Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Snow model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Shrub Heights at the Teller 27 and Kougarok 64 Field Sites, Seward Peninsula, Alaska, 2021

As shrubs become more widespread across the Arctic, there is increasing focus on their influence over snow accumulation and soil moisture. To better characterize shrub heights based on landscape position, proximity to surface waters, and species, shrub heights were measured with a differential GPS (dGPS) at the Teller 27 and Kougarok 64 field sites on the Seward Peninsula, Alaska. Measurements were collected between September 12th through 16th, 2021. Shrub heights were calculated by subtracting the maximum height of the canopy from the ground elevation. Some of the shrub heights collected were co-located with iButton (i.e., K45, B8) and Tiny Tag (i.e., TT10) sensors in dataset NGA296. Other shrub heights and species were measured in a dense 20 m x 20 m plot to understand shrub density, species composition, and heights. This dataset contains a .csv file of ground elevations and shrub heights of shrubs throughout the Teller 27 and Kougarok 64 sites.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Machine Learning Enabled Sensor Fusion for In-Situ Defect Detection in Laser Powder Bed Fusion

Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) is among the metal 3D printing technologies most broadly adopted by the manufacturing industry. The current industry qualification paradigm for critical-application L-PBF parts relies heavily on expensive non-destructive inspection techniques such as X-Ray Computed Tomography (XCT), which significantly limits the use-cases of L-PBF. In situ monitoring of the process promises a less expensive alternative to ex situ testing, but existing sensor technologies and data analysis techniques struggle to detect sub-surface flaws (e.g., porosity and cracking) on production-scale L-PBF printers. RTX Technologies Research Center (RTRC) has licensed ORNL’s Peregrine software package – a printer- and camera-agnostic data analytics tool designed specifically for detecting process anomalies using in situ data collected during powder bed printing. The goal of this project was to feed temporally rich, multi-modal sensor data, including visible light, integrated near infrared (NIR), and spatially mapped co-axial melt pool thermal emission data into Peregrine to enable detection of subsurface flaws. XCT data was used as ground truth training data to allow Peregrine’s deep learning algorithms to recognize anomalies in these complex data streams in both test artifacts and industrially relevant geometries. Completion of this program has seen the successful implementation of multi-modal, multi-layer sensor data footprints for training of machine learning models in Peregrine. Flaws detected in XCT data have been successfully detected directly from this in situ data footprint, and initial analyses of the in situ probability-of-detection has been conducted, showing performance levels commensurate with traditional non-destructive evaluation (NDE) methods. The in situ monitoring methodology was then applied to an industrially relevant component that was using post-build NDE, highlighting the utility of the proposed method for hard-to-inspect AM components. As a direct result of this program, two journal manuscripts [1], [2] have been published in Additive Manufacturing, with additional manuscripts planned following program completion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stability Functions in the Stable Surface Layer Derived from the Mellor–Yamada–Nakanishi–Niino (MYNN) Scheme

It is desirable that a surface layer scheme in an atmospheric numerical model is consistent with an atmospheric boundary layer scheme incorporated in the same model. In this study, stability functions based on Monin–Obukhov similarity theory for momentum and heat, φ m and φ h , in the stable surface layer are derived from the Mellor–Yamada–Nakanishi–Niino (MYNN) scheme. The resulting stability functions are approximated by φ m = 1 + 4.8z/L and φ h = 0.74 + 6.0z/L, which can be analytically integrated with respect to height z to obtain momentum and heat fluxes, where L is the Obukhov length. The fluxes thus, obtained are compared with those acquired from stability functions in four previous studies: they are nearly the same as those from two of them, and show better agreement with observational data of the Surface Heat Budget of the Arctic Ocean experiment (SHEBA) over sea ice than those from the other two studies. Detailed comparisons of the results of the MYNN scheme with the SHEBA data suggest that significant variations of the fluxes observed during “winter” when the ice was covered with dry snow may have been caused by those of the surface roughness around the observational site. The stability functions obtained from the MYNN scheme predict that the bulk and flux Richardson numbers approach critical values of 0.26 and 0.21, respectively, in the limit of z/L → ∞. These critical values result from the Kolmogorov hypothesis applied to the turbulent dissipation in the MYNN scheme and are considered to correspond to a transition from Kolmogorov to non-Kolmogorov turbulence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Hybrid predictive modeling approach simulated evapotranspiration and ecosystem respiration data

This dataset includes measured data used for developing hybrid-predictive-modeling (HPM) approach and simulated evapotranspiration and ecosystem respiration data across several Fluxnet sites, SNOTEL sites and East River locations (Chen et al., 2020 in review). Fluxnet sites considered in this study include: CA-OAS, CA-OBS, US-NR1, US-TON, US-VAR, US-SRM, US-WHS, US-WKG. Snotel sites Butte (ER-BT), Porphyry Creek (ER-PK) and Schofield Pass (ER-SP) are included as well 16 east river locations with different vegetation types denoted by evergreen forests (EF), deciduous forests (DF), riparian shrublands (RS) and meadow grassland (MS). This data package includes: 1) A summary spread sheet of the sites and acronyms for data variables. 2) Processed Fluxnet datasets that are obtained from Fluxnet.fluxdata.org with HPM estimated evapotranspiration (ET) and ecosystem respiration (RECO). Trained models and metrics for parameters for the Fluxnet sites were added in an update on November 2, 2020; 3) Processed SNOTEL datasets obtained from www.nrcs.usda.gov/snow/ and HPM estimated ET and RECO; 4) Weather data at east river locations obtained from DAYMET (daymet.ornl.gov) as well as HPM estimated ET and RECO. NDVI datasets are obtained from Landsat 5, 7 and 8 on Google Earth Engine platform. Detailed QA/QC and sampling methods of measured data are available at the original data source.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Distributed Temperature Profiling System for Vertically and Laterally Dense Acquisition of Soil and Snow Temperature: Supporting Data

This dataset was used to assess the potential of a Distributed Temperature Profiling System developed and presented in the article named "A Distributed Temperature Profiling System for Vertically and Laterally Dense Acquisition of Soil and Snow Temperature" and submitted to Cryosphere. There are three comma-delimited data files (.csv). Each of them contains snow or soil temperature with times (UTC) in the first column and temperature at various vertical distance from the ground surface (positive means in air/snow) or below the ground surface (negative means in soil). The measurements were acquired every 15 minutes. Data collected at the East River, Colorado site with two probes: 1) measuring air/snow temperature from 1.1 m above the ground surface to the ground surface (with 5 or 10 cm spacing between sensors) and 2) measuring soil temperature from the ground surface to 0.7 m depth (with 5 or 10 cm spacing between sensors). Data collected at the Teller road (mile 27) site near Nome, Alaska with one probe: measuring soil temperature from 5 cm above the ground surface to 1.05 m depth (with 5 or 10 cm spacing between sensors). Additional metadata included in *.csv and *.pdf files. NGEE Arctic Project Summary: The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Algorithmically detected rain-on-snow flood events in different climate datasets: a case study of the Susquehanna River basin

Abstract. Rain-on-snow (RoS) events in regions of ephemeral snowpack – such as the northeastern United States – can be key drivers of cool-season flooding. We describe an automated algorithm for detecting basin-scale RoS events in gridded climate data by generating an area-averaged time series and then searching for periods of concurrent precipitation, surface runoff, and snowmelt exceeding predefined thresholds. When evaluated using historical data over the Susquehanna River basin (SRB), the technique credibly finds RoS events in published literature and flags events that are followed by anomalously high streamflow as measured by gauge data along the river. When comparing four different datasets representing the same 21-year period, we find large differences in RoS event magnitude and frequency, primarily driven by differences in estimated surface runoff and snowmelt. Using dataset-specific thresholds improves agreement between datasets but does not account for all discrepancies. We show that factors such as meteorological forcing and coupling frequency, as well as choice of land surface model, play roles in how data products capture these compound extremes and suggest care is to be taken when climate datasets are used by stakeholders for operational decision-making.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

On the Role of Macrophysics and Microphysics in Km-Scale Simulations of Mixed-Phase Clouds During Cold Air Outbreaks

Regional atmospheric models struggle to maintain supercooled liquid in mixed-phase clouds during polar cold-air outbreaks (CAOs). Previous studies focused on the parameterization of aerosol, microphysics and turbulence to understand the origin of this widespread model bias. This study investigates the role of sub-grid cloud fraction parameterizations (CFP) in the simulation of mixed-phase cloud. Km-scale simulations are performed for a large number of CAO cases over Norway, for which continuous ground observations were collected at one site over 6 months. We use a novel analysis that attributes the cloud-radiative errors to deficiencies in specific cloud regimes. We show that the CFP matters for cloud-radiative effects in CAOs, but that it is probably not the primary cause of the lack of liquid water in simulated mixed-phase clouds. Of all the CFP sensitivities explored in this study, the prognostic representation of both liquid and ice shows most promise in increasing the liquid water path. A newly proposed hybrid CFP with prognostic frozen and diagnostic liquid cloud fraction reproduces some of the benefits of the prognostic scheme at reduced cost and complexity. All simulations appear to produce too large precipitation particles. As a result, reducing the snow deposition rate increases the liquid water path and improves the precipitation size distributions, while simulations are less sensitive to reduced riming rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Data from: "Warming and the dependence of limber pine (Pinus flexilis) establishment on summer soil moisture within and above its current elevation range"

This data package contains data that were used for analysis in “Warming and the dependence of limber pine (Pinus flexilis) establishment on summer soil moisture within and above its current elevation range”, by Moyes et al. 2013. All data collection and field research were completed on Niwot Ridge, Colorado, USA.This data package contains nine comma-separated-values (.csv) files, one text (.txt) file, and two zipped seedling folders that were used for leaf area analysis. One zipped folder contains 468 .jpg photographs of seedlings, and the second contains 468 corresponding Image J-processed .jpg images that include silhouette leaf area values. .csv and .txt files can be opened using any compatible simple text-editor software such as TextEdit (Mac) and Notepad (Windows); .csv’s can also be opened using R and Microsoft Excel. Image files can be opened using Preview (Mac) and Photos (Windows). In addition, there are a total of 31 Microsoft Excel files: three .xlsx files, and 28 raw Li-Cor output .xls files. This data user’s guide is available in .pdf format, and can be opened using Adobe Acrobat Reader, or any other compatible file viewing software. Geospatial data showing field site locations are also included in the archive for use and reference. There are two geospatial formats in this archive: ESRI shapefiles (.shp) and keyhole markup-language (.kml) files. Both file types contain bounding box information, with the former being polygons, and the latter containing corner coordinates for each site. ESRI shapefiles can be opened using any geospatial software compatible with the file type (such as ESRI’s ArcGIS suite and QGIS), and .kml files are compatible with Google Earth and Google Maps.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Continued changes in climate are projected to alter the geographic distributions of plant species, in part by affecting where individuals can establish from seed. We tested the hypothesis that warming promotes uphill redistribution of subalpine tree populations by reducing cold limitation at high elevation and enhancing drought stress at low elevation. We seeded limber pine (Pinus flexilis) into plots with combinations of infrared heating and water addition treatments, at sites positioned in lower subalpine forest, the treeline ecotone, and alpine tundra. In 2010, first-year seedlings were assessed for physiological performance and survival over the snow-free growing season. Seedlings emerged in midsummer, about 5–8 weeks after snowmelt. Low temperature was not observed to limit seedling photosynthesis or respiration between emergence and October, and thus experimental warming did not appear to reduce cold limitation at high elevation. Instead, gas exchange and water potential from all sites indicated a prevailing effect of summer moisture stress on photosynthesis and carbon balance. Infrared heaters raised soil growing degree days (base 5 °C, p < 0.001) and August–September mean soil temperature (p < 0.001). Despite marked differences in vegetation cover and meteorological conditions across sites, volumetric soil moisture content (θ) at 5–10 cm below 0.16 and 0.08 m^3 m^(−3) consistently corresponded with moderate and severe indications of drought stress in midday stem water potential, stomatal conductance, photosynthesis, and respiration. Seedling survival was greater in watered plots than in heated plots (p = 0.01), and negatively related to soil growing degree days and duration of exposure to θ < 0.08 m^3 m^(−3) in a stepwise linear regression model (p < 0.0001). We concluded that seasonal moisture stress and high soil surface temperature imposed a strong limitation to limber pine seedling establishment across a broad elevation gradient, including at treeline, and that these limitations are likely to be enhanced by further climate warming.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Maintenance log:Amended file name error in Data User's Guide May 19 2022

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Retrospective and Prospective Examination of the 1960s U.S. Northeast Drought

As the most severe drought over the Northeastern United States (NEUS) in the past century, the 1960s drought had pronounced socioeconomic impacts. Although it was followed by a persisting wet period, the conditions leading to the 1960s extreme drought could return in the future, along with its challenges to water management. To project the potential consequences of such a future drought, pseudo-global warming simulations using the Weather Research and Forecasting Model are performed to simulate the dynamical conditions of the historical 1960s drought, but with modified thermodynamic conditions under the shared socioeconomic pathway SSP585 scenario in the early (2021–2027), middle (2041–2047), and late (2091–2097) 21st century. Our analysis focuses on essential hydroclimatic variables including temperature, precipitation, evapotranspiration, soil moisture, snowpack, and surface runoff. In contrast to the historical 1960s drought, similar dynamical conditions will generally produce more precipitation, increased soil moisture and evapotranspiration, and reduced snowpack. However, we also find that although wet months get much wetter, dry months may become drier, meaning that wetting trends are most significant in wet months but are essentially negligible for extremely dry months with negative monthly mean net precipitation. For these months, the trend toward wetting conditions provides little relief from the effects of extreme dry months. These conditions may even aggravate water shortages due to an increasingly rapid transition from wet to dry conditions. Other challenges emerge for residents and stakeholders in this region, including more extreme hot days, record-low snow pack, frozen ground degradation and subsequent decreases in surface runoff.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Multiple Environmental Influences on the Lightning of Cold-Based Continental Convection. Part II: Sensitivity Tests for Its Charge Structure and Land–Ocean Contrast

In Part I, an electrification scheme was described and a simulation of an observed cold-based storm from the U.S. Great Plains was validated with electrical observations. Most charge in the storm was separated by rebounding collisions of secondary ice originating from prior graupel–snow collisions. In this Part II, sensitivity tests are performed with the control simulation (Part I) and influences from environmental factors (aerosols, temperature, moisture, and shear) on lightning are elucidated. Environmental factors [e.g., convective available potential energy (CAPE)] controlling updraft speed are salient. When ascent is reduced by 30% and 70%, flashes become 70% fewer and disappear, respectively; faster ascent promotes positive cloud-to-ground (+CGs) flashes. Since cloud base is too cold (1°C) for coalescence, cloud condensation nucleus aerosol concentrations do not influence the lightning appreciably. The electrical response to varying concentrations of active ice nuclei is limited by most ice particles being secondary and less sensitive—a natural “buffer.” Imposing a maritime sounding suggests that the land–sea contrast in lightning for such storms is due to the vertical structure of environmental temperature and humidity. Weak CAPE, and both entrainment and condensate weight from a low cloud base, suppress ascent and charging. Maritime thermodynamic conditions reduce simulated flash rates by two orders of magnitude. Reducing aerosol loadings from continental to maritime only slightly reinforces this suppression. Last, a conceptual model is provided for how any simulated storm is either normal because graupel/hail is mostly positively charged or else is inverted/anomalous because graupel/hail is mostly negatively charged, with environmental factors controlling the charging. Impacts from microphysical processes, including three processes of secondary ice production, on lightning are analyzed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Surface temperature comparison of the Arctic winter MOSAiC observations, ERA5 reanalysis, and MODIS satellite retrieval

Atmospheric model systems, such as those used for weather forecast and reanalysis production, often have significant and systematic errors in their representation of the Arctic surface energy budget and its components. The newly available observation data of the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (2019/2020) enable a range of model analyses and validation in order to advance our understanding of potential model deficiencies. In the present study, we analyze deficiencies in the surface radiative energy budget over Arctic sea ice in the ERA5 global atmospheric reanalysis by comparing against the winter MOSAiC campaign data, as well as, a pan-Arctic level-2 MODIS ice surface temperature remote sensing product. We find that ERA5 can simulate the timing of radiatively clear periods, though it is not able to distinguish the two observed radiative Arctic winter states, radiatively clear and opaquely cloudy, in the distribution of the net surface radiative budget. The ERA5 surface temperature over Arctic sea ice has a conditional error with a positive bias in radiatively clear conditions and a negative bias in opaquely cloudy conditions. The mean surface temperature error is 4°C for radiatively clear situations at MOSAiC and up to 15°C in some parts of the Arctic. The spatial variability of the surface temperature, given by 4 observation sites at MOSAiC, is not captured by ERA5 due to its spatial resolution but represented in the level-2 satellite product. The sensitivity analysis of possible error sources, using satellite products of snow depth and sea ice thickness, shows that the positive surface temperature errors during radiatively clear events are, to a large extent, caused by insufficient sea ice thickness and snow depth representation in the reanalysis system. A positive bias characterizes regions with ice thickness greater than 1.5 m, while the negative bias for thinner ice is partly compensated by the effect of snow.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Review of In Situ Sensing for Directed Energy Deposition for Industrial Part Quality Assessment

As the use additive manufacturing (AM) processes continues to grow in critical industries, improved quality assurance methods are becoming increasingly sought after for qualification and certification of AM components. Traditional nondestructive evaluation of printed components is often unable to supply the required confidence in print quality to justify qualification and certification, but the layer-by-layer nature of AM provides unprecedented opportunities for in situ quality inspection. This document summarizes recent developments in process monitoring research specifically related to Directed Energy Deposition (DED). Particular attention is given to three aspects of the highlighted manuscripts: (1) the type of sensors used, (2) features extracted from each sensor modality, and (3) analysis of extracted features for AM quality assessment. Based on the review of the state-of-the-art, several observations have been made. First, none of the reviewed works have applied their trained models to real part geometries, with many of the works relying on single track experiments, thin-walled structures, and cubes. Similarly, there have not been any works demonstrating model generalizability, i.e., a model trained on data from one build allows for fruitful analysis of data from another build. Many works used machine learning techniques to distinguish different process regimes (i.e., normal, keyholing, lack-of-fusion), but very few papers have investigated stochastic variation in an already “optimized” process. Sensor fusion approaches are also limited in the DED sensing literature, but the few works that have employed such techniques have demonstrated the benefits. Finally, registration of in situ data to the build coordinate system is of paramount importance to producing industrially relevant in situ monitoring systems. Data registration allows direct correlations between process anomalies detected in the process monitoring data to localized departures in part quality, but such techniques are generally lacking in the current literature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiple Environmental Influences on the Lightning of Cold-Based Continental Cumulonimbus Clouds. Part I: Description and Validation of Model

In this two-part paper, influences from environmental factors on lightning in a convective storm are assessed with a model. In Part I, an electrical component is described and applied in the Aerosol–Cloud model (AC). AC treats many types of secondary (e.g., breakup in ice–ice collisions, raindrop-freezing fragmentation, rime splintering) and primary (heterogeneous, homogeneous freezing) ice initiation. AC represents lightning flashes with a statistical treatment of branching from a fractal law constrained by video imagery. The storm simulated is from the Severe Thunderstorm Electrification and Precipitation Study (STEPS; 19/20 June 2000). The simulation was validated microphysically [e.g., ice/droplet concentrations and mean sizes, liquid water content (LWC), reflectivity, surface precipitation] and dynamically (e.g., ascent) in our 2017 paper. Predicted ice concentrations (~10 L -1 ) agreed—to within a factor of about 2—with aircraft data at flight levels (-10° to -15°C). Here, electrical statistics of the same simulation are compared with observations. Flash rates (to within a factor of 2), triggering altitudes and polarity of flashes, and electric fields, all agree with the coincident STEPS observations. The “normal” tripole of charge structure observed during an electrical balloon sounding is reproduced by AC. It is related to reversal of polarity of noninductive charging in ice–ice collisions seen in laboratory experiments when temperature or LWC are varied. Positively charged graupel and negatively charged snow at most midlevels, charged away from the fastest updrafts, is predicted to cause the normal tripole. Total charge separated in the simulated storm is dominated by collisions involving secondary ice from fragmentation in graupel–snow collisions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Low-Level Liquid-Bearing Clouds Contribute to Seasonal Lower Atmosphere Stability and Surface Energy Forcing over a High-Mountain Watershed Environment

Measurements of atmospheric structure and surface energy budgets distributed along a high-altitude moun tain watershed environment near Crested Butte, Colorado, from two separate, but coordinated, field campaigns, Surface Atmosphere Integrated field Laboratory (SAIL) and Study of Precipitation, the Lower Atmosphere, and Surface for Hydrometeorology (SPLASH), are analyzed. This study identifies similarities and differences in how clouds influence the radiative budget over one snow-free summer season (2022) and two snow-covered seasons (2021/22; 2022/23) for this alpine location. A relationship between lower-tropospheric stability stratification and longwave radiative flux from the presence or absence of clouds is identified. When low clouds persisted, often with signatures of supercooled liquid in win ter, the lower troposphere experienced weaker stability, while radiatively clear skies that are less likely to be influenced by liquid droplets were associated with appreciably stronger lower-tropospheric stratification. Corresponding surface turbu lent heat fluxes partitioned differently based upon the cloud–stability stratification regime derived from early morning radiosounding profiles. Combined with the differences in the radiative budget largely resulting from dramatic seasonal dif ferences in surface albedo, the lower atmosphere stratification, surface energy budget, and near-surface thermodynamics are shown to be modified by the effective longwave radiative forcing of clouds. The diurnal evolution of thermodynamics and surface energy components varied depending on the early morning stratification state. Thus, the importance of quies cent versus synoptically active large-scale meteorology is hypothesized as a critical forcing for cloud properties and associ ated surface energy budget variations. The physical relationships between clouds, radiation, and stratification can provide a useful suite of metrics for process understanding and to evaluate numerical models in such an undersampled, highly com plex terrain environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Ecological and genomic variation in ectomycorrhizal fungal exploration types

Ectomycorrhizal fungi (EMF) produce mycelia with variable extension and complexity, which can be classified according to soil ‘exploration types’ (ETs). ETs have received attention as one of the few mycorrhizal trait frameworks, but without an empirical classification of ET functional diversity and environmental preferences, understanding and interpreting EMF biogeographic patterns has been difficult. We conducted a synthesis combining: comparative EMF genomics to describe functional divergence in decomposition and nutrient cycling genes across ETs; and EMF trait distribution modeling across continental Europe, pairing soil and root EMF surveys to establish biogeographic ET niche profiles. We demonstrate a signature of ETs encoded in EMF genomes, which is independent from phylogeny and linked to biomass production strategies. EMF ET relative abundances were separated by soil, root, and dominant tree leaf type habitats and exhibited unique correlations with forest biotic (e.g. plant productivity and plant pathogen densities) and abiotic (e.g. nitrogen deposition and soil pH) conditions. These findings support a theory that EMF niche partitioning can be partially explained by extraradical mycelial traits, with underlying variation in ET biogeography likely arising from distinct decomposition and nutrient cycling potentials. We also identify important limitations to this trait framework and provide a guided outlook for future research.

biogeography↗
DOE OSTI2025

Multiscale Characterization of Additive Manufacturing Components with Computed Tomography, 3D X-ray Microscopy, and Deep Learning

Additive manufacturing (AM) facilitates the creation of complex-geometry parts, driving advancements in lightweight aerospace components, high-efficiency engine cooling channels, and customized medical implants. However, ensuring the quality and reliability of AM parts remains challenging due to internal defects, surface irregularities, porosity, and residual trapped powder, which are often inaccessible to traditional inspection methods. Recent developments in X-ray computed tomography (XCT) and 3D X-ray microscopy (XRM), particularly systems equipped with resolution-at-a-distance (RaaD™) capabilities, enable high-resolution, non-destructive evaluation of AM components across multiple scales, from sub-micrometer to macroscopic levels. This paper explores modern XCT and XRM techniques for multiscale characterization of AM parts, focusing on their ability to detect and analyze defects such as porosity, cracks, inclusions, and surface roughness, while offering insights into defect formation mechanisms, material properties, and process-induced variations. The integration of deep learning (DL) frameworks, including Simurgh, DeepRecon, and DeepScout, enhances XCT/XRM workflows by reducing scan times, improving resolution recovery, and enabling accurate defect detection even with limited projection data. These DL-based methods overcome limitations of traditional reconstruction techniques, enabling faster, more reliable characterization of dense materials like Inconel 718 and novel alloys such as AlCe. Applications include process parameter optimization, high-throughput quality control, and multistage AM process evaluation, with DL-enhanced workflows accelerating analysis times from weeks to days. Correlative imaging approaches further validate XCT and XRM data against scanning electron microscopy (SEM) images of physically sectioned samples, confirming the accuracy of DL-based reconstructions and enabling comprehensive defect analysis. While challenges remain in generalizing DL models to diverse materials and imaging conditions, improvements in resolution, noise reduction, and defect detection highlight the transformative potential of these methods. This multiscale and correlative approach enables precise identification and correlation of microstructural features with the overall performance of AM components. By integrating advanced XCT, XRM, and DL techniques, this paper demonstrates a significant leap forward in AM characterization, offering valuable insights into the relationships between processing parameters, microstructure, and part performance, and driving innovations that enhance the quality and reliability of AM products for demanding industrial applications.

Additive manufacturing↗
DOE OSTI2022

Correction to: Investigating the rheology of fluidized and non-fluidized gas-particle beds: implications for the dynamics of geophysical flows and substrate entrainment

We report natural geophysical mass flows are among the most complex granular systems and their dynamics are often modified by the presence of an interstitial fluid. Prediction of their runout requires the development of models estimating the solid stresses in these hazardous currents wherein excess pore-fluid pressure can develop. We use discrete element modelling (DEM-CFD) with a Coarse-Graining post-processing technique (CG) to investigate the rheology of unsteady gas-particle fluidized to non-fluidized granular beds placed on horizontal and inclined planes. Similar to fluidized beds immersed in viscous fluids, the effective friction coefficient of air-fluidized beds can be defined as a function of the classic μ(I)-rheology and the non-dimensional fluid or solid pressure to explain the failure and dynamics of granular flows with excess pore pressure on inclines. However, dilation imposed by fluid drag and particle collisions in gas-particle fluidized beds can drastically change its effective frictional properties. In contrast with the common assumption in water-particle flows that granular temperature is negligible, in our gas-particle simulations, the contribution of the velocity fluctuations to the stress tensor is significant. Hence, the shear stress is found to be non-zero even when the flow is fully fluidized in the inertial regime. These results suggest the need to better understand velocity fluctuations to predict the effective viscosity of sheared fluidized mixtures and are relevant for many applications. Notably, a unified approach is useful for many geophysical flows that encompass a range of fluidization conditions in a single flow such as pyroclastic density currents and snow avalanches.

58 GEOSCIENCES↗
DOE OSTI2021

Hydrological projections over the Upper Indus Basin at 1.5 °C and 2.0 °C temperature increase

We analyse an ensemble of statistically downscaled Global Climate Models (GCMs) to investigate future water availability in the Upper Indus Basin (UIB) of Pakistan for the time horizons when the global and/or regional warming levels cross Paris Agreement (PA) targets. The GCMs data is obtained from the 5th Phase of Coupled Model Inter-Comparison Project under two Representative Concentration Pathways (RCP4.5 and RCP8.5). Based on the five best performing GCMs, we note that global 1.5 °C and 2.0 °C warming thresholds are projected in 2026 and 2047 under RCP4.5 and 2022 and 3036 under RCP8.5 respectively while these thresholds are reached much earlier over Pakistan i.e. 2016 and 2030 under RCP4.5 and 2012 and 2025 under RCP8.5 respectively. Interestingly, the GCMs with the earliest emergence at the global scale are not necessarily the ones with the earliest emergence over Pakistan, highlighting spatial non-linearity in GCMs response. The emergence of 2.0 °C warming at global scale across 5 GCMs ranges from 2031 (CCSM4) to 2049 (NorESM) under RCP8.5. Precipitation generally exhibits a progressive increasing trend with stronger changes at higher warming or radiative forcing levels. Hydrological simulations representing the historical, 1.5 °C and 2.0 °C global and region warming time horizons indicate a robust but seasonally varying increase in the inflows. The highest inflows in the baseline and future are witnessed in July. However, the highest future increase in inflows is projected in October under RCP4.5 (37.99% and 65.11% at 1.5 °C and 2.0 °C) and in April under RCP8.5 (37% and 62.05% at 1.5 °C and 2.0 °C). These hydrological changes are driven by increases in the snow and glacial melt contribution, which are more pronounced at 2.0 °C warming level. These findings should help for effective water management in Pakistan over the coming decades.

54 ENVIRONMENTAL SCIENCES↗