Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiative capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Influence of carrier trapping on radiation detection properties in $\mathrm{CVD}$ grown 4H-SiC epitaxial layers with varying thickness up to 250 µm

We report low doped n-type 4H-SiC epitaxial layers of thickness 50, 150, and 250 µm grown by hot wall chemical vapor deposition were used to fabricate Ni/4H-SiC Schottky radiation detectors. The epitaxial layers were grown on the (0001) face of highly conductive bulk 4H-SiC substrates 8° offcut towards the $\langle 11\bar{2}1\rangle$ direction. The 50, 150, and 250 µm thick epilayer detectors, under optimized settings, showed energy resolutions of 2.0%, 0.78%, and 0.63%, respectively for 5.48 MeV alpha particles. Deep level transient spectroscopy studies showed that the observed variation in the detector resolution is linked to the defect parameters in the devices. Least-squares fitting of the bias dependence of the charge collection efficiency according to a drift-diffusion model, revealed minority carrier diffusion lengths of 16, 10, and 9.2 µm, respectively, implying that the detectors are not limited by minority carrier trapping. The detector performance was observed to be primarily dependent on the concentration and capture cross-sections of the lifetime killing electron traps Z 1/2 and EH 6/7 .

36 MATERIALS SCIENCE↗

Milestone 1.2.15: Feasibility of In Situ Accelerated Aluminum Coupon Radiolysis by Synchrotron X-Rays

Extended dry storage of aluminum-clad spent nuclear fuel (ASNF) requires an assessment of the radiolytic generation of molecular hydrogen gas (H2) from the ASNF’s corrosion layers. H2 accumulation can potentially lead to storage canister embrittlement/rupture and the accumulation of flammable gas mixtures in accident scenarios. To date, computational models have been developed for the prediction of radiolytic H2 generation from samples exposed to lower absorbed dose regimes (up to ~3 MGy). However, greater accuracy is needed for higher absorbed doses (> 25 MGy) where the concentration of H2 ultimately reaches a steady-state. Data in this area is limited due to the amount of time taken (months) to accumulate such high gamma doses. Furthermore, a recent study observed radiation-induced damage to the surface of pre-corroded aluminum alloy coupons at high absorbed gamma doses. Despite this observation and its implications, there is currently no computational connection between the radiolytic formation of H2 and changes in the composition and morphology of the cladding’s corrosion layers with absorbed dose. To develop a better understanding of the processes and effects described above, the present study aimed to evaluate the feasibility of leveraging synchrotron x-ray capabilities for coupled accelerated irradiation and in situ surface characterization of ASNF alloys. To that end, National Synchrotron Light Source II (NSLS-II) beamtime was secured and a series of aluminum alloy 1100 (AA1100) wires, prepared under a variety of conditions, were interrogated using ex situ x-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques at Idaho National Laboratory (INL) and ex situ and in situ XRD capabilities at the NSLS-II x-ray powder diffraction (XPD) beamline. Results indicated that performing synchrotron XRD using the available XPD beamline configuration can provide sufficient radiation dose but cannot discern changes in the composition and morphology of sample corrosion layers. Additionally, ex situ XRD and SEM data from Idaho National Laboratory (INL) indicated that the pre-corrosion of AA1100 wires did not generate an appreciably thick corrosion layer, as compared with previous aluminum coupon studies. These thinner surface corrosion layers were not sufficient for detection by both ex situ and in situ synchrotron XRD, specifically under consideration of the NSLS-II XPD beamline’s configuration primarily capturing information from the sample’s bulk material, i.e., aluminum metal. In summary, the use of the NSLS-II XPD beamline for promoting accelerated radiolysis and in situ surface characterization is not appropriate for this program’s goals.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Model Sensitivities of Biomass-Burning Aerosol Chemical Aging, Sulfate Formation, and Cloud Droplet Activation in the Southeastern Atlantic Using CESM and E3SM

Biomass-burning smoke drives large uncertainty in climate projections of the Earth's radiative balance. This is due to the chemical and physical evolution of smoke and its impact on clouds and radiation. Here we focus on the southeastern Atlantic region and its inflow of African biomass-burning smoke during August 2017. We evaluate smoke properties and processes in two coupled earth-system models, the Energy Exascale Earth System Model (E3SM) and Community Earth System Model (CESM). These are compared against in situ aircraft observations from two field campaigns, ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) and CLoud–Aerosol–Radiation Interaction and Forcing: Year 2017 (CLARIFY-2017). Observations reveal an increase and subsequent decrease in smoke mean diameter, and a steady decrease in the mass ratio of organic aerosol (OA) to black carbon aerosol (BC) (OA:BC) over 4–12 days of aging, neither captured by the base models. Implementation of a photolytic loss scheme for secondary organic aerosol (SOA)—as a proxy for other heterogeneous volatilization chemistry—and a ∼1-day conversion for primary OA to SOA significantly improves the representation of this loss. In the boundary layer, both models show dimethyl sulfide driving a large increase in the sulfate aerosol mass fraction from the free troposphere, which is consistent with observations. Finally, models tend to underpredict cloud droplet number concentration partially due to weak modeled turbulent updraft strength, and model performance improves when the parameterized turbulent updraft strength is increased substantially. These results are expected to provide insights into future model development to reduce climate model uncertainties.

54 ENVIRONMENTAL SCIENCES↗

Identification of dislocation-related and point-defects in III-As layers for silicon photonics applications

Abstract The aim of this paper is to identify, analyze and compare the defects present in III-As, as a function of dislocation density, and as a function of the presence/absence of quantum dots (QDs). Such materials are of fundamental importance for the development of lasers and photodiodes for silicon photonics. The study is based on an extensive deep-level transient spectroscopy investigation, carried out on GaAs pin diodes grown on Si and on GaAs (that differ in the dislocation density), with and without embedded QDs. The original results described in this paper demonstrate that: (a) we were able to identify four different defects within the device grown on Si (three electron and one hole traps) and one defect (hole trap) in the device on GaAs, common to both samples; (b) all the majority carrier traps identified are located near midgap, i.e. are efficient non-radiative recombination centers; (c) such defects are absent (or non-detectable) in the sample grown on GaAs substrate, having a very low dislocation density; (d) the presence of QDs does not result in additional defects within the semiconductor material; (e) the analysis of the capture kinetics revealed that two of the identified traps are related to point defects, whereas the other two traps can be associated with point defects located near a dislocation; (f) a comparison with previous reports indicate that the detected traps are related to native III-As defects, or to oxygen-related complexes.

Physics↗

Daytime cooling efficiencies of urban trees derived from land surface temperature are much higher than those for air temperature

Accurately capturing the impact of urban trees on temperature can help optimize urban heat mitigation strategies. Recently, there has been widespread use of remotely sensed land surface temperature (T s ) to quantify the cooling efficiency (CE) of urban trees. However, remotely sensed T s reflects emitted radiation from the surface of an object seen from the point of view of the thermal sensor, which is not a good proxy for the air temperature (T a ) perceived by humans. The extent to which the CEs derived from T s reflect the true experiences of urban residents is debatable. Therefore, this study systematically compared the T s -based CE (CE T s ) with the T a -based CE (CE T a ) in 392 European urban clusters. CE T s and CE T a were defined as the reductions in T s and T a , respectively, for every 1% increase in fractional tree cover (FTC). The results show that the increase in FTC has a substantial impact on reducing T s and T a in most cities during daytime. However, at night, the response of T s and T a to increased FTC appears to be much weaker and ambiguous. On average, for European cities, daytime CE T s reaches 0.075 °C % -1 , which is significantly higher (by an order of magnitude) than the corresponding CE T a of 0.006 °C % -1 . In contrast, the average nighttime CE T s and CE T a for European cities are similar, both approximating zero. Overall, urban trees can lower daytime temperatures, but the magnitude of their cooling effect is notably amplified when using remotely sensed T s estimates compared to in situ T a measurements, which is important to consider for accurately constraining public health benefits. Our findings provide critical insights into the realistic efficiencies of alleviating urban heat through tree planting.

54 ENVIRONMENTAL SCIENCES↗

IER - 551: Experiment for Unresolved Resonance of Plutonium Actinides (EUROPA): CED-1 for True Intermediate Pu Benchmark

IER-551 or the Experiment for Unresolved Resonance Of Plutonium Actinides (EUROPA), is an experiment campaign to design and execute a series of true intermediate energy plutonium critical configurations. EUROPA is a collaboration between Los Alamos National Laboratory (LANL), Oak Ridge National Laboratory (ORNL), and the French Institut de Radioprotection et de Sûreté Nucléaire (IRSN) to validate current and future evaluations of 239,240 Pu isotopes. Preliminary designs were optimized using Particle Swarm Optimization to save on computation time and the configuration with highest percentage of intermediate neutrons causing fission found was BeO-Cd. This combination has over 70% of fissions occurring from intermediate energy neutrons. Secondary considerations regarding end benchmark uncertainties and quality of nuclear data resulted in a beryllium metal only experiment proposed as the final system. This final preliminary design achieves 68% intermediate fissions, sensitivities of fission and capture cross sections of 239 Pu of 0.3021 and -0.1610 respectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Advancing the Theory of Nuclear Data Evaluations [Abstract]

We present recent advances in the R-matrix formalism as well as the Bayesian evaluation framework for improved nuclear data evaluations. The advances in the R matrix formalism include: 1) direct processes, 2) doorway, as well as multistep, processes, and 3) various forms of the Reich-Moore approximation for eliminated capture channels. Furthermore, to address unreasonably small posterior uncertainties often encountered in nuclear data evaluations of large data sets using the conventional form of the Bayes’ theorem, we introduce imperfections (of the data or the model) as a formal evaluation tool for taming the evaluated uncertainties in harmony with Bayes’ theorem. These theoretical advances were motivated by the nuclear data evaluations of differential resolved resonance cross section data using the code SAMMY, as well as the integral benchmark experiments using the SCALE code system, being performed at Oak Ridge National Laboratory for the Nuclear Criticality Safety Program. Some pedagogical applications of the new formalism, as well as a snapshot of the SAMMY modernization efforts, will be presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Early Stages in the Lifecycle of Polar Liquid-Bearing Clouds

Stratiform liquid-bearing clouds are ubiquitous over the polar regions, where they are predominantly mixed-phase. These polar clouds induce substantial radiative forcing on the surface and continuously modify the atmospheric thermodynamic budget, with direct implications for the polar ice pack resilience. However, the physical representation of these clouds is still a major challenge for climate models. A significant part of polar liquid-bearing cloud lifecycle is often manifested in a quasi-steady self-sustaining, persistent, and turbulent state, which is driven by longwave cloud radiative cooling and can last for multiple days. This self-sustaining cloud lifecycle stage has been thoroughly investigated in numerous studies, though some of its aspects such as precipitation still lack robust quantification and evaluation. The preceding cloud lifecycle stages, which may last up to several hours, have nonetheless remained widely overlooked. These preceding stages initiate at cloud formation, often in a stable and non-turbulent atmospheric layer and serve as a key junction between cloud persistence and cloud dissipation. These two contrasting cloud lifecycle trajectories pose the question if general circulation models (GCMs) can capture the full lifecycle accurately for the real physical reasons, a necessary condition to improve our confidence in climate projections given the changing polar climate. The purpose of this project was to improve the characterization and understanding of these early stages in the lifecycle of polar stratiform liquid-bearing cloud and to aid their representation in GCMs. This research relied on measurements from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign, as well as the observations from the ARM West Antarctic Radiation Experiment (AWARE) and the permanent ARM site at Utqiagvik, North Slope of Alaska (NSA).

58 GEOSCIENCES↗

Improving snow albedo modeling in the E3SM land model (version 2.0) and assessing its impacts on snow and surface fluxes over the Tibetan Plateau

With the highest albedo of the land surface, snow plays a vital role in Earth's surface energy budget and water cycle. Snow albedo is primarily controlled by snow grain properties (e.g., size and shape) and light-absorbing particles (LAPs) such as black carbon (BC) and dust. The mixing state of LAPs in snow also has impacts on LAP-induced snow albedo reduction and surface radiative forcing (RF). However, most land surface models assume that snow grain shape is spherical and LAPs are externally mixed with the snow grains. This study improves the snow radiative transfer model in the Energy Exascale Earth System Model version 2.0 (E3SM v2.0) Land Model (ELM v2.0) by considering non-spherical snow grain shapes (i.e., spheroid, hexagonal plate, and Koch snowflake) and internal mixing of dust–snow, and it systematically evaluates the impacts on the surface energy budget and water cycle over the Tibetan Plateau (TP). A series of ELM simulations with different treatments of snow grain shape, mixing state of BC–snow and dust–snow, and sub-grid topographic effects (TOP) on solar radiation are performed. Compared with two remote sensing snow products derived from the Moderate Resolution Imaging Spectroradiometer, the control ELM simulation (ELM_Control) with the default configurations of spherical snow grain shape, internal mixing of BC–snow, external mixing of dust–snow, and without TOP as well as the ELM simulation with new model features (ELM_New) can both capture the overall snow distribution reasonably. Additionally, ELM_New overall shows smaller biases in snow cover fraction than ELM_Control in spring when snowmelt is important for water management. The estimated LAP-induced RF in ELM_New ranges from 0 to 19.3 W m -2 with the area-weighted average value of 1.5 W m -2 that is comparable to the reported values in existing studies. The Koch snowflake shape, among other non-spherical shapes, shows the largest difference from the spherical shape in spring when snow processes related to the surface energy budget and water cycle have high importance. The impacts of the mixing state of LAP in snow are smaller than the shape effects and depend on snow grain shape. Compared to external mixing, internal mixing of LAP–snow can lead to larger snow albedo reduction and snowmelt, which further affect the surface energy budget and water cycle. The individual contributions of non-spherical snow shape, mixing state of LAP–snow, and local topography impacts on the snow and surface fluxes have different signs and magnitudes, and their combined effects may be negative or positive due to complex and nonlinear interactions among the factors. Overall, the changes in net solar radiation in spring due to individual and combined effects range from -28.6 to 16.9 W m -2 and -29.7 to 12.2 W m -2 , respectively. This study advances understanding of the role of snow grain shape and mixing state of LAP–snow in land surface processes and offers guidance for improving snow simulations and RF estimates in Earth system models under climate change.

58 GEOSCIENCES↗

Robust late twenty-first century shift in the regional monsoons in RegCM-CORDEX simulations

Abstract We use an unprecedented ensemble of regional climate model (RCM) projections over seven regional CORDEX domains to provide, for the first time, an RCM-based global view of monsoon changes at various levels of increased greenhouse gas (GHG) forcing. All regional simulations are conducted using RegCM4 at a 25 km horizontal grid spacing using lateral and lower boundary forcing from three General Circulation Models (GCMs), which are part of the fifth phase of the Coupled Model Inter-comparison Project (CMIP5). Each simulation covers the period from 1970 through 2100 under two Representative Concentration Pathways (RCP2.6 and RCP8.5). Regional climate simulations exhibit high fidelity in capturing key characteristics of precipitation and atmospheric dynamics across monsoon regions in the historical period. In the future period, regional monsoons exhibit a spatially robust delay in the monsoon onset, an increase in seasonality, and a reduction in the rainy season length at higher levels of radiative forcing. All regions with substantial delays in the monsoon onset exhibit a decrease in pre-monsoon precipitation, indicating a strong connection between pre-monsoon drying and a shift in the monsoon onset. The weakening of latent heat driven atmospheric warming during the pre-monsoon period delays the overturning of atmospheric subsidence in the monsoon regions, which defers their transitioning into deep convective states. Monsoon changes under the RCP2.6 scenario are mostly within the baseline variability.

54 ENVIRONMENTAL SCIENCES↗

Vibronic exciton model for low bandgap donor–acceptor polymers

In this study, a vibronic exciton model is introduced to describe the excited state band structure and associated absorption spectra of low bandgap donor–acceptor conjugated polymers. The Hamiltonian is represented in a diabatic basis consisting of Frenkel-like donor and acceptor fragment excitations as well as charge-transfer (CT) excitations between neighboring fragments. States are coupled to each other through electron and hole transfer as well as Coulombically, through interacting fragment transition dipole moments. Local vibronic coupling involving the prominent aromatic-quinoidal vibrational mode, which is responsible for pronounced vibronic progressions in most conjugated oligomers and polymers, is also included. The DAD repeat unit is shown to behave like a J-aggregate trimer, driven by both the sizable in-phase electron and hole transfer integrals between donor and acceptor fragments as well as negative Coulomb coupling between donor and acceptor fragment excitations. The J-aggregate behavior is enhanced in the polymer limit through inter-repeat unit coupling, with the 0–0 vibronic peak significantly enhanced in the lowest-energy near-IR band. In addition, the radiative rate is enhanced by the number of coherently connected repeat units. The near-IR band is shown to possess roughly equal admixtures of CT and Frenkel-like excitations. Applications are made to the polymer PffBT4T-2DT, with the simulated absorption spectrum quantitatively capturing the salient features of the measured spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards the construction of the Mu2e electromagnetic calorimeter at Fermilab

Mu2e will search for the Charge Lepton Flavor Violating (CLFV) conversion of a muon into an electron in the field of a nucleus. A clean discovery signature is provided by the mono-energetic conversion electron (E e = 104.96 MeV). If no events are observed, Mu2e will set a limit on the ratio between the conversion and the nuclear capture rate below 3 × 10$^{-17}$ (at 90% C.L.). In order to confirm that the observed candidate is an electron, the calorimeter resolution requirements are to provide E res < 10%, T res < 500 ps for 100 MeV electrons while working in vacuum and in a high radiation environment and high magnetic field. The calorimeter is made of two annular aluminum disks, each one filled with 674 pure CsI crystals read out by SiPMs. A sophisticated mechanics and cooling system has been developed to support the crystals and cool the sensors. Radiation hard analog and fast digital electronics have been developed. In this paper the QC tests performed on the produced components and the construction status are reported, as well as the results obtained on the large size prototype with test beam data and at a cosmic ray test stand.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coupling-dependent antiferromagnetic-ferromagnetic ordering in a pinwheel artificial spin ice

Nanopatterned magnetic thin films offer a platform for exploration of tailored magnetic properties such as emergent long-range order. A prominent example is artificial spin ice (ASI), where an arrangement of nanoscale magnetic elements, acting as macrospins, interact via their dipolar fields. In this study, we discuss the transition from antiferromagnetic (AFM) to ferromagnetic (FM) long-range order in a square lattice ASI as the magnetic elements are gradually rotated through 45⁢° to a “pinwheel” configuration. The AFM-FM transition is observed experimentally using synchrotron radiation x-ray spectromicroscopy and occurs for a certain rotation angle of the nanomagnets, dependent on the dipolar coupling strength determined by the separation of the magnets in the lattice. Large-scale magnetic dipole simulations show that the point-dipole approximation fails to capture the correct AFM-FM transition angle. However, excellent agreement with experimental data is obtained using a dumbbell-dipole model, which better reflects the actual dipolar fields of the magnets. This model also explains the coupling dependence of the transition angle, another feature not captured by the point-dipole model. Our findings resolve a discrepancy between measurement and theory in previous work on “pinwheel” ASIs and establish the coupling dependence of the AFM-FM transition. The revised dipole model, with a more accurate representation of the stray field, offers more precise control of magnetic order in artificial spin systems.

Artificial spin ice↗

Mastering Medaka Culture: Improved Techniques for Increasing Egg and Fry Production in Japanese Rice Fish ( Oryzias latipes )

Aquatic systems are integral to ecosystem function and human health. By trapping sediments and retaining nutrients, wetlands protect our water quality. However, a wetland’s capacity to trap sediments and nutrients also means they can capture many contaminants (e.g., heavy metals and radionuclides) released into the environment due to anthropogenic activities. Both heavy metals and radionuclides have detrimental effects on wildlife at acute dosages. However, little is known regarding underlying biological responses associated with chronic low dose exposure to both ionizing radiation and heavy metals. Our long-term research goal is to work to fill this knowledge gap using Medaka (Oryzias latipes), small fish amenable to experimental manipulation. However, the current study focused on altering the husbandry protocol of a laboratory colony of Medaka in a way that would increase colony size to at least 400 individual fish over a six-week period. At the beginning of our work, we followed a strict cleaning, feeding and egg harvesting protocol. Two weeks into our work, we suspected that food limitations may be negatively impacting egg production and noticed fungal growth on eggs. Thus, we altered the feeding regime and egg harvesting protocol. The altered protocol more than tripled egg production and almost doubled of fry production. By the end of our study the colony had 673 individuals: 191 adults and 482 fry. Furthermore, our protocol changes resulted in growth of the colony at sufficient numbers to begin experiments related to investigating sub-lethal impacts of heavy metals and radionuclides on Medaka.

Thompson, Melissa↗

Numerical Analysis of Water Harvesting from Saturated Vapor with the Electrospray Water Droplet Injection in The Solar-Driven Desalination Applications

Solar-driven seawater desalination systems provide freshwater through environmentally friendly and carbon-neutral processes. Air humidification and dehumidification desalination (HDD) systems extract water directly from moist air. This paper focuses on a new solar-driven seawater desalination system that shares some common traits with HDD systems but in which the air is eliminated from the process. Seawater is vaporized by solar thermal radiation in high-performance solar panels. Water vapor flows to a new electro-condensation chamber and passes through a series of electrosprays, which inject small nuclei of freshwater droplets into the vapor clouds. Here, due to dielectrophoresis and electrohydrodynamic flows, the vapor molecules are captured by the charged droplets, and vapor is condensed at the droplet surface. The water vapor condensation was modeled by using the multiphase flow numerical model. The CFD model, which was also experimentally validated, used SprayFoam solver modules available in the Open FOAM® CFD open-source software. In preliminary results, 802 grams/(hr-m2) (grams per hour per unit area) of water was harvested directly from moist air at 24C and 90% relative humidity. The simulation results indicated that freshwater productivity could increase up to 4,000 grams/(hr-m2) for fully saturated air conditions. This represents about 5 times the water productivity rate of current conventional HDD systems today. In addition, energy consumption could be reduced by 80 percent compared to conventional HDD systems.

Electrospray, electro-condensation, solar, droplet↗

Data for Clumping Index Estimation With 30°-tilted Cameras in Row Crops: Evaluation of Methods and Segment Size Effects

The clumping index (CI) quantifies the spatial distribution of foliage elements and is essential for accurately estimating the plant area index (PAI), canopy radiative transfer, and photosynthesis. Traditionally, the finite-length averaging method (LX), the gap size distribution method (CC), and a combined approach of CC and LX (CLX) have been applied to instruments like TRAC and digital hemispherical photography to estimate CI. However, a comprehensive evaluation of these methods in row crops remains limited, especially regarding the influence of segment size on CI. Meanwhile, digital cameras offer a cost-effective and user-friendly solution for canopy measurements in row crops, yet their application in this context remains underexplored. In this study, we employed a new approach using a 30°-tilted digital camera to estimate CI in corn and soybean fields, applying the LX, CC, and CLX methods. We systematically assessed the performance of these three methods by combining field measurements in real-world fields with simulations using the LESS 3D radiative transfer model. Our results showed that CLX applied to the whole image and 45° segment offered accurate estimation of CI (bias within ±0.1, RMSE < 0.2) and PAI (bias within ±0.4, RMSE < 1) in real-world fields and LESS simulations. The accuracy of the LX method was highly sensitive to segment size, with the best performance observed at the 15° segment (PAI bias within ±0.4). In contrast, the CC method remained stable across different segment sizes, and its performance was generally comparable to that of LX, except at the 15° segment. Across view zenith angles, CI derived from CC generally showed a continuous increase, while those from LX and CLX followed a rising trend at small zenith angles but began to decline at 68°, likely due to an increasing proportion of no-gap segments. Seasonally, LX tended to show decreasing CI during early growth stages but increased as the canopy matured, whereas CC and CLX showed gradually increasing CI before plateauing at peak PAI. The 30°-tilted camera effectively captured CI variations across different angles and growth stages, making it a practical and robust instrument for row crop canopy structure analysis. Applying these CI methods to digital cameras offers a low-cost and accessible CI estimation alternative, improving canopy structure monitoring accuracy in row crops.

Modeling↗

Calculations of Astrophysical Reaction Rates Using ENDF/B-VIII.0 Library

Recent observations of neutron stars merger (GW170817) renewed interest in stellar nucleosynthesis. Stellar nucleosynthesis modeling requires fully traceable, unbiased, high fidelity nuclear data. The Evaluated Nuclear Data File (ENDF) libraries contain complete collections of reaction data sets over the nuclear industry standard 10 -5 eV - 20 MeV energy span. For the first time, the (n,γ), (n,fission), (n,p), and (n,α) astrophysical reaction rates were computed within the 0.01-10 GK range of temperatures using the ENDF/B-VIII.0 library, and nuclear Reaction rate Library for astrophysics (REACLIB) fit parameters were deduced. The present results were used to estimate the slow neutron capture timescale. These findings demonstrate the potential astrophysical applications of the ENDF libraries and the complementary relations between the nuclear industry and astrophysics data developments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗