Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thrust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A thermal control approach for a solar electric propulsion thrust subsystem

A thrust subsystem thermal control design is defined for a Solar Electric Propulsion System (SEPS) proposed for the comet Halley Flyby/comet Tempel 2 rendezvous mission. A 114 node analytic model, developed and coded on the systems improved numerical differencing analyzer program, was employed. A description of the resulting thrust subsystem thermal design is presented as well as a description of the analytic model and comparisons of the predicted temperature profiles for various SEPS thermal configurations that were generated using this model. It was concluded that: (1) a BIMOD engine system thermal design can be autonomous; (2) an independent thrust subsystem thermal design is feasible; (3) the interface module electronics temperatures can be controlled by a passive radiator and supplementary heaters; (4) maintaining heat pipes above the freezing point would require an additional 322 watts of supplementary heating power for the situation where no thrusters are operating; (5) insulation is required around the power processors, and between the interface module and the avionics module, as well as in those areas which may be subjected to solar heating; and (6) insulation behind the heat pipe radiators is not necessary.

Maloy, J. E.↗

Low-thrust chemical orbit transfer propulsion

The need for large structures in high orbit is discussed in terms of the many mission opportunities which require such structures. Mission and transportation options for large structures are presented, and it is shown that low-thrust propulsion is an enabling requirement for some missions and greatly enhancing to many others. A general comparison of electric and low-thrust chemical propulsion is made and the need for and requirements of low-thrust chemical propulsion are discussed in terms of the interactions that are perceived to exist between the propulsion system and the large structure.

Pelouch, J. J., Jr.↗

Estimation of attainable leading-edge thrust for wings at subsonic and supersonic speeds

The factors which place limits on the theoretical leading edge thrust are identified. An empirical method for the estimation of attainable thrust is presented. The method is based on the use of simple sweep theory to permit a two dimensional analysis, the use of theoretical airfoil programs to define thrust dependence on local geometric characteristics, and the examination of experimental two dimensional airfoil data to define limitations imposed by local Mach numbers and Reynolds numbers. Comparisons of theoretical and experimental aerodynamic characteristics for a series of wing body configurations are examined.

Carlson, H. W.↗

Low-thrust vehicle concept studies

Part of NASA's orbit transfer vehicle propulsion program is devoted to the development of analytical tools to define propulsion system performance, weight, size, and other parameters, and to develop packing concepts for LSS mission propulsion and payload systems. Packing studies discussed relate to shuttle cargo bay constraints; low thrust engine profile and performance; large space frame concept and weight; low thrust vehicles stowed in shuttle, LSS payload capability, and weight distribution. Further study is needed to determine interactions among propulsion system, payload structures, and shuttle. Low thrust-to-weight ratios are desirable to maximize payload weights and deployed areas.

Smolak, G. R.↗

Analytical investigation of two hydrogen-oxygen rocket engine systems for low-thrust application

Two hydrogen-oxygen rocket engine system concepts were analyzed parametrically over a thrust range from 100 to 1000 pounds and a chamber pressure range from 175 to 1000 psia. Both concepts were regeneratively cooled with hydrogen and were pump-fed by electric motor driven positive displacement pumps. Electric power was provided by either a turboalternator (turboalternator concept) or some means external to the engine system (auxiliary power concept). The computer program used to conduct the analyses along with the design characteristics of the major engine system components are briefly described. The feasible design range of the systems over the parametric range of thrust is discussed in terms of allowable chamber pressure considering the constraints of thrust chamber cooling and cycle power. Engine system estimated performance, mass, and dimensional envelope parametric data within the feasible design range are presented.

Scheer, D. D.↗

An application of extremal field guidance in statistical low thrust guidance analysis

The subject of this paper is the application of extremal field guidance to the covariance analysis of low thrust retargeting guidance. The general procedure for low thrust navigation analysis is briefly reviewed. The basic equations of trajectory optimization and extremal field guidance are presented with emphasis on the low thrust problem. The adopted formulation includes thruster on-off times as control variables and accounts for the effects of model parameter variations. A method of solution of the guidance equations is outlined; and the application of the solution in a covariance analysis, including a procedure for the treatment of model parameter variations as either biases or first order Gauss-Markov stochastic processes, is discussed.

Jacobson, R. A.↗

Supersonic wings with significant leading-edge thrust at cruise

Experimental/theoretical correlations are presented which show that significant levels of leading edge thrust are possible at supersonic speeds for certain planforms which match the theoretical thrust distribution potential with the supporting airfoil geometry. The analytical process employed spanwise distribution of both it and/or that component of full theoretical thrust which acts as vortex lift. Significantly improved aerodynamic performance in the moderate supersonic speed regime is indicated.

Robins, A. W.↗

Some effects of thermal-cycle-induced deformation in rocket thrust chambers

The deformation process observed in the hot gas side wall of rocket combustion chambers was investigaged for three different liner materials. Five thrust chambers were cycled to failure by using hydrogen and oxygen as propellants at a chamber pressure of 4.14 MN/cu m. The deformation was observed nondestructively at midlife points and destructively after failure occurred. The cyclic life results are presented with an accompanying discussion about the problems of life prediction associated with the types of failures encountered in the present work. Data indicating the deformation of the thrust chamber liner as cycles are accumulated are presented for each of the test thrust chambers. From these deformation data and observation of the failure sites it is evident that modeling the failure process as classic low cycle thermal fatigue is inadequate as a life prediction method.

Hannum, N. P.↗

Thrust and ignition transients of the Space Shuttle solid rocket motor

Techniques developed for predicting and analyzing ignition, pressurization, and thrust transients in large segmented motors were applied to the four developmental Space Shuttle solid rocket motors. Following the first test, attention was focused on understanding dynamic thrust and the rate of thrust increase during pressurization and predicting effects of reduced igniter mass flow rate and gas temperature. The close coupling between the igniter and the head-end segment and the high length-to-diameter ratio make understanding of the longitudinal pressure waves essential. The igniter performance along with igniter to head-end segment geometry govern the induction interval and head-end segment ignition. Following ignition of the head-end segment, subsequent flame spreading and pressurization tend to be motor properties which are not appreciably altered by changes in the head-end igniter mass flow rate.

Caveny, L. H.↗

Low thrust chemical propulsion for orbit transfer of large space structures

For transporting Large Space Structures (LSS) from Low Earth Orbit (LEO) to Geosynchronous Equatorial Orbit (GEO), a variety of low thrust engine cycles have been evaluated for oxygen/hydrogen and oxygen/hydrocarbon propellants. The engine cycles included conventional propellant turbine drives (gas generator, expander, and staged-combustion cycles), turboalternator/electric motor pump drive, and fuel-cell/electric motor pump drive, as well as pressure-fed engines. The thrust chamber cooling limits and the engine cycle limits were established for a range of thrust levels. The candidate engine cycles were analyzed, screened, rated, and two engine cycle/configurations were selected for preliminary engine design. Preliminary engine designs for these two engines were formulated and engine design layouts prepared and parametric engine data generated.

Shoji, J. M.↗

The influence of leading-edge thrust on twisted and cambered wing design for supersonic cruise

A study of leading-edge thrust phenomena at supersonic speeds has shown that although these forces are not large, they can be a significant factor in the design of wings for supersonic cruise. It is seen that the rather severe twisted and cambered wing surfaces resulting from the application of present design methods, which ignore leading-edge thrust, can be replaced by more moderate surfaces with little or no loss in aerodynamic efficiency if realistic possibilities for the attainment of some fraction of the theoretical thrust are taken into account.

Carlson, H. W.↗

A computer program for wing subsonic aerodynamic performance estimates including attainable thrust and vortex lift effects

Numerical methods incorporated into a computer program to provide estimates of the subsonic aerodynamic performance of twisted and cambered wings of arbitrary planform with attainable thrust and vortex lift considerations are described. The computational system is based on a linearized theory lifting surface solution which provides a spanwise distribution of theoretical leading edge thrust in addition to the surface distribution of perturbation velocities. The approach used relies on a solution by iteration. The method also features a superposition of independent solutions for a cambered and twisted wing and a flat wing of the same planform to provide, at little additional expense, results for a large number of angles of attack or lift coefficients. A previously developed method is employed to assess the portion of the theoretical thrust actually attainable and the portion that is felt as a vortex normal force.

Carlson, H. W.↗

Thrust-induced effects on low-speed aerodynamics of fighter aircraft

Results of NASA Langley has conducted wind-tunnel investigations of several fighter configurations conducted to determine the effects of both thrust vectoring and spanwise blowing are reviewed. A recent joint NASA/Grumman Aerospace Corporation/U.S. Air Force Wright Aeronautical Laboratory wind-tunnel investigation was conducted to examine the effects of spanwise blowing on the trailing-edge flap system. This application contrasts with the more familiar method of spanwise blowing near the wing leading edge. Another joint program among NASA/McDonnell Aircraft Company/U.S. Air Force Wright Aeronautical Laboratory investigated the effects of reverse thrust on the low-speed aerodynamics of an F-15 configuration. The F-15 model was fitted with a rotating van thrust reverser concept which could simulate both in-flight reversing for approach and landing or full reversing for ground roll reduction. The significant results of these two joint programs are reported.

Banks, D. W.↗

Thrust-induced effects on low-speed aerodynamics of fighter aircraft

The design and technology requirements for STOL fighter aircraft as defined in NASA studies are reviewed. The research has concentrated on advanced high-lift systems using mechanical flaps, methods of obtaining longitudinal trim during the use of thrust vectoring, and thrust reversal to shorten ground roll distances. Several early configurations are described, and investigations of the effect of thrust reversal on the low-speed aerodynamics of the F-15 are detailed. Although the NASA design was a wing-canard configuration, similarities in a Grumman baseline STOL aircraft allowed incorporation of the Grumman nacelle, primary nozzles, spanwise blowing nozzles, and trailing-edge flap systems.

Banks, D. W.↗

Thrust reversing effects on horizontal tail effectiveness of twin-engine fighter aircraft

The Langley Research Center has conducted an experimental program to determine the interference effects of thrust reversing on horizontal tail effectiveness of a twin engine, general research fighter model at approach (Mach number 0.15) and in-flight (Mach number 0.60 and 0.90) speeds. Twin vertical tails were tested at three longitudinal locations. Two nonaxisymmetric nozzle reverser concepts were studied. The effects of thrust reversing on horizontal tail effectiveness were found to be very dependent upon vertical tail locations. At approach speeds thrust reverser operation usually resulted in large variations in horizontal tail effectiveness as either nozzle pressure ratio or model angle of attack was varied. Either increases or decreases in tail effectiveness ocurred due to reverse operation depending upon tail location. At in-flight conditions there were always decreases in tail effectiveness due to reverser operation regardless of vertical tail location.

Capone, F. J.↗

Linearized transfer between inclined circular orbits using low-thrust blow down propulsion system

Noncoplanar transfers between neighboring circular orbits are presented for spacecraft using their own low-thrust blow down propulsion system. It is assumed that the out-of-plane angle between the decaying thrust vector and the current orbit plane remains constant for each extended burn. Switching conditions are derived for the cutoff and relight of the propulsion system in order to carry out a given transfer with inclination change. Furthermore the location where the thrust acceleration is initially applied with respect to the line of nodes of the two orbits is uniquely determined. Finally an analytic derivation of the linearized coplanar motion for stationkeeping and terminal rendezvous studies is also presented and a scheme for deriving the second order correction shown.

Kechichian, J. A.↗

Effect of thrust vectoring and wing maneuver devices on transonic aeropropulsive characteristics of a supersonic fighter

The aeropropulsive characteristics of an advanced fighter designed for supersonic cruise were determined in the Langley 16-Foot Transonic Tunnel. The objectives of this investigation were to evaluate the interactive effects of thrust vectoring and wing maneuver devices on lift and drag and to determine trim characteristics. The wing maneuver devices consisted of a drooped leading edge and a trailing-edge flap. Thrust vectoring was accomplished with two dimensional (nonaxisymmetric) convergent-divergent nozzles located below the wing in two single-engine podded nacelles. A canard was utilized for trim. Thrust vector angles of 0 deg, 15 deg, and 30 deg were tested in combination with a drooped wing leading edge and with wing trailing-edge flap deflections up to 30 deg. This investigation was conducted at Mach numbers from 0.60 to 1.20, at angles of attack from 0 deg to 20 deg, and at nozzle pressure ratios from about 1 (jet off) to 10. Reynolds number based on mean aerodynamic chord varied from 9.24 x 10 to the 6th to 10.56 x 10 to the 6th.

Capone, F. J.↗

Thrust-induced effects on subsonic longitudinal aerodynamic characteristics of a vectored-engine-over-wing configuration

An investigation was conducted in the Langley 4 by 7 Meter Tunnel of the thrust induced effects on the longitudinal aerodynamic characteristics of a vectored-engine-over-wing fighter aircraft. The investigation was conducted at Mach numbers from 0.14 to 0.17 over an angle-of-attack range from -2 deg to 26 deg. The major model variables were the spanwise blowing nozzle sweep angle and main nozzle vector angle along with trailing edge, flap deflections. The overall thrust coefficient (main and spanwise nozzles) was varied from 0 (jet off) to 2.0. The results indicate that the thrust-induced effects from the main nozzle alone were small and mainly due to boundary-layer control affecting a small area behind the nozzle. When the spanwise blowing nozzles were included, the induced effects were larger than the main nozzle alone and were due to both boundary layer control and induced circulation lift. No leading edge vortex effects were evident.

Quinto, P. F.↗