Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strain microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Coercivity and superparamagnetic evolution of high energy ball milled (HEBM) bulk CoFe{sub 2}O{sub 4} material

Ball milling (BM) of bulk CoFe{sub 2}O{sub 4} powder material carried out in order to study its structural stability and attendant property changes with respect to coercivity enhancements and superparamagnetic behaviors, showed that drastic crystallite size reduction occurred within the first 1 h of ball milling. Crystallite size dropped from 74 nm for the as-received material to a value of 11.6 nm for 600 min of ball milling. Combined X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses confirmed crystallite size reduction with corresponding increase in interparticle agglomeration/pores with increasing milling time. The maximum coercivity of 0.46 T and the crystallite size of 15.6 nm were recorded with 20 min, while peak residual strain of 0.0066 mm/mm was for 180 min of BM. Material with peak coercivity value did not have peak residual strain, or minimum crystallite size, thereby suggesting that other structural defects contributed to coercivity enhancement. The saturation magnetization (M{sub s}) value decreased continuously with increasing milling time, while remanence magnetization (M{sub r}) and coercivity decreased with increasing BM time, after an initial increase. Moessbauer spectroscopy (MS) measurements confirmed both particle size distribution and decomposition/disordering of the material together with superparamagnetism as BM time increased. The degree of inversion ranged from 41% to 71.7% at different milled states from Moessbauer spectroscopy. The internal magnetic fields of the Fe sites associated with the tetrahedral and octahedral sites were 507.4 kOe and 492 kOe respectively in the unmilled state, while 484 kOe and 468.5 kOe in the 600 min milled state correspondingly.

36 MATERIALS SCIENCE↗

Characterization of high energy Xe ion irradiation effects in single crystal molybdenum with depth-resolved synchrotron microbeam diffraction

Microbeam X-ray diffraction experiments were conducted at beam line 34-ID of the Advanced Photon Source (APS) on fission fragment energy Xe heavy ion irradiated single crystal Molybdenum (Mo). Lattice strain measurements were obtained with a depth resolution of 0.7 mu m, which is critical in resolving the peculiar heterogeneity of irradiation damage associated with heavy ion irradiation. Q-space diffraction peak shift measurements were correlated with lattice strain induced by the ion irradiations. Transmission electron microscopy (TEM) characterizations were performed on the as-irradiated materials as well. Nanometer sized Xe bubble microstructures were observed via TEM. Molecular Dynamics (MD) simulations were performed to help interpret the lattice strain measurement results from the experiment. This study showed that the irradiation effects by fission fragment energy Xe ion irradiations can be collaboratively understood with the depth resolved X-ray diffraction and TEM measurements under the assistance of MD simulations. (c) 2015 Elsevier B.V. All rights reserved.

Yun, Di (ORCID:0000000297673214)↗

Dislocation network at InN/GaN interface revealed by scanning tunneling microscopy

For heteroepitaxy of InN on GaN(0001) by molecular-beam epitaxy, the lattice misfit strain is relieved by misfit dislocations (MDs) formed at the interface between InN and GaN. Imaging by scanning tunneling microscopy (STM) of the surfaces of thin InN epifilms reveals line feature parallel to <1120>. Their contrast becomes less apparent for thicker epifilms. From the interline spacing as well as a comparison with transmission electron microscopy studies, it is suggested that they correspond to the MDs beneath the surface. The STM contrast originates from both the surface distortion caused by the local strain at MDs and the electronic states of the defects.

36 MATERIALS SCIENCE↗

Imaging Light‐Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping

Abstract In recent years, halide perovskite materials have been used to make high‐performance solar cells and light‐emitting devices. However, material defects still limit device performance and stability. Here, synchrotron‐based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr 3 (MA = CH 3 NH 3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light‐induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X‐ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.

36 MATERIALS SCIENCE↗

Improvement of the quality of graphene-capped InAs/GaAs quantum dots

In this paper, we study the transfer of graphene onto InAs/GaAs quantum dots (QDs). The graphene is first grown on Cu foils by chemical vapor deposition and then polymer Polymethyl Methacrylate (PMMA) is deposited on the top of graphene/Cu. High quality graphene sheet has been obtained by lowering the dissolving rate of PMMA using vapor processing. Uncapped as well as capped graphene InAs/GaAs QDs have been studied using optical microscopy, scanning electron microscopy, and Raman spectroscopy. We gather from this that the average shifts Δω of QDs Raman peaks are reduced compared to those previously observed in graphene and GaAs capped QDs. The encapsulation by graphene makes the indium atomic concentration intact in the QDs by the reduction of the strain effect of graphene on QDs and the migration of In atoms towards the surface. This gives us a new hetero-structure graphene–InAs/GaAs QDs wherein the graphene plays a key role as a cap layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong strain rate effect on the plasticity of amorphous silica nanowires

With electron-beam (e-beam) off, in-situ tensile experiments on amorphous silica nanowires (NWs) were performed inside a transmission electron microscope (TEM). By controlling the loading rates, the strain rate can be adjusted accurately in a wide range. The result shows a strong strain rate effect on the plasticity of amorphous silica NWs. At lower strain rate, the intrinsic brittle materials exhibit a pronounced elongation higher than 100% to failure with obvious necking near ambient temperature. At the strain rate higher than 5.23 × 10{sup −3}/s, the elongation of the NW decreased dramatically, and a brittle fracture feature behavior was revealed. This ductile feature of the amorphous silica NWs has been further confirmed with the in-situ experiments under optical microscopy while the effect of e-beam irradiation could be eliminated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polarization Raman spectroscopy of GaN nanorod bundles

We performed polarization Raman spectroscopy on single wurtzite GaN nanorod bundles grown by plasma-assisted molecular beam epitaxy. The obtained Raman spectra were compared with those of GaN epilayer. The spectral difference between the GaN nanorod bundles and epilayer reveals the relaxation of Raman selection rules in these GaN nanorod bundles. The deviation of polarization-dependent Raman spectroscopy from the prediction of Raman selection rules is attributed to both the orientation of the crystal axis with respect to the polarization vectors of incident and scattered light and the structural defects in the merging boundary of GaN nanorods. The presence of high defect density induced by local strain at the merging boundary was further confirmed by transmission electron microscopy. The averaged defect interspacing was estimated to be around 3 nm based on the spatial correlation model.

36 MATERIALS SCIENCE↗

3D strain field reconstruction by inversion of dynamical scattering

Strain governs not only the mechanical response of materials but also their electronic, optical, and catalytic properties. For this reason, the measurement of the 3D strain field is crucial for a detailed understanding and for further development of material properties through strain engineering. However, measuring strain variations along the electron beam direction has remained a major challenge for (scanning-) transmission electron microscopy (S/TEM). In this article, we present a method for 3D strain field determination using 4D-STEM. The method is based on the inversion of dynamical diffraction effects, which occur at strain field variations along the beam direction. We test the method against simulated data with a known ground truth and demonstrate its application to an experimental 4D-STEM dataset from an inclined pseudomorphically grown Al0.47Ga0.53N layer.

Niermann, Laura↗

Microstructure and microhardness of an Al-6061 metal matrix composite processed by high-pressure torsion

Disks of an Al-6061 metal matrix composite, reinforced with 10 vol.% Al{sub 2}O{sub 3} particles, were processed by high-pressure torsion (HPT) at room temperature for 1/4, 1/2, 1, 5 and 10 turns under an applied pressure of 6.0 GPa. The evolution of microstructure was investigated using optical microscopy and scanning electron microscopy. During HPT processing the average grain size within the aluminum matrix decreased from ∼ 35 μm in the unprocessed condition to ∼ 170 nm after processing through 10 turns but there was no significant effect on the size and distribution of the alumina particulate clusters. The values of the Vickers microhardness were recorded across the surface of each disk and then plotted as two-dimensional and three-dimensional color-coded contour maps. The results show the hardness increases from ∼ 56 Hv in the initial condition to ∼ 165 Hv after HPT for 10 turns. The results demonstrate that, as in many unreinforced metallic alloys, the evolution of hardness with strain exhibits strain hardening without any significant recovery. - Highlights: •The average grain size of the Al matrix was ~ 170 nm after processing for 10 turns. •No significant effect of HPT on the size and distribution of the Al{sub 2}O{sub 3} particles. •The evolution of microhardness demonstrates strain hardening without recovery. •The microhardness at low strains increases linearly from the center to the edge. •The microhardness at high strains becomes homogeneous with a saturation of ~ 170 Hv.

36 MATERIALS SCIENCE↗

In Situ Synchrotron X-ray Micro-Diffraction Investigation of Elastic Strains in Laminated Ti-Al Composites

Spatially resolved elastic strains in the bulk interior of a laminated Ti-Al metal composite were studied during in situ tensile loading at strains up to 1.66% by a synchrotron-based micro-diffraction technique, namely differential aperture X-ray microscopy (DAXM). For both Al and Ti grains, deviatoric elastic strains were estimated based on polychromatic X-ray microbeam diffraction, while lattice strains along the normal direction of the tensile sample were directly measured using monochromatic X-ray microbeam diffraction. The estimated deviatoric strains show large spatial variations, and the mean values are consistent with the external loading conditions, i.e., increasing tensile strain along the tensile direction and increasing compressive strain along the sample normal with increasing loading. The directly measured lattice strains also show large spatial variations, although the magnitude of this variation is smaller than that for the estimated deviatoric strain. The directly measured lattice strains in Ti grains are largely consistent with the external loading, whereas those in Al grains are in contradiction with the external loading. The causes of the experimental results are discussed and related to both the laminated microstructure of the composite material and the limitations of the techniques.

36 MATERIALS SCIENCE↗

Size-dependent Strain in Epitaxial (001) Gadolinium-doped Ceria Nanoislands

We report size-dependent strain in epitaxial gadolinium doped ceria nanoislands, which was determined by synchrotron x-ray diffraction. Reciprocal space sections of symmetric, (004) and asymmetric, (224) reflections are approximated by a model assuming size-dependent strain of the islands using real-space size distribution obtained by atomic force microscopy. We show that the islands smaller than 40 nm are subjected to a high level of lateral tensile strain and normal compression. The lateral to normal strain ratio determined from the reciprocal map analysis suggests that lateral tension is the primary stress generator, possibly due to oxygen vacancy ordering on the island-substrate interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation in single crystal SrTiO{sub 3} grown on Si (001) by molecular beam epitaxy

An epitaxial layer of SrTiO{sub 3} grown directly on Si may be used as a pseudo-substrate for the integration of perovskite oxides onto silicon. When SrTiO{sub 3} is initially grown on Si (001), it is nominally compressively strained. However, by subsequent annealing in oxygen at elevated temperature, an SiO{sub x} interlayer can be formed which alters the strain state of SrTiO{sub 3}. We report a study of strain relaxation in SrTiO{sub 3} films grown on Si by molecular beam epitaxy as a function of annealing time and oxygen partial pressure. Using a combination of x-ray diffraction, reflection high energy electron diffraction, and transmission electron microscopy, we describe the process of interfacial oxidation and strain relaxation of SrTiO{sub 3} on Si (001). Understanding the process of strain relaxation of SrTiO{sub 3} on silicon will be useful for controlling the SrTiO{sub 3} lattice constant for lattice matching with functional oxide overlayers.

36 MATERIALS SCIENCE↗

Enhanced UV detection by non-polar epitaxial GaN films

Nonpolar a-GaN (11-20) epilayers were grown on r-plane (1-102) sapphire substrates using plasma assisted molecular beam epitaxy. High resolution x-ray diffractometer confirmed the orientation of the grown film. Effect of the Ga/N ratio on the morphology and strain of a-GaN epilayers was compared and the best condition was obtained for the nitrogen flow of 1 sccm. Atomic force microscopy was used to analyze the surface morphology while the strain in the film was quantitatively measured using Raman spectroscopy and qualitatively analyzed by reciprocal space mapping technique. UV photo response of a-GaN film was measured after fabricating a metal-semiconductor-metal structure over the film with gold metal. The external quantum efficiency of the photodetectors fabricated in the (0002) polar and (11-20) nonpolar growth directions were compared in terms of responsivity and nonpolar GaN showed the best sensitivity at the cost of comparatively slow response time.

36 MATERIALS SCIENCE↗

Fabrication of localised aluminium foam by a novel polymeric blowing agent

Highlights: • Polymeric blowing agent used to synthesize metallic foam for first time. • Localised region of a metallic part is foamed. • A novel semisolid route is used to control the pore size of the foams. • Heat-treatable foam with controllable absorption energy is obtained. - Abstract: Closed cell aluminium foams are highly pursued, due to their unique combination of properties. However, the current applicability of the aluminium foams is limited due to issues like high costs, density-gradient and brittleness of the cell walls, which are either related to use of metallic hydride as blowing agent or liquid-state processing. To address these issues, this study presents a first attempt to use polymer as a blowing agent to foam an aluminium alloy. A polymer is Poly (methyl hydro siloxane) was dispersed into an Al2024 sheet of 6 mm by Friction Stir Processing, in a localised region. This processed sample was pyrolysed at temperatures between solidus and liquidus (500–640 °C) of the alloy and at various durations (5–60 min) to foam the localised precursor. The density of resulting foams was measured by the Archemidies method and the resulting pore structures were characterised by Scanning Electron Microscopy (SEM) and micro X-ray Computed Tomography (CT). The results show that by as pyrolysis temperature increases relative density reaches a minimum of 0.65 at 560 °C. Beyond 590 °C, relative density increased from the optimum due to escape of foaming gasses. With increasing pyrolysis temperature, the pore size increased from few microns to several hundred microns. Further, quasi-static compression test was done on as processed, solutionized and aged foams. Due to increased strain hardening in aged samples energy absorbed during compression increased by 80% in the plateau region. Hence, polymeric a blowing agent can be used to synthesize heat-treatable foams with controllable absorption energy.

36 MATERIALS SCIENCE↗

A co-precipitation preparation, crystal structure and photoluminescent properties of Er5%:Gd{sub 2}O{sub 3} nanorods

An inexpensive preparation method is being reported for obtaining erbium doped gadolinium oxide (Er5%:Gd{sub 2}O{sub 3}) nanoscale rods. The elongated nanoscale systems, as-formed through a co-precipitation process, are characterized by using X-ray powder diffraction (XRD) patterns, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) mapping, Ultra Violet-visible (UV-vis.) absorption spectroscopy and photoluminescence (PL) spectroscopy. In addition, the Williamson–Hall (W–H) plot is also performed to distinguish the effect of crystalline size-induced broadening and strain-induced broadening at full-width at half-maximum (FWHM) of the XRD profile. The XRD patterns of as-formed and calcined products show that the phase confirmation. As revealed from the SEM micrographs, the morphology of the products show that the rod-like nanoparticles. The EDX micrographs show that the presence of elements in our samples. The band gap values in calcined samples are found to be in the range of 3.569 eV. Upon 230 nm excitation on calcined samples, three broad emission peaks are observed from PL studies. The possible mechanism for the formation of Er5%:Gd{sub 2}O{sub 3} nanorods is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of the lateral ordering of self-assembled SiGe nanoislands grown on strained Si{sub 1-x}Ge{sub x} buffer layers

Atomic-force microscopy, micro-Raman spectroscopy, and high resolution X-ray diffraction are applied to study the spatial ordering in single layers of SiGe nanoislands grown on a strained Si{sub 1-x}Ge{sub x} buffer sublayer. It is shown that, apart from stimulating the spatial ordering of nanoislands, the introduction of a Si{sub 1-x}Ge{sub x} sublayer leads to an enhanced role for interdiffusion processes. An unusually high increase in the volume of nanoislands in the process of the epitaxy is related to the anomalously strong diffusion from the buffer sublayer into the islands that is induced by nonuniform fields of elastic strains. The anisotropy of the islands shape and spatial ordering is discussed in terms of the anisotropy of the diffusion processes in spatially nonuniform fields of elastic strains.

36 MATERIALS SCIENCE↗

Strain release through hydrogen bond–mediated layer twisting

Strain engineering, enabling the precise control over structure and functional properties, is a key strategy for the design of advanced materials. However, the mechanisms governing strain evolution and release at the nanoscale remain largely unexplored. In this study, we leverage in situ heating transmission electron microscopy and synchrotron x-ray spectroscopy to investigate the strain relaxation pathways of boehmite (γ-AlOOH) at 575 kelvin by revealing real-time structural dynamics. Through tracking the moiré pattern evolution, we identify distinct strain release mechanisms, including layer twisting, defect formation, and domain restructuring. Our neural network potential calculations reveal that energy fluctuations at small twist angles are dominated by an interference-like interaction modulation of hydrogen bonds between boehmite interlayers, with metastable twisted structures corresponding to local minima of the potential energy landscape. This work establishes a previously unidentified paradigm of two-dimensional layer twisting mediated by hydrogen bonding, offering insights into strain-driven transformation mechanisms, and thus may have broad implications for strain in material and earth sciences.

36 MATERIALS SCIENCE↗

Mapping strain gradients in the FIB-structured InGaN/GaN multilayered films with 3D x-ray microbeam.

This research presents a combined experimental-modeling study of lattice rotations and deviatoric strain gradients induced by focused-ion beam (FIB) milling in nitride heterostructures. 3D X-ray polychromatic microdiffraction (PXM) is used to map the local lattice orientation distribution in FIB-structured areas. Results are discussed in connection with microphotoluminescence ({mu}-PL), fluorescent analysis, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) data. It is demonstrated that FIB-milling causes both direct and indirect damage to the InGaN/GaN layers. In films subjected to direct ion beam impact, a narrow amorphidized top layer is formed. Near the milling area, FIB-induced stress relaxation and formation of complicated 3D strain fields are observed. The resulting lattice orientation changes are found to correlate with a decrease and/or loss of PL intensity, and agree well with finite element simulations of the three-dimensional strain fields near the relaxed trenches. Experimentally, it is found that the lattice surface normal has an in-plane rotation, which only appears in simulations when the GaN-substrate lattice mismatch annihilates the InGaN-substrate mismatch. This behavior further supports the notion that the film/substrate interface is incoherent.

36 MATERIALS SCIENCE↗