presented by Eadie et al. and Eadie and Harris and builds upon the preliminary reports by Eadie et al. The method uses a distribution function f(E,L) to model the Galaxy and kinematic data from satellite objects, such as globular clusters (GCs), to trace the Galaxy’s gravitational potential. A major advantage of the method is that it not only includes complete and incomplete data simultaneously in the analysis, but also incorporates measurement uncertainties in a coherent and meaningful way. We first test the hierarchical Bayesian framework, which includes measurement uncertainties, using the same data and power-law model assumed in Eadie and Harris and find the results are similar but more strongly constrained. Next, we take advantage of the new statistical framework and incorporate all possible GC data, finding a cumulative mass profile with Bayesian credible regions. This profile implies a mass within 125 kpc of 4.8×10{sup 11}M{sub ⊙} with a 95% Bayesian credible region of (4.0--5.8)×10{sup 11}M{sub ⊙}. Our results also provide estimates of the true specific energies of all the GCs. By comparing these estimated energies to the measured energies of GCs with complete velocity measurements, we observe that (the few) remote tracers with complete measurements may play a large role in determining a total mass estimate of the Galaxy. Thus, our study stresses the need for more remote tracers with complete velocity measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Investigation of Base Pressure on Blunt-Trailing-Edge Wings at Supersonic Velocities

Measurements of base pressure are presented for 29 blunt-trailing-edge wings having an aspect ratio of 3.0 and various airfoil profiles. The different profiles comprised thickness ratios between 0.05 and 0.10, boattail angles between -2.9 degrees and 20 degrees, and ratios of trailing-edge thickness to airfoil thickness between 0.2 and 1.0. The tests were conducted at Mach numbers of 1.25, 1.5, 2.0, and 3.1. For each Mach number, the Reynolds number and angle of attack were varied. The lowest Reynolds number investigated was 0.2 x 10(6) and the highest was 3.5 x 10(6). Measurements on each wing were obtained separately with turbulent flow and laminar flow in the boundary layer. Span-wise surveys of the base pressure were conducted on several wings. The results with turbulent boundary-layer flow showed only small effects on base pressure of variations in Reynolds number, airfoil profile shape, boattail angle, and angle of attack. The principal variable affecting the base pressure for turbulent flow was the Mach number.

Chapman, Dean R↗

Wind velocity profiles measured by the smoke-trail method at Wallops Island, Virginia, 1965 - 1969

Thirty-nine detailed wind profiles measured by the smoke-trail method at the Wallops Island Test Range during the years 1965 through 1969 are presented as west-to-east and south-to-north velocity components at height intervals of 25 meters. The overall altitude range of the wind profile data varies from about 1 to 23 km. The wind measurements, which were made under a variety of conditions, include velocities in excess of the annual 99-percent highest wind value (the wind value which will not be exceeded 99 percent of the time) for the Wallops Island Test Range. The report also includes a listing of the wind soundings and their maximum velocities and direction of the maximum velocities measured at Wallops Island from 1959 through 1969. Results of smoke-trail enhancement experiments are also indicated.

Rhyne, R. H.↗

Wind velocity profiles measured by the smoke-trail method at the Eastern Test Range, 1964

Twenty-six detailed wind profiles measured by the smoke trail technique at the Eastern Test Range during the first seven months of 1964 are presented as plots of west-to-east and south-to-north velocity components at height intervals of 25 meters. The overall altitude ranges of the profiles vary from about 2.6 to 19.1 km. The wind measurements, which were made under a variety of conditions, include velocities in excess of the 90- and 95-percent highest values for the Eastern Test Range. The report also includes a listing of the wind profiles, their maximum velocities and direction of the maximum velocities, measured by the smoke trail method at the Eastern Test Range from 1962 to 1964.

Manning, J. C.↗

THE VELOCITY DISTRIBUTION OF NEARBY STARS FROM HIPPARCOS DATA. I. THE SIGNIFICANCE OF THE MOVING GROUPS

We present a three-dimensional reconstruction of the velocity distribution of nearby stars ({approx}<100 pc) using a maximum likelihood density estimation technique applied to the two-dimensional tangential velocities of stars. The underlying distribution is modeled as a mixture of Gaussian components. The algorithm reconstructs the error-deconvolved distribution function, even when the individual stars have unique error and missing-data properties. We apply this technique to the tangential velocity measurements from a kinematically unbiased sample of 11,865 main-sequence stars observed by the Hipparcos satellite. We explore various methods for validating the complexity of the resulting velocity distribution function, including criteria based on Bayesian model selection and how accurately our reconstruction predicts the radial velocities of a sample of stars from the Geneva-Copenhagen Survey (GCS). Using this very conservative external validation test based on the GCS, we find that there is little evidence for structure in the distribution function beyond the moving groups established prior to the Hipparcos mission. This is in sharp contrast with internal tests performed here and in previous analyses, which point consistently to maximal structure in the velocity distribution. We quantify the information content of the radial velocity measurements and find that the mean amount of new information gained from a radial velocity measurement of a single star is significant. This argues for complementary radial velocity surveys to upcoming astrometric surveys.

99 GENERAL AND MISCELLANEOUS↗

Computed versus measured ion velocity distribution functions in a Hall effect thruster

We compare time-averaged and time-varying measured and computed ion velocity distribution functions in a Hall effect thruster for typical operating conditions. The ion properties are measured by means of laser induced fluorescence spectroscopy. Simulations of the plasma properties are performed with a two-dimensional hybrid model. In the electron fluid description of the hybrid model, the anomalous transport responsible for the electron diffusion across the magnetic field barrier is deduced from the experimental profile of the time-averaged electric field. The use of a steady state anomalous mobility profile allows the hybrid model to capture some properties like the time-averaged ion mean velocity. Yet, the model fails at reproducing the time evolution of the ion velocity. This fact reveals a complex underlying physics that necessitates to account for the electron dynamics over a short time-scale. This study also shows the necessity for electron temperature measurements. Moreover, the strength of the self-magnetic field due to the rotating Hall current is found negligible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Instantaneous velocity field measurements of a turbulent rectangular jet (AR-4) using particle image displacement velocimetry

A whole field experimental technique, commonly referred to as Particle Image Displacement Velocimetry (PIDV) is used for the measurement of the two dimensional instantaneous velocity fields in the transition region of a three dimensional jet issuing from a rectangular nozzle of an aspect ratio 4. The instability process of an initially laminar jet is studied visually and quantitatively to determine the structure and growth of the mixing region of the jet. The experiments were performed using an air jet at a Reynolds number based on the hydraulic diameter of 3600. The roll-up of the laminar shear layer into vortices and their subsequent interactions are examined.

Lourenco, L.↗

FLEET and PLIF Velocimetry Within A Mach 10 Hypersonic Air Flow

Femtosecond laser electronic excitation tagging (FLEET) and planar laser-induced fluorescence (PLIF) velocity measurements utilizing molecular tagging velocity (MTV) methods from three recent test campaigns conducted at the 31-in Mach 10 Air Tunnel at the NASA Langley Research Center are highlighted within. The FLEET measurements reported here include the first direct measurement of freestream velocity at this hypersonic wind tunnel facility. Measurement challenges were exasperated by the low gas density of the Mach 10 air freestream (~0.4% of standard temperature and pressure conditions) and even lower gas densities within the hypersonic wake of a 70-degree sphere-cone model. In addition, the hypersonic freestream and very low speed velocities in the wake also tested the measurement dynamic range. To complement the FLEET measurements in the wake of the sphere-cone model, PLIF velocimetry using seeded nitric oxide was also performed. While NO-PLIF velocimetry has been performed at this facility several times by previous researchers, the use of a 1D diffractive optical element for NO-PLIF velocimetry is reported here for the first time. The 1D DOE enabled the generation of up to 75 laser lines simultaneously and improved the spatial extent of the measurement three times compared to previous work. This enabled a wide velocity measurement plane of approximately 130 mm x 130 mm. The velocimetry methods demonstrated here are expected to improve wind tunnel characterization, provide critical data to validate CFD codes, and improve the design of flight vehicles for planetary entry.

FLEET↗

FLEET and PLIF Velocimetry Within A Mach 10 Hypersonic Air Flow

Femtosecond laser electronic excitation tagging (FLEET) and planar laser-induced fluorescence (PLIF) velocity measurements utilizing molecular tagging velocity (MTV) methods from three recent test campaigns conducted at the 31-in Mach 10 Air Tunnel at the NASA Langley Research Center are highlighted within. The FLEET measurements reported here include the first direct measurement of freestream velocity at this hypersonic wind tunnel facility. Measurement challenges were exasperated by the low gas density of the Mach 10 air freestream (~0.4% of standard temperature and pressure conditions) and even lower gas densities within the hypersonic wake of a 70-degree sphere-cone model. In addition, the hypersonic freestream and very low speed velocities in the wake also tested the measurement dynamic range. To complement the FLEET measurements in the wake of the sphere-cone model, PLIF velocimetry using seeded nitric oxide was also performed. While NO-PLIF velocimetry has been performed at this facility several times by previous researchers, the use of a 1D diffractive optical element for NO-PLIF velocimetry is reported here for the first time. The 1D DOE enabled the generation of up to 75 laser lines simultaneously and improved the spatial extent of the measurement three times compared to previous work. This enabled a wide velocity measurement plane of approximately 130 mm x 130 mm. The velocimetry methods demonstrated here are expected to improve wind tunnel characterization, provide critical data to validate CFD codes, and improve the design of flight vehicles for planetary entry.

FLEET↗

Laser anemometer using a Fabry-Perot interferometer for measuring mean velocity and turbulence intensity along the optical axis in turbomachinery

A technique for measuring a small optical axis velocity component in a flow with a large transverse velocity component is presented. Experimental results are given for a subsonic free jet operating in a laboratory environment, and for a 0.508 meter diameter turbine stator cascade. Satisfactory operation of the instrument was demonstrated in the stator cascade facility with an ambient acoustic noise level during operation of about 105 dB. In addition, the turbulence intensity measured with the interferometer was consistent with previous measurements taken with a fringe type laser anemometer.

Seasholtz, R. G.↗