Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Programming Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Joint Fleet Sizing and Charging System Planning for Autonomous Electric Vehicles

This paper studies the joint fleet sizing and charging system planning problem for a company operating a fleet of autonomous electric vehicles (AEVs) for passenger and goods transportation. Most of the relevant published papers focus on intracity scenarios and adopt heuristic approaches, e.g., agent based simulation, which do not guarantee optimality. In contrast, we propose a mixed integer linear programming model for intercity scenarios. This model incorporates comprehensive considerations of 1) limited AEV driving range; 2) optimal AEV routing and relocating operations; 3) time-varying origin-destination transport demands; and 4) differentiated operation cost structure of passenger and goods transportation. The proposed model can be computational expensive when the scale of the transportation network is large. We then exploit the structure of this program to expedite its solution. Numerical experiments are conducted to validate the proposed method. Our experimental results show that AEVs in passenger and goods transportation have remarkable planning and operation differences. We also demonstrate that intelligent routing and relocating operations, charging system and vehicle parameters, e.g., charging power, battery capacity, driving speed etc., can significantly affect the economic efficiency and the planning results of an AEV fleet.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2019

Water Resources Utilization and Protection in the Coal Mining Area of Northern China

This study investigates multiple types of water resources in the western mining area in China, their supply-demand balance by using the same dimension gray recurrence dynamic model GM (1, 1), and water content coefficients of mines to ease water supply-demand contradiction. A multi-objective programming model is proposed for optimal water resources allocation management. Optimal technical schemes for water resources allocation among different users are obtained. The optimization model improves upon the previous studies by using water demand and water supply forecast. Coordinated development for mining safety, mine water utilization, and remediation and control of water environment is achieved.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

A Hartree-Fock Application Using UPC++ and the New DArray Library

The Hartree-Fock (HF) method is the fundamental first step for incorporating quantum mechanics into many-electron simulations of atoms and molecules, and it is an important component of computational chemistry toolkits like NWChem. The GTFock code is an HF implementation that, while it does not have all the features in NWChem, represents crucial algorithmic advances that reduce communication and improve load balance by doing an up-front static partitioning of tasks, followed by work stealing whenever necessary. To enable innovations in algorithms and exploit next generation exascale systems, it is crucial to support quantum chemistry codes using expressive and convenient programming models and runtime systems that are also efficient and scalable. Here, this paper presents an HF implementation similar to GTFock using UPC++, a partitioned global address space model that includes flexible communication, asynchronous remote computation, and a powerful multidimensional array library. UPC++ offers runtime features that are useful for HF such as active messages, a rich calculus for array operations, hardware-supported fetch-and-add, and functions for ensuring asynchronous runtime progress. We present a new distributed array abstraction, DArray, that is convenient for the kinds of random-access array updates and linear algebra operations on block-distributed arrays with irregular data ownership. Finally, we analyze the performance of atomic fetch-and-add operations (relevant for load balancing) and runtime attentiveness, then compare various techniques and optimizations for each. Our optimized implementation of HF using UPC++ and the DArrays library shows up to 20% improvement over GTFock with Global Arrays at scales up to 24,000 cores.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Transforming Science Through Software: Improving While Delivering 100×

The U.S. Department of Energy (DOE) Exascale Computing Project (ECP) funded the development of new (and the transformation of important existing) applications, libraries, and tools that realized improvement in performance and capabilities of often 100 times or more on emerging exascale computers. This exceptional gain inspired the title of this special issue: Transforming Science through Software: Improving while delivering 100X. The term 100X refers to advancing capabilities in modeling, simulation, and analysis by a factor of 100 or more using some combination of new algorithms, optimization techniques, software libraries, and programming models, coupled with the next generation of hardware for high-performance computing (HPC). The papers in this issue share experiences with the practice and science of scientific software development, with an emphasis on developing a coherent, portable, and sustainable HPC software ecosystem for next-generation computational science. Finally, we hope to foster expanded community efforts related to the fundamental role of sustainable scientific software ecosystems in advancing the computing sciences.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Application Experiences on a GPU-Accelerated Arm-based HPC Testbed

This paper assesses and reports the experience of ten teams working to port, validate, and benchmark several High Performance Computing applications on a novel GPU-accelerated Arm testbed system. The testbed consists of eight NVIDIA Arm HPC Developer Kit systems, each one equipped with a server-class Arm CPU from Ampere Computing and two data center GPUs from NVIDIA Corp. The systems are connected together using InfiniBand interconnect. The selected applications and mini-apps are written using several programming languages and use multiple accelerator-based programming models for GPUs such as CUDA, OpenACC, and OpenMP offloading. Working on application porting requires a robust and easy-to-access programming environment, including a variety of compilers and optimized scientific libraries. The goal of this work is to evaluate platform readiness and assess the effort required from developers to deploy well-established scientific workloads on current and future generation Arm-based GPU-accelerated HPC systems. The reported case studies demonstrate that the current level of maturity and diversity of software and tools is already adequate for large-scale production deployments.

Elwasif, Wael↗
DOE OSTI2019

Documented Kokkos API: WBS STPR 04 Milestone 13

This report documents the completion of milestone STPRO4-13 "Documented Kokkos API", which is part of the Exascale Computing Project (ECP). The goal of this Milestone was to generate documentation for the Kokkos programming model accessible to the open HPC community, beyond what was available via the tutorials. The total documentation for Kokkos now contains the equivalent of about 250 pages in text book format. About a third of it is contained in a more text book like style like the Kokkos Programming Guide, while most of the rest is an API reference modelled after popular C++ reference webpages. On the order of 175 pages was generated new as part of the work for this milestone.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A Trilevel Model for Segmentation of the Power Transmission Grid Cyber Network

Network segmentation of a power grid's communication system can make the grid more resilient to cyberattacks. Here we develop a novel trilevel programming model to optimally segment a grid communication system, taking into account the actions of an information technology (IT) administrator, attacker, and grid operator. The IT administrator is allowed to segment existing networks, and the attacker is given a budget to inflict damage on the grid by attacking the segmented communication system. Finally, the grid operator can redispatch the grid after the attack to minimize damage. The resulting problem is a trilevel interdiction problem that we solve using a branch and bound algorithm for bilevel problems. We demonstrate the benefits of optimal network segmentation through case studies on the 9-bus Western System Coordinating Council (WSCC) system and the 30-bus IEEE system. These examples illustrate that network segmentation can significantly reduce the threat posed by a cyberattacker.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

SharP: Towards Programming Extreme-Scale Systems with Hierarchical Heterogeneous Memory

The pre-exascale systems are expected to have a significant amount of hierarchical and heterogeneous on-node memory, and this trend of system architecture in extreme-scale systems is expected to continue into the exascale era. Along with hierarchical-heterogeneous memory, the system typically has a high-performing network and a compute accelerator. This system architecture is not only effective for running traditional High Performance Computing (HPC) applications (Big-Compute), but also running data-intensive HPC applications and Big-Data applications. As a consequence, there is a growing desire to have a single system serve the needs of both Big-Compute and Big-Data applications. Though the system architecture supports the convergence of the Big-Compute and Big-Data, the programming models have yet to evolve to support either hierarchical-heterogeneous memory systems or the convergence. In this work, we propose and develop the programming abstraction called SHARed data-structure centric Programming abstraction (SharP) to address both of these goals, i.e., provide (1) a simple, usable, and portable abstraction for hierarchical-heterogeneous memory and (2) a unified programming abstraction for Big-Compute and Big-Data applications. To evaluate SharP, we implement a Stencil benchmark using SharP, port QMCPack, a petascale-capable application, and adapt Memcached ecosystem, a popular Big-Data framework, to use SharP, and quantify the performance and productivity advantages. Additionally, we demonstrate the simplicity of using SharP on different memories including DRAM, High-bandwidth Memory (HBM), and non-volatile random access memory (NVRAM).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Sequential Service Restoration for Unbalanced Distribution Systems and Microgrids

The resilience and reliability of modern power systems are threatened by increasingly severe weather events and cyber-physical security events. An effective restoration methodology is desired to optimally integrate emerging smart grid technologies and pave the way for developing self-healing smart grids. In this paper, a sequential service restoration (SSR) framework is proposed to generate restoration solutions for distribution systems and microgrids in the event of large-scale power outages. The restoration solution contains a sequence of control actions that properly coordinate switches, distributed generators, and switchable loads to form multiple isolated microgrids. The SSR can be applied for three-phase unbalanced distribution systems and microgrids and can adapt to various operation conditions. Mathematical models are introduced for three-phase unbalanced power flow, voltage regulators, transformers, and loads. Furthermore, the SSR problem is formulated as a mixed-integer linear programming model, and its effectiveness is evaluated via the modified IEEE 123 node test feeder.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Application priority of GSHP systems in the climate conditions of the United States

Building energy-performance simulation programs are powerful tools for many aspects of feasibility studies regarding ground source heat pump (GSHP). However, the understanding of the limitations of the energy modelling programs, their capability of predicting energy performance early in the design process, and the complicated functionality of these programs makes the software programs harder to use and less practical. The interactive tool developed in this study seeks to provide analysis information in a straightforward manner that is inexpensive, convenient, and sophisticated. This tool uses an inclusive approach to assess the feasibility of GSHPs by prescreening critical factors such as climate conditions, ground temperatures, energy use, and cost savings. It is interactive and enables the user to do a feasibility analysis with a weighting factor for each feasibility criterion based on the user’s preference and interests. The application of the tool explains feasibility scores of 15 representative cities in various climatic conditions across the US. Results for commercial buildings show that the GSHP systems are more feasible in cold and dry, cool and humid, and very cold areas than warm and dry, very hot and humid, and mixed marine areas, and that most feasibility levels are located on good and moderate.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2015

Diagnosing the Causes and Severity of One-sided Message Contention

Two trends suggest network contention for one-sided messages is poised to become a performance problem that concerns application developers: an increased interest in one-sided programming models and a rising ratio of hardware threads to network injection bandwidth. Unfortunately, it is difficult to reason about network contention and one-sided messages because one-sided tasks can either decrease or increase contention. We present effective and portable techniques for diagnosing the causes and severity of one-sided message contention. To detect that a message is affected by contention, we maintain statistics representing instantaneous (non-local) network resource demand. Using lightweight measurement and modeling, we identify the portion of a message's latency that is due to contention and whether contention occurs at the initiator or target. We attribute these metrics to program statements in their full static and dynamic context. We characterize contention for an important computational chemistry benchmark on InfiniBand, Cray Aries, and IBM Blue Gene/Q interconnects. We pinpoint the sources of contention, estimate their severity, and show that when message delivery time deviates from an ideal model, there are other messages contending for the same network links. With a small change to the benchmark, we reduce contention up to 50% and improve total runtime as much as 20%.

Network Contention, Performance Analysis, Dynamic ↗
DOE OSTI2023

Bringing Low- and Moderate-Income Solar Financing Models to Scale (Final Technical Report (FTR))

In this final report, the Clean Energy States Alliance(CESA) and its project partners describe their work to accelerate the development of solar projects for three distinct subsets of the low- to moderate-income(LMI) solar market: single-family homes, manufactured homes, and community institutions, including multifamily affordable housing. For each market sector, the project team undertook research, outreach, and market-building activities. By advancing promising LMI solar financing innovations for different housing types and spreading them to new locations, the Scaling Up Solar for Under-Resourced Communities project has built momentum to scale up LMI solar. Although the report describes some research pertaining to solar adoption in LMI communities, this project was original in that it focused on two specific models to tackle single-family homes and community institutions. Until this project, very little research dedicated to solar for manufactured homes existed. For each market sector, the project team undertook research, outreach, and market-building activities. For the single-family homes sector, the project encouraged states to adapt a program model based on a successful Connecticut initiative that has brought solar to thousands of LMI homeowners. For manufactured homes, the project analyzed the potential for using solar for that housing sector and worked with states, utilities, and other stakeholders to launch pilot projects or programs. For community institutions, the project team worked with foundations, lenders, and community service organizations to inventory, analyze, and communicate models for philanthropic investment that accelerate the deployment of solar and solar+storage in multifamily affordable housing, health centers, and other LMI-serving community institutions.

14 SOLAR ENERGY↗
DOE OSTI2017

Integrating biomass quality variability in stochastic supply chain modeling and optimization for large-scale biofuel production

The production of biofuels using second-generation feedstocks has been recognized as an important alternative source of sustainable energy and its demand is expected to increase due to regulations such as the Renewable Fuel Standard. However, the pathway to biofuel industry maturity faces unique, unaddressed challenges. Here, to address this challenges, this article presents an optimization model which quantifies and controls the impact of biomass quality variability on supply chain related decisions and technology selection. We propose a two-stage stochastic programming model and associated efficient solution procedures for solving large-scale problems to (1) better represent the random nature of the biomass quality (defined by moisture and ash contents) in supply chain modeling, and (2) assess the impact of these uncertainties on the supply chain design and planning. The proposed model is then applied to a case study in the state of Tennessee. Results show that high moisture and ash contents negatively impact the unit delivery cost since poor biomass quality requires the addition of quality control activities. Experimental results indicate that supply chain cost could increase as much as 27%–31% when biomass quality is poor. We assess the impact of the biomass quality on the topological supply chain. Our case study indicates that biomass quality impacts supply chain costs; thus, it is important to consider the impact of biomass quality in supply chain design and management decisions.

09 BIOMASS FUELS↗
DOE OSTI2023

JSPEC: A Program for IBS and Electron Cooling Simulation

JSPEC (JLab Simulation Package on Electron Cooling) is an open-source C++ program developed at Jefferson Lab to simulate the evolution of the ion beam under the intrabeam scattering effect and/or the electron cooling effect. JSPEC includes various models of the ion beam, the electron beam, and the friction force, aiming to reflect the latest advances in the field and to provide a useful tool to the community. JSPEC has been benchmarked against other cooling simulation codes and experimental data. It has been used to support the cooler design for JLEIC, an earlier JLab design for the Electron-Ion Collider. A Python wrapper of the C++ code, pyJSPEC, for Python 3.x environment has also been developed and released. It allows users to run JSPEC simulations in a Python environment and makes it possible for JSPEC to collaborate with other accelerator and beam modeling programs, as well as plentiful Python tools in data visualization, optimization, machine learning, etc. In this report, we introduce the features of JSPEC, with a focus on the latest development, and demonstrate how to use JSPEC and pyJSPEC with sample codes and numerical examples.

Accelerator Physics↗
DOE OSTI2016

Final Report on XStack: Software Synthesis for High Productivity ExaScale Computing

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2011

Going Beyond Code: A Guide for Creating Effective Green Building Programs for Energy Efficient and Sustainable Communities

This guide is designed to help state and local governments design and implement successful "beyond code" programs for new commercial and residential buildings. The goal is to help states and localities establish voluntary or mandatory programs that go well beyond traditional minimum code requirements for new buildings. The guide addresses keys to successful adoption and implementation and discusses the primary areas that are typically included in beyond code or green building programs, including energy-efficiency materials and resource conservation, water efficiency, indoor environmental quality, and site development and land use. Detailed descriptions and analysis of actual programs are discussed, including lessons learned and best practices. States and localities can use the information on local programs, model codes and standards, and the model energy-efficiency criteria for residential and commercial buildings to find the best approach for their jurisdiction to develop and implement an effective beyond code program.

Code adoption and implementation, sustainability, ↗
DOE OSTI2021

Data-driven optimization of mixed-integer bi-level multi-follower integrated planning and scheduling problems under demand uncertainty

The coordination of interconnected elements across the different layers of the supply chain is essential for all industrial processes and the key to optimal decision-making. Yet, the modeling and optimization of such interdependent systems are still burdensome. Here we address the simultaneous modeling and optimization of medium-term planning and short-term scheduling problems under demand uncertainty using mixed-integer bi-level multi-follower programming and data-driven optimization. Bi-level multi-follower programs model the natural hierarchy between different layers of supply chain management holistically, while scenario analysis and data-driven optimization allow us to retrieve the guaranteed feasible solutions of the integrated formulation under various demand considerations. We address the data-driven optimization of this challenging class of problems using the DOMINO framework, which was initially developed to solve single-leader single-follower bi-level optimization problems to guaranteed feasibility. This framework is extended to solve single-leader multi-follower stochastic formulations and its performance is characterized by well-known single and multi-product process scheduling case studies. Through our data-driven algorithmic approach, we present guaranteed feasible solutions to linear and nonlinear mixed-integer bi-level formulations of simultaneous planning and scheduling problems and further characterize the effects of the scheduling level complexity on the solution performance, which spans over several hundred continuous and binary variables, and thousands of constraints.

42 ENGINEERING↗
DOE OSTI2024

Evaluating Nationwide Supply Chain for Circularity of PET and Olefin Plastics

PET (Polyethylene Terephthalate, #1) and olefin plastics including HDPE (High Density Polyethylene, #2), LDPE/LLDPE (Low Density/Linear Low-Density Polyethylene, #4) and PP (Polypropylene, #5) together comprise nearly 80% of the U.S. plastic market. Due to their high market share and extensive application in packaging these polymers have better potential for circularity than other polymer types. To understand the potential of future scenarios with higher recycling rates, supply chain scenarios for PET and olefin plastic packaging need to be analyzed with increased availability and collection of plastics. Currently there exists a knowledge gap to understand the circular supply chain on a national level. Performing a nationwide analysis introduces certain challenges such as variability in the plastic mix of the recycling stream in different municipalities, lack of collection of some types of plastics, regional differences in cost and estimating a national supply curve based on state level access rate and participation rate. Currently, a limited number of Plastic Reclaimers recycle the nation’s collected plastic involving transportation over long distances surpassing state boundaries. Modeling a nationwide scenario instead of regional/state based scenario will facilitate transportation beyond state boundaries for the development of a circular economy. A Mixed-integer Linear Programming model was developed, to identify the optimal location and capacity of the Material Recovery Facilities (MRFs) nationwide subject to maximizing the profit margin of the industrial entities within the model. We considered three different scenarios including the base case scenario (S1) collecting 2.27 million metric tons/year as well as two additional scenarios with available plastic supply of 1.8 times (S2) and 2.2 times (S3) of the base case scenario. The model identified 166, 275 and 319 counties as potential MRF locations for scenarios S1, S2 and S3 respectively. Compared to the existing number of counties having MRFs in the US, the model results indicated a reduction of 38% of MRFs for S1. For S2 and S3, the number of counties with MRFs increased 3% and 20% respectively compared to counties currently with MRFs. The average profit remains constant between $180-$181/ton regardless of the increased plastic collection.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗