Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

LANDSAT instruments characterization

Work performed for the LANDSAT instrument characterization task in the areas of absolute radiometry, coherent noise analysis, and between-date smoothing is reported. Absolute radiometric calibration for LANDSAT-5 TM under ambient conditions was performed. The TM Radiometric Algorithms and Performance Program (TRAPP) was modified to create optional midscan data files and to match the TM Image Processing System (TIPS) algorithm for pulse determination. Several data reduction programs were developed, including a linear regression and its plotted result. A fast Fourier transformation study was conducted on the resequenced TM data. Subscenes of homogeneous water within scenes over Pensacola, Florida were used for testing the FFT on the resequenced data. Finally, a gain and pulse height stability study of LANDSAT 5 TM spectral bands was performed.

Lee, Y.↗
NASA NTRS1985

Thematic Mapper Spectral Dimensionality and Data Structure

A simulated LANDSAT 4 TM and MSS data set, representing three crops over three growing seasons and a wide variety of soil types, was used to evaluate the structure of TM data and to compare its characteristics to those of MSS data. TM bands 2, 3, and 4, transformed to tasseled cap-like coordinates, provide an equivalent data space to MSS tasseled cap data, with greater dynamic range and no apparent loss of information resulting from the exclusion of the 0.9 to 1.1 micron region. Data from the six reflective TM bands (excluding the thermal band) primarily occupy two planes and a transition zone between them. The plane of vegetation is comparable to the MSS tasseled cap plane, while the plane of soils and transition zone provide a new dimension of information unavailable from the MSS. This added dimension offers promise of improved ability to determine the relative mix of vegetation and soil in the sensor field of view and to estimate soil moisture status. The improvement in spectral characteristics of the TM over the MSS, not to mention the greater spatial resolution, have resulted in a significant increase in the information content of the data.

Crist, E. P.↗
NASA NTRS1985

An Analysis of the High Frequency Vibrations in Early Thematic Mapper Scenes

The motion of the mirrors in the thematic mapper (TM) and multispectral scanner (MSS) instruments, and the motion of other devices, such as the TDRSS antenna drive, and solar array drives onboard LANDSAT-4 cause vibrations to propagate through the spacecraft. These vibrations as well as nonlinearities in the scanning motion of the TM mirror can cause the TM detectors to point away from their nominal positions. Two computer programs, JITTER and SCDFT, were developed as part of the LANDSAT-D Assessment System (LAS), Products and Procedures Analysis (PAPA) program to evaluate the potential effect of high frequency vibrations on the final TM image. The maximum overlap and underlap which were observed for early TM scenes are well within specifications for the ground processing system. The cross scan and scan high frequency vibrations are also within the specifications cited for the flight system.

Kogut, J.↗
NASA NTRS1985

Early Results of Investigations of LANDSAT 4 Thematic Mapper and Multispectral Scanner Applications

The TM digital data were evaluated for their potential to provide improved land cover information. The analyses included: (1) testing for information that may be offered by the new TM spectral bands, and (2) comparing data characteristics for equivalent spectral bands of the TM and MSS sensors. The analyses were conducted on several large samples of pixels corresponding to five broad land cover classes. Some TM spectral data are presented and evaluated as single-band, black-and-white images, and in several three-band color-composite images. Some data transformations which can be used to present TM data in a manner that is potentially more useful for analysis or display are demonstrated. These transformations enable generating hue, intensity, and saturation data space from red, green, and blue color space, as well as perspective view images.

Sadowski, F. G.↗
NASA NTRS1984

Registering Thematic Mapper imagery to digital elevation models

The problems encountered when attempting to register Landsat Thematic Mapper (TM) data to U.S. geological survey digital elevation models (DEMs) are examined. It is shown that TM and DEM data are not available in the same map projection, necessitating geometric transformation of one of the data type, that the TM data are not accurately located in their nominal projection, and that TM data have higher resolution than most DEM data, but oversampling the DEM data to TM resolution introduces systematic noise. Further work needed in this area is discussed.

Frew, J.↗
NASA NTRS1985

Comparative evaluations of the geodetic accuracy and cartographic potential of Landsat-4 and Landsat-5 Thematic Mapper image data

A Landsat Image Data Quality Analysis (LIDQA) Program is conducted by NASA. One part of this program forms studies which are being performed with the objective to evaluate the geometric fidelity of Landsat-4 and Landsat-5 Thematic Mapper (TM) data in computer tape (CCT-pt) formats. It is pointed out that the Landsat-4 and Landsat-5 systems provide image data of significantly better geometric fidelity than were obtained from the earlier Landsat missions. Attention is given to the factors which influence the geometric fidelity of the Landsat TM data, the study areas and data sets, the rectification procedures, the rectification of Landsat-4 TM data and comparisons of the Scrounge and the TM Image Processing System (TIPS), the rectification of system and scene corrected Landsat-5 data processed on TIPS, and the cartographic potential of TM data.

Welch, R.↗
NASA NTRS1985

Interpretation of Landsat-4 Thematic Mapper and Multispectral Scanner data for forest surveys

Landsat-4 Thematic Mapper (TM) and Multispectral Scanner (MSS) data were evaluated by interpreting film and digital products and statistical data for selected forest cover types in California. Significant results were: (1) TM color image products should contain a spectral band in the visible (bands 1, 2, or 3), near infrared (band 4), and middle infrared (band 5) regions for maximizing the interpretability of vegetation types; (2) TM color composites should contain band 4 in all cases even at the expense of excluding band 5; and (3) MSS color composites were more interpretable than all TM color composites for certain cover types and for all cover types when band 4 was excluded from the TM composite.

Benson, A. S.↗
NASA NTRS1985

Landsat Thematic Mapper image-derived MTF

The Landsat Image Data Quality Analysis (LIDQA) Program conducted by NASA has the objective to quantify the performance of the Thematic Mapper (TM) on the Landsat-4 and Landsat-5 spacecraft. The interest in the spatial resolution performance of the TM is partly related to the decrease of the instantaneous field of view (IFOV) from 80 m for the MSS to 30 m for the TM. Studies related to the preflight line spread function (LSF), square wave response (SWR), and theoretical component modeling of the TM system modulation transfer function (MTF) have been conducted. However, the need remains to estimate the MTF of the complete system. The present paper is concerned with investigations related to this task. Attention is given to three approaches for measuring the MTF of the TM system from imagery.

Schowengerdt, R. A.↗
NASA NTRS1985

Performance evaluation and geologic utility of LANDSAT-4 thematic mapper data

The overall objective of the project was to evaluate LANDSAT-4 Thematic Mapper (TM) data in the context of geologic applications. This involved a quantitative assessment of the data quality including the spatial and spectral characteristics realized by the instrument. Three test sites were selected for the study: (1) Silver Bell, Arizona; (2) Death Valley, California; and (3) Wind River/Bighorn Basin area, Wyoming. Conclusions include: (1) Artificial and natural targets can be used to atmospherically calibrate TM data and investigate scanner radiometry, atmospheric parameters, and construction of atmospheric Modulation Transfer Functions (MTF's), (2) No significant radiometric degradation occurs in TM data as a result of SCROUNGE processing; however, the data exhibit narrow digital number (DN) distributiosn suggesting that the configuration of the instrument is not optimal for each science applications, (30 Increased spatial resolution, 1:24,000 enlargement capability, and good geometric fidelity of TM data allow accurate photogeologic/geomorphic mapping, including relative age dating of alluvial fans, measurement of structural and bedding attitudes, and construction of such things as structural cross sections and stratigraphic columns. (4) TM bands 5 and 7 are particularly useful for geologic applications because they span a region of the spectrum not previously sampled by multispectral scanner data and are important for characterizing clay and carbonate materials.

Paylor, E. D.↗
NASA NTRS1984

Landsat - An unmanned space platform

Landsats 4 and 5, the latest in the series of unmanned earth observation satellites, are used as the space platform for two remote sensing, mechanical scanning instruments: the multispectral scanner (MSS) and the recently developed thematic mapper (TM). The primary objective of the experimental portion of the Landsat 4 and 5 missions is to assess the capability of the TM to provide improved information relative to the MSS.The higher spatial resolution of the TM over the MSS requires a higher degree of flight segment attitude stability than the earlier Landsats; therefore, a more stable, low-orbit space platform must be provided. This paper describes the orbital, electrical, mechanical, and thermal characteristics of Landsat 4 and 5 flight segment with special emphasis on the TM and MSS interfaces. Also described are flight segment disturbances caused by the TM and MSS scanning mirrors, motion from the Tracking and Data Relay Satellite (TDRS) antenna, solar array, and the attitude control system (ACS).

Schulman, J. R.↗
NASA NTRS1985

Geometric correction of Landsat 4 and 5 Thematic Mapper data

Landsat-4 was launched on July 16, 1982, while the launch of Landsat-5 took place on March 1, 1984. The earth-observing instruments employed were the Multispectral Scanner (MSS), which has flown since 1972 on Landsat satellites, and the Thematic Mapper (TM). The TM provides improved spatial radiance and spectral resolution. The improved capabilities of the TM, the use of different scanning mechanisms relative to the MSS, and the use of a new spacecraft with different mechanical operating characteristics led to a significant challenge in processing the TM and MSS data. The current paper has mainly the objective to present recent results which can provide information regarding the quality of processing as measured against specifications. The results obtained so far for the Thematic Mapper Image Processing System (TIPS), though limited, are found to be quite encouraging as far as the geometric processing of the TM is concerned.

Beyer, E. P.↗
NASA NTRS1985

Operational MTF for Landsat Thematic Mapper

The Landsat Thematic Mapper (TM) represents significant improvements in spatial, spectral, and radiometric resolution over the older Multispectral Scanner System (MSS). For the last three years, NASA has conducted the Landsat Image Data Quality Analysis (LIDQA) program to quantify the performance of the TM on the Landsat-4 and 5 spacecraft. As part of this program, analysis of the TM imagery to extract the overall system modulation transfer function (MTF) has been performed. In this paper, the San Mateo Bridge in San Francisco is described as a target for calculation of the line spread function and MTF. The analysis of two TM scenes, one from 12/31/82 and one from 8/12/83, yielded effective-instantaneous-field-of-views (EIFOVs) of 40.8 meters and 48.6 meters, respectively. These values are compared with the 33.8 meter EIFOV predicted by component modelling of the TM sensor, and the differences discussed.

Schowengerdt, R.↗
NASA NTRS1986

Landsat D Thematic Mapper image dimensionality reduction and geometric correction accuracy

To characterize and quantify the performance of the Landsat thematic mapper (TM), techniques for dimensionality reduction by linear transformation have been studied and evaluated and the accuracy of the correction of geometric errors in TM images analyzed. Theoretical evaluations and comparisons for existing methods for the design of linear transformation for dimensionality reduction are presented. These methods include the discrete Karhunen Loeve (KL) expansion, Multiple Discriminant Analysis (MDA), Thematic Mapper (TM)-Tasseled Cap Linear Transformation and Singular Value Decomposition (SVD). A unified approach to these design problems is presented in which each method involves optimizing an objective function with respect to the linear transformation matrix. From these studies, four modified methods are proposed. They are referred to as the Space Variant Linear Transformation, the KL Transform-MDA hybrid method, and the First and Second Version of the Weighted MDA method. The modifications involve the assignment of weights to classes to achieve improvements in the class conditional probability of error for classes with high weights. Experimental evaluations of the existing and proposed methods have been performed using the six reflective bands of the TM data. It is shown that in terms of probability of classification error and the percentage of the cumulative eigenvalues, the six reflective bands of the TM data require only a three dimensional feature space. It is shown experimentally as well that for the proposed methods, the classes with high weights have improvements in class conditional probability of error estimates as expected.

Ford, G. E.↗
NASA NTRS1986

Interpreting forest and grassland biome productivity utilizing nested scales of image resolution and biogeographical analysis

Data acquisition, initial site characterization, image and geographic information methods available, and brief evaluations of first-year for NASA's Thematic Mapper (TM) working group are presented. The TM and other spectral data are examined in order to relate local, intensive ecosystem research findings to estimates of carbon cycling rates over wide geographic regions. The effort is to span environments ranging from dry to moist climates and from good to poor site quality using the TM capability, with and without the inclusion of geographic information system (GIS) data, and thus to interpret the local spatial pattern of factors conditioning biomass or productivity. Twenty-eight TM data sets were acquired, archived, and evaluated. The ERDAS image processing and GIS system were installed on the microcomputer (PC-AT) and its capabilities are being investigated. The TM coverage of seven study areas were exported via ELAS software on the Prime to the ERDAS system. Statistical analysis procedures to be used on the spectral data are being identified.

Iverson, L. R.↗
NASA NTRS1987

Utilizing remote sensing of thematic mapper data to improve our understanding of estuarine processes and their influence on the productivity of estuarine-dependent fisheries

A stochastic spatial computer model addressing coastal resource problems in Lousiana is being refined and validated using thematic mapper (TM) imagery. The TM images of brackish marsh sites were processed and data were tabulated on spatial parameters from TM images of the salt marsh sites. The Fisheries Image Processing Systems (FIPS) was used to analyze the TM scene. Activities were concentrated on improving the structure of the model and developing a structure and methodology for calibrating the model with spatial-pattern data from the TM imagery.

Browder, Joan A.↗
NASA NTRS1987

Using the Landsat Thematic Mapper to detect and monitor active volcanoes - An example from Lascar volcano, northern Chile

The Landsat Thematic Mapper (TM) offers a means of detecting and monitoring thermal features of active volcanoes. Using the TM, a prominent thermal anomaly has been discovered on Lascar volcano, northern Chile. Data from two short-wavelength infrared channels of the TM show that material within a 300-m-diameter pit crater was at a temperature of at least 380 C on two dates in 1985. The thermal anomaly closely resembles in size and radiant temperature the anomaly over the active lava lake at Erta'ale in Ethiopia. An eruption took place at Lascar on Sept. 16, 1986. TM data acquired on Oct. 27, 1986, revealed significant changes within the crater area. Lascar is in a much more active state than any other volcano in the central Andes, and for this reason it merits further careful monitoring. Studies show that the TM is capable of confidently identifying thermal anomalies less than 100 m in size, at temperatures of above 150 C, and thus it offers a valuable means of monitoring the conditions of active or potentially active volcanoes, particularly those in remote regions.

Francis, P. W.↗
NASA NTRS1989

Development of mid-infrared solid state lasers for spaceborne lidar

Laser performance of Ho(3+):Tm(3+):Cr(3+):YAG crystals was investigated under both Cr:GSAG laser and flashlamp pumping. A flashlamp pumped Cr:GSAG laser was built to simulate high power quasi-CW laser diode pumping of a 2.1 micrometer holmium laser. The 2.1 micrometer output laser energy exceeded more than 14 mJ, the highest value reported to date under laser pumping near 785 nm. This was obtained in a pulse length of nearly 650 microsec from a 3 x 3 mm Ho:Tm:Cr:YAG rod by using the flashlamp-pumped Cr:CSAG laser as a pumping source at the diode laser wavelength, 785 micrometers. In addition, Ho:Tm:Cr:YAG crystals with various Tm(3+) concentrations were evaluated for flashlamp-pumped normal mode and Q-switched 2.1 micrometer laser operations under a wide variety of experimental conditions in order to understand internal dynamic processes among the ions and to determine an optimum lasing condition. An increase of the laser slope efficiency was observed with the increase of the Tm(3+) concentration from 2.5 to 4.5 atomic percent. The thermal dependence of the laser performance was also investigated. Q-switched laser output energies corresponding to nearly 100 percent of the normal-mode laser energies were obtained in a strong single spike of 200 ns pulse length by optimizing the opening time of a lithium niobate Q-switch.

Whitney, Donald A.↗
NASA NTRS1990

Development of mid-infrared solid state lasers for spaceborne lidar

Researchers investigated laser performance of Ho(3+):Tm(3+):Cr(3+):YAG crystals under both Cr:GSAG laser and flashlamp pumping. A flashlamp pumped Cr:GSAG laser was built to simulate high power quasi-CW laser diode pumping of a 2.1 micron holmium laser. The 2.1 micron output laser energy exceeded more than 14 mJ, the highest value reported to date under laser pumping near 785 nm. This was obtained in a pulse length of nearly 650 microns from a 3 x 3 mm Ho:Tm:Cr:YAG rod by using the flashlamp-pumped Cr:GSAG laser as a pumping source at the diode laser wavelength, 785 microns. In addition, Ho:Tm:Cr:YAG crystals with various Tm(3+) concentrations have been evaluated for flashlamp-pumped normal mode and Q-switched 2.1 micron laser operations under a wide variety of experimental conditions in order to understand internal dynamic processes among the ions and to determine an optimum lasing condition. An increase of the laser slope efficiency was observed with the increase of the Tm(3+) concentration from 2.5 atomic percent to 4.5 atomic percent. The thermal dependence of the laser performance was also investigated. Q-switched laser output energies corresponding to nearly 100 percent of the normal-mode laser energies were obtained in a strong single spike of 200 ns pulse length by optimizing the opening time of a lithium niobate Q-switch.

Whitney, Donald A.↗