Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

State of the Art Thermal Protection Systems at NASA for Outer Planet Probes and TPS Developments in Support of Mars Sample Return Mission

In the recent NASA Planetary Science Decadal Survey (2023-2032) the committee recommended that the highest scientific priority of NASA’s robotic exploration efforts this decade should be completion of Mars Sample Return (MSR) and recommended to prioritize the Uranus Orbiter and Probe as the highest-priority new flagship missions for the next decade while Saturn Probe is one of the themes still under consideration for New Frontiers. This short course presentation will discuss relevant environments for outer planet missions and TPS materials under development at NASA and their readiness to meet mission needs. In addition the presentation will discuss the status of thermal protection system for the MSR Earth Entry System that brings the Martian samples safely through the Earth’s atmosphere.

Thermal Protection Systems↗
DOE OSTI2020

Design, Analysis, Comparison, and Experimental Validation of Insulated Metal Substrates for High-Power Wide-Bandgap Power Modules

Direct bonded copper (DBC) substrates used in power modules have limited heat spreading and manufacturing capability due to ceramic properties and manufacturing technology. The ceramic and copper bonding is also subject to high mechanical stress due to coefficient of thermal expansion mismatch between the copper and the ceramic. For wide-bandgap (WBG) devices, it is of interest exploring new substrate technologies that can overcome some of the challenges of direct bonded copper substrates. In this technical paper, the design, analysis, and comparison of insulated metal substrates (IMSs) for high-power wide-bandgap semiconductor-based power modules are discussed. This paper starts with technical description and discussion of state-of-the-art DBC substrates with different ceramic insulators such as aluminum nitride (AlN), Al 2 O 3 , and Si 3 N 4 . Next, an introduction of IMSs and their material properties, and a design approach for SiC (silicon carbide) metal-oxide-semiconductor field-effect transistor (MOSFET)-based power modules for high-power applications is provided. The influence of dielectric thickness on the power handling capability of the substrate are also discussed. The designed IMS and DBC substrates were characterized in terms of steady-state and transient thermal performance using finite element simulation. Finally, the performance of the IMS and DBC are validated in an experimental setup under different loading and cooling temperature conditions. We report the simulation and experimental results showed that the IMS can provide high steady-state thermal performance for high-power modules based on SiC MOSFETs. Furthermore, the IMS provided enhanced transient thermal performance, which provided a reduced junction temperature when the module is operated at low fundamental output frequencies in traction drive systems.

42 ENGINEERING↗
NASA NTRS1973

An integrated human thermal system and its unsteady-state simulation

Consideration of an integrated human thermal system consisting of a human thermal system proper and an external thermal device. A mathematical model of the integrated system has been used in a computer simulation, and the simulation results have been verified through comparison with the results of experiments carried out on nine human subjects. The comparison indicates that the model simulates the system reasonably well.

Hsu, F. T.↗
DOE OSTI2024

Integrated Steady-State System Package for Nuclear Thermal Propulsion Analysis Using Multi-Dimensional Thermal Hydraulics and Dimensionless Turbopump Treatment

Nuclear thermal propulsion is an evolving technology that can be utilized for long-distance space travel. This technology yields the advantage of a high thrust and specific impulse, but requires an examination of the potential design adjustments necessary to enhance its feasibility. The development of nuclear thermal propulsion requires a comprehensive understanding of the system-level behavior during transient and steady-state operation. This paper extends our previous research by including the proper handling of turbomachinery with multi-channel thermal hydraulic simulations only for steady-state solutions. The system-level approach presented here enables the treatment of the turbopump components through non-dimensional analysis that eliminates the assumption of constant efficiencies. All the other components within the system (e.g., reflector and core) can be discretized to multiple channels and layers, in which the full thermal hydraulic solution is established. The approach chosen here enables the realistic modeling of the propellant flow within the expander cycle by capturing the pressure losses, mass flow rate splits, and enthalpy gain for various operational conditions. The verification of the package is completed through point comparisons of previous investigations into similar system designs. Furthermore, sensitivity studies are used to benchmark the capabilities of the package and investigate solution variations due to the perturbation of operational conditions and regimes. The sensitivity studies performed here are important to capture variation in flow characteristics (e.g., temperature, pressure, mass flow rates) for different design objectives such as the thrust and specific impulse. This work demonstrates that system-level simulations lacking multi-channel capability and proper turbomachinery treatment may yield higher uncertainties in understanding the engine’s response and characteristics to changing various requirements. This is extremely important when screening the design space of such propulsion systems and when transient simulations are required.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Thermal bootstrap of matrix quantum mechanics

We implement a bootstrap method that combines stationary state conditions, thermal inequalities, and semidefinite relaxations of matrix logarithm in the ungauged one-matrix quantum mechanics, at finite rank N as well as in the large N limit, and determine finite temperature observables that interpolate between available analytic results in the low and high temperature limits respectively. We also obtain bootstrap bounds on thermal phase transition as well as preliminary results in the ungauged two-matrix quantum mechanics.

1/N Expansion↗
DOE OSTI2023

Rehybridization dynamics into the pericyclic minimum of an electrocyclic reaction imaged in real-time

Abstract Electrocyclic reactions are characterized by the concerted formation and cleavage of both σ and π bonds through a cyclic structure. This structure is known as a pericyclic transition state for thermal reactions and a pericyclic minimum in the excited state for photochemical reactions. However, the structure of the pericyclic geometry has yet to be observed experimentally. We use a combination of ultrafast electron diffraction and excited state wavepacket simulations to image structural dynamics through the pericyclic minimum of a photochemical electrocyclic ring-opening reaction in the molecule α-terpinene. The structural motion into the pericyclic minimum is dominated by rehybridization of two carbon atoms, which is required for the transformation from two to three conjugated π bonds. The σ bond dissociation largely happens after internal conversion from the pericyclic minimum to the electronic ground state. These findings may be transferrable to electrocyclic reactions in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Initial steady-state core simulation capability or thermal and pool-type molten salt reactors, coupling reactor physics, thermal-hydraulics, and evolving chemistry

This report presents the development and validation of an initial steady-state multiphysics capability for molten salt reactors (MSRs) under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in Fiscal Year 2025. The framework integrates neutronics, thermal-hydraulics, species transport, and thermochemistry to capture the coupled dynamics of liquid-fueled systems. Implementation and testing were performed on two representative designs: the Molten Salt Reactor Experiment (MSRE), a thermal-spectrum, channeled-flow reactor, and the Lotus Molten Salt Reactor (L-MSR), a fast-spectrum, pool-type reactor. The modeling suite employs Griffin for reactor physics and depletion, Pronghorn and SAM for thermal-hydraulics, Thermochimica for chemistry, and Saline for thermophysical properties, with benchmarking and validation carried out against historical MSRE data, experimental flow-loop measurements, and reference depletion calculations from Monte Carlo codes. The framework demonstrated the ability to reproduce key reactor behaviors including temperature feedback, reactivity losses, delayed neutron precursor transport, xenon poisoning, and redox potential evolution. The results confirm the feasibility and accuracy of the coupled models in predicting steady-state and selected transient MSR behaviors. This latter ones are used in this report as a proxy indicating that the steady-state models from which the transient starts are accurate. For MSRE, validation showed good agreement with pump start-up and natural circulation tests, while for the L-MSR, benchmarking confirmed hydraulic calibration and consistency of neutronics–thermal coupling. The tools also provided new insights into species transport, noble metal deposition, and salt solidification dynamics. On the Xenon transport front, the code is validated against the steady state Xenon poisoining measurement and showed good agreement with the experimental value. Identified areas for future work include advanced void transport modeling, three-dimensional simulations, improved alloy corrosion models, and tighter integration with high-fidelity Monte Carlo codes. These developments provide a foundation for high-fidelity MSR simulations that can support reactor design optimization, safety assessments, and long-term operational strategies.

42 - ENGINEERING↗
NASA NTRS1991

Measurements of the effects of thermal contact resistance on steady state heat transfer in phosphoric-acid fuel cell stack

The influence of the thermal contact resistance on the heat transfer between the electrode plates, and the cooling system plate in a phosphoric-acid fuel-cell stack was experimentally investigated. The investigation was conducted using a set-up that simulates the operating conditions prevailing in a phosphoric acid fuel-cell stack. The fuel-cell cooling system utilized three types of coolants, water, engine oil, and air, to remove excess heat generated in the cell electrode and to maintain a reasonably uniform temperature distribution in the electrode plate. The thermal contact resistance was measured as a function of pressure at the interface between the electrode plate and the cooling system plate. The interface pressure range was from 0 kPa to 3448 kPa, while the Reynolds number for the cooling limits varied from 15 to 79 for oil, 1165 to 6165 for water, and 700 to 6864 for air. Results showed that increasing the interface pressure resulted in a higher heat transfer coefficient.

Abdul-Aziz, Ali↗
NASA NTRS2012

Advanced Stirling Radioisotope Generator (ASRG) Thermal Power Model in MATLAB

This paper presents a one-dimensional steady-state mathematical thermal power model of the ASRG. It aims to provide a guideline of understanding how the ASRG works and what can change its performance. The thermal dynamics and energy balance of the generator is explained using the thermal circuit of the ASRG. The Stirling convertor performance map is used to represent the convertor. How the convertor performance map is coupled in the thermal circuit is explained. The ASRG performance characteristics under i) different sink temperatures and ii) over the years of mission (YOM) are predicted using the one-dimensional model. Two Stirling converter control strategies, i) fixing the hot-end of temperature of the convertor by adjusting piston amplitude and ii) fixing the piston amplitude, were tested in the model. Numerical results show that the first control strategy can result in a higher system efficiency than the second control strategy when the ambient gets warmer or the general-purpose heat source (GPHS) fuel load decays over the YOM. The ASRG performance data presented in this paper doesn't pertain to the ASRG flight unit. Some data of the ASRG engineering unit (EU) and flight unit that are available in public domain are used in this paper for the purpose of numerical studies.

Wang, Xiao-Yen, J.↗
NASA NTRS1991

Pair-density transitions in accretion disk coronae

The thermal and e(+)e(-)-pair equilibrium structure of two-temperature disk coronae above a cool (about 10 exp 6 K) disk around a black hole of 10 solar masses are investigated. Soft photons are assumed to be amply supplied from the cool disk. Two-pair thermal equilibrium points are found for a given proton column density: the low state with very small pair density and the high state dominated by pairs. Both states are thermally unstable, while for perturbations in pair density the high state is unstable and the low state is stable. Two possible scenarios are discussed for the fate of a two-temperature corona. When the proton optical depth is relatively small (e.g., less than 1) and the temperature of input soft photons is low (e.g., less than 10 exp 6 K), the corona will undergo a limit cycle between the high state and the low state on a time scale of milliseconds. As a consequence of Compton scattering of the soft photons, the emergent spectrum in the high state is rather flat with a big Wien bump at about 100 keV, whereas it is composed of a power-law component in the low state. Some observational consequences are briefly discussed in connection with the high-low spectral transition in Cyg X-1.

Kusunose, Masaaki↗
DOE OSTI2026

Deciphering the excited-state landscape of Cr(iii) tris(diimines) using [Cr(phen) 3 ] 3+

Earth-abundant Cr(III) polypyridines chromophores feature long-lived doublet ligand-field excited states. The thermally equilibrated 2 T 1 / 2 E ligand-field excited state manifold produces broad, structured UV-Vis-NIR absorption bands. Although ubiquitous across pseudo-octahedral Cr(III) diimine complexes, the dynamics and individual electronic transitions underlying these spectra have remained elusive. Here, we combine time-resolved spectroscopy and multiconfigurational calculations to assign ground- and excited-state absorption spectra of Cr(III) tris(1,10-phenanthroline), [Cr(phen) 3 ] 3+ , as a prototypical example for this class of complexes. Excited-state kinetics reveal a rapid biexponential decay of the initially prepared intraligand/ligand-to-metal charge transfer [ 4 ( 1 IL)/ 4 LMCT] excited state into the lowest 2 T 1 / 2 E state within 10 picoseconds, assigned to intersystem crossing and vibrational relaxation. Calculations identify broad excited-state absorption features associated with metal-centered ligand-field states ( 2 MC) mixed with intraligand ( 2 IL) transitions within the doublet manifold. These results provide detailed spectral assignments and highlight the need to include multiconfigurational ligand-based orbitals when modeling the spectral properties of Cr(III) coordination complexes.

Barth, Alexandra T. [North Carolina State Universi↗
NASA NTRS1990

Linear canonical transformations of coherent and squeezed states in the Wigner phase space. III - Two-mode states

It is shown that the basic symmetry of two-mode squeezed states is governed by the group SP(4) in the Wigner phase space which is locally isomorphic to the (3 + 2)-dimensional Lorentz group. This symmetry, in the Schroedinger picture, appears as Dirac's two-oscillator representation of O(3,2). It is shown that the SU(2) and SU(1,1) interferometers exhibit the symmetry of this higher-dimensional Lorentz group. The mathematics of two-mode squeezed states is shown to be applicable to other branches of physics including thermally excited states in statistical mechanics and relativistic extended hadrons in the quark model.

Han, D.↗
NASA NTRS2014

Brown Dwarf Variability: What's Varying and Why?

Surveys by ground based telescopes, HST, and Spitzer have revealed that brown dwarfs of most spectral classes exhibit variability. The spectral and temporal signatures of the variability are complex and apparently defy simplistic classification which complicates efforts to model the changes. Important questions include understanding if clearings are forming in an otherwise uniform cloud deck or if thermal perturbations, perhaps associated with breaking gravity waves, are responsible. If clouds are responsible how long does it take for the atmospheric thermal profile to relax from a hot cloudy to a cooler cloudless state? If thermal perturbations are responsible then what atmospheric layers are varying? How do the observed variability timescales compare to atmospheric radiative, chemical, and dynamical timescales? I will address such questions by presenting modeling results for time-varying partly cloudy atmospheres and explore the importance of various atmospheric processes over the relevant timescales for brown dwarfs of a range of effective temperatures. Regardless of the origin of the observed variability, the complexity seen in the atmospheres of the field dwarfs hints at the variability that we may encounter in the next few years in directly imaged young Jupiters. Thus understanding the nature of variability in the field dwarfs, including sensitivity to gravity and metallicity, is of particular importance for exoplanet characterization.

brown dwarfs↗
NASA NTRS2018

Near-Field Heat Transfer Enabled Nanothermomechanical Memory and Logic Devices

A thermomechanical memory/logic device is disclosed. In embodiments, the thermomechanical device includes a first thermally controlled terminal (e.g., hot terminal); a second thermally controlled terminal (e.g., cool terminal/base); a stem or other structure that can be thermally expanded connected to the cool terminal; and a thermal conductive head coupled to the stem. The head can exchange heat with the hot terminal. The stem and head are between the first thermally controlled terminal and the second thermally controlled terminal, wherein the stem expands or contracts in response to heat absorbed or given off by the thermal conductive head, causing the head to move towards the first thermally controlled terminal or towards the second thermally controlled terminal until a stable state is reached. For example, bistable thermal states can be used to implement logic states (e.g., ZERO or ONE states).

Ndao, Sidy↗
DOE OSTI2023

Spin Squeezing as a Probe of Emergent Quantum Orders

Nuclear magnetic resonance (NMR) experiments can reveal local properties in materials, but are often limited by the low signal-to-noise ratio. Spin squeezed states have an improved resolution below the Heisenberg limit in one of the spin components, and have been extensively used to improve the sensitivity of atomic clocks, for example [1]. Interacting and entangled spin ensembles with non-linear coupling are a natural candidate for implementing squeezing. Furthermore, we propose measurement of the spin-squeezing parameter that itself can act as a local probe of emergent orders in quantum materials. In particular, we demonstrate how to investigate an anisotropic electric field gradient via its coupling to the nuclear quadrupole moment. While squeezed spin states are pure, the squeezing parameter can be estimated for both pure and mixed states. We evaluate the range of fields and temperatures for which a thermal-equilibrium state is sufficient to improve the resolution in an NMR experiment and probe relevant parameters of the quadrupole Hamiltonian, including its anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

State of the Art in Thermal Catalytic Upgrading of Biomass and Biomass-Derived Intermediates

Biomass-derived energy sources represent a promising domestic route for fuel and chemical production, taking advantage of largely underutilized biological and waste resources. Heterogeneous catalysis plays a key role in these biomass conversion processes, as reflected by all American Society for Testing and Materials–approved pathways for producing sustainable aviation fuel proceeding through a catalytic step. This concise review seeks to establish the state of the art in thermal catalytic process development for various biomass-derived feedstocks and the current enabling capabilities that aid this development. Research needs are identified and described throughout the article, as further advancements in heterogeneous catalysis are required to improve the affordability and realize the full potential of biomass-derived products.

09 BIOMASS FUELS↗
NASA NTRS1985

Statistical theory of cubic Langmuir turbulence

The cubic direct interaction approximation is applied to a truncated (in Fourier space) version of the cubically nonlinear Schroedinger equation model of Langmuir physics. The results are compared (in the three-mode case) to those for an ensemble of numerical solutions of the dynamical equations with 10,000 different sets of Gaussianly distributed initial conditions. In the undriven, undamped case, the statistical theory (but not the ensemble) evolves to a state of thermal equilibrium. In the driven, damped case, the statistical theory appears to evolve to a state close to that corresponding to one of the limit cycles of the dynamical equations.

Sun, G.-Z.↗