Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUALITY FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Thermal Kinetic Inductance Detectors for Ground-Based Millimeter-Wave Cosmology

We show measurements of thermal kinetic inductance detectors (TKIDs) intended for millimeter-wave cosmology in the 200–300 GHz atmospheric window. The TKID is a type of bolometer which uses the kinetic inductance of a superconducting resonator to measure the temperature of the thermally isolated bolometer island. We measure bolometer thermal conductance, time constant, and noise equivalent power. We also measure the quality factor of our resonators as the bath temperature varies to show they are limited by effects consistent with coupling to two-level systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of lasing on the {sup 4}F{sub 3/2} → {sup 4}I{sub 13/2} secondary transition of Nd{sup 3+} ions in a phase-conjugate Nd{sup 3+} : YAG laser

Lasing at a wavelength of 1.34 µm on the {sup 4}F{sub 3/2} → {sup 4}I{sub 13/2} secondary transition of Nd{sup 3+} ions in a phase-conjugate (PC) Nd{sup 3+} : YAG laser under four-wave mixing in a laser medium is theoretically and experimentally investigated. The influence of the amplified spontaneous emission at a wavelength λ = 1.064 µm on the parameters of phase-conjugate generation of the Nd{sup 3+} : YAG laser at λ = 1.34 µm under passive Q switching by a V{sup 3+} : YAG crystal using two-, three-, and four-loop open cavity schemes is analysed by mathematical simulation. It is shown that there is an optimal initial transmission of a passive Q switch (PQS), the value of which decreases with increasing number of cavity feedback loops. The generation in the Nd{sup 3+} : YAG laser at λ = 1.34 µm with an open PC multiloop cavity is experimentally obtained and studied for the first time. Emission in the form of a train of seven pulses with a total energy of 0.25 J and individual pulse energy and duration of 36 mJ and 150 ns, respectively, is obtained with an initial PQS transmission of 74 %. The angular divergence of the laser beam is found to be 0.7 mrad at quality factors M{sub x}{sup 2}=1.2 and M{sub y}{sup 2}=1.1. (paper)

42 ENGINEERING↗

Detector dose response in megavoltage small photon beams. II. Pencil beam perturbation effects

Purpose: To quantify detector perturbation effects in megavoltage small photon fields and support the theoretical explanation on the nature of quality correction factors in these conditions. Methods: In this second paper, a modern approach to radiation dosimetry is defined for any detector and applied to small photon fields. Fano’s theorem is adapted in the form of a cavity theory and applied in the context of nonstandard beams to express four main effects in the form of perturbation factors. The pencil-beam decomposition method is detailed and adapted to the calculation of perturbation factors and quality correction factors. The approach defines a perturbation function which, for a given field size or beam modulation, entirely determines these dosimetric factors. Monte Carlo calculations are performed in different cavity sizes for different detection materials, electron densities, and extracameral components. Results: Perturbation effects are detailed with calculated perturbation functions, showing the relative magnitude of the effects as well as the geometrical extent to which collimating or modulating the beam impacts the dosimetric factors. The existence of a perturbation zone around the detector cavity is demonstrated and the approach is discussed and linked to previous approaches in the literature to determine critical field sizes. Conclusions: Monte Carlo simulations are valuable to describe pencil beam perturbation effects and detail the nature of dosimetric factors in megavoltage small photon fields. In practice, it is shown that dosimetric factors could be avoided if the field size remains larger than the detector perturbation zone. However, given a detector and beam quality, a full account for the detector geometry is necessary to determine critical field sizes.

07 ISOTOPE AND RADIATION SOURCES↗

Chaotic Excitation and Tidal Damping in the GJ 876 System

The M-dwarf GJ 876 is the closest known star to harbor a multi-planetary system. With three outer planets locked in a chaotic Laplace-type resonance and an appreciably eccentric short-period super-Earth, this system represents a unique exposition of extrasolar planetary dynamics. A key question that concerns the long-term evolution of this system, and the fate of close-in planets in general, is how the significant eccentricity of the inner-most planet is maintained against tidal circularization on timescales comparable to the age of the universe. Here, we employ stochastic secular perturbation theory and N-body simulations to show that the orbit of the inner-most planet is shaped by a delicate balance between extrinsic chaotic forcing and tidal dissipation. As such, the planet’s orbital eccentricity represents an indirect measure of its tidal quality factor. Based on the system’s present-day architecture, we estimate that the extrasolar super-Earth GJ 876 d has a tidal Q ∼ 10{sup 4}–10{sup 5}, a value characteristic of solar system gas giants.

79 ASTRONOMY AND ASTROPHYSICS↗

A full-duplex 40 GHz radio-over-fiber transmission system based on frequency octupling

A 10 Gbps full-duplex 40 GHz radio-over-fiber (RoF) communication system is presented in this paper. A 5 GHz input Radio Frequency signal is octupled to 40 GHz using cascaded parallel Mach–Zehnder modulators (MZMs) operating at lower modulation index (m) range of 2.5–3.5. The ROF transmission system employs symmetrical inline dispersion compensation technique using tDCF and frequency re-use concept for upstream transmission. Full-duplex transmission distance of 180 kms can be achieved with quality factor (Q) ≥ 7 for wide range of modulation index (2.5–3.5) of MZMs, reflecting that system is tolerant to biasing variations. The transmission length can be increased to 210 kms for relatively reduced modulation index range of 3.2–3.5.

42 ENGINEERING↗

Competition between modes with different axial structures in gyrotrons

This study was motivated by some experiments in which it was found that during the voltage rise, instead of expected excitation of a high-frequency parasitic mode, the excitation of a lower-frequency parasitic mode takes place in a certain range of voltages. For explaining this fact, the dependence of start currents of possible competing modes on the beam voltage was carried out in the cold-cavity approximation and by using the self-consistent approach. It was found that in the case of cavities, which consist of the combination of a section of constant radius waveguide and a slightly uptapered waveguide, these two approaches yield completely different results. Thus, experimentally observed excitation of the low-frequency parasitic mode can be explained by the self-consistent modification of the axial profile of the excited field, which has strong influence on the diffractive quality factor of competing modes. This modification is especially pronounced in the case of excitation of modes with many axial variations which can be excited in the region of beam interaction with the backward-wave component of such modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inhibited emission of electromagnetic modes confined in subwavelength cavities

We experimentally demonstrate the active inhibition of subwavelength confined cavity modes emission and quality factor enhancement by controlling the cavity optical surrounding. The intrinsic radiation angular spectrum of modes confined in planar photonics crystal cavities as well as its modifications depending on the environment are inferred via a transfer matrix modeling and k-space imaging.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-photon absorption in quantum dot semiconductor optical amplifiers-based all-optical XOR gate at 2 Tb/s

The nonlinear effect of two-photon absorption (TPA) on the performance of all-optical XOR gate using quantum dot semiconductor optical amplifiers (QDSOAs)-assisted Mach–Zehnder interferometer is numerically analyzed and investigated at a data rate of 2 Tb/s. The dependence of the quality factor (QF) on the critical parameters of the input signal and QDSOA is examined and assessed. The obtained QFs for the all-optical XOR gate using QDSOAs-MZI at 2 Tb/s with TPA and without TPA are 14 and 8, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switchable and tunable film bulk acoustic resonator fabricated using barium strontium titanate active layer and Ta{sub 2}O{sub 5}/SiO{sub 2} acoustic reflector

A solidly mounted acoustic resonator was fabricated using a Ba{sub 0.60}Sr{sub 0.40}TiO{sub 3} (BST) film deposited by metal organic chemical vapor deposition. The device was acoustically isolated from the substrate using a Bragg reflector consisting of three pairs of Ta{sub 2}O{sub 5}/SiO{sub 2} layers deposited by chemical solution deposition. Transmission electron microscopy verified that the Bragg reflector was not affected by the high temperatures and oxidizing conditions necessary to process high quality BST films. Electrical characterization of the resonator demonstrated a quality factor (Q) of 320 and an electromechanical coupling coefficient (K{sub t}{sup 2}) of 7.0% at 11 V.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cooling a quantum circuit via coupling to a multiqubit system

The cooling effects of a quantum LC circuit coupled inductively with an ensemble of artificial qubits are investigated. The particles may decay independently or collectively through their interaction with the environmental vacuum electromagnetic field reservoir. For appropriate bath temperatures and the resonator's quality factors, we demonstrate an effective cooling well below the thermal background. In particular, we found that for larger samples the cooling efficiency is better for independent qubits. However, the cooling process can be faster for collectively interacting particles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low loss Sr{sub 1-x}Ca{sub x}La{sub 4}Ti{sub 5}O{sub 17} microwave dielectric ceramics

Highlights: {yields} New single phase highly dense (95%) microwave dielectric Sr{sub 1-x}Ca{sub x}La{sub 4}Ti{sub 5}O{sub 17} (0 {<=} x {<=} 1) ceramics were designed and processed. {yields} Theoretical density and molar volume decreased due to the substitution of small Ca{sup 2+} for large Sr{sup 2+}. {yields} As required for microwave dielectric applications, optimum properties (i.e. {epsilon}{sub r} {approx} 53.7, Qf{sub o} {approx} 11,532 GHz and {tau}{sub f} {approx} -1.4 ppm/{sup o}C) were achieved for Sr{sub 0.4}Ca{sub 0.6}La{sub 4}Ti{sub 5}O{sub 17} (x = 0.6). -- Abstract: Microwave dielectric ceramics in the Sr{sub 1-x}Ca{sub x}La{sub 4}Ti{sub 5}O{sub 17} (0 {<=} x {<=} 1) composition series were prepared through a solid state mixed oxide route. All the compositions formed single phase ceramics within the detection limit of in-house X-ray diffraction when sintered in the temperature range 1450-1580 {sup o}C. Theoretical density and molar volume decreased due to the substitution of Ca{sup 2+} for Sr{sup 2+} which was associated with a decrease in the dielectric constant ({epsilon}{sub r}) and temperature coefficient of resonant frequency ({tau}{sub f}) but an increase in quality factor, Qf{sub o}. Optimum properties were achieved for Sr{sub 0.4}Ca{sub 0.6}La{sub 4}Ti{sub 5}O{sub 17} which exhibited, {epsilon}{sub r} {approx} 53.7, Qf{sub o} {approx} 11,532 GHz and {tau}{sub f} {approx} -1.4 ppm/{sup o}C.

36 MATERIALS SCIENCE↗

Ferroelectric, dielectric and piezoelectric properties of Sr{sub 0.6}(BiNa){sub 0.2}Bi{sub 2}Nb{sub 2}O{sub 9} ceramics

Graphical abstract: The oxygen vacancy was confirmed by the left figure and the role of oxygen vacancy on the piezoelectric properties was discussed. - Highlights: • The d{sub 33}, ρ and T{sub c} were found to be 22 pC/N, ρ ∼ 10{sup 6} Ω cm and 586 °C. • The electromechanical properties: k{sub p} ∼ 5.0%, k{sub t} ∼ 8.7% and Q{sub m} ∼ 651. • The oxygen vacancy is responsible for electrical properties at high temperature. - Abstract: Aurivillius-type ceramic, Sr{sub 0.6}(BiNa){sub 0.2}Bi{sub 2}Nb{sub 2}O{sub 9} (SBNBN), was synthesized by using conventional solid-state processing. Phase structure and microstructural morphology were confirmed by X-ray diffraction analyses (XRD) and the scanning electron microscopy (SEM). Dielectric, piezoelectric and electromechanical properties of the SBNBN ceramic were investigated in detail. Curie temperature (T{sub c}), piezoelectric coefficient (d{sub 33}), electromechanical coupling coefficient k{sub p}, k{sub t} and quality factor Q{sub m} of the SBNBN ceramic were found to be 586.5 °C, 22 pC/N, 5.0%, 8.7% and 651, respectively. In addition, the reasons for varieties of the resistivity and dielectric properties at high temperature were also discussed.

36 MATERIALS SCIENCE↗

Diffuse phase transition in Li{sub 0.12}Na{sub 0.88}NbO{sub 3} piezoelectric ceramics

The morphotropic phase boundary composition viz. lithium sodium niobate, Li{sub 0.12}Na{sub 0.88}NbO{sub 3}, (LNN-12) was prepared by conventional solid state reaction and sintering route. The temperature dependent permittivity response near transition temperature showed a diffused phase transition (DPT). The degree of diffuseness, {gamma}, using the modified Curie-Weiss law, was found to be 1.92, indicative of almost-complete diffuse phase transition. The planar coupling constant k{sub p}, and mechanical quality factor Q{sub m}, measured by resonance-antiresonance method, were 0.17 and 413 respectively. These parameter values make LNN-12 ceramic an attractive candidate for transducers applications.

36 MATERIALS SCIENCE↗

Room-temperature steady-state optomechanical entanglement on a chip

A potential experimental system, based on high-stress stoichiometric silicon nitride (Si{sub 3}N{sub 4}), is proposed to generate steady-state optomechanical entanglement at room temperature. In the proposed structure, a nanostring interacts dispersively and reactively with a microdisk cavity via the evanescent field. We study the role of both dispersive and reactive couplings in generating optomechanical entanglement, and show that the room-temperature entanglement can be effectively obtained through the dispersive couplings under the reasonable experimental parameters. In particular, in the limits of high temperature (T) and high mechanical quality factor (Q{sub m}), we find that the logarithmic entanglement depends only on the ratio T/Q{sub m}. This indicates that improvements of the material quantity and structure design may lead to more efficient generation of stationary high-temperature entanglement.

36 MATERIALS SCIENCE↗

Review of R&D at DESY on ingot niobium for accelerators

An R&D program at DESY exploring the potential of the production of 1.3 GHz TESLA shape cavities from large grain or ingot niobium material has been carried out as a feasibility study for using ingot niobium material for the European X-ray Free-Electron Laser project. The most important issues like feasibility of the fabrication of niobium discs from ingots, material properties, cavity fabrication, treatment, and finally the cryogenic radiofrequency (RF) performance of the cavity in the accelerator modules are presented and discussed. At least 25% higher intrinsic quality factor comparing to conventional fine-grain niobium and high accelerating gradient of up to 45 MV/m have been demonstrated during the cryogenic RF tests both in the vertical cryostats and in a completely assembled accelerating cryo-module.

43 PARTICLE ACCELERATORS↗

Lasing modes in polycrystalline and amorphous photonic structures

We systematically studied the lasing characteristics in photonic polycrystalline and amorphous structures. 2D arrays of air holes were fabricated in a GaAs membrane. InAs quantum dots embedded in the membrane provide gain for lasing under optical pumping. The lasing modes are spatially localized, and blue shift as the structural order becomes short ranged. Our three-dimensional numerical simulations reveal that the out-of-plane leakage of the lasing mode dominates over the in-plane leakage. The lasing modes in a photonic polycrystalline move away from the center frequency of the photonic band gap to reduce the out-of-plane leakage. In a photonic amorphous structure, the short-range order improves optical confinement and enhances the quality factor of resonances. Understanding the behavior of photonic polycrystalline laser and amorphous laser opens the possibility of controlling lasing characteristic by varying the degree of structural order.

36 MATERIALS SCIENCE↗

Thermo-acoustic engineering of silicon microresonators via evanescent waves

A temperature-compensated silicon micromechanical resonator with a quadratic temperature characteristic is realized by acoustic engineering. Energy-trapped resonance modes are synthesized by acoustic coupling of propagating and evanescent extensional waves in waveguides with rectangular cross section. Highly different temperature sensitivity of propagating and evanescent waves is used to engineer the linear temperature coefficient of frequency. The resulted quadratic temperature characteristic has a well-defined turn-over temperature that can be tailored by relative energy distribution between propagating and evanescent acoustic fields. A 76 MHz prototype is implemented in single crystal silicon. Two high quality factor and closely spaced resonance modes, created from efficient energy trapping of extensional waves, are excited through thin aluminum nitride film. Having different evanescent wave constituents and energy distribution across the device, these modes show different turn over points of 67 °C and 87 °C for their quadratic temperature characteristic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray spectral state evolution in IGR J17091–3624 and comparison of its heartbeat oscillation properties with those of GRS 1915+105

In this work, we study the X-ray timing and spectral evolution of the transient low-mass X-ray binary IGR J17091–3624 during the first 66 days of its 2011 outburst. We present results obtained from observations with two instruments, the Rossi X-ray Timing Explorer Proportional Counter Array and SWIFT X-Ray Telescope, between 2011 February 9 and 2011 April 15. Using quasi-periodic oscillation classifications, power density spectrum characteristics, time-lag behavior, and energy spectral properties, we determine source states and their transitions at different times of the outburst. During the first part of the evolution, the source followed trends that are usually observed from transient black hole X-ray binaries (BHXBs). Interestingly, a gradual transition is observed in IGR J17091–3624 from the low-variability soft intermediate state, commonly seen in BHXBs, to a high-variability state with regular, repetitive, and structured pulsations, seen only from GRS 1915+105 (also known as 'ρ' class variability/'heartbeat' oscillations). We study the time evolution of the characteristic timescale, quality factor, and rms amplitude of heartbeat oscillations in IGR J17091–3624. We also present a detailed comparison of the timing and spectral properties of heartbeat oscillations and their evolution in IGR J17091–3624 and GRS 1915+105.

79 ASTRONOMY AND ASTROPHYSICS↗