Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARK EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

In situ optical emission study on the role of C{sub 2} in the synthesis of single-walled carbon nanotubes

In situ optical emission spectroscopy was used to study the temporal and spatial behavior of laser induced plasmas in the laser-furnace synthesis of single-walled carbon nanotubes (SWCNTs). A graphite composite target located within a sealed quartz tube with a chemical stoichiometric composition of 95:4:1 at. wt % of carbon, yttrium, and nickel, respectively, was ablated by a Q-switched Nd:YAG laser delivering colinear, focused laser pulses of 1064 and 532 nm temporarily separated by 20 ns. The ablation process was done at a furnace temperature of 1273 K in a flow of argon gas at either 150 or 200 SCCM (SCCM denotes cubic centimeter per minute at STP). The pressure was varied (100, 400, and 600 Torr) for each gas flow setting. The temporal and spatial behavior of the emission intensity associated with C{sub 2} Swan bands (d {sup 3{Pi}}{sub g}-a {sup 3{Pi}}{sub u}) was investigated and found to be influenced by the pressure and flow rate of the argon gas. At conditions optimal to SWCNT production, a sharp drop in C{sub 2} intensity followed by a rise in C{sub 2} intensity was observed. The temporal and spatial behavior of the electron density was determined by the Stark broadening profile of the CII emission peak at 283.7 nm and was found to decrease with the adiabatic expansion of the plume. We propose that the sharp drop in C{sub 2} intensity and the rise in electron density and electron temperature observed in this study are due to the accompanying rapid nucleation and growth of SWCNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spectroscopic study of a long high-electron-density argon plasma column generated at atmospheric pressure

A stable plasma column is generated in a quartz tube using a pair of hollow electrodes driven by a sinusoidal power supply of 45 kHz at atmospheric pressure in argon. Two distinct operating modes (low-current and high-current modes) are identified through observing its discharge phenomena, measuring its electrical characteristics, and determining the gas temperatures by spectroscopic diagnosis of Q branch of UV OH spectrum. The electron density in the high-current mode is diagnosed by Stark broadening and is found to be two orders higher than that in low-current mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gas temperature and electron density profiles in an argon dc microdischarge measured by optical emission spectroscopy

Optical emisssion spectroscopy was employed to study a high pressure (100 s of Torr), slot-type (600 {mu}m interelectrode gap), argon dc microdischarge, with added traces of nitrogen. Spatially resolved gas temperature profiles were obtained by analyzing rovibrational bands of the N{sub 2} first positive system. The gas temperature peaked near the cathode and increased with current. The contribution of Stark broadening to the hydrogen H{sub {beta}} emission lineshape was used to extract the electron density. The axial distribution of electron density as well as visual observation revealed that the microdischarge positive column was highly constricted. The electron density near the sheath edge increased with both pressure and current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stark Widths and Shifts Dependence on the Rest Core Charge of the Emitters within ns-np Transition Arrays

Stark width and shift simultaneous dependence on the upper level ionization potential and rest core charge of the emitter has been evaluated and discussed. It has been verified that the found relations, connecting Stark broadening parameters with upper level ionization potential and rest core charge of the emitters for particular electron temperature and density, can be used for prediction of Stark line width and shift data in case of ions for which observed data, or more detailed calculations, are not yet available. Stark widths and shifts published data are used to demonstrate the existence of other kinds of regularities within similar spectra of different elements and their ionization stages. The emphasis is on the Stark parameter dependence on the upper level ionization potential and on the rest core charge for the lines from similar spectra of multiply charged ions. The found relations connecting Stark widths and shift parameters with upper level ionization potential, rest core charge and electron temperature were used for a prediction of new Stark broadening data, thus avoiding much more complicated procedures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optical spectroscopy investigation on distribution of Eu{sup 3+} in nanostructured glass ceramics

The time-resolved luminescence spectra of the Eu{sup 3+} doped SiO{sub 2}-Al{sub 2}O{sub 3}-NaF-YF{sub 3}-EuF{sub 3} precursor glass reveal that Eu{sup 3+} ions locate in both the oxygen-coordination environment and the fluorine-coordination one. After crystallization induced by heat treatment, the orthorhombic YF{sub 3} nanocrystals with mean size of 22 nm embedded homogeneously in the glassy matrix. The Stark splitting emission, the low electric dipole {sup 5}D{sub 0}{yields}{sup 7}F{sub 2} transition, the disappearance of the O{sup 2-}-Eu{sup 3+} charge transfer band and the reduction in {Omega}{sub 2} value indicate the partition of Eu{sup 3+} into the YF{sub 3} lattice. Moreover, the nearly single-exponential luminescence decay curves of the Eu{sup 3+}:{sup 5}D{sub 0} and {sup 5}D{sub 1} levels for the 0.1%Eu{sup 3+} doped glass ceramic evidence that Eu{sup 3+} ions mainly occupy the Y{sup 3+} sites.

36 MATERIALS SCIENCE↗

Spectroscopic analysis of temperature and density of Sn plasma produced by a CO{sub 2} laser

The temporal and spatial evolution of electron temperature and electron density from Sn plasma produced by a CO{sub 2} laser has been investigated in vacuum using spectroscopic methods. The plasma parameters were inferred by the Boltzmann plot method from experimentally observed line profiles of singly ionized Sn and Stark broadened profiles. At a laser intensity of 10{sup 10} W/cm{sup 2}, electron temperature and density were measured to be within 1.13 eV to 0.53 eV and 5.3x10{sup 16} cm{sup -3} to 1.4x10{sup 16} cm{sup -3}, respectively, for delay times between 200 ns and 1100 ns, and at distances up to 5 mm along the target normal. The results show the electron temperature and density from Sn plasma produced by a CO{sub 2} laser with wavelength of 10.6 {mu}m to be lower than previously reported results using a 1064 nm laser in a similar parameter regime. The lower temperature in the region far away from the target surface confirms the smaller interaction region for CO{sub 2} laser as compared with that of neodymium-doped yttrium aluminum garnet laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stark Profiles In Plasmas Interacting With A Strong Oscillatory Quasi-Monochromatic Electric Field

This paper presents an advanced analysis of the spectroscopic signatures of the interaction of a strong oscillating Quasi-monochromatic Electric Field (QEF), generated by a high-power short-pulse laser, with a preformed laser-produced plasma. The computation of a synthetic spectrum emitted by such plasmas requires the calculation of the Stark line shape in the presence of a QEF and the evaluation of the QEF intensity profile throughout the line of sight in the plasma. As for the Stark profiles in hot dense plasmas submitted to a strong QEF, they are calculated using the so-called Floquet-Liouville formalism. In this formalism, the Liouville space, usually used for the calculation of Stark profiles in dense plasmas, and the Floquet theory, developed to solve time-periodic problems, have been joined together to solve the time-dependent Liouville equation. A second kind of simulations involving Particle-In-Cell PIC kinetic simulations is required for the calculation of the QEF inhomogeneous intensity and the exotic features exhibited in the spectroscopic diagnostic. The global synthetic profile is obtained integrating all individual contributions for every time and location in the plasma. Finally, a spectroscopic analysis of the experimental Al He {beta} line is performed using the tools presented in this work. The spectroscopic signatures of the QEF show up as prominent satellites, non symmetrical with respect to the unperturbed line and distinguishable from the di-electronic satellites.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth of cubic GaN quantum dots

Zinc-blende GaN quantum dots were grown on 3C-AlN(001) by two different methods in a molecular beam epitaxy system. The quantum dots in method A were fabricated by the Stranski-Krastanov growth process. The quantum dots in method B were fabricated by droplet epitaxy, a vapor-liquid-solid process. The density of the quantum dots was controllable in a range of 10{sup 8} cm{sup -2} to 10{sup 12} cm{sup -2}. Reflection high energy electron diffraction analysis confirmed the zinc-blende crystal structure of the QDs. Photoluminescence spectroscopy revealed the optical activity of the QDs, the emission energy was in agreement with the exciton ground state transition energy of theoretical calculations.

36 MATERIALS SCIENCE↗

VAMDC FP7 project and STARK-B database: C II Stark broadening parameters for white dwarf atmospheres research

Stark broadening parameters of C II lines were determined within 3s-np spectral series within the semiclassical perturbation method. The atomic energy levels needed for calculations were taken from TOPBASE as well as the oscillator strengths, calculated additionally using the Coulomb approximation (the method of Bates and Damgaard). The both results were compared and the disagreement is found only in one case where the configuration mixing allows a forbidden transition to a close perturbing energy level. Calculations were performed for plasma conditions relevant for atmospheres of DQ white dwarfs and for a new type of white dwarfs, with surface composed mostly of carbon, discovered in 2007 by Dufour et al.. The aim of this work is to provide accurate C II Stark broadening data, which are crucial for this type of white dwarf atmosphere modellisation. Obtained results will be included in STARK-B database (http://stark-b.obspm.fr/), entering in the FP7 project of European Virtual Atomic and Molecular Data Center VAMDC aiming at building an interoperable e-Infrastructure for the exchange of atomic and molecular data (http://www.vamdc.org/).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal-field analysis and Zeeman splittings of energy levels of Nd{sup 3+} (4f{sup 3}) in GaN

The crystal-field splitting and Zeeman splitting of energy levels of Nd{sup 3+} (4f{sup 3}) doped into semi-conducting GaN (3.2 eV) grown in the hexagonal (huntite) phase by plasma-assisted molecular beam epitaxy have been modeled using a parameterized Hamiltonian defined to operate within the complete 4f{sup 3} electronic configuration of Nd{sup 3+} substituted for Ga{sup 3+} in the lattice. Zeeman splittings were obtained by applying magnetic fields up to 6.6 T with the fields parallel and perpendicular to the crystallographic c-axis. The experimental energy (Stark) levels were obtained from a recent spectroscopic study on the same samples, where the combined excitation emission spectroscopy (CEES) identified the majority of Nd{sup 3+} ions as replacing Ga{sup 3+} in sites of C{sub 3v} symmetry. The manifolds of Nd{sup 3+} (4f{sup 3}){sup 2S+1}L{sub J} modeled for the crystal-field splitting include the ground state, {sup 4}I{sub 9/2}, and excited states {sup 4}I{sub 11/2}, {sup 4}I{sub 13/2}, {sup 4}F{sub 3/2}, {sup 4}F{sub 5/2}, {sup 2}H{sub 9/2}, {sup 4}F{sub 7/2}, {sup 4}S{sub 3/2}, {sup 4}G{sub 5/2}, and {sup 4}G{sub 7/2}. The energies of 41 experimental Stark levels from these manifolds were modeled through the use of a Monte Carlo method in which independent crystal-field parameters (CFP) were given random starting values and optimized using standard least-squares fitting between calculated and experimental Stark levels. Irreducible representations (irreps) and crystal field quantum numbers ({mu}) were assigned to the energy level states of the {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} multiplet manifolds based on an analysis of the Zeeman data. This allows determination of which of the competing local minima should be considered to be the physically significant minimum. Using standard least-squares fitting between calculated and experimental Stark levels for Nd{sup 3+} in C{sub 3v} symmetry, we obtain a final standard deviation of 7.01 cm{sup -1} (rms = 5.48 cm{sup -1}).

36 MATERIALS SCIENCE↗

Beyond Zeeman spectroscopy: Magnetic-field diagnostics with Stark-dominated line shapes

A recently suggested spectroscopic approach for magnetic-field determination in plasma is employed to measure magnetic fields in an expanding laser-produced plasma plume in an externally applied magnetic field. The approach enables the field determination in a diagnostically difficult regime for which the Zeeman-split patterns are not resolvable, as is often encountered under the conditions characteristic of high-energy-density plasmas. Here, such conditions occur in the high-density plasma near the laser target, due to the dominance of Stark broadening. A pulsed-power system is used to generate magnetic fields with a peak magnitude of 25 T at the inner-electrode surface in a coaxial configuration. An aluminum target attached to the inner electrode surface is then irradiated by a laser beam to produce the expanding plasma that interacts with the applied azimuthal magnetic field. A line-shape analysis of the Al III 4s-4p doublet (5696 and 5722 A) enables the simultaneous determination of the magnetic field and the electron density. The measured magnetic fields are generally found to agree with those expected in a vacuum based on the pulsed-power system current. Examples of other transitions that can be used to diagnose a wide range of plasma and magnetic field parameters are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of indium zinc oxide thin films by laser-induced breakdown spectroscopy

We have performed spectroscopic analysis of the plasma generated by Nd:YAG ({lambda} = 266 nm) laser irradiation of thin indium zinc oxide films with variable In content deposited by combinatorial pulsed laser deposition on glass substrates. The samples were irradiated in 5 x 10{sup 4} Pa argon using laser pulses of 5 ns duration and 10 mJ energy. The plasma emission spectra were recorded with an Echelle spectrometer coupled to a gated detector with different delays with respect to the laser pulse. The relative concentrations of indium and zinc were evaluated by comparing the measured spectra to the spectral radiance computed for a plasma in local thermal equilibrium. Plasma temperature and electron density were deduced from the relative intensities and Stark broadening of spectral lines of atomic zinc. Analyses at different locations on the deposited thin films revealed that the In/(In + Zn) concentration ratio significantly varies over the sample surface, from 0.4 at the borders to about 0.5 in the center of the film. The results demonstrate that laser-induced breakdown spectroscopy allows for precise and fast characterization of thin films with variable composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lyman-{alpha} radiation of a metastable hydrogen beam to measure electric fields

The interaction between a metastable H(2s) atomic hydrogen beam and an external electric field leads to the emission of the Lyman-{alpha} line. It originates in the Stark mixing of the near-degenerate 2s{sub 1/2} and 2p{sub 1/2} levels separated by the Lamb shift. The quenched radiation proportional to the square of the electric field amplitude is recovered in vacuum by using such an atomic probe beam. We observe the strong enhancement of the signal when the field is oscillating at the Lamb shift frequency. This technique is applied in a plasma, offering an alternative way to measure weak electric fields by direct and non-intrusive means.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Estimation of electron temperature and density of the decay plasma in a laser-assisted discharge plasma extreme ultraviolet source by using a modified Stark broadening method

In order to investigate the plasma expansion behaviors and the electrical recovery process after the maximum implosion in our tin fueled laser-assisted discharge plasma (LDP) 13.5 nm EUV source, we developed and evaluated a cost-efficient spectroscopic method to determine the electron temperature T{sub e} and density n{sub e} simultaneously, by using Stark broadenings of two Sn II isolated lines (5s{sup 2}4f{sup 2}F{sup o}{sub 5/2} - 5s{sup 2}5d{sup 2}D{sub 3/2} 558.9 nm and 5s{sup 2}6d{sup 2}D{sub 5/2} - 5s{sup 2}6p{sup 2}P{sup o}{sub 3/2} 556.2 nm) spontaneously emitted from the plasma. The spatial-resolved evolutions of T{sub e} and n{sub e} of the expansion plasma over 50 to 900 ns after the maximum implosion were obtained using this modified Stark broadening method. According to the different n{sub e} decay characteristics along the Z-pinch axis, the expansion velocity of the electrons was estimated as {approx}1.2 x 10{sup 4} ms{sup -1} from the plasma shell between the electrodes towards the cathode and the anode. The decay time constant of n{sub e} was measured as 183 {+-} 24 ns. Based on the theories of plasma adiabatic expansion and electron-impact ionization, the minimum time-span that electrical recovery between the electrodes needs in order to guarantee the next succeeding regular EUV-emitting discharge was estimated to be 70.5 {mu}s. Therefore, the maximum repetition rate of our LDP EUV source is {approx}14 kHz, which enables the output to reach 125 W/(2{pi}sr).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stark spectroscopy of a probe lithium beam excited with two dye lasers as a technique to study a high-power ion-beam diode

A non-disturbing measurement of electric field distributions is a subject of special interest in plasma physics and high-voltage devices. In this paper we describe a diagnostic technique for remote sensing of electric fields via injection of a probe beam of lithium atoms and cascade excitation of resonance fluorescence with two broadband dye lasers. The fluorescence spectrum was recorded using a monochromator equipped with an optical multi-channel analyser. The magnitude of the local electric field was retrieved from the Stark-shifted components of the 3d-2plithium spectral line. The technique was applied to measurements of the electric field in the applied-B-field high-voltage diode of the 1 TW KALIF ion-beam accelerator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Sources of CP violation from E{sub 6} inspired heterotic string model

Sources of the weak CP violation from the SU{sub L}(3)x SU{sub R}(3)x SU{sub c}(3) subgroup of the E{sub 6} inspired heterotic string model are discussed. It is shown that the number of the Cabibo-Kobayachi-Maskawa like matrices depends on the spontaneous breakdown of the E{sub 6} gauge symmetry and/or supersymmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spatial diagnostics of the laser induced lithium fluoride plasma

We present spatial characteristics of the lithium fluoride plasma generated by the fundamental and second harmonic of a Nd:YAG laser. The plume emission has been recorded spatially using five spectrometers covering the spectral region from 200 nm to 720 nm. The electron density is measured from the Stark broadened line profile of the line at 610.37 nm, whereas the plasma temperature has been determined using the Boltzmann plot method including all the observed spectral lines of lithium. Both the plasma parameters; electron density and plasma temperature decrease with the increase of the distance from the target surface. The thermal conduction towards the target, the radiative cooling of the plasma, and the conversion of thermal energy into kinetic energy are the main mechanisms responsible for the spatially decrease of the plasma parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Active spectroscopic measurements of the bulk deuterium properties in the DIII-D tokamak (invited)

The neutral-beam induced D{sub {alpha}} emission spectrum contains a wealth of information such as deuterium ion temperature, toroidal rotation, density, beam emission intensity, beam neutral density, and local magnetic field strength magnitude Double-Vertical-Line B Double-Vertical-Line from the Stark-split beam emission spectrum, and fast-ion D{sub {alpha}} emission (FIDA) proportional to the beam-injected fast ion density. A comprehensive spectral fitting routine which accounts for all photoemission processes is employed for the spectral analysis. Interpretation of the measurements to determine physically relevant plasma parameters is assisted by the use of an optimized viewing geometry and forward modeling of the emission spectra using a Monte-Carlo 3D simulation code.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗