Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photon absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Bound Exciton Complexes in Near-Infrared Emitting Quantum Shells

Near-infrared (NIR) light sources based on colloidal semiconductor nanocrystals (NCs) represent a scalable, low-cost alternative to epitaxial semiconductor platforms. However, their performance remains hindered by rapid Auger recombination, a problem that is particularly pronounced in narrow-bandgap materials. Here, we report on CdS/HgS/CdS and CdS/HgCdSe/ ZnS quantum shells (QSs), a class of spherical quantum wells specifically engineered for a suppression of nonradiative Auger processes. Fabricated QSs exhibit tunable NIR emission with photoluminescence quantum yields reaching ∼60% below 1000 nm and up to 30% near 1300 nm. Optical gain and stimulated emission were observed in CdS/HgS/CdS QSs. In contrast, CdS/HgCdSe/ZnS QSs displayed a photoinduced absorption in lieu of optical gain despite demonstrating a comparatively stronger Auger suppression. Transient absorption spectroscopy revealed that this phenomenon arises from the formation of bound multiexciton complexes that induce long-lived sub-bandgap multiexciton states. The observation of such bound excitonic clusters at room temperature offers a pathway toward nonlinear NIR photonic phenomena, including biexciton−exciton cascade emission, optical modulation, and singleexciton gain.

Auger recombination↗
DOE OSTI2022

Comparative analysis of energy deposition modes available in Serpent 2 within the framework of the supercritical water reactor - Fuel qualification test reactor physics benchmark

A joint European Canadian Chinese development of a supercritical water-cooled small modular reactor (SCW-SMR) technology is in progress since September 2020 in the framework of a Horizon 2020 project called ECC-SMART. As a main purpose of the project, proper estimates of energy deposition and its spatial distribution are prerequisites for the accurate analysis of safety related parameters of the SCW-SMR concept under development. A supercritical water reactor fuel computational benchmark model, provided by Canadian Nuclear Laboratories, was applied for detailed comparison of different energy deposition calculation options available in the Serpent 2 Monte Carlo code. The effect of energy deposition options on the normalization of the results as well as on the spatial distribution of the energy deposition are discussed. Consistent energy deposition calculation methods are presented between three Monte Carlo codes, viz., Serpent 2, MCNP6 and OpenMC. Although resource-intensive, the use of the coupled neutron-photon transport mode of Serpent 2 is recommended for accurate spatial and quantitative characterization of energy deposition in the SCW-SMR fuel assemblies, accounting for both neutron and photon heating of all the materials. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Addressing the impact of Lyman opacity in inference of divertor plasma conditions with 2D spectroscopic camera analysis of Balmer emission during detachment in JET L-mode plasmas

The impact of re-absorption of the deuterium Lyman series emission was addressed in inferring divertor plasma conditions from Balmer series emission with 2D spectroscopic camera analysis during detachment in JET L-mode plasmas. The previously presented methodology was amended by modifying the standard photon emission coefficients and ionization and recombination rate coefficients of the ADAS database to consider the re-population of excited states due to Lyman opacity. This resulted in the estimate for the atomic density near the outer strike point to decrease by up to 75% at the onset of detachment at strike point temperatures of T e,osp ≈ 1.0–3.0 eV with respect to the strongly overestimated previously obtained values, whereas the estimated electron temperature and density were unaffected by the opacity correction within the scatter of the data and only a moderate reduction by up to 20% was observed in the estimate for the molecularly induced fraction of the Balmer emission. No noticeable change was seen in the ionization rate, calculated from the estimated outer strike point conditions, due to the decrease in the atomic density estimate compensating for the increased values of the opacity-corrected ADAS rate coefficients for ionization. In detached conditions at T e,osp ≈ 0.5–1.0 eV, 25%–35% lower recombination rates were provided by the opacity-corrected model. The observed effects on the experimental analysis were supported by a corresponding synthetic analysis based on EDGE2D-EIRENE simulations.

Balmer emission↗
DOE OSTI2023

Wavelength-Dependent Spin Excitation with Circularly Polarized Light in CdSe Nanoplatelets

Zinc-blende (ZB) cadmium selenide (CdSe) nanoplatelets (NPLs) have drawn increasing attention as an ideal condensed-phase material for facilitating photon-to-spin transduction in quantum networks. Yet, a systematic investigation of their fidelity in converting circularly polarized light (CPL) to exciton spin polarization as a function of excitation wavelength is lacking. Here, this work demonstrates using time-resolved transient absorption (TA) spectroscopy combined with density functional theory calculations that ZB CdSe NPLs exhibit wavelength-dependent CPL-induced spin polarization. The capacity of CPL to inject spin polarization is maximized for resonant excitation of band-edge valence-to-conduction band (VB/CB) transitions, and the degree to which CPL induces spin polarization can be modified for non-resonant excitation wavelengths as excitation occurs at k-points away from the Γ point from VB states with varying degrees of mixed heavy-hole (HH) and light-hole (LH) characters. Furthermore, it is highlighted that spin polarization within the LH exciton (LX) population created from resonant LH/CB excitation is retained upon LX → HH exciton (HX) relaxation due to the slow electron spin-flip rate (~1.1 ps) compared to the LH → HH inter-band relaxation rate (~200 fs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Transient resonant Auger–Meitner spectra of photoexcited thymine

In this paper, we present the first investigation of excited state dynamics by resonant Auger–Meitner spectroscopy (also known as resonant Auger spectroscopy) using the nucleobase thymine as an example. Thymine is photoexcited in the UV and probed with X-ray photon energies at and below the oxygen K-edge. After initial photoexcitation to a ππ* excited state, thymine is known to undergo internal conversion to an nπ* excited state with a strong resonance at the oxygen K-edge, red-shifted from the ground state π* resonances of thymine. We resolve and compare the Auger–Meitner electron spectra associated both with the excited state and ground state resonances, and distinguish participator and spectator decay contributions. Furthermore, we observe simultaneously with the decay of the nπ* state signatures the appearance of additional resonant Auger–Meitner contributions at photon energies between the nπ* state and the ground state resonances. We assign these contributions to population transfer from the nπ* state to a ππ* triplet state via intersystem crossing on the picosecond timescale based on simulations of the X-ray absorption spectra in the vibrationally hot triplet state. Moreover, we identify signatures from the initially excited ππ* singlet state which we have not observed in our previous study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Single-pulse (100 ps) extended x-ray absorption fine structure capability at the Dynamic Compression Sector

Determining real-time changes in the local atomistic order is important for a mechanistic understanding of shock wave induced structural and chemical changes. However, the single event and short duration (nanosecond times) nature of shock experiments pose challenges in obtaining Extended X-ray Absorption Fine Structure (EXAFS) measurements - typically used for monitoring local order changes. Here, we report on a new single pulse (~100 ps duration) transmission geometry EXAFS capability for use in laser shock-compression experiments at the Dynamic Compression Sector (DCS), Advanced Photon Source. We used a flat plate of highly oriented pyrolytic graphite (HOPG) as the spectrometer element to energy disperse x-rays transmitted through the sample. It provided high efficiency with approximately 15% of the x-rays incident on the HOPG reaching an x-ray area detector with high quantum efficiency. This combination resulted in good signal-to-noise ratio (~10 3 ), energy resolution of ~10 eV at 10 keV, EXAFS spectra covering 100s of eV, and good pulse to pulse reproducibility of our single pulse measurements. Ambient EXAFS spectra for Cu and Au are compared to reference spectra, validating our measurement system. Comparison of single pulse EXAFS results for ambient and laser shocked Ge(100) shows large changes to the local structure of the short lived state of shocked Ge. The current DCS EXAFS capability can be used to perform single pulse measurements in laser shocked materials from approximately 9-13 keV. These EXAFS developments will be available to all users of the DCS.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

IER-484 CED3b Report: AFRRI ER1 Dosimetry Characterization

This report presents the preliminary work for IER 484, the characterization of the leakage radia tion field from the TRIGA reactor at the Armed Forces Radiobiology Research Institute (AFRRI). The purpose of the dose characterization is to establish the reference dose needed to execute a NAD inter-comparison exercise. During the week of August 20th, a team from Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratory (SNL), and Institut de Radioprotection et de Sûreté Nucléaire (IRSN) performed various measurements in AFRRI’s TRIGA ER1 (Exposure Room 1) with Passive Neutron Spectrometer (PNS) spheres and nuclear accident dosimeters (NADs) mounted on Bottle Manikin Absorption (BOMAB) phantoms (to simulate doses received by people) and additional NADs mounted on aluminum plates (to simulate doses in free air). Without Atomic Weapons Establishment (AWE), LLNL became responsible for measuring the neutron spectrum using PNS spheres. SNL is responsible for providing photon dose data. LLNL, SNL, and IRSN each deployed their own NADs, which will be compared to the reference dose measured. Final characterization of the dose field based on analyzed data will be presented in the CED4a report.

42 ENGINEERING↗
DOE OSTI2022

Structural Phase Transitions between Layered Indium Selenide for Integrated Photonic Memory

The primary mechanism of optical memoristive devices relies on phase transitions between amorphous and crystalline states. The slow or energy-hungry amorphous–crystalline transitions in optical phase-change materials are detrimental to the scalability and performance of devices. Leveraging an integrated photonic platform, nonvolatile and reversible switching between two layered structures of indium selenide (In 2 Se 3 ) triggered by a single nanosecond pulse is demonstrated. The high-resolution pair distribution function reveals the detailed atomistic transition pathways between the layered structures. With interlayer “shear glide” and isosymmetric phase transition, switching between the α- and β-structural states contains low re-configurational entropy, allowing reversible switching between layered structures. Broadband refractive index contrast, optical transparency, and volumetric effect in the crystalline–crystalline phase transition are experimentally characterized in molecular-beam-epitaxy-grown thin films and compared to ab initio calculations. Finally, the nonlinear resonator transmission spectra measure of incremental linear loss rate of 3.3 GHz, introduced by a 1.5 µm-long In 2 Se 3 -covered layer, resulted from the combinations of material absorption and scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Satellites, core hole excitations, and spin-resolved electronic structure in the spectroscopy of half-metallic CrO 2

Photoelectron satellites—the structures appearing on the low kinetic or high binding-energy side of the “main” or “elastic” photopeak—betray the complex many-body interactions set in motion by the sudden creation of the core hole. In this work, we demonstrate, using the technologically important ferromagnetic half-metal CrO 2 , how such satellites can manifest themselves in other core-level spectroscopies of the material and how they can reveal important details pertinent to its electronic structure. Specifically, we identify a fluorescence satellite in the Cr 𝐿 3 resonant x-ray-emission spectra that radiates at a constant emission energy across the Cr 𝐿 3 x-ray edge with energy ≈1.3 eV above the ordinary valence fluorescence. Here, we provide evidence that this feature arises from the valence recombination of the Cr 2⁢𝑝 core hole “dressed” by the same shakeup charge-transfer process present in both the Cr x-ray photoelectron and the Cr x-ray absorption spectra with its energy uniquely measuring the exchange splitting of the Cr 3⁢𝑑 level. Further analysis of the x-ray emission data reveals three additional features that radiate at constant loss energy that are attributed to combinations of Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ) → Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ), charge-transfer O 2⁢𝑝→Cr 3⁢𝑑, and crystal-field Cr⁢ 3⁢𝑑⁡(𝑡 2⁢𝑔 )→Cr⁢ 3⁢𝑑⁡(𝑒 𝑔 ) excitations. These assignments and their energies are supported by density-functional theory calculations, the accuracy of which we demonstrate by hard x-ray valence-photoemission measurements. Atomic multiplet calculations, which include crystal-field effects, help interpret x-ray photoelectron and x-ray absorption spectra of the covalently mixed Cr ion. Resonant Cr K-𝐿 2,3 ⁢𝐿 2,3 Auger-electron emission spectra support a ligand-to-metal nature of the charge-transfer process while highlighting the charge sensitivity differences between photon-in/electron-out and photon-in/photon-out spectroscopies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coordinated time variability of multi-phase ultra-fast outflows in J132216.25 + 052446.3

ABSTRACT We present a time variability analysis of broad absorption lines (BAL; spread over the velocity range of 5800–29 000 km s−1) seen in the spectrum of J132216.25 + 052446.3 (zem = 2.04806) at ten different epochs spanning over 19 yr. The strongest absorption component (BAL-A; spread over 5800–9900 km s−1) is made up of several narrow components having velocity separations close to C iv doublet splitting. The C iv, N v, and Si iv absorption from BAL-A show correlated optical depth variability without major changes in the velocity structure. A very broad and shallow absorption (BAL-C; spread over the velocity range 15 000–29 000 km s−1) emerged during our monitoring period coinciding with a dimming episode of J1322 + 0524. All the identified absorption lines show correlated variability with the equivalent widths increasing with decreasing flux. This together with the C iv emission line variability is consistent with ionization being the main driver of the correlated variability. The observed UV-continuum variations are weaker than what is required by the photoionization models. This together with a scatter in the C iv equivalent width at a given continuum flux can be understood if variations of the C iv ionizing photons are much larger than that of the UV continuum, the variations in the ionizing photon and UV fluxes are not correlated and/or the covering factor of the flow varies continuously. We suggest BAL-A is produced by a stable clumpy outflow located beyond the broad emission line region and BAL-C is a newly formed wind component located near the accretion disc and both respond to changes in the ionizing continuum.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Partial densities of states from x-ray absorption and Auger electron spectroscopy: Use of core-hole memory

Ag L 3 edge x-ray absorption and L 3 −M 4,5 M 4,5 Auger electron spectra have been measured and simulated for a variety of x-ray electric-field polarization and Auger electron emission directions. The theory relies on density-functional theory, use of the Bethe–Salpeter equation, atomic multiplet theory, and a simplified model for the Auger line shape and its dependence on photon energy. We also demonstrate that partial densities of states for dT 2g , dE g , and sA g symmetry partial-wave channels at the Ag site in the solid can be deduced from the experimental measurements with only atomic theoretical input, i.e., with no solid-state theory other than assuming a Fermi edge.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Efficient prediction of attosecond two-colour pulses from an X-ray free-electron laser with machine learning

Abstract X-ray free-electron lasers are sources of coherent, high-intensity X-rays with numerous applications in ultra-fast measurements and dynamic structural imaging. Due to the stochastic nature of the self-amplified spontaneous emission process and the difficulty in controlling injection of electrons, output pulses exhibit significant noise and limited temporal coherence. Standard measurement techniques used for characterizing two-coloured X-ray pulses are challenging, as they are either invasive or diagnostically expensive. In this work, we employ machine learning methods such as neural networks and decision trees to predict the central photon energies of pairs of attosecond fundamental and second harmonic pulses using parameters that are easily recorded at the high-repetition rate of a single shot. Using real experimental data, we apply a detailed feature analysis on the input parameters while optimizing the training time of the machine learning methods. Our predictive models are able to make predictions of central photon energy for one of the pulses without measuring the other pulse, thereby leveraging the use of the spectrometer without having to extend its detection window. We anticipate applications in X-ray spectroscopy using XFELs, such as in time-resolved X-ray absorption and photoemission spectroscopy, where improved measurement of input spectra will lead to better experimental outcomes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Enhanced magnetic and optical properties of Y 3 Fe 5 O 12 (YIG) films with Au nanoinclusions

Y 3 Fe 5 O 12 (YIG) thin films are well known for their ferrimagnetic insulating property and low Gilbert damping coefficient (α), allowing them to be used for various spintronic applications and as magneto-optical isolators for photonic devices. Instead of doping, incorporation of plasmonic metals as nanoinclusions could be a promising route for improved magneto-optical coupling properties. In this work, YIG–Au nanocomposites have been deposited with ferrimagnetic insulating YIG as the matrix and Au nanoinclusions which introduce plasmonic absorption, optical anisotropy, and hyperbolic properties. Films with varying Au nanoinclusion densities have been processed and annealed to compare with the as-deposited ones. The films that had low Au nanoinclusion density and were annealed presented a lower magnetic damping coefficient of 2.84 × 10 −4 than the pure YIG film (9.66 × 10 −4 ). The as-deposited film with the highest Au density shows the strongest hyperbolic properties among all samples. These results demonstrate that both magnetic damping and optical properties can be tuned through deposition conditions in YIG–Au nanocomposite thin films, allowing for a balance of both properties. This YIG–Au nanocomposite system presents promising potential in next-generation opto-spintronic devices.

Quigley, Lizabeth [Purdue Univ., West Lafayette, I↗
DOE OSTI2020

Performance of Scintillation Detectors Based on Quantum Dots in a Semiconductor Matrix (Final Technical Report)

InAs Quantum Dots (QDs) embedded into GaAs semiconductor waveguide have unique scintillation properties, valuable for nuclear security, medical imaging, and high energy physics. In this work, we developed thick (~25um) epitaxial heterostructres with high luminescence efficiency composed of self-assembled nano-engineered InAs QDs grown by molecular beam epitaxy. In this type of detector, the GaAs matrix acts as a stopping material for charged particles or photons generating electrons captured by the QDs acting as luminescence centers. The QD medium is designed to provide fast capture of electrons into QDs (few ps), high QD luminescence efficiency at room temperature (>50%), and strong red-shift of photoluminescence (PL) from the GaAs absorption edge (>250nm). Typical devices consist of a 10-25um thick GaAs layer with embedded sheets of modulation p-type doped InAs QDs and an InGaAs photodetector tuned to the QD emission wavelength. The thick GaAs layer acts also as a waveguide when layer-transferred onto a low-index substrate. Waveguiding and self-absorption (~1cm -1 ) were studied using photoluminescence with scanning laser excitation and modeled with ray optics approximation and geometrical coupling of high-index waveguide to a collection fiber. Scintillating signals from α-particles were analyzed with both an external photodiode (PD) and an integrated PD which provided an improved optical coupling. In the former case, the external InGaAs PD was air-coupled to the scintillator and had the light collection efficiency of about 1% corresponding to limited light extraction through a planar interface with air due to total internal reflection. The mean charge collected by the integrated PD was in the range of (3÷5)×10 4 photoelectrons per 1 MeV of deposited energy, or ~13-20% of the theoretically achievable light yield. Timing of the integrated device was measured by wire-bonding it to the input of an 8 GHz IC. The scintillation response shows an extremely fast 0.3-0.6 ns decay constant and about 40-70 ps time resolution, limited by the system noise. The combined light yield and decay time makes the InAs/GaAs QD heterostructures the fastest high yield scintillation material reported making it valuable for high energy physics and medical imaging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Extremely Slow Trap-Mediated Hole Relaxation in Room-Temperature InP/ZnSe/ZnS Quantum Dots

Time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy have been used to elucidate the hole relaxation dynamics in high-quality InP/ZnSe/ZnS quantum dots (QDs) at room temperature. In QDs having an In/P ratio close to 1:1, hole cooling is fast compared to the ~40 ps time-correlated photon-counting instrument response. However, in QDs that luminesce at wavelengths greater than around 600 nm and have excess indium, a significant fraction of the PL exhibits a slower rise time. In this case, the PL rises over a range of timescales varying from close to the instrument response to approximately 300–400 ps. The time constant of the slowest component increases with increasing InP core size and the fraction of the PL that has the slow rise time increases with excess indium in the particle. In all cases, a slow rise time and any spectral evolution on that timescale are absent in the TA results, indicating that the slow dynamics may be assigned to relaxation in the valence band. QDs emitting at wavelengths below 560 nm show very different dynamics, exhibiting a barely detectable <50 ps rise time. Based on these results and measured elemental compositions, the slow hole relaxation is assigned to the transient population of indium-based traps in the ZnSe shell that are above the valence band edge only for the larger, red-emitting QDs. Here, the relative trap to band edge relaxation rates can be understood in terms of effective mass approximation hole wave function calculations, which show that the relaxation rate is largely determined by the extent to which the hole wave function in the lowest exciton penetrates into the ZnSe shell, overlapping the trapped-hole wave functions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Interfacial electronic states of misfit heterostructure between hexagonal ZnO and cubic NiO

The combination of materials with dissimilar symmetries can induce a large amount of stress at the interfacial layer of films, thereby promoting the appearance of novel properties in related devices. The study of the interfacial state is critical for determining the inner mechanism. In this work, the misfit heterostructure between cubic NiO films and wurtzite ZnO is investigated. A NiO film grown using molecular beam epitaxy on a ZnO substrate shows a highly (100)-oriented texture featuring three domains with a rotation angle of 30°, which is in agreement with first principles calculations. Misfit-induced dislocations and lattice distortions within the interfacial layers of the NiO film give rise to interfacial electronic states, which are different from those in bulk; these electronic states are analyzed by in situ synchrotron-based x-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, x-ray absorption spectroscopy, and ex situ electron energy loss spectroscopy. Additionally, the origin of these interfacial states is discussed. This work aims to provide insights for the integration of semiconducting hexagonal ZnO with other functional materials that have a cubic symmetry. Additionally, we investigate the integration of photon and electron-based techniques to explore the interfacial states of complex interfaces, which is an important aspect of material science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Vacuum-ultraviolet absorption cross-sections of functionalized four-carbon species

Absorption cross-sections were measured in the vacuum ultraviolet from 5.17 – 9.92 eV using differential absorption spectroscopy for 33 four-carbon species: n-butane, trans-2-butene, cis-2-butene, butanal, butyric acid, ethyloxirane, trans-2,3-dimethyloxirane, cis-2,3-dimethyloxirane, 2-methyloxetane, 2,2'-bioxirane, vinyl oxirane, 3,4-epoxybutan-2-one, diacetyl, diethyl ether, ethyl vinyl ether, vinyl acetate, acetic anhydride, 1-butanol, 3-buten-1-ol, 1–hydroxy-butan-2-one, 1–hydroxy-butan-3-one, 2,3-epoxybutan-1-ol, 3,4-epoxybutan-1-ol, 2-oxetanemethanol, butanone, methyl vinyl ketone, 4H-1,3-dioxine, allyl formate, 2-oxobutanal, 4-hydroxybutanal, 2-methyloxetan-3-one, cis–but-2-en-1-ol, and trans-2–but-enal. Uncertainties were quantified in all cases by accounting for errors in gas-phase concentration, experimental repeatability, and signal-to-noise ratio as a function of photon energy. With the exception of 2-oxobutanal, which is reported with an uncertainty of 10%, convolving the sources of error using the root-sum-square method led to an upper limit of 5% uncertainty above the detection limit, which is largely attributable to chemical purity. Here, the primary objective of the present work is to provide absolute cross-sections along with quantified uncertainty limits. The majority of the absorption spectra, which reflect electronic transitions such as σ → σ* and n → σ*, are reported for the first time and provide insight into fundamental chemical physics, such as vibrational band structure and Rydberg transitions. The quantitative spectra in the present work facilitates the discovery of chemical intermediates that support improvement in the accuracy of computational models for low-temperature combustion and atmospheric chemistry.

biofuels↗
DOE OSTI2021

Highly efficient terahertz photoconductive metasurface detectors operating at microwatt-level gate powers

Despite their wide use in terahertz (THz) research and technology, the application spectra of photoconductive antenna (PCA) THz detectors are severely limited due to the relatively high optical gating power requirement. This originates from poor conversion efficiency of optical gate beam photons to photocurrent in materials with sub-picosecond carrier lifetimes. Here we show that using an ultra-thin (160 nm), perfectly absorbing low-temperature grown GaAs metasurface as the photoconductive channel drastically improves the efficiency of THz PCA detectors. This is achieved through perfect absorption of the gate beam in a significantly reduced photoconductive volume, enabled by the metasurface. This Letter demonstrates that sensitive THz PCA detection is possible using optical gate powers as low as 5 µW—three orders of magnitude lower than gating powers used for conventional PCA detectors. We show that significantly higher optical gate powers are not necessary for optimal operation, as they do not improve the sensitivity to the THz field. This class of efficient PCA THz detectors opens doors for THz applications with low gate power requirements.

47 OTHER INSTRUMENTATION↗