Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Synthesis, Crystal and Electronic Structures of the Pnictides AE 3 TrPn 3 (AE = Sr, Ba; Tr = Al, Ga; Pn = P, As)

New ternary arsenides AE 3 TrAs 3 (AE = Sr, Ba; Tr = Al, Ga) and their phosphide analogs Sr 3 GaP 3 and Ba 3 AlP 3 have been prepared by reactions of the respective elements at high temperatures. Single-crystal X-ray diffraction studies reveal that Sr 3 AlAs 3 and Ba 3 AlAs 3 adopt the Ba 3 AlSb 3 -type structure (Pearson symbol oC56, space group Cmce, Z = 8). This structure is also realized for Sr 3 GaP 3 and Ba 3 AlP 3 . Likewise, the compounds Sr 3 GaAs 3 and Ba 3 GaAs 3 crystallize with the Ba 3 GaSb 3 -type structure (Pearson symbol oP56, space group Pnma, Z = 8). Both structures are made up of isolated pairs of edge-shared AlPn 4 and GaPn 4 tetrahedra (Pn = pnictogen, i.e., P or As), separated by the alkaline-earth Sr 2+ and Ba 2+ cations. In both cases, there are no homoatomic bonds, hence, regardless of the slightly different atomic arrangements, both structures can be rationalized as valence-precise [AE 2+ ] 3 [Tr 3+ ][Pn 3- ] 3 , or rather [AE 2+ ] 6 [Tr 2 Pn 6 ] 12- , i.e., as Zintl phases.

36 MATERIALS SCIENCE↗

Miniature MMIC Low Mass/Power Radiometer Modules for the 180 GHz GeoSTAR Array

We have developed and demonstrated miniature 180 GHz Monolithic Microwave Integrated Circuit (MMIC) radiometer modules that have low noise temperature, low mass and low power consumption. These modules will enable the Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR) of the Precipitation and All-weather Temperature and Humidity (PATH) Mission for atmospheric temperature and humidity profiling. The GeoSTAR instrument has an array of hundreds of receivers. Technology that was developed included Indium Phosphide (InP) MMIC Low Noise Amplifiers (LNAs) and second harmonic MMIC mixers and I-Q mixers, surface mount Multi-Chip Module (MCM) packages at 180 GHz, and interferometric array at 180 GHz. A complete MMIC chip set for the 180 GHz receiver modules (LNAs and I-Q Second harmonic mixer) was developed. The MMIC LNAs had more than 50% lower noise temperature (NT=300K) than previous state-of-art and MMIC I-Q mixers demonstrated low LO power (3 dBm). Two lots of MMIC wafers were processed with very high DC transconductance of up to 2800 mS/mm for the 35 nm gate length devices. Based on these MMICs a 180 GHz Multichip Module was developed that had a factor of 100 lower mass/volume (16x18x4.5 mm3, 3g) than previous generation 180 GHz receivers.

Monolithic Microwave Integrated Circuit (MMIC)↗

A 220-GHz InP HEMT Direct Detection Polarimeter

In this article, a 220-GHz direct detection polarimetric receiver is reported. This polarimetric receiver is intended for sensing of the microphysical properties of cloud ice in the earth's upper atmosphere. In the article, we report the measured RF performance, including RF gain of approximately 35 dB per channel and integrated noise figure of the receiver. The noise figure is measured to be 5.1 dB for the horizontally polarized channel and 5.4 dB for the vertically polarized channel. The receiver measures only 1.8 cm × 3.0 cm × 6.4 cm and has a total regulated dc power consumption of 520 mW. This article represents the first 220-GHz polarimetric direct detection receiver and is enabled by an advanced 25-nm indium phosphide (InP) HEMT monolithic microwave integrated circuit (MMIC) technology.

Indium phosphide (InP)↗

Bandgap Engineering of InP QDs Through Shell Thickness and Composition

Fields as diverse as biological imaging and telecommunications utilize the unique photophysical and electronic properties of nanocrystal quantum dots (NQDs). The development of new NQD compositions promises material properties optimized for specific applications, while addressing material toxicity. Indium phosphide (InP) offers a 'green' alternative to the traditional cadmium-based NQDs, but suffers from extreme susceptibility to oxidation. Coating InP cores with more stable shell materials significantly improves nanocrystal resistance to oxidation and photostability. We have investigated several new InP-based core-shell compositions, correlating our results with theoretical predictions of their optical and electronic properties. Specifically, we can tailor the InP core-shell QDs to a type-I, quasi-type-II, or type-II bandgap structure with emission wavelengths ranging from 500-1300 nm depending on the shell material used (ZnS, ZnSe, CdS, or CdSe) and the thickness of the shell. Single molecule microscopy assessments of photobleaching and blinking are used to correlate NQD properties with shell thickness.

36 MATERIALS SCIENCE↗

Urchin-like Co{sub 2}P nanocrystals: Synthesis, characterization, influencing factors and photocatalytic degradation property

In this paper, cobalt phosphides (Co{sub 2}P) nanocrystals with urchin-like structures have been successfully synthesized via a water-ethanol mixed-solvothermal route, employing white phosphorus (WP) and cobalt dichloride as starting reactants, sodium acetate as the pH adjustor, and sodium dodecyl benzene sulfonate (SDBS) as the surfactant. The as-obtained product was characterized by X-ray powder diffraction (XRD), energy dispersive spectrometry (EDS), (high resolution) transmission electron microscopy (TEM/HRTEM), selected area electron diffraction (SAED) and field emission scanning electron microscopy (FESEM). It was found that sodium acetate played an important role in the formation of Co{sub 2}P nanocrystals with urchin-like structures. Some factors influencing the morphology of the product, including the reaction temperature, time, amounts of WP and SDBS and so on, were investigated. The photocatalytic property of the product for the degradation of organic dyes was studied. A possible formation mechanism of urchin-like Co{sub 2}P nanocrystals was suggested based on the experiment results.

36 MATERIALS SCIENCE↗

Theoretical Studies in Heterogenous Catalysis: Towards a Rational Design of Novel Catalysts for Hydrodesulfurization and Hydrogen Production

Traditionally, knowledge in heterogeneous catalysis has come through empirical research. Nowadays, there is a clear interest to change this since millions of dollars in products are generated every year in the chemical and petrochemical industries through catalytic processes. To obtain a fundamental knowledge of the factors that determine the activity of heterogeneous catalysts is a challenge for modern science since many of these systems are very complex in nature. In principle, when a molecule adsorbs on the surface of a heterogeneous catalyst, it can interact with a large number of bonding sites. It is known that the chemical properties of these bonding sites depend strongly on the chemical environment around them. Thus, there can be big variations in chemical reactivity when going from one region to another in the surface of a heterogeneous catalyst. A main objective is to understand how the structural and electronic properties of a surface affect the energetics for adsorption processes and the paths for dissociation and chemical reactions. In recent years, advances in instrumentation and experimental procedures have allowed a large series of detailed works on the surface chemistry of heterogeneous catalysts. In many cases, these experimental studies have shown interesting and unique phenomena. Theory is needed to unravel the basic interactions behind these phenomena and to provide a general framework for the interpretation of experimental results. Ideally, theoretical calculations based on density-functional theory have evolved to the point that one should be able to predict patterns in the activity of catalytic surfaces. As in the case of experimental techniques, no single theoretical approach is able to address the large diversity of phenomena occurring on a catalyst. Catalytic surfaces are usually modeled using either a finite cluster or a two-dimensionally periodic slab. Many articles have been published comparing the results of these two approaches. An important advantage of the cluster approach is that one can use the whole spectrum of quantum-chemical methods developed for small molecules with relatively minor modifications. On the other hand, the numerical effort involved in cluster calculations increases rather quickly with the size of the cluster. This problem does not exist when using slab models. Due to the explicit incorporation of the periodicity of the crystal lattice through the Bloch theorem, the actual dimension of a slab calculation depends only on the size of the unit cell. In practical terms, the slab approach is mainly useful for investigating the behavior of adsorbates at medium and high coverages. Very large unit cells are required at the limit of low to zero coverage, or when examining the properties and chemical behavior of isolated defect sites in a surface. In these cases, from a computational viewpoint, the cluster approach can be much more cost effective than the slab approach. Slab and cluster calculations can be performed at different levels of sophistication: semi-empirical methods, simple ab initio Hartree-Fock, ab initio post-Hartree-Fock (CI, MP2, etc), and density functional theory. Density-functional (DF) based calculations frequently give adsorption geometries with a high degree of accuracy and predict reliable trends for the energetics of adsorption reactions. This article provides a review of recent theoretical studies that deal with the behavior of novel catalysts used for hydrodesulfurization (HDS) reactions and the production of hydrogen (i.e. catalytic processes employed in the generation of clean fuels). These studies involve a strong coupling of theory and experiment. A significant fraction of the review is focused on the importance of size-effects and correlations between the electronic and chemical properties of catalytic materials. The article begins with a discussion of results for the desulfurization of thiophene on metal carbides and phosphides, systems which have the potential to become the next generation of industrial HDS catalysts. Then, systematic studies concerned with the hydrogen-evolution reaction (HER) on extended surfaces, organometallic complexes and enzymes are presented. Finally, the reasons for the high catalytic activity of Au-CeO{sub 2} and Cu-CeO{sub 2} in the production of hydrogen through the water-gas shift reaction (CO + H{sub 2}O {yields} H{sub 2} + CO{sub 2}) are analyzed. It is shown that theoretical methods are very valuable tools for helping in the rational design of heterogeneous catalysts.

02 PETROLEUM↗

Topological change of the Fermi surface in ternary iron-pnictides with reduced c/a ratio: A dHvA study of CaFe2P2

We report a de Haas-van Alphen effect study of the Fermi surface of CaFe{sub 2}P{sub 2} using low temperature torque magnetometry up to 45 T. This system is a close structural analogue of the collapsed tetragonal non-magnetic phase of CaFe{sub 2}As{sub 2}. We find the Fermi surface of CaFe{sub 2}P{sub 2} to differ from other related ternary phosphides in that its topology is highly dispersive in the c-axis, being three-dimensional in character and with identical mass enhancement on both electron and hole pockets ({approx} 1.5). The dramatic change in topology of the Fermi surface suggests that in a state with reduced (c/a) ratio, when bonding between pnictogen layers becomes important, the Fermi surface sheets are unlikely to be nested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

London Penetration Depth and Superfluid Density of Single-crystalline Fe1+y(Te1−xSex)and Fe1+y(Te1−xSx)

The in-plane London penetration depth, {lambda}(T), was measured in single crystals of the iron-chalcogenide superconductors Fe{sub 1.03}(Te{sub 0.63}Se{sub 0.37}) and Fe{sub 1.06}(Te{sub 0.88}S{sub 0.14}) by using a radio-frequency tunnel diode resonator. Similar to the iron-arsenides and in stark contrast to the iron-phosphides, iron-chalcogenides exhibit a nearly quadratic temperature variation of {lambda}(T) at low temperatures. The absolute value of the penetration depth in the T {yields} 0 limit was determined for Fe{sub 1.03}(Te{sub 0.63}Se{sub 0.37}) by using an Al coating technique, giving {lambda}(0) {approx} 560 {+-} 20 nm. The superfluid density {rho}{sub s}(T) = {lambda}{sup 2}(0)/{lambda}{sup 2}(T) was fitted with a self-consistent two-gap {gamma} model. While two different gaps are needed to describe the full-range temperature variation in {rho}s(T), a nonexponential low-temperature behavior requires pair-breaking scattering, and therefore an unconventional (e.g., s or nodal) order parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Well‐Dispersed Nickel‐ and Zinc‐Tailored Electronic Structure of a Transition Metal Oxide for Highly Active Alkaline Hydrogen Evolution Reaction

Abstract The practical scale‐up of renewable energy technologies will require catalysts that are more efficient and durable than present ones. This is, however, a formidable challenge that will demand a new capability to tailor the electronic structure. Here, an original electronic structure tailoring of CoO by Ni and Zn dual doping is reported. This changes it from an inert material into one that is highly active for the hydrogen evolution reaction (HER). Based on combined density functional theory calculations and cutting‐edge characterizations, it is shown that dual Ni and Zn doping is responsible for a highly significant increase in HER activity of the host oxide. That is, the Ni dopants cluster around surface oxygen vacancy of the host oxide and provide an ideal electronic surface structure for hydrogen intermediate binding, while the Zn dopants distribute inside the host oxide and modulate the bulk electronic structure to boost electrical conduction. As a result, the dual‐doped Ni, Zn CoO nanorods achieve current densities of 10 and 20 mA cm −2 at overpotentials of, respectively, 53 and 79 mV. This outperforms reported state‐of‐the‐art metal oxide, metal oxide/metal, metal sulfide, and metal phosphide catalysts.

Ling, Tao↗

Design and Fabrication of a Precious Metal‐Free Tandem Core–Shell p + n Si/W‐Doped BiVO 4 Photoanode for Unassisted Water Splitting

Abstract Tandem photoelectrochemical water splitting cells utilizing crystalline Si and metal oxide photoabsorbers are promising for low‐cost solar hydrogen production. This study presents a device design and a scalable fabrication scheme for a tandem heterostructure photoanode: p + n black silicon (Si)/SnO 2 interface/W‐doped bismuth vanadate (BiVO 4 )/cobalt phosphate (CoPi) catalyst. The black‐Si not only provides a substantial photovoltage of 550 mV, but it also serves as a conductive scaffold to decrease charge transport pathlengths within the W‐doped BiVO 4 shell. When coupled with cobalt phosphide (CoP) nanoparticles as hydrogen evolution catalysts, the device demonstrates spontaneous water splitting without employing any precious metals, achieving an average solar‐to‐hydrogen efficiency of 0.45% over the course of an hour at pH 7. This fabrication scheme offers the modularity to optimize individual cell components, e.g., Si nanowire dimensions and metal oxide film thickness, involving steps that are compatible with fabricating monolithic devices. This design is general in nature and can be readily adapted to novel, higher performance semiconducting materials beyond BiVO 4 as they become available, which will accelerate the process of device realization.

Chakthranont, Pongkarn↗

Enhancing Cycle Life in Superoxide‐Based Na–O 2 Batteries by Reducing Interface Reactivity

Abstract Sodium–oxygen (Na–O 2 ) batteries are considered a promising energy storage alternative to current state‐of‐the‐art technologies owing to their high theoretical energy density, along with the natural abundance and low price of Na metal. The chemistry of these batteries depends on sodium superoxide (NaO 2 ) or peroxide (Na 2 O 2 ) being formed/decomposed. Most Na–O 2 batteries form NaO 2 , but reversibility is usually quite limited due to side reactions at interfaces. By using new materials, including a highly active catalyst based on vanadium phosphide (VP) nanoparticles, an ether/ionic liquid‐based electrolyte, and an effective sodium bromide (NaBr) anode protection layer, the sources of interface reactivity can be reduced to achieve a Na–O 2 battery cell that is rechargeable for 1070 cycles with a high energy efficiency of more than 83%. Density functional theory calculations, along with experimental characterization confirm the three factors leading to the long cycle life, including the effectiveness of the NaBr protective layer on the anode, a tetraglyme/EMIM‐BF 4 based electrolyte that prevents oxidation of the VP cathode catalyst surface, and the EMIM‐BF 4 ionic liquid aiding in avoiding electrolyte decomposition on NaO 2 .

Azaribeni, Adel [Department of Chemical and Biolog↗

Charged metallopolymers as universal precursors for versatile cobalt materials

Here, inorganic metal-based materials have been widely utilized in catalytic chemistry, life sciences, and engineering. [1] Cobalt-related materials, including metallic cobalt, [2] cobalt oxide, [3] cobalt alloy, [4] and cobalt phosphide, [5] have been used in magnetic materials, aerospace engineering, and energy storage. With the development of modern nanoelectronic technology and the increasing demand for nanostructured materials, [6] the preparation of nanostructured inorganic cobalt-containing materials has become a crucial technological challenge.

36 MATERIALS SCIENCE↗

Sulfidation and selenidation of nickel nanoparticles

Abstract Transition metal chalcogenide nanoparticles (NPs) are of interest for energy applications, including batteries, supercapacitors, and electrocatalysis. Many methods have been established for synthesizing Ni NPs, and conversion chemistry to form Ni oxide and phosphides from template Ni NPs is well‐understood. Sulfidation and selenidation of Ni NPs have been much less explored, however. We report a method for the conversion of Ni template NPs into sulfide and selenide product NPs using elemental sulfur, 1‐hexadecanthiol, thiourea, trioctylphosphine sulfide, elemental selenium, and selenourea. While maintaining mole ratios of 2 mmol sulfur/selenium precursor: mmol Ni, products with phases of Ni 3 S 2 , Ni 9 S 8 , NiS, NiSO 4 ·6H 2 O, Ni 3 S 4 , Ni 3 Se 2 , and NiSe have been obtained. The products have voids that form through the Kirkendall effect during interdiffusion. Trends relating the chemical properties of the precursors to the phases of the products have been identified. While some precursors contained phosphorus, there was no significant incorporation of phosphorus in any of the products. An increase of the NP size during sulfidation and selenidation is consistent with ripening. The application of Ni sulfide and selenide NPs as electrocatalysts for the hydrogen evolution reaction is also demonstrated.

Lynch, Brian B.↗