Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiOs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Oxidation of ultrahigh temperature ceramics: kinetics, mechanisms, and applications

Materials capable of oxidizing in a protective manner at ultrahigh (>1700 °C) temperatures are needed to push beyond this barrier defined by SiC. Although possessing attractive mechanical properties and oxidation resistance, SiC-based materials are ultimately temperature limited by the melting point of SiO 2 . The vast array of ultra-high and high temperature ceramic literature indicates the majority of these materials, like borides, carbides, MAX-phases, and high-entropy ceramics, fall woefully short regarding oxidation resistance. However, for specific applications, like low-orbit aeropropulsion, high ballistics coefficient atmospheric re-entry, and hypersonic cruise, there are a few promising materials. Here, oxidation criteria are gathered to build application specific heuristics and are then applied to a multitude of ultra-high temperature ceramics to gauge material efficacy. Discussion of oxidation kinetics, mechanisms and reaction products is offered for each material, identifying strengths, weaknesses, and the remaining gaps in our knowledge.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In-situ TEM study of Kr ion irradiation tolerance of SiFeOC nanocomposite

Here, in this work, ion irradiation of polymer derived SiFeOC nanocomposite was carried out using 1.2 MeV Kr ions at room temperature and 600°C. The starting composite was composed of Fe 3 Si, SiC, SiOC, SiO 2 , and graphitic C. In-situ TEM investigations show uniform distribution of nano-crystalline Fe 3 Si and SiC phases in the amorphous SiOC matrix. During ion irradiation, the SiOC bulk microstructure and interfaces between Fe 3 Si or SiC crystallites and the SiOC matrix remain defect-free and demonstrate outstanding ion irradiation resistance. At room temperature, the crystalline domains are stable up to 2 dpa. At 600°C, Fe 3 Si crystallites are more stable than SiC; SiC crystallites are stable up to 4 dpa while the Fe 3 Si crystallites are stable up to 10 dpa. These crystallites also coalescence and amorphize simultaneously during ion irradiation. The exceptional tolerance to defect formation and irradiation of the SiFeOC nanocomposite provides important guidance to developing irradiation resistant fuels for advanced gas cooled reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of temperature, oxygen partial pressure, and microstructure on the high-temperature oxidation behavior of the SiC Layer of TRISO particles

Tristructural isotropic (TRISO)-coated fuel particles are designed for use in high-temperature gas-cooled nuclear reactors, featuring a structural SiC layer that may be exposed to oxygen-rich environments over 1000 °C. Surrogate TRISO particles were tested in 0.2–20 kPa O 2 atmospheres to observe the differences in oxidation behavior. Oxide growth mechanisms remained consistent from 1200–1600 °C for each P O$_2$ , with activation energies of 228 ± 7 kJ/mol for 20 kPa O 2 and 188 ± 8 kJ/mol for 0.2 kPa O 2 . At 1600 °C, kinetic analysis revealed a change in oxide growth mechanisms between 0.2 and 6 kPa O2. In 0.2 kPa O 2 , oxidation produced raised oxide nodules on pockets with nanocrystalline SiC. Oxidation mechanisms were determined using Atom probe tomography. Active SiC oxidation occurred in C-rich grain boundaries with low P O$_2$ , leading to SiO 2 buildup in porous nodules. Here, this phenomenon was not observed at any temperature in 20 kPa O 2 environments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Solid phase characterization and transformation of illite mineral with gas-phase ammonia treatment

In situ remediation applications of ammonia (NH 3 ) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH 3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH 3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N 2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. The results of this study indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH 3 . While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO 4 ] n- ) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH 3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-resolution laser-induced fluorescence spectroscopy of 28 Si 16 O + and 29 Si 16 O + in a cryogenic buffer-gas cell

Here, the electronic, laser-induced fluorescence spectrum of the B 2 Σ + ← X 2 Σ + transition in 28 Si 16 O + and 29 Si 16 O + has been recorded in a cryogenic buffer gas cell at K. Molecular constants are extracted for both 28 Si 16 O + and 29 Si 16 O + , including the Fermi contact hyperfine constant for both the B and X states of 29 Si 16 O + , and used in a discussion of the suitability of SiO in future quantum information experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

The C 2 H 4 O isomers in the oxidation of ethylene

A combined rotational spectroscopy, thermochemistry, and kinetic modeling study explores the mechanism of acetaldehyde (ethanal), vinyl alcohol (ethenol), and ethylene oxide (oxirane) formation in the oxidation of ethylene (ethene). Multiplexed quantitative detection of oxidation intermediates and products exiting a SiO 2 / SiC microreactor at 1700 K is demonstrated with the BrightSpec W-band chirped-pulse Fourier transform millimeter-wave spectrometer. The broadband rotational spectrum contains transitions of formaldehyde (CH 2 O), methoxy (CH 3 O), methanol (CH 3 OH), ketene (CH 2 CO), acetaldehyde (CH 3 CHO), syn-vinyl alcohol (syn- CH 2 CHOH), anti-vinyl alcohol (anti-CH 2 CHOH), oxirane (c-CH 2 OCH 2 ), propyne (CH 3 CCH), and syn-propanal (syn-CH 3 CH 2 CHO). We focus on the three C 2 H 4 O species and deduce their concentration ratio [CH 3 CHO]:[CH 2 CHOH]:[c-CH 2 OCH 2 ] = 1:0.7(2):0.06(2) by comparing the observed line intensities to those simulated with the PGOPHER software. Detailed thermochemistry of the C 2 H 4 O isomers and conformers is provided by Active Thermochemical Tables. The observed excess concentrations of vinyl alcohol and oxirane relative to the more stable acetaldehyde compared to the equilibrium ratio at 1700 K (1:0.087:0.000024), point to direct chemical pathways to these higher energy isomers. The mechanism for the formation of the three C 2 H 4 O isomers is analyzed using a 0-D homogenous reactor kinetics simulation for ethylene oxidation. The ratios of the C 2 H 4 O isomers concentrations predicted by the kinetic model are compared to the experimental values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A comparative study of the effectiveness of empirical potentials for molecular dynamics simulations of borosilicate glasses

Despite their practical importance, atomistic modeling of B 2 O 3 containing glasses have been challenging due to the lack of reliable empirical potentials. Fortunately, a few recent developments have shown promises to simulate these glasses where the boron coordination has complex and non-linear dependence on glass composition. This work aims to provide an evaluation of the effectiveness of three recently developed potentials by a systematic study of a series (~20) of sodium borosilicate glasses with constant K (ratio of [SiO 2 ]/[B 2 O 3 ]) =2 and varying R (ratio of [Na 2 O]/[B 2 O 3 ] ranging from 0.1 to 4) values and several sodium boroaluminosilicate glasses. A comparative assessment was established on the basis of the short- and medium-range structure features, such as boron N 4 values, total correlation functions, bond angle distribution, oxygen speciation, and mechanical properties using experimental or well-established models as criteria. Furthermore, this work provides insights on the choices of empirical potentials for MD simulations of borosilicate glasses and gives directions of future potential development and refining.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Anomalously strong viscosity behavior in mixed oxy-sulfide Na 4 P 2 S 7-x O x invert glasses

In this paper, the first observations have been made of anomalously strong viscosity behavior and correspondingly strong bulk glass formation and resistance to crystallization in a melt quenched (MQ) prepared series of invert, modifier content greater than the glass former content, mixed oxy-sulfide Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 5, (NaPSO) glasses. We find that these glasses even with 67 mole % modifier, Na 2 S, and only 33 mole% glass former P 2 S 5-x O x , exhibit a calorimetric fragility index, m cal , as small as 29 compared to typical values of ~ 60 to 80 for alkali silicate glasses with > 50 mole% SiO 2 and the theoretical minimum m cal of ~ 15. The m cal values were converted to kinetic viscosity fragility, m vis , values and used with the measured glass transition temperatures, T g s, to produce viscosity curves for the glasses using the Mauro-Yue-Ellison-Gupta-Allan (MYEGA) model. The viscosity of the glass with a minimum m cal value of x = 2.5 was then shown to exhibit a viscosity that was as strong as, and for some compositions stronger than, the viscosity of alkali aluminosilicate glasses which have three dimensional network structures compared to the one dimensional chain structures observed in these MOS invert glasses. Consistent with these small values of fragility indices and therefore predicted higher viscosity above the glass transition temperature, T g , in the supercooled liquid regime, these glasses are also particularly resistant to crystallization. For example, the x = 2.5 glass composition exhibits a crystallization temperature, T C , more than 150K above its T g . We find that the calorimetric fragility of these glasses varies systematically with the extent of network forming bridging oxygens (BOs) in the glasses. The structural change caused by incrementally replacing sulfur with oxygen has been found to have consistent, large effects on the thermal properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoscopic structure of borosilicate glass with additives for nuclear waste vitrification

In this report we investigated the nanoscopic structure of borosilicate glasses as a host for high-level radioactive liquid waste (HLLW) in the presence of the additives Na 2 O and CaO/ZnO with and without Li 2 O. These additives have been used to lower the glass melting point, suppress the macroscopic phase separation, and increase the chemical durability of glasses. Small-angle neutron scattering was used to elucidate the effect of the additives on the nanoscopic structure along with macro- and atomic-scale observations obtained using neutron imaging and X-ray diffraction, respectively. The borosilicate glass made without Na 2 O formed a microphase-separated structure of SiO 2 - and B 2 O 3 -rich domains approximately 100 nm in size, and the material was homogeneous at length scales up to millimeters. With the addition of increasing amounts of Na 2 O, the domain spacing decreased. Introducing CaO/ZnO additives induced inhomogeneities in the glass, such as void structures several nanometers in size, although the inhomogeneity was suppressed by the coaddition of Li 2 O. These results provide insights into the performance of host glasses for HLLW vitrification. Incorporating HLLW into glasses is likely to cause changes in the nanoscopic structure of host glasses similar to those revealed here.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

In-situ investigation of the vibrational properties of H 2 O CO 2 -bearing and dry K-rich basaltic glasses at high pressure by mid infrared spectroscopy

Here, the vibrational properties of CO 2 –H 2 O-bearing and dry synthetic K-rich basaltic glasses were investigated at room temperature and pressures between 0.0001–5.5 GPa using the diamond anvil cell combined with in situ reflectance and transmittance Fourier Transform infrared micro-spectroscopy. The absorption coefficient a(v) calculated from the Kramers-Kronig relation shows that glasses are dominated by the Q 2 aluminosilicate unit followed by Q 1 , Q 3 . The variation in Q n concentration upon compression suggests that glasses undergo polymerization from ambient pressure to 2 GPa followed by less marked structural changes up to 4 GPa, above which the structure is further polymerized. Once decompressed, glasses retained a polymerized structure. Our results show that 1.03 wt% CO 2 -1.42 wt% H 2 O in a glass with 3.10 wt% K 2 O and 46.77 wt% SiO 2 prevent the formation of fully polymerized connections when cold-compressed. Our results can be used to explain the effect of volatiles and alkali on the rheology of natural basaltic magmas.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Study of beyond nearest-neighbor environment and intermediate-range order in a sodium aluminosilicate geopolymer using Reverse Monte Carlo modeling

A large scale three-dimensional structural model of a geopolymer with an approximate composition of NaAlSi 2 O 6 .5.5H 2 O obtained by Reverse Monte Carlo (RMC) modeling based on experimental high-energy x-ray diffraction is presented for the first time in order to obtain information regarding beyond nearest-neighbor environment and intermediate-range order (IRO). RMC model exhibits a three-dimensional network consisting of randomly cross-linked AlO 4 and SiO 4 tetrahedral units with uniformly distributed Na atoms and H 2 O molecules. The bond angle distributions, i.e. T-O-T, O-T-O and Na-O-Na angles, are somewhat distorted with lower values compared to analogous crystal systems. The origin of the first peak in the structure factor indicating IRO is investigated using the partial structure factors; Na-Na, Si-Na, Al-Si, O-H, and H-H atom pairs are found to be the main contributors. Ring size distribution analysis demonstrates that the structure mainly involves 6-, 7- and 8-membered rings. Finally, the coherence length of these IRO characteristics is ~10.3 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhanced backscatter and unsaturated blue wavelength shifts in F-doped fused silica optical fibers exposed to extreme neutron radiation damage

Amorphous fused silica (a-SiO 2 ) optical fibers, with and without inscribed Bragg gratings, were interrogated using infrared (~1550 nm) optical backscatter reflectometry during ~25 days of intense neutron irradiation to a fast (energy > 0.1 MeV) neutron fluence of ~10 21 n/cm 2 , or ~1.5 atomic displacements per atom. The reflected light amplitudes in Ge-doped core telecommunications fiber dropped below detection limits (>15 dB attenuation) within 3 days of irradiation (~10 20 fast n/cm 2 ). Here, amplitudes from a pure silica core, F-doped silica cladding fiber reached equilibrium levels ~1.5–2 dB higher than pre-irradiation values, whereas Bragg gratings inscribed in the same fiber using a femtosecond laser (point-by-point method) suffered > 45 dB attenuation. Blue wavelength shifts were initially consistent with previous radiation-induced compaction models but increased linearly with increasing neutron fluence (no evidence of saturation) beyond 10 20 n/cm 2 and exceeded 0.6%, which corresponds to >1,000 °C drift if used to measure temperature changes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microstructural analysis of tristructural isotropic particles in high-temperature steam mixed gas atmospheres

High-temperature gas-cooled reactors (HTGRs) use tristructural isotropic (TRISO) particles embedded in a graphitic matrix material to form the integral fuel element. Potential off-normal reactor conditions for HTGRs include steam ingress with temperatures above 1,000 °C. Fuel element exposure to steam can cause the graphitic matrix material to evolve, forming an atmosphere composed of oxidants and oxidation products and potentially exposing the TRISO particles to these conditions. Investigating the oxidation response of TRISO particles exposed to a mixed gas atmosphere will provide insight into the stability under off-normal conditions. In this study, surrogate TRISO particles were exposed to high temperatures (T = 1,200 °C) in flowing steam (3% < pH 2 O < 21%) and CO (pCO < 1%) to determine the oxidation behavior of the SiC layer when exposed to various mixed gas atmospheres. Scanning electron microscopy, x-ray diffraction, and focused ion beam milling was used to determine the impact of CO and steam on the oxidation behavior of the SiC layer. Therefore, the data presented demonstrates how the SiC layer showed strong oxidation resistance due to limited SiO 2 growth and maintained its structural integrity under these off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi

We report dissimilar materials interactions are a major concern when liquid metals are used as a working fluid. To simulate a dual-coolant PbLi blanket, chemical vapor deposited (CVD) SiC, pre-oxidized FeCrAlMo (APMT) and pre-oxidized aluminized coating on Fe-8Cr-2 W (F82H) specimens were exposed to flowing commercial Pb-17at.%Li with a peak temperature of 650 °C in a pre-oxidized APMT thermal convection loop (TCL) for 1000 h. Similar to prior results in static PbLi, the coated F82H showed small mass changes and limited degradation of room-temperature tensile properties. After exposure, the α-Al 2 O 3 on the surface coated F82H reacted with the PbLi to form LiAlO 2 . However, no significant Al coating loss or interdiffusion was observed. Mass transfer was observed between the APMT, TCL and the SiC specimens. Fe, Cr and Ni were dissolved into the molten flowing PbLi and transported through the TCL to react with the SiC specimens. Compared to a prior experiment with a majority of bare FeCrAl specimens that were exposed in a TCL with a peak temperature of 700 °C for 1000 h, the SiC reaction was reduced to only a few microns of carbides and silicides. Oxygen dissolved in the molten PbLi sustained the formation of an Al 2 O 3 scale on the surface of the coating and induced the formation of a thin surface SiO 2 layer on the surface of the SiC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Application of the immobilized low-activity waste glass corrosion model to the static dissolution of 24 statistically-designed alkali-borosilicate waste glasses

Glass corrosion models that capture the complex mechanisms of the glass-water reaction enable the prediction of nuclear waste glass durability in disposal scenarios. Parameterization of such models is challenging because of the need to capture changes in corrosion behavior with time, reaction conditions, and glass composition. In this report we describe and employ the immobilized low activity waste (ILAW) glass corrosion model (IGCM) in geochemical simulations of static dissolution tests, at two temperatures (40 °C and 90 °C), for a matrix of 24 enhanced low activity waste (eLAW) glasses statistically designed to cover a processable composition space defined by 8 major glass components (Al 2 O 3 , B 2 O 3 , CaO, Na 2 O, SiO 2 , SnO 2 , ZrO 2 , and Others as defined in the text). The IGCM includes a first-order chemical affinity term and an ion-exchange term that represents the net exchange of Na+ ions in the pristine glass with protons in aqueous solution. Constant, time-dependent, and time- and pH-dependent functional forms of the ion-exchange term are evaluated to reproduce the change in corrosion behavior with time in saturated, static dissolution tests. The agreement with measured aqueous concentrations of the main glass components (B, Na, and Si) improved significantly upon addition of a time-dependent term, which therefore constitutes a simple representation of the glass-water reaction progress. Due to the limited changes in pH in the static dissolution tests, past a short initial period of rapid increase, addition of a pH dependent term did not appreciably improve the fits, indicating that comprehensive model parameterization requires more than one type of glass corrosion test to capture a wide range of solution chemistries. IGCM parameters were found to be dependent on glass composition, and the parameter sets generated in this work will enable the development of composition–parameter correlation models that offer the promise of predicting IGCM parameters, and thus glass corrosion behavior, solely based on glass composition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Effect of glass forming additives on low-activity waste feed conversion to glass

A significant effort was invested in the past to develop and refine mathematical models that relate the composition of nuclear waste glasses with their properties, such as viscosity, electrical conductivity, or chemical durability. However, less attention has been paid to the formulation of the melter feed itself, such as the chemical form and the particle size of the glass forming and modifying additives (GFMA), which have a significant effect on the feed-to-glass conversion process during melting. To address this issue, we systematically changed the mineral composition of a simulated low-activity waste melter feed and inspected its melting behavior. When substituting minerals with corresponding oxides and hydroxides, we found that different alumina sources (kyanite, gibbsite, boehmite, or corundum) had the strongest effect on the feed melting process, whereas the sources of Ca, Mg, and Zr had little effect. Further, the x-ray diffraction analysis showed that the alumina sources differ in their dissolution kinetics: early dissolving alumina sources, such as gibbsite (Al(OH) 3 ) and boehmite (AlO(OH)), increase the transient glass-forming melt viscosity at early stages, when gases still evolve, causing extended foaming, whereas alumina sources that dissolve at high temperatures, such as kyanite (Al 2 SiO 5 ) and corundum (Al 2 O 3 ), keep the transient glass-forming melt viscosity low and lead to a faster foam collapse. Using viscosity-composition relationship to estimate the viscosity of transient glass-forming melts in the primary foaming range, we found that the primary foam began to collapse at 360 to 800 Pa s, and fully collapsed between 65 and 260 Pa s. This result agrees with our previous studies, according to which the glass-forming melt viscosity at the cold cap foam bottom ranged from 24 to 85 Pa s.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Local electrical degradations of solid-state electrolyte by nm-scale operando imaging of ionic and electronic transports

We report on degradation mechanisms of solid-state electrolyte (SSE) based on insights from nm-scale ionic conduction and electronic leakage for solid-state batteries. The significantly different local degradations revealed by nm-scale ionic and electronic transport imaging demonstrate the need for this nm-scale investigation. State-of-the-art lithium-ion conductive glass ceramic (Li 2 O–Al 2 O 3 –SiO 2 –P 2 O5–TiO2-GeO2) SSE shows at least two types of degradations spatially separated within the SSE, namely: (1) ionic conduction blocking and slight electronic leaking and (2) highly electronic shunting. Degradation was significantly suppressed by application of a Li-containing polyacrylonitrile thin coating on both sides of the ceramic SSE. With this coating, the ionic conduction was not reduced by the extensive cycling; instead, it improved slightly, although accompanied by a slight increase in electronic leaking. Our nm-scale transport imaging was achieved using an atomic force microscopy (AFM)-based half-cell setup and a logarithmic-scale amplifier with current sensitivity down to the fA (10-15 A) range. This half-cell setup consisting of an AFM-probe/SSE/Li structure can distinguish the ionic from the electronic current by flipping the bias-voltage polarity. This nm-scale operando imaging opens up novel characterization of ionic and electronic transport in the field of solid-state batteries.

42 ENGINEERING↗
DOE OSTI2025

High performance porous Si anode enabled by an organic-solvent assisted etching process

Silicon (Si) is a promising anode for the next generation of lithium-ion batteries, but its large volume changes (~300 %) during cycling hindered its practical applications. One method to improve its stability is to etch micron sized Si/SiO 2 particles to form porous Si (p-Si) and accommodate volume changes internally. However, the conventional HF etching method generates excess gas/heat and is difficult to scale up. Herein, we developed an organic-solvent-assisted HF etching process (O-HF) using a mixture of benzene and saturated HF aqueous solution. The organic solvent can be preferentially absorbed on the surface of Si/SiO 2 powder so etching rate of SiO 2 can be controlled to avoid rapid gas/heat generation. This method can also prevent over-etching of Si by minimizing direct contact/react between water and newly exposed Si. Si||NMC622 cells using carbon coated p-Si particles prepared by optimized O-HF etching process demonstrate a capacity retention of 82.0 % after 500 cycles, which is much better than those prepared by conventional HF etching (73.7 %). The thickness of Si anode increases only ~10 % during the initial lithiation, which is comparable with those of graphite anode. In conclusion, the O-HF etching strategy developed in this work can also be applied to the etching of a broad range of materials.

HF etching↗