Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Refractory material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Thick film silicon growth techniques

Silicon ribbon growth experiments were conducted using orifices (dies) fabricated from SiC-SiO2 mixtures, fused quartz, SiC, and fine-grained, high density graphite. The best results were obtained from graphite dies. A number of different approaches was tried in modifying the thermal gradient in the dies and in holding the dies. The best results here were obtained from a 0.25-in. thick Mo disc holding a graphite die directly and fitting the die quite closely. Ribbon growths as wide as 9 mm were obtained, while the longest ribbon was 450 x 3.5 x 0.5 mm. Resistivities of ribbons grown from graphite dies have been measured over the range of 0.03 to 1.6 ohm-cm. Some thoughts and literature findings are presented regarding refractory oxide materials as potential orifices.

Bates, H. E.↗

Acceleration processes in the quasi-steady magnetoplasmadynamic discharge

The flow field characteristics within the discharge chamber and exhaust of a quasi-steady magnetoplasmadynamic (MPD) arcjet were examined to clarify the nature of the plasma acceleration process. The observation of discharge characteristics unperturbed by insulator ablation and terminal voltage fluctuations, first requires the satisfaction of three criteria: the use of refractory insulator materials; a mass injection geometry tailored to provide propellant to both electrode regions of the discharge; and a cathode of sufficient surface area to permit nominal MPD arcjet operation for given combinations of arc current and total mass flow. The axial velocity profile and electromagnetic discharge structure were measured for an arcjet configuration which functions nominally at 15.3 kA and 6 g/sec argon mass flow. An empirical two-flow plasma acceleration model is advanced which delineates inner and outer flow regions and accounts for the observed velocity profile and calculated thrust of the accelerator.

Boyle, M. J.↗

Single isotope fractionation of (16)O(-) implications for early history of solar system

Chemical fractionation processes are investigated with emphasis on selective single isotope fractionation in polyisotopic systems, particularly in oxygen. The related temperature parameters of meteoritic condensates and of their source medium are investigated by a thermometric method that is independent of assumptions regarding temperatures and pressures in the solar nebula. The crucial nonlinear chemical fractionation of O-16 was demonstrated experimentally. The effect was achieved in condensed CO2 formed from CO with C-12 O-16 selectively excited by H Ly alpha. The effect was verified by mass spectrometric measurements. The meteorite paleotemperature estimates were advanced from defining only thermal exposure to evaluating time and temperature independently. Grain temperatures at condensation of refractory inclusion materials are indicated to be less than 900 K in agreement with radiation temperature considerations and observations in circumstellar dust shells.

Arrhenius, G.↗

Dust environment of Comet Halley

Advances in the understanding of comet Halley's dust environment are highlighted. Spacecraft results on the dust composition, the detection of subfemtogram grains, and the particle-mass distribution; jets and the dust-emission pattern; the existence of discrete sources on the nucleus surface and the determination of their locations from day-to-day motions of coma features; CN jets; large-scale phenomena, including an antitail, streamers, and a sunward spike; infrared observations, such as the 3.4 microns emission feature, applications of array detectors, and rare far-infrared data; the chemical modification of low-temperature ices by UV and cosmic-ray irradiation processes, their laboratory simulations, and applications to the evolution of comets; the interstellar-connection models of comet origin; and the formation of a mantle made of refractory organic material on the nucleus surface.

Sekanina, Z.↗

Meteoroid ablation in Neptune's atmosphere

Meteoroid ablation in the Neptune atmosphere can influence the chemistry of the upper atmosphere through the supply of oxygen, in the case of water-ice meteoroid ablation, which will eventually be converted to CO in the upper atmosphere, and through the ablation and recondensation of relatively refractory meteoroid material, which leads to the production of dust particles that can act as sites for lower-atmosphere condensation of hydrocarbons. An analysis is presently made of ablation rate calculation uncertainties. The ablation equations presented are applicable to other planets.

Moses, Julianne I.↗

Instrumented Bolts Would Measure Shear Forces In Joints

Bolts instrumented with strain gauges used to measure shear forces. Bolts installed in multiple-bolt lap joints to obtain data on distribution of stresses and deformations in and around joints. Strain gauges indicate share of applied load borne by each individual bolt. In original application, bolted panels made of advanced refractory composite materials designed to withstand use at temperatures up to 4,000 degrees F. Also applicable to other joint materials and measurement of shear loads in other connections such as, shear loads on shafts in pulleys or gears.

Sawyer, James Wayne↗

Carbon-carbon piston development

A new piston concept, made of carbon-carbon refractory-composite material, has been developed that overcomes a number of the shortcomings of aluminum pistons. Carbon-carbon material, developed in the early 1960's, is lighter in weight than aluminum, has higher strength and stiffness than aluminum and maintains these properties at temperatures over 2500 F. In addition, carbon-carbon material has a low coefficient of thermal expansion and excellent resistance to thermal shock. An effort, called the Advanced Carbon-Carbon Piston Program was started in 1986 to develop and test carbon-carbon pistons for use in spark ignition engines. The carbon-carbon pistons were designed to be replacements for existing aluminum pistons, using standard piston pin assemblies and using standard rings. Carbon-carbon pistons can potentially enable engines to be more reliable, more efficient and have greater power output. By utilizing the unique characteristics of carbon-carbon material a piston can: (1) have greater resistance to structural damage caused by overheating, lean air-fuel mixture conditions and detonation; (2) be designed to be lighter than an aluminum piston thus, reducing the reciprocating mass of an engine, and (3) be operated in a higher combustion temperature environment without failure.

Gorton, Mark P.↗

Numerical Analysis of Convection/Transpiration Cooling

An innovative concept utilizing the natural porosity of refractory-composite materials and hydrogen coolant to provide CONvective and TRANspiration (CONTRAN) cooling and oxidation protection has been numerically studied for surfaces exposed to a high heat flux high temperature environment such as hypersonic vehicle engine combustor walls. A boundary layer code and a porous media finite difference code were utilized to analyze the effect of convection and transpiration cooling on surface heat flux and temperature. The boundary layer code determined that transpiration flow is able to provide blocking of the surface heat flux only if it is above a minimum level due to heat addition from combustion of the hydrogen transpirant. The porous media analysis indicated that cooling of the surface is attained with coolant flow rates that are in the same range as those required for blocking, indicating that a coupled analysis would be beneficial.

Glass, David E.↗

Numerical Analysis of Convection/Transpiration Cooling

An innovative concept utilizing the natural porosity of refractory-composite materials and hydrogen coolant to provide CONvective and TRANspiration (CONTRAN) cooling and oxidation protection has been numerically studied for surfaces exposed to a high heat flux, high temperature environment such as hypersonic vehicle engine combustor walls. A boundary layer code and a porous media finite difference code were utilized to analyze the effect of convection and transpiration cooling on surface heat flux and temperature. The boundary, layer code determined that transpiration flow is able to provide blocking of the surface heat flux only if it is above a minimum level due to heat addition from combustion of the hydrogen transpirant. The porous media analysis indicated that cooling of the surface is attained with coolant flow rates that are in the same range as those required for blocking, indicating that a coupled analysis would be beneficial.

Glass, David E.↗

Current status of environmental barrier coatings for Si-Based ceramics

Silicon-based ceramics are the leading candidates for high temperature structural components in next generation gas turbine engines. One key drawback of silicon-based ceramics for such an application is volatilization of the protective silica scale in water vapor and the resulting rapid ceramic recession. Therefore, the realization of Si-based ceramics components in advanced gas turbine engines depends on the development of protection schemes from water vapor attack. Currently, plasma-sprayed external environmental barrier coatings (EBCs) arc the most promising approach. In the late 1980s and early 1990s a wide range of refractory oxide materials were tested as coatings on Si-based ceramics to provide protection from hot corrosion. After the discovery of silica volatilization in water vapor in the early 1990s, the focus of EBC development research has been shifted towards the protection from water vapor attack. Experience learned form the earlier coating developmental effort provided the foundation upon which more complex and advanced EBC coatings have been developed. This paper will discuss the brief history and the current status of EBC development for Si-based ceramics with the main focus on water vapor protection.

Lee, K. N.↗

Dust in Cometary Comae: Present Understanding of the Structure and Composition of Dust Particles

In situ probing of a very few cometary comae has shown that dust particles present a low albedo and a low density, and that they consist of both rocky material and refractory organics. Remote observations of solar light scattered by cometary dust provide information on the properties of dust particles in the coma of a larger set of comets. The observations of the linear polarization in the coma indicate that the dust particles are irregular, with a size greater (on the average) than about one micron. Besides, they suggest, through numerical and experimental simulations, that both compact grains and fluffy aggregates (with a power law of the size distribution in the -2.6 to -3 range), and both rather transparent silicates and absorbing organics are present in the coma. Recent analysis of the cometary dust samples collected by the Stardust mission provide a unique ground truth and confirm, for comet 81P/Wild 2, the results from remote sensing observations. Future space missions to comets should, in the next decade, lead to a more precise characterization of the structure and composition of cometary dust particles.

Levasseur-Regourd, A. C.↗

Organic synthesis associated with serpentinization and carbonation on early Mars

Water-rock interactions are relevant to planetary habitability, influencing mineralogical diversity and the production of organic molecules. We examine carbonates and silicates in the Martian meteorite Allan Hills 84001 (ALH 84001), using co-located nano-scale analyses, to characterize the nature of water-rock reactions on early Mars. We find complex refractory organic material associated with mineral assemblages that formed by mineral carbonation and serpentinization reactions. The organic molecules are co-located with nanophase magnetite; both formed in situ during water-rock interactions on Mars. Two potentially distinct mechanisms of abiotic organic synthesis operated on early Mars during the late Noachian period (3.9–4.1 Ga).

A. Steele↗

Degradation of Yttria-Stabilized Zirconia in Molten Regolith Electrolysis Applications

The generation of oxygen from lunar resources is an enabling technology to support a sustained human presence on the lunar surface. Molten regolith electrolysis is a promising process for directly electrolyzing lunar regolith, which is primarily a mixture of oxide minerals. During electrolysis, metallic products (Fe, Si) are formed at the cathode and oxygen is produced at the anode. In order to perform electrolysis, the regolith must be molten to enable ionic transport of metallic cations and oxygen anions, requiring an operating temperature of 1600C. Common refractory oxide materials, such as Al2O3 and MgO, undergo rapid degradation due to the high operating temperature and contact with the corrosive molten regolith. This work investigates yttria-stabilized zirconia (YSZ) for molten regolith electrolysis applications. Corrosion studies are presented to elucidate the degradation mechanism of YSZ powders and crucibles exposed to lunar regolith simulants at 1600C. Two regolith simulants are used to represent regolith from the lunar maria (JSC-1A) and the lunar highlands (LHS-1). Degradation of YSZ in contact with regolith simulants is evaluated using SEM/EDS, XRD, and EBSD. Furthermore, a modified molten regolith electrolysis reactor is presented utilizing YSZ at the anode to enable facile collection of oxygen produced during electrolysis.

Kevin Yu↗

Oven rack having integral lubricious, dry porcelain surface

A lubricious glass-coated metal cooking article capable of withstanding repeated heating and cooling between room temperature and at least 500.degree. F. without chipping or cracking the glass coating, wherein the glass coating includes about 0.1 to about 20% by weight of a homogeneously distributed dry refractory lubricant material having a particle size less than about 200 .mu.m. The lubricant material is selected from the group consisting of carbon; graphite; boron nitride; cubic boron nitride; molybdenum (FV) sulfide; molybdenum sulfide; molybdenum (IV) selenide; molybdenum selenide, tungsten (IV) sulfide; tungsten disulfide; tungsten sulfide; silicon nitride (Si.sub.3N.sub.4); TiN; TiC; TiCN; TiO.sub.2; TiAlN; CrN; SiC; diamond-like carbon; tungsten carbide (WC); zirconium oxide (ZrO.sub.2); zirconium oxide and 0.1 to 40 weight % aluminum oxide; alumina-zirconia; antimony; antimony oxide; antimony trioxide; and mixtures thereof.

01 COAL, LIGNITE, AND PEAT↗

Zeolite-based SCR catalysts and their use in diesel engine emission treatment

A catalyst comprising a zeolite loaded with copper ions and at least one trivalent metal ion other than Al.sup.+3, wherein the catalyst decreases NO.sub.x emissions in diesel exhaust. The trivalent metal ions are selected from, for example, trivalent transition metal ions, trivalent main group metal ions, and/or trivalent lanthanide metal ions. In particular embodiments, the catalysts are selected from Cu--Fe-ZSM5, Cu--La-ZSM-5, Fe--Cu--La-ZSM5, Cu--Sc-ZSM-5, and Cu--In-ZSM5. The catalysts are placed on refractory support materials and incorporated into catalytic converters.

36 MATERIALS SCIENCE↗

Zeolite-based SCR catalysts and their use in diesel engine emission treatment

A catalyst comprising a zeolite loaded with copper ions and at least one trivalent metal ion other than Al.sup.+3, wherein the catalyst decreases NO.sub.x emissions in diesel exhaust. The trivalent metal ions are selected from, for example, trivalent transition metal ions, trivalent main group metal ions, and/or trivalent lanthanide metal ions. In particular embodiments, the catalysts are selected from Cu--Fe-ZSM5, Cu--La-ZSM-5, Fe--Cu--La-ZSM5, Cu--Sc-ZSM-5, and Cu--In-ZSM5. The catalysts are placed on refractory support materials and incorporated into catalytic converters.

36 MATERIALS SCIENCE↗

Alternative Crucible Materials

This is a presentation for the JFCS joint ERWG/SSWG meeting to be held next week (May 15-17). It is a presentation on alternative materials for crucibles including BeO, HfN coated Nb, and UO2. It will be presented at the INL with South Korean foreign nationals present.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗