Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perception”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Economic Benefits of Advanced Materials in Nuclear Power Systems

One of the key obstacles for the commercial deployment of advanced fast reactors (for either transuranic element burning or power generation) is the capital cost. There is a perception of higher capital cost for fast reactor systems than advanced light water reactors (ALWR). However, the cost estimates for a fast reactor come with a large uncertainty due to the fact that far fewer fast reactors have been built than LWR facilities. Furthermore, the large variability of industrial cost estimates complicates accurate comparisons. For example, under the Gen IV program, the Japanese Sodium Fast Reactor (JSFR) has a capital cost estimate that is lower than current LWR s, and considerably lower than that for the PRISM design (which is arguably among the most mature of today s fast reactor designs). Further reductions in capital cost must be made in US fast reactor systems to be considered economically viable. Three key approaches for cost reduction can be pursued. These include design simplifications, new technologies that allow reduced capital costs, and simulation techniques that help optimize system design. While it is plausible that improved materials will provide opportunities for both simplified design and reduced capital cost, the economic benefit of advanced materials has not been quantitatively analyzed. The objective of this work is to examine the potential impact of advanced materials on the capital investment costs of fast nuclear reactors.

Busby, Jeremy T↗

Strength and ductility of additively manufactured 316L stainless steel: Impact of neutron irradiation and data variability

Here, this article presents the mechanical properties of additively manufactured (AM) 316L stainless steel processed via the laser powder bed fusion (LPBF) method, focusing on the effects of neutron irradiation on mechanical properties and the variability in strength and ductility data. The rapid melting-solidification process and multiple heating-cooling cycles inherent in LPBF typically result in a fine, metastable microstructure with significant local variability. AM 316L builds of varying thicknesses were fabricated, and SS-J3 miniature tensile specimens were machined from six different locations. These specimens were irradiated with fast neutrons to doses of 2 and 10 dpa at target temperatures of 300 °C and 600 °C. Post-irradiation tensile tests were conducted at room temperature, 300 °C, and 600 °C. Compared to conventional 316L stainless steel, AM 316L exhibited higher initial strength but lower ductility. Irradiation at 300 °C caused significant hardening and prompt necking at yield, with limited uniform ductility, although embrittlement was not observed up to 10 dpa. While neutron irradiation, particularly at 600 °C, increased the variability in strength and ductility data, no clear dependence of mechanical properties on build thickness or sampling location was found—contrary to the conventional perception that AM materials may exhibit high property variability. Furthermore, we observed that the variability in property data for LPBF-processed 316L was relatively low compared to that of wrought 316L stainless steel. This reduced variability in AM 316L steel may be attributed to its highly metastable, stress-containing microstructure, which is discussed in the context of general tensile property variations.

Additively manufactured 316L stainless steel↗

Polysulfide-incompatible additive suppresses spatial reaction heterogeneity of Li-S batteries

Rational electrolyte engineering for practical pouch cells remains elusive because the correlation between the cathode/solid-electrolyte interphase layer and cell-level reaction behavior is poorly understood. Here, by combining multiscale characterization and computational modeling, we show that—counter to the conventional perception of polysulfide-incompatible additives—the spontaneous reaction of sparingly solvated polysulfides with Lewis acid additives (LAAs) can induce in situ formation of a homogeneous interphase on thick and tortuous S cathode. Multiscale synchrotron X-ray characterization consistently affirms that such interface design could effectively eliminate the notorious problems of polysulfide shuttle and lithium corrosion and, more importantly, provide an interconnected “ion transport highway” to alleviate the uneven ion transport within the tortuous S cathode. Hence, this design dramatically reduces the reaction heterogeneity of lithium-sulfur (Li-S) pouch cells under lean electrolyte conditions. Further, this work resolves controversy around the role of polysulfide-incompatible additives in high-energy Li-S pouch cells and highlights the importance of suppressing reaction heterogeneity for practical batteries.

36 MATERIALS SCIENCE↗

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗

Consequences of utilizing a redox-active polymeric binder in Li-ion batteries

Development of new polymeric binders can help enable the use of silicon-rich anodes in Li-ion batteries, by providing stronger adhesion to the active material particles. The compositional features that improve interfacial interactions and mechanical properties can often impart electronic conductivity and redox activity to these polymers, which are generally seen as beneficial to cell performance. Alternatively, it is also possible that the addition of charge-transferring centers to the electrode can accelerate cell degradation. Here, we use an aromatic polyimide (∼320 mA h/g of reversible capacity) to explore how a redox-active conductive polymer can affect cell performance. We demonstrate that the lithiated polymer is less stable than the traditional binders upon storage, leading to increased rates of calendar aging. Furthermore, we determine that the adhesion properties of the polymer deteriorate upon repeated cycling, to an extent that is proportional to the degree of delithiation of the binder. More critically, we establish that progressive degradation of the redox behavior of the polymer leads to the release of “extra” Li + into the cell, which can give the false perception of good performance even under conditions of poor stability. In conclusion, our work suggests that redox-active conductive binders can sometimes be detrimental to cell performance, and that works evaluating new polymers must include careful experimental validation under realistic conditions.

25 ENERGY STORAGE↗

Exploring the effectiveness of a back-supporting exosuit: Trunk muscle activity and user experience in controlled and real-world shoveling scenarios

Introduction: This study evaluates the effectiveness of a passive wearable exosuit (HeroWear Apex) in reducing lumbar muscle effort while shoveling. Method: Two experiments were conducted, involving: (1) moving calibrated sandbags at a predefined pace in a laboratory, and (2) moving loose dirt in an in-field setting. Studies were designed to emulate real-world shoveling conditions at Department of Energy - Environmental Management sites. Muscle activity of the lumbar and oblique muscles was analyzed, along with user perceptions. Due to the asymmetric nature of shoveling, analysis of muscle activity was split between the weighted and unweighted sides, with the weighted side being defined as the side of the body closest to the head of the shovel in a neutral posture. Results: While donning the device, both experiments showed a significant decrease in muscle activity for at least one lumbar muscle on the weighted side. Participants rated the device with a high usability score, and perceived exertion ratings were significantly lower while wearing the exosuit. While opinions varied regarding the device’s helpfulness, participants felt the device was comfortable and did not hinder motion during the task. Practical applications: The reduction in back muscle activity associated with wearing the exosuit has the potential to reduce muscle fatigue resulting from repetitive motions.

Exoskeleton↗

Crystal and magnetic study of the disordered perovskites Ca(Mn{sub 0.5}Sb{sub 0.5})O{sub 3} and Ca(Fe{sub 0.5}Sb{sub 0.5})O{sub 3}

We have investigated the double perovskites Ca{sub 2}MSbO{sub 6} (M = Mn, Fe) that have been prepared by solid-state reaction (M = Fe) and wet chemistry procedures (M = Mn). The crystal and magnetic structures have been studied from X-ray (XRD) and neutron powder diffraction (NPD) data. Rietveld refinements show that the crystal structures are orthorhombic (space group Pbnm) with complete disorder of M and Sb cations, so the formula should be rewritten as Ca(M{sub 0.5}Sb{sub 0.5})O{sub 3}. Due to this disorder no evidences of Jahn-Teller distortion can be observed in the MnO{sub 6} octahedra of Ca(Mn{sub 0.5}Sb{sub 0.5})O{sub 3}, in contrast with the ordered double perovskite Sr{sub 2}MnSbO{sub 6}. Ca(Fe{sub 0.5}Sb{sub 0.5})O{sub 3} behaves as an antiferromagnet with an ordered magnetic moment for Fe{sup 3+} of 1.53(4){mu}{sub B} and a propagation vector k = 0, as investigated by low-temperature NPD. The antiferromagnetic ordering is a result of the high degree of Fe/Sb anti-site disorder of the sample, which originates the spontaneous formation of Fe-rich islands, characterized by the presence of strong Fe-O-Fe antiferromagnetic couplings with enough long-range coherence to produce a magnetic contribution perceptible by NPD. By contrast, the magnetic structure of Ca(Mn{sub 0.5}Sb{sub 0.5})O{sub 3} cannot be observed by low-temperature NPD because the magnitude of the ordered magnetic moments is below the detection threshold for neutrons.

36 MATERIALS SCIENCE↗

What Students Think About (Nuclear) Radiation – Before and After Fukushima

Preparing successful science lessons is very demanding. One important aspect a teacher has to consider is the students' previous knowledge about the specific topic. This is why research about students' preconceptions has been, and continues to be, a major field in science education research. Following a constructivistic approach [R. Duit et al., International handbook of research on conceptual change, p. 629 (2008)], helping students learn is only possible if teachers know about students' ideas beforehand. Studies about students' conceptions regarding the major topics in physics education (e.g. mechanics, electrodynamics, optics, thermodynamics), are numerous and well-documented. The topic radiation, however, has seen very little empirical research about students' ideas and misconceptions. Some research was conducted after the events of Chernobyl [P. Lijnse et al., International Journal of Science Education 12, 67 (1990); B. Verplanken, Environment and Behavior 21, 7 (1989)] and provided interesting insight into some of the students' preconceptions about radiation. In order to contribute empirical findings to this field of research, our workgroup has been investigating the conceptions students have about the topic radiation for several years [S. Neumann et al., Journal of Science Education and Technology 21, 826 (2012)]. We used children's drawings and conducted short follow-up interviews with students (9 – 12 years old) and more detailed interviews with 15-year-old students. Both studies were originally done before the events in Fukushima and replicated a year later. We not only asked students about their general associations and emotions regarding the term radiation, but also examined the students' risk perceptions of different types of radiation. Through the use of open-ended questions we were able to examine students' conceptions about different types of radiation (including nuclear) that could be a hindrance to student learning. Our results show that students' associations with the term radiation are almost exclusively related to nuclear radiation. Their emotions concerning the word radiation are predominately negative, and the idea that radiation is something to be avoided is widespread among students. Since most students were not familiar with the idea of naturally occurring nuclear radiation, it does not seem surprising that a lot of them generally described radiation as something artificial and man-made. Also, none of the students interviewed mentioned applications of nuclear radiation in medicine or technology (besides its use in nuclear power plants). All of these results have shown to be even more prevalent in the interview session that was conducted after the tragic events in Fukushima in 2011. In this article, we will also include suggestions for improving the teaching of the topic radiation in school.

54 ENVIRONMENTAL SCIENCES↗

High-dimensional multivariate autoregressive model estimation of human electrophysiological data using fMRI priors

Multivariate autoregressive (MVAR) model estimation enables assessment of causal interactions in brain networks. However, accurately estimating MVAR models for high-dimensional electrophysiological recordings is challenging due to the extensive data requirements. Hence, the applicability of MVAR models for study of brain behavior over hundreds of recording sites has been very limited. Prior work has focused on different strategies for selecting a subset of important MVAR coefficients in the model to reduce the data requirements of conventional least-squares estimation algorithms. Here we propose incorporating prior information, such as resting state functional connectivity derived from functional magnetic resonance imaging, into MVAR model estimation using a weighted group least absolute shrinkage and selection operator (LASSO) regularization strategy. The proposed approach is shown to reduce data requirements by a factor of two relative to the recently proposed group LASSO method of Endemann et al (Neuroimage 254:119057, 2022) while resulting in models that are both more parsimonious and more accurate. The effectiveness of the method is demonstrated using simulation studies of physiologically realistic MVAR models derived from intracranial electroencephalography (iEEG) data. The robustness of the approach to deviations between the conditions under which the prior information and iEEG data is obtained is illustrated using models from data collected in different sleep stages. This approach allows accurate effective connectivity analyses over short time scales, facilitating investigations of causal interactions in the brain underlying perception and cognition during rapid transitions in behavioral state.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Cell-free translation and purification of Arabidopsis thaliana regulator of G signaling 1 protein

Arabidopsis thaliana Regulator of G protein Signalling 1 (AtRGS1) is a protein with a predicted N-terminal 7-transmembrane (7TM) domain and a C-terminal cytosolic RGS1 box domain. The RGS1 box domain exerts GTPase activation (GAP) activity on Gα (AtGPA1), a component of heterotrimeric G protein signaling in plants. AtRGS1 may perceive an exogenous agonist to regulate the steady-state levels of the active form of AtGPA1. It is uncertain if the full-length AtRGS1 protein exerts any atypical effects on Gα, nor has it been established exactly how AtRGS1 contributes to perception of an extracellular signal and transmits this response to a G-protein dependent signaling cascade. Further studies on full-length AtRGS1 have been inhibited due to the extreme low abundance of the endogenous AtRGS1 protein in plants and lack of a suitable heterologous system to express AtRGS1. Herein, we describe methods to produce full-length AtRGS1 by cell-free synthesis into unilamellar liposomes and nanodiscs. The cell-free synthesized AtRGS1 exhibits GTPase activating activity on Gα and can be purified to a level suitable for biochemical analyses.

58 GEOSCIENCES↗

Traveling wave solutions in a chain of periodically forced coupled nonlinear oscillators

Artificial perceptions of light called phosphenes were motivated by earlier studies. We analyze traveling wave solutions in a chain of periodically forced coupled nonlinear oscillators modeling this phenomenon. We examine the discrete model problem in its co-traveling frame and systematically obtain the corresponding traveling waves in one spatial dimension. Direct numerical simulations as well as linear stability analysis are employed to reveal the parameter regions where the traveling waves are stable, and these waves are, in turn, connected to the standing waves analyzed in earlier work. We also consider a two-dimensional extension of the model and demonstrate the robust evolution and stability of planar fronts. Moreover, our simulations also suggest the radial fronts tend to either annihilate or expand and flatten out, depending on the phase value inside and the parameter regime. Finally, we observe that solutions that initially feature two symmetric fronts with bulged centers evolve in qualitative agreement with experimental observations of phosphenes.

59 BASIC BIOLOGICAL SCIENCES↗

Saddle point approaches in strong field physics and generation of attosecond pulses

Attoscience is the emerging field that accesses the fastest electronic processes occurring at the atomic and molecular length scales with attosecond (1 as = 10 –18 s) time resolution having wide ranging physical, chemical, material science and biological applications. The quintessential and one of the most fundamental processes in this domain is the generation of phase locked XUV attosecond pulses. The theoretical approach to understand the process incorporates a fully quantum or semi classical or relativistic description of coherent charge dynamics in intense ultrashort electromagnetic fields driving a quantum system (an atom, a molecule, solid band gap materials or surface plasmas). Modelling of such physical and dynamical systems in science and also in many other branches often leads to equations represented in terms of complex multi-dimensional integrals. These integrals can often be solved using the stationary phase approximation, which leads to a series of equations identifying the points in the multi-dimensional space, having most significant contributions in their evaluation. These points are usually indicated as saddle points. The description of the dynamics of quantum mechanical or relativistic systems that results from such an approach enables near to classical physics intuitive perceptions of the processes under investigation. Thus, the saddle point methods are very powerful and valuable general theoretical tools to obtain asymptotic expressions of such solutions and help also to gain physical insights on the underlying phenomena. Such techniques developed in the past have been adapted to study the emission of as pulses by different physical systems and have been widely employed in calculating and estimating the response of matter to intense electromagnetic pulses on ultrafast time scales. Here we provide an extensive disposition of the saddle point approaches unifying their ubiquitous applications within the domain of attoscience valid for simple atomic to more complex condensed matter systems undergoing ultrafast dynamics and present current trends and advancements in the field. In this review we would delineate the methodology, present a synthesis of seminal works and describe the state of the art applications. Finally we also address ultrashort time dynamics of novel materials that have gained much attention recently, namely lower dimensional material systems and micro-plasma systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resilience-based Recovery Scheduling of Transportation Network in Mixed Traffic Environment: A Deep-Ensemble-Assisted Active Learning Approach

Devising effective post-hazard recovery strategies is critical in enhancing the resilience of transportation networks (TNs). However, existing work does not consider the multiclass users’ travel behavior in network functionality quantification and the metaheuristic solution procedures often suffer from extensive computational burden due to the exploration need in large solution space and the expensive functionality quantification. Here, this study develops a bilevel decision-making framework for the resilience-based recovery scheduling of the TN in a mixed traffic environment with connected and autonomous vehicles (CAVs) and human-driven vehicles (HDVs). The lower level quantifies the TN's functionality over time considering different travel behavior of CAV and HDV users arisen from their different levels of information perception. The upper level presents a novel deep-ensemble-assisted active learning approach to balance optimization performance and computational cost. This framework can help decision makers better quantify the TN's functionality to support effective recovery scheduling of TN with different mixed traffic scenarios ranging from HDV-only to future CAV-dominant traffic. The optimization approach bears the potential to be extended to solving general large-scale network recovery scheduling problems effectively and efficiently. The proposed methodology is demonstrated using a real-world traffic network in Southern California under earthquake considering deterministic and stochastic repair durations.

42 ENGINEERING↗

Opportunities and attitudes of private forest landowners in supplying woody biomass for renewable energy

Woody biomass has been identified as a source of dispatchable, renewable energy. Private lands supply the majority of the wood-based pellets that is produced in the southeastern United States (SE US) and shipped to countries in the European Union (EU) for energy generation. To assess the perspectives of potential suppliers of woody biomass in the SE US, nonindustrial private forest landowners were surveyed in the fuelsheds of the two primary ports for wood pellets exported to the EU. The survey assessed owners' characteristics, attitudes, and future management plans. Survey results were examined to explore the relationships among these factors and owners' intentions for providing material for wood-based energy. Here, the results indicate that forest landowners have multiple reasons for maintaining their forest land, with more than 40% of the owners ranking timber production as a very important reason. Furthermore, the majority of landowners would be willing to provide woody biomass for producing bioenergy. Among factors that would enhance landowners' willingness to provide woody biomass for energy, technical assistance to improve stand productivity and future value was the most popular options, followed by reducing fire and disease risk, long-term markets, and high prices. Landowner willingness to provide woody material for bioenergy also varied depending on demographics including age and gender, property characteristics including holding size and distance to residence, and perceptions regarding the impact on forest value of wood pellet demand and the viability of bioenergy as an alternative to fossil energy.

09 BIOMASS FUELS↗

Comparative study on the overall energy performance between photovoltaic and Low-E insulated glass units

In this report a novel semi-transparent building integrated photovoltaic (BIPV) laminate was developed and introduced in this paper. It was produced by cutting standard mono-crystalline silicon solar cells into small strips and then making electrical connections between each strip before laminating the cells between two layers of glass. The overall energy performance and energy saving potential of the BIPV insulated glass unit (IGU) under real world conditions were identified through a side by side comparative study. Compared to the reference IGU, the BIPV IGU had lower solar heat gain coefficient (SHGC) but much higher U-factor. The average HVAC electricity saving of the BIPV IGU was about 10% relative to the reference IGU. Daylighting measurement and analysis were carried out to evaluate the trade-offs associated with the BIPV IGU between daylight, glare, and lighting energy use. The results indicated that the BIPV IGU is better than the reference IGU in reducing discomfort glare. However, if the most conservative viewpoint near the window is used for the assessment, a lower transmittance BIPV IGU is required to bring the overall discomfort levels below the perceptible level. Lastly, the net energy saving potential associated with the novel BIPV IGU was identified based on the power, thermal and daylighting performance. On average, the BIPV IGU saved 16.8% of the total electricity use of the room. Further studies and improvement on the energy conversion efficiency of solar cells, the optimal transmittance as well as the thermal properties would make this technology more energy-efficient and affordable.

14 SOLAR ENERGY↗

A Photo-Labile Thioether Linkage to Phycoviolobilin Provides the Foundation for the Blue/Green Photocycles in DXCF-Cyanobacteriochromes

The phytochrome superfamily encompasses a diverse collection of photochromic photoreceptors in plants and microorganisms that employ a covalently linked bilin cradled in a cGMP-phosphodiesterase/adenylyl-cyclase/FhlA (GAF) domain to detect light. Whereas most interconvert between red- and far-red-light-absorbing states, cyanobacteria also express variants called cyanobacteriochromes (CBCRs) that modify bilin absorption to collectively perceive the entire visible spectrum. Here, we present two X-ray crystallographic structures of the GAF domain from the blue/green photochromic CBCR PixJ from Thermosynechococcus elongatus. Moreover, these structures confirm the hypothesis that CBCRs variably manipulate the chromophore π-conjugation system through isomerization and a second thioether linkage, in this case involving the bilin C10 carbon and Cys494 within a DXCF sequence characteristic of blue/green CBCRs. Biochemical studies support a mechanism for photoconversion whereby the second linkage ruptures on route to the green-light-absorbing state. All together, theTePixJ(GAF) models illustrate the remarkable structural and photochemical versatility among phytochromes and CBCRs in driving light perception.

Burgie, E. Sethe↗

Role of CRF1 receptor in post-incisional plasma extravasation and nociceptive responses in mice

The corticotropin-releasing factor (CRF) is involved in a number of physiological functions including pain perception. The purpose of this study was to evaluate the role of CRF1 receptor in the long-lasting post-surgical changes in somatic nociceptive thresholds and in local inflammatory responses, using genetically engineered mice lacking functional CRF1 receptor. Animals underwent a plantar incision under anaesthesia with remifentanil (80 μg/kg s.c.) and sevoflurane. Mechanical thresholds (von Frey) and plasma extravasation (Evan's blue) were evaluated at different time points. On postoperative day 20, mechanical thresholds had returned to baseline in CD1 mice (3.07 ± 6.21%), while B6,129CRH{sup tklee} mice presented significant hyperalgesia, which was similar in wild-type (WT) (− 29.81 ± 8.89%) and CRF1 receptor knockout (KO) (− 37.10 ± 10.75%) mice, showing strain differences. The administration of naloxone (1 mg/kg, s.c.) on postoperative day 21 produced hyperalgesia revealing surgery-induced latent pain sensitization. The extent of hyperalgesia was greater in KO versus WT mice, suggesting a role of CRF1 receptors in the upward modulation of endogenous opioid release. Furthermore, two days after surgery, plasma extravasation returned to baseline in WT mice but remained elevated in KO mice. In non-manipulated B6,129CRH{sup tklee} KO mice we observed an increase in the number of writhes (41.25 ± 11.36) versus WT (23.80 ± 4.71), while in the tail immersion test no differences could be detected. Our results show that CRF/CRF1 receptors seem to be a protective role in latent pain sensitization induced by surgery and in the local inflammatory response to injury. - Highlights: • We have used genetically engineered mice lacking CRF1 receptor to evaluate the role of this receptor in the long-lasting post-surgical changes in nociceptive thresholds and in local inflammatory responses. • Our results suggest a role of CRF/CRF1 receptor in latent pain sensitization induced by surgery and in the inflammatory processes. • The results of the present study may contribute to further understanding the mechanisms implicated in the latent pain sensitization and in the local inflammatory response to tissue injury.

60 APPLIED LIFE SCIENCES↗

Generating multiple benefits from forests by producing value-added products: Lessons from the Pacific Northwestern US

This paper asks what conditions are needed to counteract a declining forest industry. The mobilization of supply chains for new value-added forest products and services can be supported by programs designed to simultaneously achieve multiple goals related to health, climate, and rural economic development. But several challenges are identified that underscore the need to stack benefits and incentives to achieve muti-sectoral goals. Based on a case study in Washington state, we find opportunities and constraints for sourcing forest products are determined by the local and regional conditions such as availability of working forests and their residues, socioeconomic conditions, workforce availability, transportation options, and perceptions about social license of the new industry. Key recommendations are the need for (1) a consistent demand and resilient supply chain for the new product; (2) a stable, supportive policy and assessment framework; (3) timely, transparent, and trusted monitoring and reporting of benefits and costs; (4) fostering engagement and buy-in from stakeholders; (5) a context-specific evaluation of opportunities and constraints; and (6) agreement on the goals of sustainable forestry. A diversity of products and markets builds a more resilient forest-based economy by mitigating impacts of disruptions in any individual market, adding value to biomass, increasing employment, and reducing forest risks to fire, insects, and disease.

Bioenergy↗