SEARCH · Engineering Papers

Results for “Perovskite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Higher Throughput, Lower Cost Processing of Flexible Perovskite Solar Cells by Photonic Curing

The objectives of this SETO project are to explore whether photonic curing can be used to perform annealing in perovskite solar cell (PSC) fabrication, and if so, whether it can enable high-throughput PSC manufacturing. The successful outcome of the project will reduce manufacturing cost towards realizing the SETO goal of the Levelized cost of electricity (LCOE) $0.03/kWh by 2030. The project is a collaboration between Hsu’s group at the University of Texas at Dallas (UTD) and NovaCentrix, an Austin TX based company that pioneered the PulseForge® photonic curing tools and has expertise in applying this technology to printed electronics. Thin-film synthesis typically involves a thermal annealing step to convert from precursors to final material phases, to obtain the desired crystalline phase, or to improve materials structural or electrical properties. However, thermal annealing typically requires high temperatures that are incompatible with inexpensive plastic substrates and annealing times lasting tens-to-hundreds of minutes, making it incompatible with roll-to-roll (R2R) manufacturing at a desirable web speed. Photonic curing uses a flash Xe lamp to deliver short (20 µs to 100 ms) but high intensity (up to 50 kW/cm 2 ) pulses of broadband light (200 – 1500 nm) to the sample. It has been successfully applied to sinter printed metal nanoparticle inks into conductive patterns. This project aimed to extend the applications of photonic curing to convert halide perovskite films and transparent metal oxide transport layers. Despite the interruption by COVID-19, we have achieved significant accomplishments to establish photonic curing as a viable technology for the high-throughput manufacturing of PSCs. (1) We demonstrated that photonic curing can convert both metal oxide transport layer and halide perovskite absorber in the PSCs and successfully made flexible PSCs on Corning Willow glass® (WG)/ indium tin oxide (ITO) substrates without any thermal annealing steps. These photonically cured devices achieve performance comparable to conventional thermally annealed devices but were fabricated with a total processing time reduced by six orders of magnitude. We also show that photonic curing can achieve desirable web speed (up to 26 m/min) and large-area uniformity. (2) By establishing photonic curing processing phase spaces for the perovskite, we show that the longer pulses are more forgiving in small variation in the photonic curing conditions, making it more suitable for R2R manufacturing. (3) Our results clearly illustrated the importance of improving mechanical and optical properties of transparent electrodes on flexible substrates. (4) We also performed fundamental studies that elucidate the interactions between perovskite absorber and metal oxide transport layer that can undermine the PSC stability. Five refereed journal papers in top journals (ACS Energy Letters, npj Flexible Electronics, ACS Applied Energy Materials, Materials Advances, and Frontiers in Energy Research), one conference proceeding (PVSC-47), six conference presentations (PVSC and Materials Research Society meetings), and a Ph.D. dissertation (Trey B. Daunis) were produced under this project. Energy Materials Corporation (EMC) has forecast that with a 1.5 m wide web moving at a web speed of 30 m/min, R2R processing of PSC could provide up to 4 GW/year for a single R2R assembly line. Replacing thermal annealing with photonic curing, as demonstrated by the accomplishments of this project, is necessary to realize such an energy production goal.

14 SOLAR ENERGY↗

DOE OSTI2022

Scalable Approaches to Address Thermomechanical and Chemical Instabilities in Metal Halide Perovskites

We will discuss our group’s recent efforts to address the thermomechanical and chemical instabilities of metal halide perovskites through multiple approaches. These approaches cover several length scales and aim to provide better understanding of behavior in all stages of processing—i.e., precursor behavior in inks, growth behavior of films during printing, and resulting optoelectronic properties and robustness of perovskite films and devices. We will highlight our efforts toward scalable printing of high-quality perovskite using the method recently invented by our group restricted area printing by ink drawing (RAPID). Additionally, we will discuss how molecular additives in precursor inks can influence the stability of the inks and resultant films. Finally, we will also describe our recent progress in addressing the poor mechanical toughness of perovskite using multifunctional nanofiber reinforcements. Together, all of these concepts are complimentary and compatible with scalable printing of perovskites and a necessary step towards developing a viable technology with long operational lifetimes.

Printz, Adam↗

DOE OSTI2020

Nanostructure-containing organic-metal halide perovskites

Described herein is a device that includes an alkyl ammonium metal halide perovskite layer, and a nanostructured semiconductor layer in physical contact with the alkyl ammonium metal halide perovskite layer. The alkyl ammonium metal halide perovskite layer may include methyl ammonium cations. The alkyl ammonium metal halide perovskite layer may include anions of at least one of chlorine, bromine, astatine, and/or iodine. The alkyl ammonium metal halide perovskite layer may include cations of a metal in a 2+ valence state. The metal may include at least one of lead, tin, and/or germanium.

14 SOLAR ENERGY↗

DOE OSTI2020

Heterojunction perovskite photovoltaic devices and methods of making the same

An aspect of the present disclosures is a method that includes applying a perovskite precursor solution to a first solid conductor and treating the perovskite precursor solution such that a first portion of the perovskite precursor solution is converted to a first solid perovskite, where the first solid conductor comprises a first charge transport characteristic, which is predominantly p-type or predominantly n-type, and the treating results in the first solid perovskite having a second charge transport characteristic that is substantially the same as the first charge transport characteristic.

14 SOLAR ENERGY↗

DOE OSTI2021

Vapor phase transport system and method for depositing perovskite semiconductors

Vapor phase transport systems and methods of depositing perovskite films are described. In an embodiment, a deposition method includes feeding a perovskite solution or constituent powder to a vaporizer, followed by vaporization and depositing the constituent vapor as a perovskite film. In an embodiment, a deposition system and method includes vaporizing different perovskite precursors in different vaporization zones at different temperatures, followed by mixing the vaporized precursors to form a constituent vapor, and depositing the constituent vapor as a perovskite film.

Bush, Kevin M. Alexander↗

DOE OSTI2024

Vapor phase transport systems for depositing perovskite semiconductors

Bush, Kevin Alexander↗

DOE OSTI2021

Band Edge Control of Quasi–2D Metal Halide Perovskites for Blue Light–Emitting Diodes with Enhanced Performance

Perovskite light–emitting diodes (PeLEDs) have received great attention for their potential as next–generation display technology. While remarkable progress has been achieved in green, red, and near–infrared PeLEDs with external quantum efficiencies (EQEs) exceeding 20%, obtaining high performance blue PeLEDs remains a challenge. Poor charge balance due to large charge injection barriers in blue PeLEDs has been identified as one of the major roadblocks to achieve high efficiency. Here band edge control of perovskite emitting layers for blue PeLEDs with enhanced charge balance and device performance is reported. By using organic spacer cations with different dipole moments, that is, phenethyl ammonium (PEA), methoxy phenethyl ammonium (MePEA), and 4–fluoro phenethyl ammonium (4FPEA), the band edges of quasi–2D perovskites are tuned without affecting their band gaps. Furthermore, detailed characterization and computational studies have confirmed the effect of dipole moment modification to be mostly electrostatic, resulting in changes in the ionization energies of ≈0.45 eV for MePEA and ≈ –0.65 eV for 4FPEA based thin films relative to PEA–based thin films. With improved charge balance, blue PeLEDs based on MePEA quasi–2D perovskites show twofold increase of the EQE as compared to the control PEA based devices.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Structural Diversity and Magnetic Properties of Hybrid Ruthenium Halide Perovskites and Related Compounds

There has been a great deal of recent interest in extended compounds containing Ru 3+ and Ru 4+ in light of their range of unusual physical properties. Many of these properties are displayed in compounds with the perovskite and related structures. Here we report an array of structurally diverse hybrid ruthenium halide perovskites and related compounds: MA 2 RuX 6 (X=Cl or Br), MA 2 MRuX 6 (M=Na, K or Ag; X=Cl or Br) and MA 3 Ru 2 X 9 (X=Br) based upon the use of methylammonium (MA=CH 3 NH 3 + ) on the perovskite A site. The compounds MA 2 RuX 6 with Ru 4+ crystallize in the trigonal space group R3¯m and can be described as vacancy-ordered double-perovskites. The ordered compounds MA 2 MRuX 6 with M + and Ru 3+ crystallize in a structure related to BaNiO 3 with alternating MX 6 and RuX 6 face-shared octahedra forming linear chains in the trigonal P3¯m space group. The compound MA 3 Ru 2 Br 9 crystallizes in the orthorhombic Cmcm space group and displays pairs of face-sharing octahedra forming isolated Ru 2 Br 9 moieties with very short Ru–Ru contacts of 2.789 Å. The structural details, including the role of hydrogen bonding and dimensionality, as well as the optical and magnetic properties of these compounds are described. The magnetic behavior of all three classes of compounds is influenced by spin–orbit coupling and their temperature-dependent behavior has been compared with the predictions of the appropriate Kotani models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Sustainable materials acceleration platform reveals stable and efficient wide-bandgap metal halide perovskite alloys

The vast chemical space of emerging semiconductors, like metal halide perovskites, and their varied requirements for semiconductor applications have rendered trial-and-error environmentally unsustainable. Here, in this work, we demonstrate RoboMapper, a materials acceleration platform (MAP), that achieves 10-fold research acceleration by formulating and palletizing semiconductors on a chip, thereby allowing high-throughput (HT) measurements to generate quantitative structure-property relationships (QSPRs) considerably more efficiently and sustainably. We leverage the RoboMapper to construct QSPR maps for the mixed ion FA 1-y Cs y Pb(I 1-x Br x ) 3 halide perovskite in terms of structure, bandgap, and photostability with respect to its composition. We identify wide-bandgap alloys suitable for perovskite-Si hybrid tandem solar cells exhibiting a pure cubic perovskite phase with favorable defect chemistry while achieving superior stability at the target bandgap of ~1.7 eV. RoboMapper’s palletization strategy reduces environmental impacts of data generation in materials research by more than an order of magnitude, paving the way for sustainable data-driven materials research.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Phosphonic-Acid-Reinforced Polymer Hole Transport Layers for Deployable p-i-n Perovskite Photovoltaics

The long-term durability prospects of halide perovskite solar cells are rapidly improving; however, the interface between the hole transport layer (HTL) and the perovskite remains a source of degradation. Alone, polymer- or carbazole-based HTLs suffer from incomplete coverage of the underlying indium tin oxide glass, leading to degradation and compromised performance. Here, we show a multi-HTL approach whereby a polymer HTL is reinforced using a phosphonic acid modification leading to better protection of the buried perovskite interface and more columnar growth of perovskite film, resulting in an ~40-mV open-circuit voltage (VOC) improvement indicative of suppressed interfacial recombination across multiple p-i-n device architectures. Solar cells with this reinforced HTL show higher tolerance to several accelerated stress tests. We report, among the best durabilities for unencapsulated cells, a T90 ~3,000 h (T80 ~5,900 h) at 65 degrees C under continuous 1.2 sun AM 1.5G illumination and maximum power point tracking, representing a nearly 4-fold increase compared with [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz)-only devices. Furthermore, we deployed a device with this reinforced HTL on a cube satellite, with long-duration operational space testing results exceeding T80 for the complete mission duration of ~100 days in low Earth orbit.

14 SOLAR ENERGY↗

DOE OSTI2020

Perspectives on intrinsic toughening strategies and passivation of perovskite films with organic additives

We report on the inclusion of 5-aminovaleric acid (5-AVA)—a bulky, long-chained organic molecule—as an additive to enhance the mechanical integrity of hybrid perovskite films. We studied a range of organic cation additives and found that 5-AVA was the most effective at improving cohesion energy, a key metric of mechanical reliability. MAPbI 3 films reinforced with 5-AVA added in 5% concentration increased cohesion energy 12-fold from 0.53 J/m 2 to 6.04 J/m 2 , an effect which is attributed to increased plasticity and crack deflection around grain boundaries of the additive-containing perovskite. The addition of 5-AVA also improves V oc in perovskite solar cells and carrier lifetimes with a minimal decrease in PCE, attributed to passivation reducing defect and trap densities. A Tauc plot analysis of the bandgap shows that 5-AVA increases the band gap of the perovskite, correlating with reduced film stress compared to MAPbI 3 . Finally, the usage of 5-AVA improves the intrinsic thermomechanical reliability, but this improvement comes at the penalty of slightly reduced device efficiency due to reduced charge extraction from the presence of the bulky, insulating organic additive.

14 SOLAR ENERGY↗

DOE OSTI2022

Pseudo-halide anion engineering for efficient quasi-2D Ruddlesden-Popper tin perovskite solar cells

Quasi-two-dimensional (2D) organic-inorganic hybrid tin perovskites have emerged as promising alternatives to lead-based perovskites in thin-film photovoltaics because of their reduced toxicity and improved stability. However, the undesired small n-value 2D phases and disordered crystal orientation enormously restrict the efficiency of quasi-2D tin perovskite solar cells (PSCs) due to uncontrollable nucleation and crystal growth processes. Here, we propose a mixed pseudo-halide anion engineering approach by using acetate (Ac - ) and tetrafluoroborate (BF 4 - ) anions to make quasi-2D Ruddlesden-Popper perovskites with a target formula of PEA 2 FA 4 Sn 5 I 16 . We find that the mixed Ac - and BF 4 - anions can not only promote homogeneously distributed PEA + cations in the precursor by effectively breaking the PEA + ···PEA + stacking but also retard the crystallization process by coordinating with unbonded SnI 2 , thereby, significantly reducing small n-value 2D phases, improving the crystal orientation, and suppressing the Sn 2+ oxidation. The resulting PSC exhibits up to 9% power conversion efficiency and 400 h stability.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Perovskite-Derived Cs 2 SnCl 6 –Silica Composites as Advanced Waste Forms for Chloride Salt Wastes

Advanced materials and processes are required to separate halides and fission products from complex salt waste streams associated with the chemical reprocessing of used nuclear fuels and molten salt reactor technologies for immobilization into chemically durable waste forms. Here, in this work, we explore an innovative concept using metal-halide perovskites as advanced host phases to incorporate Cs and Cl with very high waste loadings. Wet chemistry-synthesized Cs 2 SnCl 6 powders from CsCl salt solutions are successfully encapsulated into a silica matrix to form a composite using low-temperature spark plasma sintering with tunable Cs and Cl loadings up to 31 wt.% and 26 wt.%, respectively. Chemical durability testing of the composite waste forms by semi-dynamic leaching experiments demonstrates that incongruent leaching mechanism dominated. The metal-halide perovskite-silica composite waste forms display exceptional chemical durability with the long-term release rates of Cs and Cl comparable to or outperforming the state-of-the-art waste form materials but with significantly higher waste loadings. The scalable synthesis of the metal-halide perovskite from wet-chemistry processes opens up new opportunities in designing perovskite-glass composite waste forms for salt wastes with very high waste loadings and exceptional chemical durability for the sustainable development of advanced fuel cycles and next-generation reactor technologies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Intersubband Transitions in Lead Halide Perovskite-Based Quantum Wells for Mid-Infrared Detectors

Due to their excellent optical and electrical properties as well as versatile growth and fabrication processes, lead halide perovskites have been widely considered as promising candidates for green energy and applications related to optoelectronics. Here, we investigate their potential applications at infrared wavelengths by modeling the intersubband transitions in perovskite-based quantum well systems. Both single-well and double-well structures are studied, and their energy levels as well as the corresponding wave functions and intersubband transition energies are calculated by solving the one-dimensional Schrödinger equations. Via adjustment of the quantum well and barrier thicknesses, the intersubband transition energies can be tuned to cover a broad infrared wavelength range. We also find that the lead halide perovskite-based quantum wells possess high absorption coefficients. In conclusion, the widely tunable transition energies and high absorption coefficients of the perovskite-based quantum well systems, combined with their unique material and electrical properties, may enable an alternative material system for infrared photodetector applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2020

Lead-free Cesium Europium Halide Perovskite Nanocrystals

Because of the toxicity of lead, searching for a lead-free halide perovskite semiconducting material with comparable optical and electronic properties is of great interest. Rare-earth-based halide perovskite represents a promising class of materials for this purpose. In this work, we demonstrate the solution-phase synthesis of single-crystalline CsEuCl 3 nanocrystals with a uniform size distribution centered around 15 nm. The CsEuCl 3 nanocrystals have photoluminescence emission centered at 435 nm, with a full width at half-maximum of 19 nm. Furthermore, CsEuCl 3 nanocrystals can be embedded in a polymer matrix that provides enhanced stability under continuous laser irradiation. Lead-free rare-earth cesium europium halide perovskite nanocrystals represent a promising candidate to replace lead halide perovskites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

SMART Perovskite Growth: Enabling a Larger Range of Process Conditions

Cost-effective, high-throughput industrial applications of metal-halide perovskites require a highly tolerant method (i.e., wide process window) that produces high-quality materials with a short annealing time. Here, we introduce a Seed Modulation for ARTificially controlled nucleation (SMART) process that enables rapid fabrication of high-quality perovskite films under a wide set of initial input parameters. Additionally, we characterized the thin-film evolution from the perspective of crystallinity, surface potential, diffusivity, surface carrier dynamics, and interfacial recombination. We find that surface and subsurface defects primarily determine the performance of materials and devices. By modulating the seeds for perovskite nucleation, we were able to improve the overall crystallization. We achieved a >20% power conversion efficiency using only a 5 min annealing step, and we found that the annealing window is widened such that differing initial conditions achieve similar quality. Furthermore, we demonstrated reproducibility and performance improvement in larger-area perovskite cells by incorporating the SMART process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Robust Unencapsulated Perovskite Solar Cells Protected by a Fluorinated Fullerene Electron Transporting Layer

The emergent perovskite photovoltaics technology faces challenges like the long-term durability combining moisture, thermal, and photo stresses that prevents them from competing with established technologies. In this work, we introduce a series of new fluorinated fullerenes as an electron-transporting layer (ETL) for robust perovskite photovoltaics that deliver a high power conversion efficiency of 21.27% with substantially improved durability against environmental stressing. The hydrophobic nature of the new fullerene protects the unencapsulated perovskite cell with stability over 1400 h in 85% relative humidity. Notably, the unencapsulated device maintained 80% of their original performance (T-80) after being immersed in water for over 10 min. Detailed characterizations suggest that the fluorinated fullerene can immobilize the cations in perovskites and passivate the surface traps. Therefore, the T-80 lifetime of the devices under constant illumination reached 1920 h. On the basis of the accelerated test, we estimate a lifetime approaching 10 years with encapsulation. The successful demonstration of the new ETL can stimulate further research and momentum for future photovoltaic technology development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Bromine Incorporation and Suppressed Cation Rotation in Mixed-Halide Perovskites

Engineering the composition of perovskite active layers has been critical in increasing the efficiency of perovskite solar cells (PSCs) to more than 25% in the latest reports. Partial substitutions of the monovalent cation and the halogen have been adopted in the highest-performing devices, but the precise role of bromine incorporation remains incompletely explained. Here we use quasi-elastic neutron scattering (QENS) to study, as a function of the degree of bromine incorporation, the dynamics of organic cations in triple-cation lead mixed-halide perovskites. We find that the inclusion of bromine suppresses low-energy rotations of formamidinium (FA), and we find that inhibiting FA rotation correlates with a longer-lived carrier lifetime. When the fraction of bromine approaches 0.15 on the halogen site—a composition used extensively in the PSC literature—the fraction of actively rotating FA molecules is minimized: indeed, the fraction of rotating FA is suppressed by more than 25% compared to the bromine-free perovskite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗