Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

An extension of the localized artificial diffusivity method for immiscible and high density ratio flows

The localized artificial diffusivity (LAD) method is widely regarded as the preferred multi-material regularization scheme for the compact finite difference method, because it is conservative, easy to implement, and generally robust for a wide range of multi-material problems. However, traditional LAD methods face significant challenges when applied to flows with large density ratios and when maintaining thermodynamic equilibrium across material interfaces. These limitations arise from the formulation of the artificial diffusivity flux and the reliance on enthalpy diffusion for interface regularization. Additionally, traditional LAD methods struggle to ensure stability under large density ratio conditions, fail to maintain a finite interface thickness, and are therefore unsuitable for modeling immiscible interfaces. Here, in this work, we discuss the origins of these issues in traditional LAD methods and propose modifications which enable the simulation of large density ratio and immiscible flows. The proposed method targets the artificial diffusion fluxes at gradients and ringing in the volume fraction, rather than the mass fraction in traditional methods, to consistently regularize large density ratio interfaces. Furthermore, the proposed method introduces an artificial bulk density diffusion term to enforce equilibrium conditions across interfaces. To address the challenge of modeling immiscible flows, a conservative diffuse interface term is incorporated into the formulation to ensure a finite interface thickness. Specific consideration is taken in the design of the method to ensure that these crucial properties are maintained for N -material flows. The effectiveness of the proposed method is demonstrated through a series of canonical test cases, and its accuracy is validated by comparison with experimental data on micro-bubble collapse in water. These results highlight the method’s robustness and its ability to overcome the limitations of traditional LAD approaches.

Artificial diffusivity↗
DOE OSTI2023

Investigation of potential polyatomic interferences on uranium isotope ratio measurements for the LS-APGD-Orbitrap MS system

The determination of actinide (e.g., U and Pu) content and isotopics is of importance to the nuclear forensics and safeguards communities. However, in the analysis of environmental samples, such as those collected by the International Atomic Energy Agency, uranium measurements can be complicated by isobaric interferences from polyatomic variants of heavy elements (e.g., Pb). This leads to complex, time-consuming sample manipulations (i.e., separations) before determining isotope ratios. An alternative strategy to sample pretreatment is to use high-resolution mass spectrometric platforms during the analysis to fully resolve the uranium isotopes from potential polyatomic interferences, negating the need for prior chemical separation. The liquid sampling - atmospheric pressure glow discharge (LS-APGD) coupled with an Orbitrap mass spectrometer provides a high-resolution (>70,000 m/Δm at m/z 200) inorganic mass spectrometry platform. Further, as a demonstration of the power of this instrumental platform, and indeed, the high-resolution approach in general, uranium isotope ratios were determined in the presence of elemental impurities (e.g., Pb, Pt, Ta, W) commonly encountered with environmental sample swipe analysis, without any prior treatment. Even at elemental impurity concentrations of 1000–5000× relative to uranium, no interference was observed with the 235 U or 238 U signal. In addition, the 235 U/ 238 U isotope ratio for the samples with the concomitants present are within 2 standard deviations of the values obtained without their addition, indicating that these impurities do not impact the determined uranium isotope ratio. These findings represent a significant first step in leveraging the high resolution of the LS-APGD-Orbitrap-MS to overcome isobaric and molecular interferences instead of relying on chemical separations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Absolute Branching Ratios of Prominent $γ$ Rays Following $α$ Decay of 233 U

The absolute $γ$-ray branching ratios (emission probabilities) for 19 prominent peaks in the $α$ decay of 233 U are reported with energies ranging from 97 to 366 keV. The branching ratios were obtained from $α-γ$ coincidence measurements, normalized to the $α$ singles. The high-purity 233 U material (> 99.98%) was separated from its decay products before preparation of a 4.74-mg/cm 2 uranyl nitrate foil with a 6-mm diameter. Furthermore, this is the first report on the absolute normalization of the branching ratios since 1984 and it is the only measure by $α-γ$ coincidences, where the $α-γ/α$ ratio removes several potential systematic biases. Overall, the results are consistent with the adopted literature, and they validate the quantities most relevant to the non-destructive assay of fissile 233 U material, which is relevant to the thorium fuel cycle and associated safeguards.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Controls on the 36 Cl/Cl input ratio of paleo-groundwater in arid environments: New evidence from 81 Kr/Kr data

In this study, measurements of the long-lived 81 Kr and 36 Cl radioisotopes in groundwater from the Negev Desert (Israel) were used to assess the 36 Cl/Cl input ratios and Cl – contents for paleorecharge into the Nubian Sandstone Aquifer (NSA). The reconstructed Cl – content of the recharge flux was on the order of 300–400 mg/L. An initial 36 Cl/Cl ratio of 50 × 10 –15 was assessed for the groundwater replenishment in the Negev Desert since the late Pleistocene, in agreement with the 36 Cl/Cl ratios in recent local rainwater. This is despite possible changes in the climatic conditions and the 36 Cl production rates in the atmosphere over this timeframe. This similarity in values is explained by the major role played by the erosion and weathering of near-surface materials in the desert environment that dominate the hydrochemistry of rains, floods, and the consequent groundwater recharge. Spatial variation in the reconstructed initial 36 Cl/Cl ratio is accounted for by the differences in the mineral aerosol sources for specific recharge areas of the NSA. Accordingly, regional variations in the 36 Cl/Cl input in groundwater reservoirs surrounding the Mediterranean Sea indicate various processes that govern the 36 Cl/Cl system. Finally, the results of this study highlight the great advantage of integrating 81 Kr age information in evaluating the initial 36 Cl/Cl and Cl – input, which is essential for the calibration of 36 Cl radioisotope as an available long-term dating tool for a given basin.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Pathways towards break even for low convergence ratio direct-drive inertial confinement fusion

Following indirect-drive experiments which demonstrated promising performance for low convergence ratios (below 17), previous direct-drive simulations identified a fusion-relevant regime which is expected to be robust to hydrodynamic instability growth. This paper expands these results with simulated implosions at lower energies of 100 and 270 kJ, and ‘hydrodynamic equivalent’ capsules which demonstrate comparable convergence ratio, implosion velocity and in-flight aspect ratio without the need for cryogenic cooling, which would allow the assumptions of one-dimensional-like performance to be tested on current facilities. A range of techniques to improve performance within this regime are then investigated, including the use of two-colour and deep ultraviolet laser pulses. Finally, further simulations demonstrate that the deposition of electron energy into the hotspot of a low convergence ratio implosion through auxiliary heating also leads to significant increases in yield. Results include break even for 1.1 MJ of total energy input (including an estimated 370 kJ of short-pulse laser energy to produce electron beams for the auxiliary heating), but are found to be highly dependent upon the efficiency with which electron beams can be created and transported to the hotspot to drive the heating mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Tunable Atomic Layer Deposition into Ultra-High-Aspect-Ratio (>60000:1) Aerogel Monoliths Enabled by Transport Modeling

Atomic layer deposition (ALD) modification of ultra-high-aspect-ratio structures (>10,000:1) is a powerful platform with applications in catalysis, filtration, and energy conversion. However, the deposition of conformal and tunable ALD coatings at these aspect ratios remains challenging, resulting in empirical tradeoffs between precursor utilization and reaction time. Here, we demonstrate tunable control of the ALD infiltration depth into an aerogel monolith (AM) and develop a reaction-diffusion model to accurately describe the coating process. Specifically, we investigate the ALD exposure time and precursor dose needed to conformally coat a silica AM with pore sizes of ~20 nm, a monolith thickness of ~2.5 mm, and aspect ratios exceeding 60,000:1. We demonstrate complete infiltration into the AM, which is quantified by elemental mapping. A reaction-diffusion model is developed, which accounts for multiple doses and precursor depletion in the ALD chamber during an exposure step. The experimentally validated model enables the prediction and tuning of infiltration depth into a tortuous, high-aspect-ratio structure such as an AM, allowing for the synthesis of rationally designed material architectures. Additionally, the model allows for co-optimization of the total deposition time and percentage of unreacted precursor, which are important for the manufacturability and sustainability of ALD processing. Lastly, we demonstrate that ultra-thin ALD Al 2 O 3 coatings can be used to stabilize silica AMs against structural degradation under high-temperature annealing conditions (700-800 °C), by limiting changes in surface area and monolith volume. As a result, this improved high-temperature stability has implications for numerous aerogel applications, including catalysis and thermal insulation.

14 SOLAR ENERGY↗
DOE OSTI2023

Computational Study on the Effect of Thermal Boundary Conditions and Axial Aspect Ratio on Catalytic Oxidative Coupling of Methane

Packed-bed reactor models with a large reactor-diameter-to-particle-diameter ratio (N > 10) are commonly used in catalysis research. Their use is underpinned by strong simplifying assumptions including unidirectional plug flow, negligible radial gradients, small axial diffusion, and isothermal operation. However, the complex exothermic–endothermic nature of reactions like oxidative coupling of methane (OCM) coupled with heat transfer from the catalyst surface and convective heat losses from the reactor wall provides an interesting case study to evaluate packed-bed assumptions and understand axial and radial temperature variations that may impact conversion and selectivity. This computational study investigates the effect of thermal boundary conditions on catalyst performance in laboratory OCM reactors (N = ~13) through computational fluid dynamics (CFD) simulation. Further, the 1-D model typically used for modeling plug flow reactors assumes negligible radial temperature and species concentration gradients. This assumption is evaluated for OCM reactors over a range of geometric axial aspect ratios, defined as the reactor length divided by the diameter, comparing the 1-D with 3-D CFD results. 1-D model predictions of catalyst performance start to deviate from the 3-D model predictions as the axial aspect ratio decreases, specifically as diameter increases at constant length. In the work, the 1-D model assumption is only found to be valid for axial aspect ratios higher than 1.6, a result considered to be relevant for all exothermic catalytic reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Convective-To-Total Precipitation Ratio and the “Drizzling” Bias in Climate Models

Overestimation of precipitation frequency and duration while underestimating intensity, that is, the “drizzling” bias, has been a long-standing problem of global climate models. Here we explore this issue from the perspective of precipitation partitioning. We found that most models in the Climate Model Intercomparison Project Phase 5 (CMIP5) have high convective-to-total precipitation (PC/PR) ratios in low latitudes. Convective precipitation has higher frequency and longer duration but lower intensity than non-convective precipitation in many models. As a result, the high PC/PR ratio contributes to the “drizzling” bias over low latitudes. The PC/PR ratio and associated “drizzling” bias increase as model resolution coarsens from 0.5° to 2.0°, but the resolution's effect weakens as the grid spacing increases from 2.0° to 3.0°. Some of the CMIP6 models show reduced “drizzling” bias associated with decreased PC/PR ratio. Thus, more reasonable precipitation partitioning, along with finer model resolution should alleviate the “drizzling” bias within current climate models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Source Characterization of the Declared North Korean Nuclear Tests From Regional Distance Coda Wave Spectral Ratios

Abstract Seismic observations of underground nuclear explosions provide crucial data on source yield and depth that cannot easily be estimated from other geophysical methods. However, it is difficult to obtain reliable yield estimates for test sites for which we do not have direct seismic calibration experiments. To obtain source information from uncalibrated sites and paths, local and regional seismic records of six, proximal, declared underground nuclear explosions in North Korea are used to compute spectral ratios of narrow‐band waveform envelopes of body‐wave coda that remove path and site effects to reveal precise, relative source moment. The yields of these explosions are obtained from the observed source ratios by simultaneously fitting the classical source model of Mueller and Murphy (1971), https://doi.org/10.1785/bssa0610061675 to all event pairs. The source model provides an impressive fit to the observations considering that the P phase coda derived source spectral ratios did not require a prior knowledge of the source or regionally calibrated corrections to be applied to the data. However, the observed corner frequencies from S wave coda spectral ratios are lower than the source model predictions, but are well fit by models calculated using the corner frequency consistent with the Fisk conjecture. The results presented here provide novel constraints on the spectral distributions of the energy radiated by the sources of the DPRK test series, and allows for an independent evaluation of existing estimated source model parameters.

58 GEOSCIENCES↗
DOE OSTI2022

Global gyrokinetic study of shaping effects on electromagnetic modes at NSTX aspect ratio with ad hoc parallel magnetic perturbation effects

Plasma shaping may have a stronger effect on global turbulence in tight-aspect-ratio tokamaks than in conventional-aspect-ratio tokamaks due to the higher toroidicity and more acute poloidal asymmetry in the magnetic field. In addition, previous local gyrokinetic studies have shown that it is necessary to include parallel magnetic field perturbations in order to accurately compute growth rates of electromagnetic modes in tight-aspect-ratio tokamaks. In this work, the effects of elongation and triangularity on global, ion-scale, linear electromagnetic modes are studied at National Spherical Torus Experiment (NSTX) aspect ratio and high plasma β using the global gyrokinetic particle-in-cell code XGC. The effects of compressional magnetic perturbations are approximated via a well-known modification to the particle drifts that was developed for flux-tube simulations [Joiner et al., Phys. Plasmas 17, 072104 (2010)], without proof of its validity in a global simulation, with the gyrokinetic codes GENE and GEM being used for local verification and global cross-verification. Magnetic equilibria are re-constructed for each distinct plasma profile that is used. Coulomb collision effects are not considered. Within the limitations imposed by the present study, it is found that linear growth rates of electromagnetic modes (collisionless microtearing modes and kinetic ballooning modes) are significantly reduced in a high-elongation and high-triangularity NSTX-like geometry compared to a circular NSTX-like geometry. For example, growth rates of kinetic ballooning modes at high- β are reduced to the level of that of collisionless trapped electron modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Plasma Focused Ion Beam Milling of High-Aspect-Ratio Holes in Diamond

Plasma focused ion beam (PFIB) technology has a great potential for applications requiring rapid micro-machining of high-aspect-ratio features. Here, we use 30-keV Ar, Xe, and O 2 ion beams to study PFIB milling of high-aspect-ratio circular holes in polycrystalline diamond. Our results show that Xe and O 2 ion beams have the highest milling efficiency for low-aspect-ratio and high-aspect-ratio hole milling, respectively. Each ion beam species produces holes with its characteristic shape and wall surface morphology. In conclusion, based on these results, we demonstrate a “hybrid” hole milled in a two-step process with Xe and O 2 ion beams with the geometry and wall morphology attractive for the attachment of a fuel fill tube to the inertial confinement fusion capsule.

ICF targets↗
DOE OSTI2025

Benchmark of the Fe xvv 𝓡 ratio in photoionized plasma during eclipse of Centaurus X-3 with XRISM/Resolve

The $\mathcal {R}$ ratio is a useful diagnostic of the X-ray emitting astrophysical plasmas and is defined as the intensity ratio of the forbidden over the inter-combination lines in the K$\alpha$ line complex of He-like ions. The value is altered by excitation processes (electron impact or UV photoexcitation) from the metastable upper level of the forbidden line, thereby constraining the electron density or UV field intensity. The diagnostic has been applied mostly in electron density constraints in collisionally ionized plasmas using low-Z elements, as was originally proposed for the Sun (Gabriel & Jordan, 1969a, MNRAS, 145, 241), but it can also be used in photoionized plasmas. To make use of this diagnostic, we need to know its value in the limit of no excitation of metastables ($\mathcal {R}_{0}$), which depends on the element, how the plasmas are formed, how the lines are propagated, and the spectral resolution affecting line blending principally with satellite lines from Li-like ions. We benchmark $\mathcal {R}_0$ for photoionized plasmas by comparing calculations using radiative transfer codes and observation data taken with the Resolve X-ray microcalorimeter onboard XRISM. We use the Fe xxv He$\alpha$ line complex of the photo-ionized plasma in Centaurus X-3 observed during eclipse, in which the plasma is expected to be in the limit of no metastable excitation. The measured $\mathcal {R} = 0.65 \pm 0.08$ is consistent with the value calculated using xstar for the plasma parameters derived from other line ratios of the spectrum. We conclude that the $\mathcal {R}$ ratio diagnostic can be used for high-Z elements such as Fe in photoionized plasmas, which has wide applications in plasmas around compact objects at various scales.

X-rays: binaries↗
DOE OSTI2020

Precise β branching-ratio measurement for the 0 + → 0 + superallowed decay of 34 Ar

We have measured the branching ratio for the superallowed 0 + → 0 + β transition from 34 Ar to be 0.9448(8), and determined its ft value to be 3058.1(28) s, a result with ±0.09% precision, which is a factor of three improvement over the previous result based on current world data. The ft-value ratio for the mirror pair of superallowed transitions 34 Ar → 34 Cl and 34 Cl → 34 S, becomes the most precise yet measured and, in a sensitive test of the method used to calculate the isospin-symmetry-breaking correction, δ C , it agrees well with the ratio as calculated with Woods-Saxon radial wave functions. This confirms the method used in the most recent survey of superallowed decays to extract V ud , the up-down quark-mixing element of the Cabibbo-Kobayashi-Maskawa matrix. Additionally, our branching-ratio results for the four observed Gamow-Teller branches to 1 + states in 34 Cl are shown to agree well with shell-model calculations based on the same effective interactions that were used in the determination of δ C .

39 ≤ A ≤ 58↗
DOE OSTI2022

Proton branching ratios of 23 Mg levels

Background: The anomalous 22 Ne abundance measured in certain presolar graphite grains is thought to arise from the decay of 22 Na that was synthesized at high temperatures in core-collapse supernovae. To better interpret this abundance anomaly, the primary destruction mechanism of 22 Na, the 22 Na(p,γ) 23 Mg reaction, must be better understood. Purpose: Determine proton branching ratios of several 23 Mg excited states that play a role in the high-temperature 22 Na(p,γ) 23 Mg reaction rate. Methods: Particle decays of 23 Mg excited states populated with the previously reported 24 Mg(p,d) 23 Mg transfer reaction measurement [Kwag et al., Eur. Phys. J. A 56, 108 (2020)] were analyzed to extract proton branching ratios. The reaction was studied using a 31-MeV proton beam from the Holifield Radioactive Ion Beam Facility of Oak Ridge National Laboratory and 24 Mg solid targets. Results: Proton branching ratios of several 23 Mg excited states in the energy range of Ex = 8.044 - 9.642 MeV were experimentally determined for the first time for the p0 and p1'(p1+p2+p3) decay channels. Conclusions: These new branching ratios for 23 Mg levels can provide an experimental foundation for an improved high-temperature rate of the 22 Na(p,γ) 23 Mg reaction needed to understand production of anomalously high 22 Ne abundance in core-collapse supernovae.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Investigating effects of relativistic kinematics, dimensionality, interactions, and short-range correlations on the ratio of quartic over quadratic nuclear symmetry energies

While ample evidence for the so-called empirical parabolic law of the Equation of State (EOS) of isospin asymmetric nuclear matter (ANM) has been obtained in many studies within both non-relativistic and relativistic nuclear many-body theories using various interactions, it has been unclear if there is any fundamental physics reason for the small quartic symmetry energy compared to the quadratic one even as the ANM approaches pure neutron matter. Within both relativistic and non-relativistic Free Fermi Gas (FFG) models in coordinate spaces of arbitrary dimension d with and without considering Short-Range Correlations (SRC) as well as non-linear Relativistic Mean Field (RMF) models, we study effects of relativistic kinematics, dimensionality, interactions and SRC on the ratio Ψ(ρ) of quartic over quadratic symmetry energies in ANM EOSs. We found that the ratio Ψ(ρ) in the FFG model depends strongly on the dimension d. While it is very small already in the normal 3D space, it could be even smaller in spaces with reduced dimensions for sub-systems of particles in heavy-ion reactions and/or whole neutron stars due to constraints, collectivities and/or symmetries. Here, we also found that the ratio Ψ(ρ) could theoretically become very large only at the ultra-relativistic limit far above the density reachable in neutron stars. On the other hand, nuclear interaction directly and/or indirectly through SRC-induced high-momentum nucleons affect significantly the density dependence of Ψ(ρ) compared to the relativistic FFG model prediction. The SRC affects significantly not only the kinetic energy of symmetric nuclear matter but also the ratio Ψ(ρ) while the relativistic corrections are found negligible. The results may help better understand the EOS of dense neutron-rich matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Probing the high-density nuclear symmetry energy with the Ξ – / Ξ 0 ratio in heavy-ion collisions at s N N ≈ 3 GeV

Recent beam energy scan experiments at the BNL Relativistic Heavy Ion Collider by the STAR Collaboration found that hadronic interactions dominate the collective flow and the proton cumulant ratios are driven by baryon number conservation in a region of high baryon density in √ s NN = 3 GeV Au + Au reactions, indicating that the dense medium formed in such collisions is likely hadronic matter. Within an updated a relativistic transport model with momentum dependent isoscalar and isovector single-nucleon mean-field potentials corresponding to different symmetry energies at suprasaturation densities, the n/p, π – /π + , $K$ $^{0}_{s}$/K + , Σ – /Σ + , and Ξ – /Ξ 0 ratios are studied for central Au + Au collisions at √ s NN = 3 GeV, where the maximum central density reaches about (3.6–4.0) ρ 0 . The doubly strange Ξ – /Ξ 0 ratio is found to have the strongest sensitivity to the variation of high-density nuclear symmetry energy. Furthermore, the Ξ – /Ξ 0 ratio in relativistic heavy-ion reactions at √ s NN~3 GeV may help probe sensitively the poorly known symmetry energy of dense neutron-rich matter critically important for understanding various properties of neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Sex ratio of Western Bluebirds ( Sialia mexicana ) is mediated by phenology and clutch size

Mothers may produce more of one sex to maximize their fitness if there are differences in the cost of producing each sex or there are differences in their relative reproductive value. Breeding date and clutch size are known to influence offspring sex ratios in birds through sex differences in dispersal, social behaviours, differential mortality and available food resources. We tested whether breeding date, clutch size and drought conditions influenced offspring sex ratios in a sexually size-monomorphic species, the Western Bluebird Sialia mexicana, by interrogating a 21-year dataset. After controlling for differential mortality, we found that hatch dates late in the breeding season were associated with the production of more females, suggesting that the value of producing males declines as the breeding season progresses. When clutch size was taken into account, small clutches yielded significantly more females late in the breeding season than in the early and middle parts of the breeding season, which produced significantly more males. Here, large clutches early in the season tended to produce more females, although this was not significant. Drought severity was not correlated with sex ratio adjustment. We propose and discuss several explanations for these patterns, including male offspring, but not female offspring, acting as helpers, increased female nestling provisioning late in the breeding season, differences in food abundance and egg-laying order. Future work will help to uncover the mechanisms leading to these patterns. Identifying patterns and mechanisms of sex ratio skew from long-term datasets is important for informing predictions regarding life-history trade-offs in wildlife populations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Knockout of the lignin pathway gene BnF5H decreases the S/G lignin compositional ratio and improves Sclerotinia sclerotiorum resistance in Brassica napus

Ferulate-5-hydroxylase is a key enzyme involved in the conversion of the guaiacyl monolignol to the syringyl monolignol in angiosperms. The monolignol ratio has been proposed to affect biomass recalcitrance and the resistance to plant disease. Stem rot caused by the fungus Sclerotinia sclerotiorum in Brassica napus causes severe losses in its production. To date, there is no information about the effect of the lignin monomer ratio on the resistance to S. sclerotiorum in B. napus. Four dominantly expressed ferulate-5-hydroxylase genes were concertedly knocked out by CRISPR/Cas9 in B. napus, and three mutant lines were generated. The S/G lignin compositional ratio was decreased compared to that of the wild type based on the results of Mӓule staining and 2D-NMR profiling in KO-7. The resistance to S. sclerotiorum in stems and leaves increased for the three f5h mutant lines compared with WT. Furthermore, we found that the stem strength of f5h mutant lines was significantly increased. Overall, we demonstrate for the first time that decreasing the S/G ratio by knocking out of the F5H gene improves S. sclerotiorum resistance in B. napus and increases stem strength.

59 BASIC BIOLOGICAL SCIENCES↗