Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interplay Between Stereochemically Active Lone Pair Repulsions, Sigma Hole Interactions, and Delocalized Redox Processes in Topochemical Fluoride‐Ion Insertion

Topochemical insertion/extraction of cations has emerged as a generalizable strategy for modulating the crystal and electronic structure of periodic solids. In contrast, strategies for topochemical anion insertion are poorly explored and fundamental principles for designing insertion hosts to accommodate anions remain scarce. Here, we observe reversible room-temperature fluoride-ion insertion within tunnels of Sn 2 TiO 4 defined by the stereochemical expression of Sn 5 s 2 lone pairs. X-ray scattering studies of fluoride-ion-insertion-induced crystal structure modulation and X-ray absorption/emission spectroscopy probes of electronic structure along with magnetic susceptibility measurements and first-principles calculations are used to decipher design principles underpinning reversible fluoride-ion insertion and bulk diffusion. Fluoride-ion insertion is enabled by a combination of a large, polarizable tunnel, delocalized redox at Ti─O─Sn centers, inherent repulsion between the fluoride-ion and Sn 5 s 2 electron lone pairs, and the formation of dative interactions between Sn-centered σ-holes and fluoride-ions, yielding a reversible capacity of 0.5 fluoride-ions per Sn 2 TiO 4 formula unit. Our results demonstrate that the complex interplay between dative interactions and stereochemically active lone pair repulsions is critical to defining the thermodynamics and kinetics controlling fluoride-ion insertion and diffusion. As such, the design of fluoride-ion insertion hosts for anion batteries requires site-selective modification to modulate lattice—ion interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hybrid Carbon Dioxide Reduction Photocatalysts Consisting of Macrocyclic Cobalt(III) Complexes Deposited on Semiconductor Surfaces

Hybrid photocatalysts can be prepared by coupling metal ligand complexes with light-harvesting semiconductors. It is often challenging and time consuming to derivatize ligands with anchoring groups to effectively attach onto surfaces. In this study, we synthesized hybrid carbon dioxide reduction photocatalysts by directly depositing two macrocyclic Co(III) complexes on three different semiconductor surfaces (TiO 2 , N-Ta 2 O 5 and C 3 N 4 ). The resulting hybrid photocatalysts were characterized with various techniques and tested in CO 2 reduction reactions under different light conditions. Excellent visible-light CO 2 -reduction activity was obtained using C 3 N 4 as the light-harvesting semiconductor. Furthermore, density functional theory calculations were conducted to help understand interactions between the cobalt complexes with a model TiO 2 surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Screening and Discovery of Metal Compound Active Sites for Strong and Selective Adsorption of N 2 in Air

Photocatalytic nitrogen fixation has the potential to provide a greener route for producing nitrogen-based fertilizers under ambient conditions. Computational screening is a promising route to discover new materials for the nitrogen fixation process, but requires identifying “descriptors” that can be efficiently computed. In this work, we argue that selectivity toward the adsorption of molecular nitrogen and oxygen can act as a key descriptor. A catalyst that can selectively adsorb nitrogen and resist poisoning of oxygen and other molecules present in air has the potential to facilitate the nitrogen fixation process under ambient conditions. Here we provide a framework for active site screening based on multifidelity density functional theory (DFT) calculations for a range of metal oxides, oxyborides, and oxyphosphides. The screening methodology consists of initial low-fidelity fixed geometry calculations and a second screening in which more expensive geometry optimizations were performed. The approach identifies promising active sites on several TiO 2 polymorph surfaces and a VBO 4 surface, and the full nitrogen reduction pathway is studied with the BEEF-vdW and HSE06 functionals on two active sites. The findings suggest that metastable TiO 2 polymorphs may play a role in photocatalytic nitrogen fixation, and that VBO 4 may be an interesting material for further studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomically Precise Nanoclusters as Co‐Catalysts for Light‐Activated Microswimmer Motility

Microswimmers are self-propelled particles that navigate fluid environments, offering significant potential for applications in environmental pollutant decomposition, biosensing, and targeted drug delivery. Their performance relies on engineered catalytic surfaces. Gold nanoclusters (AuNCs), with atomically precise structures, tunable optical properties, and high surface area-to-volume ratio, provide a new optimal catalyst for enhancing microswimmer propulsion. Unlike bulk gold or nanoparticles, AuNCs may deliver tunable photocatalytic activity and increased catalytic specificity, making them ideal co-catalysts for hybrid microswimmers. For the first time, this study combines AuNCs with TiO 2 /Cr 2 O 3 Janus microswimmers, combining the unique properties of both materials. This hybrid system capitalizes on the tuned optical properties of AuNCs and their role as co-catalysts with TiO 2 , driving enhanced photocatalytic performance under ultraviolet (UV) excitation. Using motion analysis, it is shown that the AuNC-microswimmers exhibit significantly greater propulsion and mean squared displacement (MSD) as compared to controls. These findings suggest that the integration of nanoclusters with semiconductor materials enables state of the art, light-switchable microswimmers. These AuNC-microswimmer systems may thus offer new opportunities for environmental catalysis and other applications, providing precise control over catalytic and motile behaviors at the microscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First principles study of the stability and thermal conductivity of novel Li-Be hybrid ceramics

Hybrid Li-Be ceramics, combining both tritium (T) breeder (Li) and neutron multiplier (Be) for use as part of the fuel cycle of future nuclear fusion reactors are proposed. The development of such hybrid materials may reduce thermal gradients through better matching of thermal properties, mitigating the detrimental effects that may accompany traditional breeder systems while maintaining acceptable neutron multiplication and T breeding. Here, first-principles methods are used to investigate stability and thermal transport properties of a set of compounds containing both Li and Be. It is demonstrated that BeLi 2 O 4 Ge and BeLi 2 O 4 Si are mechanically stable and have formation energies comparable with leading candidates for solid state breeder materials, Li 2 TiO 3 , Li 2 ZrO 3 . It is also demonstrated that similar to the leading candidates, these compounds are insulators with thermal transport defined by phonons. The calculated thermal conductivity of BeLi 2 O 4 Ge is slightly higher compared to Li 2 TiO 3 or Li 2 ZrO 3 while in the BeLi 2 O 4 Si it is almost three times higher compared to the rest of compounds due to a higher phonon group velocities and increased phonon lifetimes. These results indicate that hybrid Li-Be ceramics offer a potential route towards better matching of thermal properties with minimal functional property degradation, thereby offering better overall fuel cycle performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elucidating the factors controlling the methanol synthesis from CO 2 on ZnPd-ZnO/TiO 2 catalysts prepared by direct/inverse impregnation

The direct hydrogenation of CO 2 to methanol over supported ZnPd intermetallic catalysts remains a challenge due to the complex nature of the active sites, which are highly dependent on both the dispersion of ZnPd intermetallics and their proximity to ZnO. This study investigates the effect of the Pd and Zn incorporation order on methanol synthesis over TiO 2 -supported ZnPd catalysts. Catalysts were prepared via direct (Pd/Zn), inverse (Zn/Pd), and co-impregnation (Pd+Zn) methods using anatase TiO 2 as the support. Comprehensive characterization by XRD, HRTEM, CO-DRIFTS and XPS revealed that the formation of small and crystalline intermetallic β-ZnPd particles and their interaction with ZnO/ZnO x depends on the sequence of Pd and Zn incorporation. It was found that, under the reaction conditions, the ZnO x species plays a critical role in facilitating the formation of the intermetallic ZnPd through the interactions between Pd and ZnO x . In addition, ZnO x species have also been shown to modulate key catalytic properties, such as CO 2 activation and methanol selectivity. Specifically, the ZnPd/Pd surface ratio, determined by Pd dispersion and proximity to ZnO/ZnO x , was shown to determine the methanol production from CO 2 directly or via a CO intermediate. The Pd/Zn catalyst showed superior selectivity due to the in-situ formation of intermetallic species facilitated by Pd-ZnO x interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aspects of rare earth element enrichment in Allegheny Plateau coals, Pennsylvania, USA

The Allegheny Plateau in western Pennsylvania, western Maryland, and northern West Virginia has relatively flat-lying strata with southwest-northeast-trending anticlines cored by splay faults originating from the thrust faults and southeast-northwest-trending lineaments. The lineaments define both the structural relief of the anticlines and the coal rank. Coal rank in the Pennsylvanian Allegheny Group coals is medium volatile bituminous in the region of less-prominent structural relief and low volatile bituminous in the region with more pronounced anticlines. Zinc and Cl exhibit high values in coals in the vicinity of the lineaments. Although coal rank was not a parameter in the Principal components analysis, the highest rank coals clustered together in a quadrant defined, in part, by the Zn concentration. Zinc was selected as a parameter due to its possible link with hydrothermal mineralization and Zr and TiO 2 /Al 2 O 3 were selected based on their presumed association with detrital mineral influences. The highest rare earths + Y values in benches of the Lower Kittanning coal were found at sites close to the lineaments. Negative or negligible Ce anomalies (δCe) and strongly positive Gd anomalies (δGd) suggest marine or hydrothermal influences and negative Eu anomalies (δEu) along with high TiO 2 /Al 2 O 3 values suggest a terrestrial input. In conclusion, the plots of δCe vs. δGd and δCe vs. δEu show that the low volatile bituminous coals are segregated from the other coals, suggesting that the factors that influenced coal rank also influenced the distribution of the rare earth elements.

58 GEOSCIENCES↗
DOE OSTI2021

Transformations of Ti-5Al-5V-5Cr-3Mo powder due to reuse in laser powder bed fusion: A surface analytical approach

Reactive Ti-5Al-5 V-5Cr-3Mo (Ti5553) alloy feedstock powder is used in laser powder-bed fusion (LPBF). Due to the large quantity of powder necessary for LPBF, powder is reused numerous times under oxidizing environments. Transformations to the powder’s native surface oxide may impact the LPBF process and lead to deviations from expected behavior of printed parts. In this work, we present a multimodal characterization of new and reused powder by combining X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and transmission electron microscopy (TEM) of focused ion beam (FIB)-prepared cross sections of individual powder particles to understand how the surface oxide composition changes, grows, and becomes hydroxylated and hydrated due to reuse. We show that the native oxide film of Ti5553 powder is a hydroxylated mixed oxide composed of TiO 2 and Al 2 O 3 that grows from 5.6 +/- 0.7 nm to 8.3 +/- 1.1 nm due to reuse. Al oxide regions of the surface oxide become more hydroxylated during reuse in comparison to Ti oxide regions. This indicates that an outer oxide of pure TiO 2 may enhance recyclability of Ti5553 powder while the presence of Al oxides may decrease recyclability. Further characterization of surface transformations due to recyclability may eliminate unnecessary variation in LPBF.

36 MATERIALS SCIENCE↗
DOE OSTI2021

NOx sequestration by calcium aluminate cementitious materials

This study quantifies NO{sub x} uptake efficiency and explores NO{sub x} binding mechanisms in calcium aluminate cementitious (CAC) materials. Comparison between unmodified and TiO{sub 2}-modified CAC separates intrinsic NO{sub x} binding mechanisms from those related to photocatalysis. Attributed to surface-related heterogeneous reactions, the NO{sub x} binding occurs in unmodified CAC at nitrite-to-nitrate ratio of 1: 1.3 and can be increased with surface area. The photocatalytic reactions in TiO{sub 2}-modified CAC increase NO{sub x} uptake, and ~50% of converted NO{sub x} resists releasing back into the environment via dissolution. Compared to previously studied ordinary portland cement (OPC) materials, CAC increases NO{sub x} uptake capacity and demonstrates a more permanent NO{sub x} binding, potentially mitigating concerns related to the release of previously bound N-species in OPC. Examination of the interaction between NO{sub x} and a synthetic pure aluminum-bearing phase shows that the permanent NO{sub x} uptake in CAC could be largely attributed to the chemical binding of converted NO{sub x} within aluminum-bearing phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Carbon dots from surface-capping/passivation of small carbon nanoparticles with nanoscale titanium dioxide

Carbon dots are classically defined as small carbon nanoparticles (CNPs) with effective surface passivation, which has been accomplished predominantly by surface organic functionalization. In the current work, the passivation is achieved by the surface coating of CNPs with nanoscale TiO 2 for CNP/TiO 2 core/shell nanostructures, which are analogous to conventional semiconductor core/shell quantum dots (QDs). The TiO 2 capping of CNPs results in substantial enhancements in the fluorescence quantum yields, also analogous to the similar enhancements famously known for the semiconductor QDs. In conclusion, mechanistic implications of the findings, including the associated further validation on the classical definition of carbon dots, are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Revealing the relationship between molecular weight of lignin and its color, UV-protecting property

Lignin has great potential as a natural, green, and sustainable broad-spectrum sunscreen active ingredient. However, the coexistence of dark color and sunscreen properties hinders its application in cosmetics. In this study, we focus on the effects of the molecular weight of lignin on tis UV-protecting property and color in order to prepare lignin-based sunscreen with high performance. We report a prepared sunscreen containing low molecular weight lignin (F5, <1000 g/mol) exhibits good UV-protecting property (sun protection factor (SPF) = 7.14) and light color advantages (ΔE = 46.2). Moreover, a strong synergistic effect on UV-protecting property exists between low molecular weight lignin and ethylhexyl methoxycinnamate (EHMC), resulting in high SPF of F5@EHMC-based sunscreen (55.56). Additionally, added TiO 2 can efficiently mitigate the dark color of lignin-based sunscreens due to prominent covering power of TiO 2 . Moreover, lignin-based sunscreens have good biocompatibility with HaCaT cells. This work is useful for understanding the mechanism of the UV-protecting property and dark color of lignin, and for designing an efficient and safe lignin-based sunscreen.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts

A series of novel, mesoporous transition metal doped titanium dioxide-reduced graphene oxide composites are synthesized where the dopants were Mn, Co, Ni, Mo, and W. An in-situ synthesis method was used which involves a green, economic, hydrothermal process which can be scaled up easily. The composites show high surface areas (165–245 m 2 /g) and monomodal pore size distributions with average pore diameters in the range of 3–5 nm. The homogeneous distributions of the dopants are seen in SEM-EDX mapping data. The indirect band gaps of the composite materials are in the range of 2.20–2.48 eV. The composites show excellent dye adsorption activities where 100% adsorption of Rhodamine B occurs within 5 min when Mo–TiO 2 /rGO composite is used. Furthermore, the adsorbed dye can either be desorbed or photocatalytically degraded and the composite is reusable up to 10 cycles without losing significant activity. Mo–TiO 2 /rGO composite showed excellent adsorption of both cationic and anionic dyes at neutral pH.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solid breeder material crystal structure evolution due to Li burn up–Loss of crystal stability

Solid breeder materials for fusion power plants are subjected to extreme conditions of radiation damage, high temperature and designed component burn-up. Here, the loss of lattice stability of Li 2 TiO 3 due to Li burn-up was investigated using first principles-based approaches to aid evaluation of upper limit of component lifetime. The lattice stability is analyzed using calculated phonon dispersion in the Li 2 TiO 3 supercell, while Li burn-up is modeled by the introduction of Li-vacancies. It has been determined that the studied ceramic can be structurally stable up to ~40% of Li atoms burn-up. At 50% burn-up, the negative frequency branch in the phonon dispersion spectrum appears indicating the loss of lattice dynamical stability. Moreover, the structure obtained by introduction of unstable frozen phonons with minima energy amplitude also results in a phonon dispersion with negative branches in the structure obtained. Therefore, the system completely loses stability when approximately half of Li atoms are consumed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rapid Screening of Single-Atom Catalyst Synthesis Conditions Using ToF-SIMS and Facet-Dependent Single-Crystal Substrates

Single-atom catalysts (SACs) offer superior catalytic performance compared to traditional nanoparticle catalysts but are challenging to develop because of the need for extensive optimization and specialized characterization techniques. Here, this study presents a rapid and versatile method for detecting synthesis conditions and elucidating deposition mechanisms of SACs on various substrates. By depositing active elements (Au, Cu, Ni and Rh) on facet-specific single-crystalline substrates (CeO 2 , TiO 2 , MgO and Al 2 O 3 ) and employing time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we assessed facet-dependent deposition behaviors and identified optimal conditions for solution-based SAC synthesis. On CeO 2 and TiO 2 , we confirmed facet-dependent deposition, primarily influenced by oxygen vacancy density and photocatalytic activity, respectively. MgO exhibited the formation of metal oxide/hydroxide clusters for all active elements, and the degree of clustering for Cu and Ni was correlated with the facet hydrolysis susceptibility. Notably, Au and Rh deposition on MgO was facet-independent, attributed to the formation of hydroxide species in solution. Al 2 O 3 , due to its chemical stability and lack of surface defects, did not show active element deposition. This study not only provides a time and cost-efficient method for prescreening SAC synthesis conditions, but it also provides valuable insights into the various deposition mechanisms governing SAC formation on different substrates, paving the way for the rational design of tailored SACs for various catalytic applications.

ToF-SIMS↗
DOE OSTI2022

Understanding the Fluorination of Disordered Rocksalt Cathodes through Rational Exploration of Synthesis Pathways

Here, we have designed and tested several synthesis routes targeting a highly fluorinated disordered rocksalt (DRX) cathode, Li 1.2 Mn 0.4 Ti 0.4 O 1.6 F 0.4 , with each route rationalized by thermochemical analysis. Precursor combinations were screened to raise the F chemical potential and avoid the formation of LiF, which inhibits fluorination of the targeted DRX phase. MnF 2 was used as a reactive source of F, and Li 6 MnO 4 , LiMnO 2 , and Li 2 Mn 0.33 Ti 0.66 O 3 were tested as alternative Li sources. Each synthesis procedure was monitored using a multi-modal suite of characterization techniques including X-ray diffraction, nuclear magnetic resonance, thermogravimetric analysis, and differential scanning calorimetry. From the resulting data, we advance the understanding of oxyfluoride synthesis by outlining the key factors limiting F solubility. At low temperatures, MnF 2 consistently reacts with the Li source to form LiF as an intermediate phase, thereby trapping F in strong Li-F bonds. LiF can react with Li 2 TiO 3 to form a highly lithiated and fluorinated DRX (Li 3 TiO 3 F); however, MnO is not easily incorporated into this DRX phase. Although higher temperatures typically increase solubility, the volatility of LiF above its melting point (848 °C) inhibits fluorination of the DRX phase. Based on these findings, metastable synthesis techniques are suggested for future work on DRX fluorination.

36 MATERIALS SCIENCE↗