Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLLUTANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Estuarine nutrient pollution impact reduction assessment through euphotic zone avoidance/bypass considerations

The feasibility of reducing nutrient pollution impact by redirecting the effluent to depths below the euphotic zone was investigated for the deep estuarine Puget Sound region of the Salish Sea in the Pacific Northwest of America. The hypothesis tested was that the thickness of the outflow layer in deep estuaries may be greater than the euphotic zone depth, allowing a fraction of nutrients to be exported out passively through the layers immediately below. The euphotic zone depth in Puget Sound varies from 8 to 25 m while the depth of the outflow layer can reach up to ≈ 60 m. Outfall relocation strategies were tested on 99% of the anthropogenic nutrient loads currently delivered to Puget Sound. The impact was quantified using the previously established biophysical Salish Sea Model, using gross primary production and exposure to low dissolved oxygen (DO) levels as the metric (< 2 mg/L for hypoxia and < 5 mg/L for impairment). Eliminating nutrient pollution (above natural) from rivers and wastewater reduced hypoxia exposure by 8.1% and 11.2%, respectively. Relocating the outfalls to deeper waters resulted in improvements, but only in the sill-less sub-basins such as Whidbey, where hypoxia and DO impairment exposure decreased (7.9% and 6.8%, respectively). The presence of multiple sills and circulation cells in Puget Sound resulted in increased exposure and rendered nutrient bypass goals unfeasible as originally envisioned. However, an alternate nutrient export pathway was identified through bottom exchange flow out of Puget Sound via Whidbey Basin and Deception Pass. An unexpected reduction in the exchange outflow magnitude (≈ 4%) due additional (22%) freshwater discharged to the estuary bottom was also noted. The potential loss in circulation strength due to rerouting of natural surface freshwater through submerged deep-water outfalls is identified as a new unforeseen anthropogenic impact.

54 ENVIRONMENTAL SCIENCES↗

What Factors Drive Air Pollutants in China? An Analysis from the Perspective of Regional Difference Using a Combined Method of Production Decomposition Analysis and Logarithmic Mean Divisia Index

Air pollution in China attracts the world’s attention, so it is important to study its driving factors for air pollutants. The combined Production Decomposition Analysis and Logarithmic Mean Divisia Index (PDA–LMDI) model is applied to construct a regional contribution index in this study to explore the regional differences in factors affecting sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), and particulate matter with diameter not greater than 2.5 µm (PM 2.5 ) from 2005 to 2015 in China. The regional emission coefficient had a great inhibitory effect, which reduced SO 2 , NO x , and PM 2.5 by 25,364.9, 10,449.3, and 11,295.3 kilotons (kt) from 2005 to 2015, respectively. For this inhibitory effect, the degree to emission reduction was great for North and East China, followed by South and Central China, and small for Southwest. Northwest. and Northeast China. The regional technical efficiency, technology improvement, capital-energy substitution and labor-energy substitution effects each reduced SO 2 , NO x , and PM 2.5 by about 3500, 3100, and 1500 kt from 2005 to 2015, respectively. For the regional technical efficiency and technology improvement effects, the degree to emission reduction was great in East and Central China, and small in South Northwest and Northeast China. For the regional capital- and labor-energy substitution effects, the degree of emission reduction was great for North East and Central China, and small for Northwest and South China. The regional output proportion effect increased SO 2 , NO x , and PM 2.5 by 1211.2, 320.1, and 277.8 kt from 2005 to 2015, respectively. The national economic growth had a relatively great promoting effect and increased SO 2 , NO x , and PM 2.5 by 26,445.5, 23,827.5, and 11,925.5 kt from 2005 to 2015, respectively. Each region should formulate relevant policies and measures for emission reduction according to local conditions.

54 ENVIRONMENTAL SCIENCES↗

Study Pollution Impacts on Upper-Tropospheric Clouds with Aura, CloudSat, and CALIPSO Data

This viewgraph presentation reviews the impact of pollution on clouds in the Upper Troposphere. Using the data from the Aura Microwave Limb Sounder (MLS), CloudSat, CALIPSO the presentation shows signatures of pollution impacts on clouds in the upper troposphere. The presentation demonstrates the complementary sensitivities of MLS , CloudSat and CALIPSO to upper tropospheric clouds. It also calls for careful analysis required to sort out microphysical changes from dynamical changes.

radar↗

The Efficacy of Air Pollution Control Efforts: Evidence from AURA

Observations of NO2, SO2, and H2CO from OMI on AURA provide an excellent record of pollutant concentrations for the past decade. Abatement strategies to control criteria pollutants including ozone and fine particulate matter (PM2.5) have met with varying degrees of success. Sulfur controls had a profound impact on local SO2 concentrations and a measurable impact on PM2.5. Although substantial effort has gone into VOC control, ozone in the eastern US has responded dramatically to NOx emissions controls.

efficacy of air pollution↗

A Panchromatic Imaging Fourier Transform Spectrometer for the NASA Geostationary Coastal and Air Pollution Events Mission

This paper summarizes the design and development of the Panchromatic Imaging Fourier Transform Spectrometer (PanFTS) for the NASA Geostationary Coastal and Air Pollution Events (GEO-CAPE) Mission. The PanFTS instrument will advance the understanding of the global climate and atmospheric chemistry by measuring spectrally resolved outgoing thermal and reflected solar radiation. With continuous spectral coverage from the near-ultraviolet through the thermal infrared, this instrument is designed to measure pollutants, greenhouse gases, and aerosols as called for by the U.S. National Research Council Decadal Survey; Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond1. The PanFTS instrument is a hybrid instrument based on spectrometers like the Tropospheric Emissions Spectrometer (TES) that measures thermal emission, and those like the Orbiting Carbon Observatory (OCO), and the Ozone Monitoring Instrument (OMI) that measure scattered solar radiation. Simultaneous measurements over the broad spectral range from IR to UV is accomplished by a two sided interferometer with separate optical trains and detectors for the ultraviolet-visible and infrared spectral domains. This allows each side of the instrument to be independently optimized for its respective spectral domain. The overall interferometer design is compact because the two sides share a single high precision cryogenic optical path difference mechanism (OPDM) and metrology laser as well as a number of other instrument systems including the line-of-sight pointing mirror, the data management system, thermal control system, electrical system, and the mechanical structure. The PanFTS breadboard instrument has been tested in the laboratory and demonstrated the basic functionality for simultaneous measurements in the visible and infrared. It is set to begin operations in the field at the California Laboratory for Atmospheric Remote Sensing (CLARS) observatory on Mt. Wilson measuring the atmospheric chemistry across the Los Angeles basin. Development has begun on a flight size PanFTS engineering model (EM) that addresses all critical scaling issues and demonstrates operation over the full spectral range of the flight instrument which will show the PanFTS instrument design is mature.

Imaging spectrometer(↗

Improved Estimates of Air Pollutant Emissions from Biorefinery

We have attempted to use detailed kinetic modeling approach for improved estimation of combustion air pollutant emissions from biorefinery. We have developed a preliminary detailed reaction mechanism for biomass combustion. Lignin is the only biomass component included in the current mechanism and methane is used as the biogas surrogate. The model is capable of predicting the combustion emissions of greenhouse gases (CO2, N2O, CH4) and criteria air pollutants (NO, NO2, CO). The results are yet to be compared with the experimental data. The current model is still in its early stages of development. Given the acknowledged complexity of biomass oxidation, as well as the components in the feed to the combustor, obviously the modeling approach and the chemistry set discussed here may undergo revision, extension, and further validation in the future.

09 BIOMASS FUELS↗

Co-Firing Oil Shale with Coal and Other Fuels for Improved Efficiency and Multi-Pollutant Control

Oil shale is an abundant, undeveloped natural resource which has natural sorbent properties, and its ash has natural cementitious properties. Oil shale may be blended with coal, biomass, municipal wastes, waste tires, or other waste feedstock materials to provide the joint benefit of adding energy content while adsorbing and removing sulfur, halides, and volatile metal pollutants, and while also reducing nitrogen oxide pollutants. Oil shale depolymerization-pyrolysis-devolatilization and sorption scoping studies indicate oil shale particle sorption rates and sorption capacity can be comparable to limestone sorbents for capture of SO2 and SO3. Additionally, kerogen released from the shale was shown to have the potential to reduce NOx emissions through the well established “reburning” chemistry similar to natural gas, fuel oil, and micronized coal. Productive mercury adsorption is also possible by the oil shale particles as a result of residual fixed-carbon and other observed mercury capture sorbent properties. Sorption properties were found to be a function particle heating rate, peak particle temperature, residence time, and gas-phase stoichmetry. High surface area sorbents with high calcium reactivity and with some adsorbent fixed/activated carbon can be produced in the corresponding reaction zones that exist in a standard pulverized-coal or in a fluidized-bed combustor.

01 COAL, LIGNITE, AND PEAT↗

Integrating Human Indoor Air Pollutant Exposure within Life Cycle Impact Assessment

Neglecting health effects from indoor pollutant emissions and exposure, as currently done in Life Cycle Assessment (LCA), may result in product or process optimizations at the expense of workers? or consumers? health. To close this gap, methods for considering indoor exposure to chemicals are needed to complement the methods for outdoor human exposure assessment already in use. This paper summarizes the work of an international expert group on the integration of human indoor and outdoor exposure in LCA, within the UNEP/SETAC Life Cycle Initiative. A new methodological framework is proposed for a general procedure to include human-health effects from indoor exposure in LCA. Exposure models from occupational hygiene and household indoor air quality studies and practices are critically reviewed and recommendations are provided on the appropriateness of various model alternatives in the context of LCA. A single-compartment box model is recommended for use as a default in LCA, enabling one to screen occupational and household exposures consistent with the existing models to assess outdoor emission in a multimedia environment. An initial set of model parameter values was collected. The comparison between indoor and outdoor human exposure per unit of emission shows that for many pollutants, intake per unit of indoor emission may be several orders of magnitude higher than for outdoor emissions. It is concluded that indoor exposure should be routinely addressed within LCA.

54 ENVIRONMENTAL SCIENCES↗

Substantial Contribution of Anthropogenic Air Pollution to Catastrophic Floods in Southwest China

Extreme events such as heat waves, floods, and droughts, have become more frequent since the 1950s1-2. This is likely caused through changes in greenhouse gases and aerosols that perturb the radiative balance and alter cloud processes3-8. On 8-9 July, 2013 a catastrophic flood devastated several metropolitan areas at the foothills of the Sichuan Basin. Using a high-resolution coupled atmosphere-chemistry model, we show that this disaster was not entirely natural. Ensemble simulations robustly show that the severe anthropogenic pollution in the Sichuan Basin significantly enhanced rainfall intensity over the mountainous area northwest of the basin. The heavy air pollution (mainly black carbon) absorbs solar radiation in the lower atmosphere at the expense of surface cooling, which stabilizes the atmosphere and suppresses convection and precipitation over the basin. The enhanced moisture and moist static energy over the basin are then transported by the prevailing winds towards the mountains during daytime. As the excessive moist air that reaches the foothills at night is orographically lifted, very strong convection develops and produces extremely heavy precipitation. Reducing black carbon (BC) emissions in the basin can effectively mitigate the extreme precipitation in the mountains. Unfortunately, BC emissions have been increasing in many developing countries including China9, making them more vulnerable to enhanced disasters as reported here.

Environmental Molecular Sciences Laboratory↗

Shift of daily rainfall peaks over the Beijing–Tianjin–Hebei region: An indication of pollutant effects?

Aerosol impacts on diurnal variations of rainfall over the Beijing–Tianjin–Hebei region are investigated by comparing the observations between polluted and clean days in early summer (June 1 to July 20) before the rainy season begins. The 2002–2012 hourly rainfall measurements in conjunction with environmental data reveal that during high‐pollution days the peak of heavy rainfall shifted ~4 hr earlier while the peak of light rainfall delayed by 2–3 hr. Detailed analyses of meteorological conditions associated with the shifts suggest that the former is mainly caused by enhanced lower‐level aerosol heating during the daytime which increases the lower‐troposphere instability and facilitates the convective rainfall occurrence, and the latter is related to decreases of conversion of cloud droplets into raindrops associated with aerosol increases. Nevertheless, conducting model sensitivity simulations to better understand aerosol–cloud microphysics–precipitation interactions is warranted.

Zhou, Siyuan↗

Diverse Bacterial Groups Contribute to the Alkane Degradation Potential of Chronically Polluted Subantarctic Coastal Sediments

We aimed to gain insight into the alkane degradation potential of microbial communities from chronically polluted sediments of a subantarctic coastal environment using a combination of metagenomic approaches. A total of 6178 sequences annotated as alkane-1-monooxygenases (EC 1.14.15.3) were retrieved from a shotgun metagenomic dataset that included two sites analyzed in triplicate. The majority of the sequences binned with AlkB described in Bacteroidetes (32 ± 13 %) or Proteobacteria (29 ± 7 %), although a large proportion remained unclassified at the phylum level. Operational taxonomic unit (OTU)-based analyses showed small differences in AlkB distribution among samples that could be correlated with alkane concentrations, as well as with site-specific variations in pH and salinity. A number of low-abundance OTUs, mostly affiliated with Actinobacterial sequences, were found to be only present in the most contaminated samples. On the other hand, the molecular screening of a large-insert metagenomic library of intertidal sediments from one of the sampling sites identified two genomic fragments containing novel alkB gene sequences, as well as various contiguous genes related to lipid metabolism. Both genomic fragments were affiliated with the phylum Planctomycetes, and one could be further assigned to the genus Rhodopirellula due to the presence of a partial sequence of the 23S ribosomal RNA (rRNA) gene. This work highlights the diversity of bacterial groups contributing to the alkane degradation potential and reveals patterns of functional diversity in relation with environmental stressors in a chronically polluted, high-latitude coastal environment. In addition, alkane biodegradation genes are described for the first time in members of Planctomycetes.

59 BASIC BIOLOGICAL SCIENCES↗

Self-cleaning and de-pollution efficacies of photocatalytic architectural membranes

Photocatalytic self-cleaning “cool” roofs and walls can maintain high albedos, saving building cooling energy, reducing peak power demand, and mitigating the urban heat island effect. Other environmental benefits result from their de-polluting properties. Specimens from two different photocatalytic architectural membranes and a non-photocatalytic control were exposed alongside vertically, facing west, for two years at three California sites, and retrieved quarterly for testing. Photocatalytic materials showed excellent self-cleaning performance, retaining albedos of 0.74 – 0.75. By contrast, the control material exhibited an albedo loss of up to 0.10, with appreciable soiling observed by scanning electron microscopy. De-pollution capacity was assessed by quantifying NO removal and NOx deposition rates at 60 °C. Furthermore, efficacy varied with exposure location, weather conditions, and the nature of the photocatalytic material. Seasonal effects were observed, with partial inhibition during the dry season and reactivation during the rainy season.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Independent and interactive effects of wet bulb globe temperature and air pollution exposures on suicide mortality

Background: Individual components of the ambient environment, such as temperature and air pollution, exist as part of a complex mixture and have been associated with suicide; however, their interactive effects remain poorly understood. This study examined the independent and interactive effects of wet bulb globe temperature (WBGT), nitrogen dioxide (NO 2 ), and fine particulate matter (PM 2.5 ) on suicide mortality. Methods: We identified 7,551 suicide cases in Utah, USA, from 2000 to 2016 and assigned exposure to daily maximum WBGT (sourced from the European Center for Medium-Range Weather Forecasts) and PM 2.5 and NO 2 concentrations (sourced from a national spatiotemporal ensemble model) using decedent’s residential address at the time of death. A case-crossover design with conditional logistic regression was used to estimate the independent and interactive effects of WBGT max , PM 2.5 , and NO 2 on suicide. For exposure windows, we considered single days preceding suicide (lag 0 to 6) and their averages across preceding days (lag 0–1, 0–3, and 0–6). Analyses were stratified by season. Results: We identified a significant association between WBGT max and suicide across all seasons (odds ratio [OR] = 1.05, 95% confidence interval [CI]: 1.01, 1.10; per 5 °C increase on lag 0–3 days). The associations were stronger in the warm season (March 22 to September 21), with ORs and 95% CIs ranging from 1.08 (1.02, 1.15) to 1.20 (1.10, 1.30) per 5 °C increase depending on the lag periods. We observed synergistic interactions between WBGT max and PM 2.5 and NO 2 in the warm season, associated with higher odds of suicide. The associations of WBGT max with suicide were most pronounced at high NO 2 levels. Conclusions: We found evidence of synergistic interactions between WBGT max and PM 2.5 and NO 2 on suicide in the warm season, emphasizing the need for considering the combined effects of heat stress and air pollution in suicide prevention strategies.

Fine particulate matter↗

Evaluation of regional transport of PM2.5 during severe atmospheric pollution episodes in the western Yangtze River Delta, China

During winter 2018, the 16 prefecture-level cities in Anhui Province, Western Yangtze River Delta region, China had very high PM2.5 concentrations and prolonged pollution days. The impact of regional transport in the formation, accumulation, as well as dispersion of fine particulate matter (PM2.5) in Anhui Province was very significant. This study quantified and analyzed the vertical transport of PM2.5 in three major cities (Hefei, Fuyang, and Suzhou) of Anhui Province in January and July 2018 using the Weather Research and Forecasting (WRF) model coupled with the Community Multiscale Air Quality (CMAQ) model. The results of the inter-regional transport of PM2.5 revealed the dominant transport pathways for the three cities. The flux mainly flowed into Fuyang from Henan (2.23 and 1.42 kt/day in January and July, respectively) and Bozhou (1.96 and 1.21 kt/day in January and July, respectively), while the main flux from Fuyang flowed into Henan (-2.15 kt/day) and Lu'an (-1.91 kt/day) in January and Henan (-0.34 kt/day) and Bozhou (-0.29 kt/day) in July. In addition, the dominant transport pathways and the heights at which they occurred were identified: the northwest-southeast and northeast-south pathways in both winter and summer at both lower (?300 m) and higher (=300 m) levels for Fuyang; the northwest-south and northeast-southwest pathways in winter (at both lower and upper levels) and northwest-east and northeast-southwest pathways in summer at lower and upper levels for Hefei; and the northwest-southeast and northeast-south pathways in both winter (from 50 m up to the top level) and summer (between 100 and 300 m) for Suzhou. Furthermore, the intensities of daily PM2.5 transport fluxes in Fuyang during the atmospheric pollution episode (APE1) were stronger than the monthly average. These results show that joint emission controls across multiple cities along the identified pathways are urgently needed to reduce winter episodes.

Sulaymon, Ishaq D.↗

Applications of Cu{sub 2}O octahedral particles on ITO glass in photocatalytic degradation of dye pollutants under a halogen tungsten lamp

Graphical abstract: - Highlights: • Photocatalytic activity of Cu{sub 2}O octahedral microcrystals on ITO glass was studied. • They showed high abilities in degradation of methylene blue in the presence of H{sub 2}O{sub 2}. • H{sub 2}O{sub 2} amount could affect the degradation efficiency. • Such particles could be easily recycled and still kept high activity. • Many dye pollutants and their mixtures could be efficiently degraded. - Abstract: Cu{sub 2}O octahedral microcrystals were prepared on the ITO glass by galvanostatic electrodeposition in CuSO{sub 4} solution with poly(vinylpryrrolidone) as the surfactant. By controlling the electrodeposition time, the microcrystals could be randomly distributed on the ITO glass and separated from each other, resulting in as many as possible (1 1 1) crystalline planes were exposed. Such microcrystals immobilized on ITO glass were employed in photodegradation of dye pollutants in the presence of H{sub 2}O{sub 2} under a 150 W halogen tungsten lamp. The photodegradation of methylene blue was taken as an example to evaluate the photocatalytic activities of the octahedral Cu{sub 2}O microcrystals. Effects of electrodeposition time and H{sub 2}O{sub 2} amount on the degradation efficiency was discussed, giving the optimum conditions and the corresponding degradation mechanism. The catalyst showed high ability in degradation of methylene blue, methyl orange, rhodamine B, eosin B and their mixtures under identical conditions.

36 MATERIALS SCIENCE↗

Health co-benefits from air pollution and mitigation costs of the Paris Agreement: a modelling study

While the co-benefits from addressing both climate change and air pollution related problems have been clearly recognized, there is not much evidence comparing the mitigation costs and economic benefits of air pollution reduction for alternative scenarios to reduce greenhouse gases. This study analyses the extent to which the health co-benefits would compensate the mitigation cost of achieving the targets of Paris Agreement (2ºC and 1·5ºC) under different scenarios where the emissions abatement effort is shared between countries according to three established equity criteria.

54 ENVIRONMENTAL SCIENCES↗

Integrated Modeling of U.S. Agricultural Soil Emissions of Reactive Nitrogen and Associated Impacts on Air Pollution, Health, and Climate

Agricultural soils are leading sources of reactive nitrogen (Nr) species including nitrogen oxides (NO x ), ammonia (NH 3 ), and nitrous oxide (N 2 O). Here, the propensity of NO x and NH 3 to generate ozone and fine particulate matter (PM) and associated impacts on health are highly variable, whereas the climate impacts of long-lived N 2 O are independent of emission timing and location. However, these impacts have rarely been compared on a spatially-resolved, monetized basis. In this study, we update the nitrogen scheme in an agroecosystem model to simulate the agricultural emissions of Nr from across the United States. We then apply a reduced-form air pollution health effects model to assess air quality impacts from NO x and NH 3 and a social cost of N 2 O to assess the climate impacts. Assuming an $\$$8.2 million Value of a Statistical Life (VSL) and a $\$$13,100/ton social cost of N 2 O, the air quality impacts are a factor of ~7 to 15 times as large as the climate impacts in heavily populated coastal regions, whereas the ratios are closer to 2.5 in sparsely populated regions. Our results show that air pollution, health, and climate should be considered jointly in future assessments of how farming practices affect Nr emissions.

54 ENVIRONMENTAL SCIENCES↗

Molecular Imaging Reveals Two Distinct Mixing States of PM 2.5 Particles Sampled in a Typical Beijing Winter Pollution Case

Mixing states of aerosol particles are crucial for understanding the role of aerosols in influencing air quality and climate. However, a fundamental understanding of the complex mixing states is still lacking because most traditional analysis techniques only reveal bulk chemical and physical properties with limited surface and 3-D information. In this research, 3-D molecular imaging enabled by ToF-SIMS was used to elucidate the mixing states of PM 2.5 samples obtained from a typical Beijing winter haze event. In light pollution cases, a thin organic layer covers separated inorganic particles, while in serious pollution cases, ion exchange and an organic-inorganic mixing surface on large-area particles were observed. Finally, the new results provide key 3-D molecular information of mixing states, which is highly desirable for reducing uncertainty and bias in representing aerosol-cloud interactions in current Earth System Models, and improving the understanding of aerosols on air quality and human health.

3-D molecular imaging↗