SEARCH · Engineering Papers

Results for “SHOCK LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Interference effects on the hypersonic, rarefied flow about a flat plate

The Direct Simulatiaon Monte Carlo method is used to study the hypersonic, rarefied flow interference effects on a flat plate caused by nearby surfaces. Calculations focus on shock-boundary-layer and shock-lip interactions in hypersonic inlets. Results are presented for geometries consisting of a flat plate with different leading-edge shapes over a flat lower wall and a blunt-edge flat plate over a 5-degree wedge. The problems simulated correspond to a typical entry flight condition of 7.5 km/s at altitudes of 75 to 90 km. The results show increases in predicted local heating rates for shock-boundary-layer and shock-lip interactions that are quantitatively similar to those observed experimentally at much higher densities.

Wilmoth, Richard G.↗

NASA NTRS2019

Time Accurate Simulation of Nonequilibrium Flow inside the NASA Ames Electric Arc Shock Tube

Numerical investigations of the ow field inside NASA Ames' Electric Arc Shock Tube have been performed. The focus is to simulate the experiments designed to reproduce shock layer radiation layer relevant to Earth re-entry conditions. This paper assess the current computational capability in simulating unsteady nonequilibrium flows in the presence of strong shock waves with state-of-the-art physical models. The technical approach is described with preliminary results presented for one specific ow condition. The numerical problems encountered during the computation of these flows are detailed, along with the methods used to resolve them. Post-shock conditions are discussed and compared to CEA equilibrium prediction.

Bensassi, Khalil↗

NASA NTRS1965

Experimentally measured effects of the wall boundary layer on shock-tube performance

Nitrogen driven gas wall boundary layer effect and hydrogen driver gas thermodynamic effect on shock speed and test time in tube

THERMODYNAMICS↗

NASA NTRS2014

On Parametric Sensitivity of Reynolds-Averaged Navier-Stokes SST Turbulence Model: 2D Hypersonic Shock-Wave Boundary Layer Interactions

Examined is sensitivity of separation extent, wall pressure and heating to variation of primary input flow parameters, such as Mach and Reynolds numbers and shock strength, for 2D and Axisymmetric Hypersonic Shock Wave Turbulent Boundary Layer interactions obtained by Navier-Stokes methods using the SST turbulence model. Baseline parametric sensitivity response is provided in part by comparison with vetted experiments, and in part through updated correlations based on free interaction theory concepts. A recent database compilation of hypersonic 2D shock-wave/turbulent boundary layer experiments extensively used in a prior related uncertainty analysis provides the foundation for this updated correlation approach, as well as for more conventional validation. The primary CFD method for this work is DPLR, one of NASA's real-gas aerothermodynamic production RANS codes. Comparisons are also made with CFL3D, one of NASA's mature perfect-gas RANS codes. Deficiencies in predicted separation response of RANS/SST solutions to parametric variations of test conditions are summarized, along with recommendations as to future turbulence approach.

Hypersonic↗

NASA NTRS1973

A computer program for calculating the perfect gas inviscid flow field about blunt axisymmetric bodies at an angle of attack of 0 deg

A method for the rapid calculation of the inviscid shock layer about blunt axisymmetric bodies at an angle of attack of 0 deg has been developed. The procedure is of an inverse nature, that is, a shock wave is assumed and calculations proceed along rays normal to the shock. The solution is iterated until the given body is computed. The flow field solution procedure is programed at the Langley Research Center for the Control Data 6600 computer. The geometries specified in the program are sphores, ellipsoids, paraboloids, and hyperboloids which may conical afterbodies. The normal momentum equation is replaced with an approximate algebraic expression. This simplification significantly reduces machine computation time. Comparisons of the present results with shock shapes and surface pressure distributions obtained by the more exact methods indicate that the program provides reasonably accurate results for smooth bodies in axisymmetric flow. However, further research is required to establish the proper approximate form of the normal momentum equation for the two-dimensional case.

Zoby, E. V.↗

NASA NTRS1985

Numerical procedure for three-dimensional hypersonic viscous flow over aerobrake configuration

A numerical method, which is simpler and more efficient than others currently in use, is proposed for the computation of the full viscous flow over an aerobrake body in hypersonic stream at high altitude. It treats the shock layer surrounding the blunt forebody and the near wake behind the base simultaneously by formulating the Navier-Stokes equations in conformal and azimuthal-angle coordinates. The computational domain is confined by the body wall, outflow surface and the shock, which is adjusted along the coordinate normal to the wall in the course of iterations. Because of the optimal grid and a well developed alternating direction implicit factorization technique for the governing equations, reasonably accurate results can be obtained with a 28 x 36 x 7 grid and 400 time-marching iterations. Excellent agreement of shock location is found between the present result and the schlieren photograph. Details of the base flow and shear layer impingement on the cylindrical aft body are presented for an adiabatic wall case.

Li, C. P.↗

NASA NTRS1983

An integral analysis of transonic normal shock wave/turbulent boundary layer interactions in internal flow

An approximate integral viscous-inviscid interaction method is presented for calculating the development of a turbulent boundary layer subjected to a normal shock wave induced adverse pressure gradient in an internal axisymmetric flow. The inflow conditions and the downstream pressure are provided for the computation. In the supersonic region of shock pressure rise, the Prandtl-Meyer function is used to couple the viscous and inviscid flows. An analytical model for the coupling process is postulated and appropriate equations are defined. Downstream of the sonic point, one-dimensional inviscid flow is assumed for coupling with the viscous flow. The turbulent boundary layer is calculated using Green's integral lag-entrainment method. Comparisons of the solutions with the experimental data are made for interactions which are unseparated, near separation and separated. For comparison purposes, solutions to the time-dependent, mass-averaged, Navier-Stokes equations incorporating a two-equation, Wilcox-Rubesin turbulence model are also shown. The computed results from the integral method show good agreement with experimental data for unseparated interactions and reasonable agreement with the trend of the viscous effects when the interaction becomes increasingly separated.

Om, D.↗

NASA NTRS2012

Potential of Glassy Carbon and Silicon Carbide Photonic Structures as Electromagnetic Radiation Shields for Atmospheric Re-entry

During high-velocity atmospheric entries, space vehicles can be exposed to strong electromagnetic radiation from ionized gas in the shock layer. Glassy carbon (GC) and silicon carbide (SiC) are candidate thermal protection materials due to their high melting point and also their good thermal and mechanical properties. Based on data from shock tube experiments, a significant fraction of radiation at hypersonic entry conditions is in the frequency range from 215 to 415 THz. We propose and analyze SiC and GC photonic structures to increase the reflection of radiation in that range. For this purpose, we performed numerical optimizations of various structures using an evolutionary strategy. Among the considered structures are layered, porous, woodpile, inverse opal and guided-mode resonance structures. In order to estimate the impact of fabrication inaccuracies, the sensitivity of the reflectivity to structural imperfections is analyzed. We estimate that the reflectivity of GC photonic structures is limited to 38% in the aforementioned range, due to material absorption. However, GC material can be effective for photonic reflection of individual, strong spectral line. SiC on the other hand can be used to design a good reflector for the entire frequency range.

Komarevskiy,Nikolay↗

NASA NTRS2011

Assessment of Computational Fluid Dynamics (CFD) Models for Shock Boundary-Layer Interaction

A workshop on the computational fluid dynamics (CFD) prediction of shock boundary-layer interactions (SBLIs) was held at the 48th AIAA Aerospace Sciences Meeting. As part of the workshop numerous CFD analysts submitted solutions to four experimentally measured SBLIs. This paper describes the assessment of the CFD predictions. The assessment includes an uncertainty analysis of the experimental data, the definition of an error metric and the application of that metric to the CFD solutions. The CFD solutions provided very similar levels of error and in general it was difficult to discern clear trends in the data. For the Reynolds Averaged Navier-Stokes methods the choice of turbulence model appeared to be the largest factor in solution accuracy. Large-eddy simulation methods produced error levels similar to RANS methods but provided superior predictions of normal stresses.

DeBonis, James R.↗

NASA NTRS2019

Time Accurate Simulation of Nonequilibrium Flow Inside the NASA Ames Electric Arc Shock Tube

Numerical investigations of the flowfield inside NASA Ames' Electric Arc Shock Tube have been performed. The focus is to simulate the experiments designed to reproduce shock layer radiation layer relevant to Earth re-entry conditions. This paper assess the current computational capability in simulating time-accurate unsteady nonequilibrium flows in the presence of strong shock waves with state-of-the-art physical models. The technical approach is described with preliminary results presented for one specific flow condition. It was found that the axisymmetric source term generates a numerical instability that appears as shock bending. This instability is time dependent which greatly affects the shock speed. Post-shock conditions are discussed and compared to CEA equilibrium prediction and good agreement was obtained close to the test-section and just behind the shock.

Bensassi, Khalil↗

NASA NTRSDate not supplied

Backshell Radiation Measurements in the EAST Facility for Titan Entry

A new test series was performed in the Electric Arc Shock Tube (EAST) facility, with the aim of reproducing conditions which will be encountered in the backshell of the Dragonfly spacecraft. Measurements of shock-layer radiation from CN Violet, CN Red and C 2 Swan bands are made in mixtures of 2.2% CH 4 in N 2 (by mole) heated by incident shock waves spanning from 3 to 7 km/s. This study focuses on the spectrally and spatially resolved measurement of absolute radiance made with four optical emission spectrometers spanning 220-1400 nm. Comparison with CFD simulations and equilibrium conditions were made. The predicted radiation was found to be between -40% to 100% from the measurements for the nonequilibrium peak radiance, increasing with velocity. At 7 cm/150 μs from the shock front, the discrepancies appear to be larger, ranging from -50 to 200%. Comparison between measured and predicted temperatures and number densities of CN indicate shortcomings in the non-Boltzmann model of CN.

Augustin Tibere-Inglesse↗

NASA NTRSDate not supplied

Backshell Radiation Measurements in the EAST Facility for Titan Entry

Augustin Tibere-Inglesse↗

NASA NTRS1993

Heating analysis for a Lunar Transfer Vehicle at near-equilibrium flow conditions

A heating analysis for a 15.2 m diameter Lunar Transfer Vehicle (LTV) at 0 and 10.6 deg angle of attack for a nominal trajectory through the earth's atmosphere is described. The analysis utilizes the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) with thin-layer, Navier-Stokes, thermochemical nonequilibrium options. Radiative heating levels are calculated using the Langley Optimized RAdiative Nonequilibrium (LORAN) and the Non-EQuilibrium AIr Radiation (NEQAIR) codes. At peak heating, the shock layer is substantially in equilibrium. Comprehensive spatial and spectral grid convergence studies have been implemented to quantify grid effects on the convective and radiative heating levels. Axisymmetric tests including the coupled effects of radiative energy transfer show negligible change to the convective heating and a 20 percent reduction in the radiative heating.

Gnoffo, Peter A.↗

NASA NTRS2009

Comparisons of Air Radiation Model with Shock Tube Measurements

This paper presents an assessment of the predictive capability of shock layer radiation model appropriate for NASA s Orion Crew Exploration Vehicle lunar return entry. A detailed set of spectrally resolved radiation intensity comparisons are made with recently conducted tests in the Electric Arc Shock Tube (EAST) facility at NASA Ames Research Center. The spectral range spanned from vacuum ultraviolet wavelength of 115 nm to infrared wavelength of 1400 nm. The analysis is done for 9.5-10.5 km/s shock passing through room temperature synthetic air at 0.2, 0.3 and 0.7 Torr. The comparisons between model and measurements show discrepancies in the level of background continuum radiation and intensities of atomic lines. Impurities in the EAST facility in the form of carbon bearing species are also modeled to estimate the level of contaminants and their impact on the comparisons. The discrepancies, although large is some cases, exhibit order and consistency. A set of tests and analyses improvements are proposed as forward work plan in order to confirm or reject various proposed reasons for the observed discrepancies.

Bose, Deepak↗

NASA NTRS1972

Effects of wind-tunnel disturbances on hypersonic boundary-layer transition. I, II.

An experimental investigation of the dependence on facility disturbance of transition on sharp cones has been made. In Part I, the sound radiated from the turbulent boundary layer on the walls of several facilities was measured with pressure transducers mounted flush with the cone surface. In Part II, a constant current hot-wire anemometer measured free-stream and cone shock layer disturbances in two hypersonic helium tunnels. Comparison of hot-wire results with surface pressure measurements in one of the helium tunnels indicate the latter data provide an accurate indication of the facility disturbance levels. Both studies show that transition Reynolds numbers correlate in terms of facility rms sound disturbance levels provided the laminar boundary layers on the models are similar.

Stainback, P. S.↗

NASA NTRS1986

Shock-wave boundary layer interactions

Presented is a comprehensive, up-to-date review of the shock-wave boundary-layer interaction problem. A detailed physical description of the phenomena for transonic and supersonic speed regimes is given based on experimental observations, correlations, and theoretical concepts. Approaches for solving the problem are then reviewed in depth. Specifically, these include: global methods developed to predict sudden changes in boundary-layer properties; integral or finite-difference methods developed to predict the continuous evolution of a boundary-layer encountering a pressure field induced by a shock wave; coupling methods to predict entire flow fields; analytical methods such as multi-deck techniques; and finite-difference methods for solving the time-dependent Reynolds-averaged Navier-Stokes equations used to predict the development of entire flow fields. Examples are presented to illustrate the status of the various methods and some discussion is devoted to delineating their advantages and shortcomings. Reference citations for the wide variety of subject material are provided for readers interested in further study.

Delery, J.↗

NASA NTRS1977

Evaluation of turbulence models for three primary types of shock-separated boundary layers

Zero-equation (algebraic), one-equation (kinetic energy), and two-equation (kinetic energy plus length scale) turbulence eddy viscosity models were used in computing three basic types of shock-separated boundary-layer flows. The three basic types of shock boundary-layer interaction discussed are: (1) a normal shock wave at transonic speeds, (2) a compression corner shock at supersonic speeds, and (3) an incident oblique shock at hypersonic speeds. The models tested are simple, unmodified models used extensively for incompressible, unseparated flows. A comparison of computed and measured results for the compressible, separated flows described herein indicates that model performance is dependent on flow configuration with no distinct superiority of one model over the other for all three flow configurations.

Coakley, T. J.↗

NASA NTRS1962

CALCULATION OF FLOW FIELDS ABOUT BLUNT BODIES OF REVOLUTION TRAVELING AT ESCAPE VELOCITY

The method of Gravalos for calculating the inviscid flow about blunt supersonic bodies has been applied to the case of a hemisphere-cylinder at escape velocity. Numerical results are presented for the flow variables throughout the shock layer, both near the nose and downstream along the cylinder. The results are compared with data from six flow fields at lower velocities in order to illustrate the effects peculiar to escape-velocity re-entry. The body pressures and shock shapes computed by this method agree well with available experimental data at Mach numbers from 3 to 10, and are correlated fairly well by cylindrical blast-wave parameters.

Body of revolution↗