Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum confinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Cutoff-Free Circuit Quantum Electrodynamics

Any quantum-confined electronic system coupled to the electromagnetic continuum is subject to radiative decay and renormalization of its energy levels. When coupled to a cavity, these quantities can be strongly modified with respect to their values in vacuum. Generally, this modification can be accurately captured by including only the closest resonant mode of the cavity. In the circuit quantum electrodynamics architecture, it is, however, found that the radiative decay rates are strongly influenced by far off-resonant modes. A multimode calculation accounting for the infinite set of cavity modes leads to divergences unless a cutoff is imposed. It has so far not been identified what the source of divergence is. We show here that unless gauge invariance is respected, any attempt at the calculation of circuit QED quantities is bound to diverge. We then present a theoretical approach to the calculation of a finite spontaneous emission rate and the Lamb shift that is free of cutoff.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A sub k{sub B}T/q semimetal nanowire field effect transistor

The key challenge for nanoelectronics technologies is to identify the designs that work on molecular length scales, provide reduced power consumption relative to classical field effect transistors (FETs), and that can be readily integrated at low cost. To this end, a FET is introduced that relies on the quantum effects arising for semimetals patterned with critical dimensions below 5 nm, that intrinsically has lower power requirements due to its better than a “Boltzmann tyranny” limited subthreshold swing (SS) relative to classical field effect devices, eliminates the need to form heterojunctions, and mitigates against the requirement for abrupt doping profiles in the formation of nanowire tunnel FETs. This is achieved through using a nanowire comprised of a single semimetal material while providing the equivalent of a heterojunction structure based on shape engineering to avail of the quantum confinement induced semimetal-to-semiconductor transition. Ab initio calculations combined with a non-equilibrium Green's function formalism for charge transport reveals tunneling behavior in the OFF state and a resonant conduction mechanism for the ON state. A common limitation to tunnel FET (TFET) designs is related to a low current in the ON state. A discussion relating to the semimetal FET design to overcome this limitation while providing less than 60 meV/dec SS at room temperature is provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dimensional Effects on the Charge Density Waves in Ultrathin Films of TiSe 2

Charge density wave (CDW) formation in solids is a critical phenomenon involving the collective reorganization of the electrons and atoms in the system into a wave structure, and it is expected to be sensitive to the geometric constraint of the system at the nanoscale. Here, we study the CDW transition in TiSe 2 , a quasi-two-dimensional layered material, to determine the effects of quantum confinement and changing dimensions in films ranging from a single layer to multilayers. Of key interest is the characteristic length scale for the transformation from a two-dimensional case to the three-dimensional limit. Angle-resolved photoemission (ARPES) measurements of films with thicknesses up to six layers reveal substantial variations in the energy structure of discrete quantum well states; however, the temperature-dependent band-gap renormalization converges at just three layers. The results indicate a layer-dependent mixture of two transition temperatures and a very-short-range CDW interaction within a three-dimensional framework.

36 MATERIALS SCIENCE↗

Growing InGaAs quasi-quantum wires inside semi-rhombic shaped planar InP nanowires on exact (001) silicon

We report InGaAs quasi-quantum wires embedded in planar InP nanowires grown on (001) silicon emitting in the 1550 nm communication band. An array of highly ordered InP nanowire with semi-rhombic cross-section was obtained in pre-defined silicon V-grooves through selective-area hetero-epitaxy. The 8% lattice mismatch between InP and Si was accommodated by an ultra-thin stacking disordered InP/GaAs nucleation layer. X-ray diffraction and transmission electron microscope characterizations suggest excellent crystalline quality of the nanowires. By exploiting the morphological evolution of the InP and a self-limiting growth process in the V-grooves, we grew embedded InGaAs quantum-wells and quasi-quantum-wires with tunable shape and position. Room temperature analysis reveals substantially improved photoluminescence in the quasi-quantum wires as compared to the quantum-well reference, due to the reduced intrusion defects and enhanced quantum confinement. These results show great promise for integration of III-V based long wavelength nanowire lasers on the well-established (001) Si platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress-induced piezoelectric field in GaN-based 450-nm light-emitting diodes

We investigated the influence of the built-in piezoelectric field induced by compressive stress on the characteristics of GaN-based 450-nm light-emitting diodes (LEDs) prepared on sapphire substrates of different thicknesses. As the sapphire substrate thickness was reduced, the compressive stress in the GaN layer was released, resulting in wafer bowing. The wafer bowing-induced mechanical stress altered the piezoelectric field, which in turn reduced the quantum confined Stark effect in the InGaN/GaN active region of the LED. The flat-band voltage was estimated by measuring the applied bias voltage that induced a 180° phase shift in the electro-reflectance (ER) spectrum. The piezoelectric field estimated by the ER spectra changed by ∼110 kV/cm. The electroluminescence spectral peak wavelength was blue-shifted, and the internal quantum efficiency was improved by about 22% at a high injection current of 100 mA. The LED on the 60-μm-thick sapphire substrate exhibited the highest light output power of ∼59 mW at an injection current of 100 mA, with the operating voltage unchanged.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The exciton excitations and relaxation processes in low-dimensional semiconductor heterostructures with quantum wells

The processes associated with the transfer of excitonic excitations between tunnel-uncoupled quantum wells (QW) and the influence of the local electric field were investigated in AlGaAs/GaAs heterostructures by the method of photoluminescence excitation (PLE) spectroscopy at low (4.2 K) temperature. The variation in the intensity of photoluminescence (PL) from the wider QW under resonant excitation of excitonic transition in the adjacent narrow QW has been observed. The difference in the PL maximum position and intensity of the wider QW under resonance excitation of the narrow one is explained by the influence of quantum-confined Stark effect on the process of exciton recombination.

36 MATERIALS SCIENCE↗

Effect of total pressure on the formation and size evolution of silicon quantum dots in silicon nitride films

The size of silicon quantum dots (Si QDs) embedded in silicon nitride (SiN{sub x}) has been controlled by varying the total pressure in the plasma-enhanced chemical vapor deposition (PECVD) reactor. This is evidenced by transmission electron microscopy and results in a shift in the light emission peak of the quantum dots. We show that the luminescence in our structures is attributed to the quantum confinement effect. These findings give a strong indication that the quality (density and size distribution) of Si QDs can be improved by optimizing the deposition parameters which opens a route to the fabrication of an all-Si tandem solar cell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanorod length-dependent photodriven H2 production in 1D CdS–Pt heterostructures

Colloidal quantum confined semiconductor-metal heterostructures are promising candidates for solar energy conversion because their light absorbing semiconductor and catalytic components can be independently tuned and optimized. Although the light-to-hydrogen efficiencies of such systems have shown interesting dependences on the morphologies of the semiconductor and metal domains, the mechanisms of such dependences are poorly understood. Here, we use Pt tipped 0D CdS quantum dots (with ∼4.6 nm diameter) and 1D CdS nanorods (of ∼13.8, 27.8, 66.6, and 88.9 nm average rod lengths) as a model system to study the distance-dependence of charge separation and charge recombination times and their impacts on photo-driven H2 production. The H2 generation quantum efficiency increases from 0.2% ± 0.0% in quantum dots to 28.9% ± 0.4% at a rod length of 28 nm and shows negligible changes at longer rod lengths. The half-life time of electron transfer from CdS to Pt increases monotonically with rod length, from 0.7 ± 0.1 in quantum dots to 170.2 ± 29.5 ps in the longest rods, corresponding to a slight decrease in electron transfer quantum efficiency from 92% to 81%. The amplitude-weighted average lifetime of charge recombination of the electron in Pt with the hole in CdS increases from 4.7 ± 0.4 µs in quantum dots to 149 ± 34 µs in 28 nm nanorods, and the lifetime does not increase further in longer rods, resembling the trend in the observed H2 generation quantum efficiency. Our result suggests that the competition of the charge recombination process with the hole removal by the sacrificial electron donor plays a dominant role in the observed nanorod length dependent overall light driven H2 generation quantum efficiency.

Chemistry↗

Controllable synthesis, growth mechanism and optical properties of the ZnSe quantum dots and nanoparticles with different crystalline phases

Graphical abstract: The ZnSe quantum dots (3.5 nm) with the wurtzite structure exhibited a strong near band-edge emission (NBE) peak centered at 422 nm. The zinc blende ZnSe nanoparticles (21 nm) exhibited near-band-edge luminescence peak centered at 472 nm. Highlights: ► The results of TEM showed that the ZnSe quantum dots were about 3.5 nm. ► The ZnSe quantum dots exhibited a near band-edge emission peak centered at 422 nm. ► The ZnSe nanoparticles exhibited near-band-edge luminescence peak centered at 472 nm. - Abstract: ZnSe precursors were prepared by a solvothermal method at 180 °C without any surface-active agents. ZnSe quantum dots and nanoparticles were obtained by annealing the precursors at 300 °C for 2 h in argon atmosphere. The ZnSe quantum dots were about 3.5 nm, while the ZnSe nanoparticles were about 21 nm, as observed using TEM. The growth mechanisms for the two samples were discussed; this proved that the high coordination ability of ethylenediamine to zinc played an important role in the final phase of the products. The ZnSe quantum dots with the wurtzite structure exhibited a strong near band-edge emission (NBE) peak centered at 422 nm, which was blue-shifted in comparison to that of the bulk ZnSe, which was mainly caused by the quantum confinement effect. However, the zinc blende ZnSe nanoparticles exhibited a near-band-edge luminescence peak centered at 472 nm.

36 MATERIALS SCIENCE↗

Breaking electron pairs in the pseudogap regime of SmTiO 3 − SrTiO 3 − SmTiO 3 quantum wells

The strongly correlated two-dimensional electron liquid within SmTiO 3 /SrTiO 3 /SmTiO 3 quantum well structures exhibits a pseudogap phase when the quantum well width is sufficiently narrow. Using low-temperature transport and optical experiments that drive the quantum-well system out of equilibrium, we find evidence of mobile, long-lived, negatively charged quasiparticles, consistent with the idea that the pseudogap phase arises from strongly bound electron pairs. As a result, these experimental results establish a connection between quantum confinement and enhanced electron pairing, which may provide a pathway to higher-temperature superconductors.

Correlated electronics↗

Dependence of the carrier concentration on the current in mid-infrared injection lasers with quantum wells

The current dependences of spontaneous luminescence in mid-IR injection lasers with InGaAsSb/InAlGaAsSb quantum wells are experimentally studied in the subthreshold and lasing modes. The current dependence of the carrier concentration is determined using the current dependence of the total spontaneous luminescence. A lack of carrier concentration saturation with current in the lasing mode was observed. It is shown that this can be due to carrier heating at low quantum-confinement levels and an increase in light absorption by free holes in the waveguide.

36 MATERIALS SCIENCE↗

Effect of Hydrogen Passivation on the Electronic Structure of Ionic Semiconductor Nanostructures

In theoretical studies of thin film and nanostructured semiconductors, pseudohydrogen (PH) is widely used to passivate the surface dangling bonds. Based on these calculations, it is often believed that nanostructured semiconductors, due to quantum confinement, have a larger band gap than their bulk counterparts. Using first-principles band structure theory calculation and comparing systematically the differences between PH-passivated and real-hydrogen-passivated (RH-passivated) semiconductor surfaces and nanocrystals, we show that, unlike PH passivation that always increases the band gap with respect to the bulk value, RH passivation of the nanostructured semiconductors can either increase or decrease the band gap, depending on the ionicity of the nanocompounds. The differences between PH and RH passivations decreases when the covalency of the semiconductor increases and can be explained using a band coupling model. This observation greatly increases the tunability of nanostructured semiconductor properties, especially for wide-gap ionic semiconductors.

08 HYDROGEN↗

Band gap enhancement of glancing angle deposited TiO{sub 2} nanowire array

Vertically oriented TiO{sub 2} nanowire (NW) arrays were fabricated by glancing angle deposition technique. Field emission-scanning electron microscopy shows the formation of two different diameters {approx}80 nm and {approx}40 nm TiO{sub 2} NW for 120 and 460 rpm azimuthal rotation of the substrate. The x-ray diffraction and Raman scattering depicted the presence of rutile and anatase phase TiO{sub 2}. The overall Raman scattering intensity decreased with nanowire diameter. The role of phonon confinement in anatase and rutile peaks has been discussed. The red (7.9 cm{sup -1} of anatase E{sub g}) and blue (7.4 cm{sup -1} of rutile E{sub g}, 7.8 cm{sup -1} of rutile A{sub 1g}) shifts of Raman frequencies were observed. UV-vis absorption measurements show the main band absorption at 3.42 eV, 3.48 eV, and {approx}3.51 eV for thin film and NW prepared at 120 and 460 rpm, respectively. Three fold enhance photon absorption and intense light emission were observed for NW assembly. The photoluminescence emission from the NW assembly revealed blue shift in main band transition due to quantum confinement in NW structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties of α−MnO{sub 2} and Co-doped α−MnO{sub 2} nanowires

α−MnO{sub 2} and Co-doped α−MnO{sub 2} nanowires (NWs) were synthesized by hydrothermal method. The structural characterization by XRD revealed the tetragonal structure of α−MnO{sub 2}. The formation of one dimensional (1D) NWs of pure and Co-doped α−MnO{sub 2} was confirmed from SEM. From UV-Vis absorption spectra, it is found that both pure and Co-doped α−MnO{sub 2} NWs showed blue shift compared to bulk, which revealed the quantum confinement in the synthesized samples. The magnetic properties were analyzed by VSM, which suggest that pure and doped α−MnO{sub 2} exhibit ferromagnetic behavior at room temperature (RT)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three-dimensional nanoscale study of Al segregation and quantum dot formation in GaAs/AlGaAs core-shell nanowires

GaAs/Al-GaAs core-shell nanowires fabricated by molecular beam epitaxy contain quantum confining structures susceptible of producing narrow photoluminescence (PL) and single photons. The nanoscale chemical mapping of these structures is analyzed in 3D by atom probe tomography (APT). The study allows us to confirm that Al atoms tend to segregate within the AlGaAs shells towards the vertices of the hexagons defining the nanowire cross section. We also find strong alloy fluctuations remaining AlGaAs shell, leading occasionally to the formation of quantum dots (QDs). The PL emission energies predicted in the framework of a 3D effective mass model for a QD analyzed by APT and the PL spectra measured on other nanowires from the same growth batch are consistent within the experimental uncertainties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetotransport Spectroscopy of the Interface, Quantum Well, and Hybrid States in Structures with 16-nm-Thick Multiple HgTe Layers

The longitudinal and Hall components of the resistivity tensor are measured in structures with multiple HgTe layers 16 nm thick in magnetic fields to 12 T at temperatures from 1.5 to 300 K. The slope of the magnetic-field dependence of the Hall resistance is found to change its sign at a certain critical temperature T{sub c} = 5 and 10 K in the two studied samples, which indicates the presence of two types of charge carriers and a change in the relation between their contributions to the Hall resistance with temperature. The low critical temperature and manifestation of the “two-component” nature of the Hall curves only at T > T{sub c} prove that the ground state of the system at T = T{sub c} is gapless. At higher temperatures (20 K < T < 200 K), the Hall concentration is proportional to the temperature with good accuracy. The description of the charge-carrier dispersion laws by the 8-band kp model taking into account Γ{sub 8}-band-edge splitting caused by mechanical stresses, which forms both types of state in HgTe, makes it possible to quantitatively describe the observed magnetotransport features. It is shown that they are associated with the simultaneous filling of electron and hole states formed as a result of mixing interface states responsible for the topological-insulator phase and the quantum-confined states in the Γ{sub 8} band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One-Dimensional Electron Gas Confined along Nanowrinkles in a Unidirectional Charge Density Wave Material

Two-dimensional (2D) materials inherently exhibit instabilities. Structurally, this may lead to modulations along the third dimension, e.g., wrinkles. Electronically, 2D instabilities can manifest themselves as charge density waves (CDWs). Although wrinkles can alter anisotropic electronic structures susceptible to forming CDWs, less is known about their impact on broken-symmetry ground states. Here, in this study, using scanning tunneling microscopy and spectroscopy, we investigate the CDW states on the wrinkled surface of DyTe 3 . We identify elongated, parallel nanoscale wrinkles stabilized by ribbon-shaped defects. Interestingly, the CDW order persists across the nanowrinkles with a gradual phase shift but is locally suppressed near the defects, where phase windings occur. In addition, these defects induce quantum confinement effects along the nanowrinkles, indicating the presence of one-dimensional metallic states with hole- like dispersion, while angle-resolved photoemission spectroscopy identifies a gap along the wrinkle direction. We ascribe this discrepancy to strain-induced changes in the Fermi surface, which lead to the closure of the gap at the sites of the nanowrinkles. Taken together, our results underscore the complex interplay between structural features and Fermi surface topology, allowing for the deliberate manipulation of quantum states in strongly correlated systems via local crystal deformations.

nanowrinkles↗

Exciton-Phonon Coupling and Carrier Relaxation in PbS Quantum Dots: The Case of Carboxylate Ligands

Some ligand-nanocrystal combinations exhibit rapid cooling of highly excited electronic states while other nanocrystal/shell combinations do not appear to have this effect. There remains a need to identify the distinguishing properties of ligand-nanocrystal interactions that avoid such rapid relaxation processes to guide the design of colloidal quantum dots (QDs) that take advantage of multiple exciton generation or hot-carrier extraction processes. Here, we use mid-infrared transient absorption spectroscopy to investigate the influence that carboxylate ligands with distinct excited state surface chemistries has on exciton-phonon coupling and hot exciton relaxation in PbS quantum dot (QD) films. Our findings reveal that despite significant differences in the excited state surface chemistry of oleate (OA) and iodide/mercaptopropionic acid (I-/MPA) ligands, PbS QD films passivated with both ligand types exhibit identical electronic relaxation rates and exciton-phonon coupling strengths within experimental precision. The data suggest that the inorganic lattice is the principal source of exciton-phonon coupling that influences hot exciton relaxation, rather than the vibronic modes of carboxylate ligands. The size-dependent nature of the exciton-phonon coupling strength is consistent with the localization of charge on the QD surfaces, which enhances the mixing of electronic and nuclear coordinates particularly when the electronic states are more quantum confined in smaller nanocrystals.

14 SOLAR ENERGY↗