Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stacking faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Synthesis and characterization of O3-Na{sub 3}LiFeSbO{sub 6}: A new honeycomb ordered layered oxide

Highlights: • A new honeycomb ordered layered oxide Na{sub 3}LiFeSbO{sub 6} was synthesized. • This compound crystallizes in the C2/c space group. • Disorder in the honeycomb arrangement of Li and Fe is present. - Abstract: A new compound Na{sub 3}LiFeSbO{sub 6} has been synthesized by conventional solid state methods and investigated using X-ray diffraction, DC magnetic susceptibility, {sup 57}Fe Mössbauer spectroscopy and optical measurements. This compound crystallizes in a monoclinic unit cell and is related to a family of honeycomb ordered layered oxide materials where Na{sup +} fills octahedral interlayer sites between Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs of edge sharing octahedra. Each SbO{sub 6} octahedron is surrounded by LiO{sub 6} and FeO{sub 6} octahedra creating a honeycomb arrangement within the slabs. Powder X-ray diffraction indicates the presence of stacking faults. This compound exhibits Curie–Weiss behavior at high temperatures and the effective magnetic moment verifies the presence of high spin Fe{sup 3+}. The {sup 57}Fe Mössbauer spectroscopy confirms Fe{sup 3+} in an octahedral position and indicates disorder in the arrangement of LiO{sub 6} and FeO{sub 6} octahedra in the Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs.

36 MATERIALS SCIENCE↗

Tracking defect type and strain relaxation in patterned Ge/Si(001) islands by x-ray forbidden reflection analysis

Plastic relaxation and formation of defects are crucial issues in the epitaxial growth of nanoparticles and thin films. Indeed, defects generate local stress in the crystalline lattice, which affects their surroundings and may lead to undesired effects such as reduced charge-carrier lifetime or nonradiative recombinations. Here, we use a nondestructive method based on x-ray diffuse scattering close to forbidden reflections to identify the defect types with a high sensitivity and quantify their average size and strain field. Combined with transmission electron microscopy, it offers opportunities to track both ensemble average and single defects inside three-dimensional structures. These techniques have been applied to partially embedded and high-Ge-content (x{sub Ge}=0.87{+-}0.06) dots selectively grown in 20-nm-sized pits on Si(001) surfaces through openings in a SiO{sub 2} template. The stress in the 20-nm-wide Ge islands is relaxed not only by interfacial dislocations but also by microtwins and/or stacking faults located at the interface, proving the importance of {l_brace}111{r_brace} planes and twinning in the relaxation process of nanometer-size Ge dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective area growth and characterization of GaN nanocolumns, with and without an InGaN insertion, on semi-polar (11–22) GaN templates

The aim of this work is the selective area growth (SAG) of GaN nanocolumns, with and without an InGaN insertion, by molecular beam epitaxyon semi-polar (11–22) GaN templates. The high density of stacking faults present in the template is strongly reduced after SAG. A dominant sharp photoluminescence emission at 3.473 eV points to high quality strain-free material. When embedding an InGaN insertion into the ordered GaN nanostructures, very homogeneous optical properties are observed, with two emissions originating from different regions of each nanostructure, most likely related to different In contents on different crystallographic planes.

36 MATERIALS SCIENCE↗

Structure of the Fe-Mn-Si alloys submitted to γ ↔ ε thermocycling

Highlights: • The effect of thermal cycling Fe–Mn–Si alloys is studied. • In situ neutron diffraction, internal friction, DSC and TEM results are analysed. • Lattice defects accumulation both in martensitic and austenitic phases. • Microstrains in the γ and ε phases are estimated. - Abstract: The accumulation of defects and internal stresses and related changes of the direct and reverse martensitic transition (MT) on thermocycling over the phase transition in different Fe–Mn–Si alloys are investigated by in situ neutron diffraction, TEM, SEM-EBSD, DSC and mechanical spectroscopy. The temperature of direct MT in Fe-22Mn-3Si, Fe-26Mn-4Si and Fe-26Mn-7Si alloys decreases during thermal cycling, while that of the inverse MT increases, which causes a widening of the transformation hysteresis. Transmission electron microscopy shows that a large number of dislocations and stacking faults are formed in both martensitic and austenitic phases in the Fe-22Mn-3Si annealed alloy submitted to γ ↔ ε thermocycling. From in situ neutron diffraction tests on Fe-22Mn-3Si annealed alloy and classical Williamson-Hall analysis, we found that the microstrains in the ε-martensite after 1 and 12 thermocycles are roughly twice higher as compared with the austenite phase.

36 MATERIALS SCIENCE↗

Core structures analyses of (a+c)-edge dislocations in wurtzite GaN through atomistic simulations and Peierls–Nabarro model

The core structures and slip characteristics of (a+c)-edge dislocations on pyramidal planes in wurtzite GaN were investigated employing molecular dynamics simulations. Multiple stable core configurations are identified for dislocations along the glide and shuffle planes. The corresponding generalized-stacking-fault energy (GSFE) curves for the glide and shuffle slips are calculated. The GSFE curves, combined with the Peierls–Nabarro model, demonstrate that the shuffle slip is favored over the glide slip given the markedly lower Peierls energy and stress of the shuffle slip. Our findings also indicate that in general slip motions for (a+c)-edge dislocations are only possible at elevated temperature, and the necessity of further studies of thermally activated processes to better understand the dynamics of (a+c) dislocations in GaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control and elimination of nucleation-related defects in GaP/Si(001) heteroepitaxy

GaP films were grown on offcut Si(001) substrates using migration enhanced epitaxy nucleation followed by molecular beam epitaxy, with the intent of controlling and eliminating the formation of heterovalent (III-V/IV) nucleation-related defects--antiphase domains, stacking faults, and microtwins. Analysis of these films via reflection high-energy electron diffraction, atomic force microscopy, and both cross-sectional and plan-view transmission electron microscopies indicate high-quality GaP layers on Si that portend a virtual GaP substrate technology, in which the aforementioned extended defects are simultaneously eliminated. The only prevalent remaining defects are the expected misfit dislocations due to the GaP-Si lattice mismatch.

36 MATERIALS SCIENCE↗

Structural anisotropy of nonpolar and semipolar InN epitaxial layers

We present a detailed study of the structural characteristics of molecular beam epitaxy grown nonpolar InN films with a- and m-plane surface orientations on r-plane sapphire and (100) {gamma}-LiAlO{sub 2}, respectively, and semipolar (1011) InN grown on r-plane sapphire. The on-axis rocking curve (RC) widths were found to exhibit anisotropic dependence on the azimuth angle with minima at InN [0001] for the a-plane films, and maxima at InN [0001] for the m-plane and semipolar films. The different contributions to the RC broadening are analyzed and discussed. The finite size of the crystallites and extended defects are suggested to be the dominant factors determining the RC anisotropy in a-plane InN, while surface roughness and curvature could not play a major role. Furthermore, strategy to reduce the anisotropy and magnitude of the tilt and minimize defect densities in a-plane InN films is suggested. In contrast to the nonpolar films, the semipolar InN was found to contain two domains nucleating on zinc-blende InN(111)A and InN(111)B faces. These two wurtzite domains develop with different growth rates, which was suggested to be a consequence of their different polarity. Both, a- and m-plane InN films have basal stacking fault densities similar or even lower compared to nonpolar InN grown on free-standing GaN substrates, indicating good prospects of heteroepitaxy on foreign substrates for the growth of InN-based devices.

36 MATERIALS SCIENCE↗

Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and CoCrFeMnNi High-Entropy Alloys

High-entropy alloys (HEAs), a novel class of metal alloys, have been receiving increasing attention from the scientific community. HEAs have the potential to be used in critical load-bearing applications in replacement of conventional alloys such as stainless steel and nickel-base superalloys. Tensile experiments at quasi-static to dynamic strain rates (10{sup −4}-10{sup 3} s{sup −1}) were performed on two single-phase face-centered cubic HEAs, CoCrFeNi and CoCrFeMnNi. Electron backscatter diffraction was used to study the microstructure of the samples before the experiments, and transmission electron microscopy was performed postmortem. The dominant deformation mechanisms were dislocation slip at quasi-static strain rates with the addition of deformation nano-twins at dynamic strain rates. Ultimate dynamic tensile strength and ductility improved with the increase in strain rate, which can be attributed to the activation of deformation nano-twins in HEAs. CoCrFeNi and CoCrFeMnNi both have low stacking fault energies, which could promote twinning at high strain rates to accommodate plastic deformation. The strain rate sensitivity of the flow stress increased with increasing strain rate, beginning with negligible strain rate sensitivity in the quasi-static range to high strain rate sensitivity in the dynamic range. CoCrFeMnNi showed greater strain rate sensitivity of flow stress. CoCrFeNi, with less configurational entropy, had higher mechanical properties and strain-hardening rates compared to CoCrFeMnNi, which was attributed to the weakening effect of the addition of Mn on the solid solution hardening.

36 MATERIALS SCIENCE↗

Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides

The metallic binder phase dictates the toughening behavior of WC-Co cemented carbides (hardmetals), even though it occupies a relative small fraction of the composite. Studies on deformation and phase transformation of the binder constituent are scarce. Grinding represents a key manufacturing step in machining of hardmetal tools, and is well-recognized to induce surface integrity alterations. In this work, metallurgical alterations of the binder phase in ground WC-Co cemented carbides have been assessed by a combination of electron back scattered diffraction and transmission electron microscopy techniques. The Co-base binder experiences a martensitic phase transformation from fcc to hcp crystal structure, predominantly in the first 5 μm below the surface. The hcp fraction decreases gradually along a depth of 10 μm. Surface Co displays severe plastic deformation under the highest strain, resulting in formation of nanocrystalline grains in the first micrometer below the surface. Microstructural refinement within the binder phase is observed even at greater depth. Stacking faults were detected in most of the refined grains. The metallurgical alterations of the binder phase modify the local stress distribution during grinding, which affects the discerned subsurface microcracking. The resulting residual stress profile is the sum of multiple subsurface changes, such as phase transformation, severe plastic deformation and grain refinement, where it is discerned that the depth profile of the transformed hcp-Co fraction coincides with the grinding-induced residual stress profile.

36 MATERIALS SCIENCE↗

Phase instability and defect induced evolution of optical properties in Cd rich-CdS nanoparticles

Although semiconductor nanostructures exhibit improved physical properties, their structural instability is be a problem for technological applications. This paper reports a temperature-induced low energy phase transformation that occurs in CdS nanoparticles which is ascribed to thermally generated stacking-faults. The phase transformation is found to change the nature of lattice strain in the samples. The formation of this defect-induced lattice strain and its influence on the physical properties of the samples are investigated. The modified optical absorption and emission properties of the samples are thoroughly studied. Using resonance Raman spectroscopy, the evolution of electron-phonon (e-p) coupling strength with structural changes is studied. An explanation to the contradictory nature of e-p coupling strength observed in the nano-regime is given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bond-Order Potential for Erbium-Hydride System

Interatomic potentials for an Er-H system are derived based on an analytical bond-order scheme. The model potentials provide a good description of the bulk properties and defect properties of hcp-Er, including lattice parameter, cohesive energy, elastic constants, point defect formation energies, surface and stacking fault energies. In addition to experimental data, a DFT method is used to construct the necessary database of different phases. We demonstrate that such potentials can reproduce the hydrogen behaviour in an alpha-phase Er-H system for a low hydrogen/metal ratio. Especially, the present potentials can be employed for modelling the energetics and structural properties of fcc ErH2, including lattice parameters, elastic constants, bulk modulus, Young's modulus and shear modulus, as well as the formation energies and migration barriers of point defects in ErH2.

08 HYDROGEN↗

Role of Alloy Chemistry on Stability of Passive Films in Austenitic Stainless Steel

This study dealt with characterizing oxide passive films in austenitic stainless steels with different chemical compositions. Stacking fault energy was estimated, and thermal conductivity at different temperatures (298, 673, 873 and 1073 K) were calculated. Steels specimens were plane strain compressed and subjected to anodic potentiodynamic polarization scan in a different deaerated testing environment. The deformed specimens were characterized using electron backscattered diffraction system and Fourier transform infrared spectroscopy (FTIR)-imaging. The Cr{sub 2}O{sub 3} peak from FTIR-imaging was captured, and area of the peak was calculated after anodic potentiodynamic polarization scan. The intensity of Cr{sub 2}O{sub 3} peak was related to deformed microstructural features.

36 MATERIALS SCIENCE↗

Synchrotron X-ray Topographic Studies of Recombination Activated Shockley Partial Dislocations in 4H-SiC Epitaxial Layers

Electron-hole recombination activated Shockley partial dislocations bounding expanding stacking faults and their interactions with threading dislocations have been studied in 4H-SiC epitaxial layers using synchrotron x-ray topography. The bounding partials appear as white stripes or narrow dark lines in back-reflection X-ray topographs recorded using the basal plane reflections. Such contrast variations are attributable to the defocusing/focusing of the diffracted X-rays due to the edge component of the partial dislocations, which creates a convex/concave distortion of the basal planes. Simulation results based on the ray-tracing principle confirm our argument. The sign of the partial dislocations can be subsequently determined.

43 PARTICLE ACCELERATORS↗

Irradiation response and stability of nanoporous materials

Nanoporous materials consist of a regular organic or inorganic framework supporting a regular, porous structure. Pores are by definition roughly in the nanometre range, that is between 0.2 nm and 100 nm. Nanoporous materials can be subdivided into 3 categories (IUPAC): (1) Microporous materials - 0.2-2 nm; (2) Mesoporous materials - 2-50 nm; and (3) Macroporous materials - 50-1000 nm. np-Au foams were successfully synthesized by de-alloying process. np-Au foams remain porous structure after Ne ion irradiation to 1 dpa. Stacking Fault Tetrahedra (SFTs) were observed in RT irradiated np-Au foams under the highest and intermediate fluxes, but not under the lowest flux. SFTs were not observed in LNT irradiated np-Au foams under all fluxes. The vacancy diffusivity in Au at RT is high enough so that the vacancies have enough time to agglomerate and then collapse to form SFTs. The high ion flux creates more damage per unit time; vacancies don't have enough time to diffuse or recombine. As a result, SFTs were formed at high ion fluxes.

36 MATERIALS SCIENCE↗

InAs/GaAs quantum dots on GaAs-on-V-grooved-Si substrate with high optical quality in the 1.3 μm band

We report self-assembled InAs/GaAs quantum dots (QDs) grown on a specially engineered GaAs-on-V-grooved-Si substrate by metal-organic vapor phase epitaxy. Recessed pockets formed on V-groove patterned Si (001) substrates were used to prevent most of the hetero-interfacial stacking faults from extending into the upper QD active region. 1.3 μm room temperature emission from high-density (5.6 × 10{sup 10 }cm{sup −2}) QDs has been obtained, with a narrow full-width-at-half-maximum of 29 meV. Optical quality of the QDs was found to be better than those grown on conventional planar offcut Si templates, as indicated by temperature-dependent photoluminescence analysis. Results suggest great potential to integrate QD lasers on a Si complementary-metal-oxide-semiconductor compatible platform using such GaAs on Si templates.

36 MATERIALS SCIENCE↗

Order-parameter-aided temperature-accelerated sampling for the exploration of crystal polymorphism and solid-liquid phase transitions

The problem of predicting polymorphism in atomic and molecular crystals constitutes a significant challenge both experimentally and theoretically. From the theoretical viewpoint, polymorphism prediction falls into the general class of problems characterized by an underlying rough energy landscape, and consequently, free energy based enhanced sampling approaches can be brought to bear on the problem. In this paper, we build on a scheme previously introduced by two of the authors in which the lengths and angles of the supercell are targeted for enhanced sampling via temperature accelerated adiabatic free energy dynamics [T. Q. Yu and M. E. Tuckerman, Phys. Rev. Lett. 107, 015701 (2011)]. Here, that framework is expanded to include general order parameters that distinguish different crystalline arrangements as target collective variables for enhanced sampling. The resulting free energy surface, being of quite high dimension, is nontrivial to reconstruct, and we discuss one particular strategy for performing the free energy analysis. The method is applied to the study of polymorphism in xenon crystals at high pressure and temperature using the Steinhardt order parameters without and with the supercell included in the set of collective variables. The expected fcc and bcc structures are obtained, and when the supercell parameters are included as collective variables, we also find several new structures, including fcc states with hcp stacking faults. We also apply the new method to the solid-liquid phase transition in copper at 1300 K using the same Steinhardt order parameters. Our method is able to melt and refreeze the system repeatedly, and the free energy profile can be obtained with high efficiency.

36 MATERIALS SCIENCE↗

EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy

Highlights: • Similar deformation structures are obtained for surface and bulk grains. • A lower strain is needed for twinning in surface grains than in bulk grains. • A reduced ability to cross-slip due to low SFE leads to an increasing LAB density. • Twinning reduces the dislocation slip length. • High strain-hardening rate is maintained up to high strains. - Abstract: The microstructure evolution in both surface and bulk grains in a pure Fe-19Cr-12Ni alloy has been analyzed using electron backscatter diffraction after tensile testing interrupted at different strains. Surface grains were studied during in situ tensile testing performed in a scanning electron microscope, whereas bulk grains were studied after conventional tensile testing. The evolution of the deformation structure in surface and bulk grains displays a strong resemblance but the strain needed to obtain a similar deformation structure is lower in the case of surface grains. Both slip and twinning are observed to be important deformation mechanisms, whereas deformation-induced martensite formation is of minor importance. Since the stacking fault energy (SFE) is low, ~17 mJ/m{sup 2}, dynamic recovery by cross slip of un-dissociated dislocations is unfavorable. This reduces the annihilation of dislocations which in turn leads to a significant increase of low angle boundaries with increasing strain. The low SFE also favors formation of deformation twins which reduces the slip distance, leading to a hardening similar to the Hall-Petch relation. The combination of a low ability for cross-slip and a reduced slip distance caused by twinning is concluded to be the main reason for maintaining a high strain-hardening rate up to strains close to necking.

36 MATERIALS SCIENCE↗

Electron-beam-induced current and cathodoluminescence study of dislocation arrays in 4H-SiC homoepitaxial layers

The electrical and optical properties of dislocation arrays (DAs) in 4H-SiC homoepitaxial layers were studied by using electron-beam-induced current (EBIC) and cathodoluminescence (CL) techniques. EBIC observations show that under electron-beam irradiation, the DAs are easily dissociated to form rhombic stacking faults (SFs), whereas the single threading dislocations are not. CL results demonstrate that a new peak (417 nm) appears at the formed SFs, which is the same as the phenomenon observed from dissociating basal plane dislocations. The dissociation mechanisms of DAs are proposed based on the assumption that small basal segments exist. The dissociation velocity of each dislocation in the DAs is discussed according to its recombination activity.

36 MATERIALS SCIENCE↗