Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Coherent multiple tone technique for ground based SPS control

The control system achieves beam forming by adjusting the phases of the individual transmitters onboard the solar power satellite. To specify the correct amount of adjustments, the phases of the power beams from each individual transmitter arriving at the rectanna center are measured, the appropriate corrections determined, and then relayed to the satellite. The functional operation of the ground based phase control concept is summarized. The key issues examined were: measurement waveform design and selection; phase measurement pilot reference design and selection; uplink phase corrections command link format and design; and system synchronization techniques.

Chie, C. M.↗

Controlling An Inverter-Driven Three-Phase Motor

Control system for three-phase permanent-magnet motor driven by linecommutated inverter uses signals generated by integrating back emf of each phase of motor. High-pass filter network eliminates low-frequency components from control loop while maintaining desired power factor.

Dolland, C.↗

Phase-shift effects on growth and transport of dust particles in VHF capacitively coupled silane discharges: Two dimensional fluid simulation

A two-dimensional (2D) self-consistent fluid model is developed to describe the formation, subsequent growth, transport, and charging mechanisms of nanoparticles in a capacitively coupled silane discharge applied by two very high frequency (VHF) sources with phase shift. In this discharge process, large anions are produced by a series of chemical reactions of anions with silane molecules, while the lower limit of the initial nanoparticles are taken as large anions (Si{sub 12}H{sub 25}{sup -} and Si{sub 12}H{sub 24}{sup -}) to directly link the coagulation module with the nucleation module. And then, by using the coagulation module, the particle number density quickly decreases over several orders of magnitude, whereas the particle size strongly increases. We investigate in particular the growth of the nanoparticles ranging in size from {approx}1 to 50 nm in coagulation processes. The influences of controlled phase shifts between VHF (50 MHz) voltages on the electron density, electron temperature, nanoparticle uniformity, and deposition rate, are carefully studied. It is found from our simulation that the plasma density and nanoparticle density become center high and more uniform as the phase shift increases from 0 to 180 deg. Moreover, the role of phase-shift control in the silane discharge diluted with hydrogen gas is also discussed.

36 MATERIALS SCIENCE↗

Navigation and performance analysis of a Mars surface sample return /MSSR/ mission

A Viking-derived MSSR mission involves a rendezvous in Mars orbit between the sample-carrying Mars Ascent Vehicle (MAV) and a modified Viking Orbiter spacecraft. Conditions for the automatic terminal rendezvous phase are established by an initial earth-controlled phase which uses very accurate relative state information obtained by multi-vehicle interferometric tracking data. A navigation analysis has demonstrated sufficient performance and control capability to satisfy those conditions prior to terminal rendezvous. Specific performance constraints for the mission are developed, leading to a sizing of vehicle weight requirements and trades applicable to a 1981 MSSR, launched by a single Titan IIIE/Centaur.

Satin, A. L.↗

Bandwidth controller for phase-locked-loop

A phase locked loop utilizing digital techniques to control the closed loop bandwidth of the RF carrier phase locked loop in a receiver provides high sensitivity and a wide dynamic range for signal reception. After analog to digital conversion, a digital phase locked loop bandwidth controller provides phase error detection with automatic RF carrier closed loop tracking bandwidth control to accommodate several modes of transmission.

Brockman, Milton H.↗

Variational Optical Phase Learning on a Continuous-Variable Quantum Compiler

Quantum process learning is a fundamental primitive that draws inspiration from machine learning with the goal of better studying the dynamics of quantum systems. One approach to quantum process learning is quantum compilation, whereby an analog quantum operation is digitized by compiling it into a series of basic gates. While there has been significant focus on quantum compiling for discrete-variable systems, the continuous-variable (CV) framework has received comparatively less attention. We present an experimental implementation of a CV quantum compiler that uses two-mode squeezed light to learn a Gaussian unitary operation. We demonstrate the compiler by learning a parameterized linear phase unitary through the use of target and control phase unitaries to demonstrate a factor of 5.4 increase in the precision of the phase estimation and a 3.6-fold acceleration in the time-to-solution metric when leveraging quantum resources. We further show how our approach can be extended to higher-dimensional compilation tasks. Our results are enabled by the tunable control of our cost landscape via variable squeezing, thus providing a critical framework to simultaneously increase precision and reduce time-to-solution.

97 MATHEMATICS AND COMPUTING↗

Phase Modulation Varies Average Acoustic Torque

Rotation of acoustically levitated objects controlled. Phase difference alternated between +90 degrees and -90 degrees. If system is at positive phase difference during greater portion of modulation cycle than at negative phase difference (or vice versa), there is nonzero time-averaged acoustic torque.

Elleman, D. D.↗

Temperature-dependent morphology of hybrid nanoflowers from elastin-like polypeptides

We report a method for creating hybrid organic-inorganic “nanoflowers” using calcium or copper ions as the inorganic component and a recombinantly expressed elastin-like polypeptide (ELP) as the organic component. Polypeptides provide binding sites for the dynamic coordination with metal ions, and then such noncovalent complexes become nucleation sites for primary crystals of metal phosphates. We have shown that the interaction between the stimuli-responsive ELP and Ca{sup 2+} or Cu{sup 2+}, in the presence of phosphate, leads to the growth of micrometer-sized particles featuring nanoscale patterns shaped like flower petals. The morphology of these flower-like composite structures is dependent upon the temperature of growth and has been characterized by scanning electron microscopy. The composition of nanoflowers has also been analyzed by energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The temperature-dependent morphologies of these hybrid nanostructures, which arise from the controllable phase transition of ELPs, hold potential for morphological control of biomaterials in emerging applications such as tissue engineering and biocatalysis.

36 MATERIALS SCIENCE↗

Spectral Changes in Metal Halide and High-pressure Sodium Lamps Equipped with Electronic Dimming

Electronic dimming of high-intensity discharge lamps offers control of photosynthetic photon flux (PPF) but is often characterized as causing significant spectral changes. Growth chambers with 400-W metal halide (MH) and high-pressure sodium (HPS) lamps were equipped with a dimmer system using silicon-controlled rectifiers (SCR) as high-speed switches. Phase control operation turned the line power off for some period of the alternating current cycle. At full power, the electrical input to HPS and MH lamps was 480 W (root mean squared) and could be decreased to 267 W and 428 W, respectively, before the arc was extinguished. Concomitant with this decrease in input power, PPF decreased by 60% in HPS and 50% in MH. The HPS lamp has characteristic spectral peaks at 589 and 595 nm. As power to the HPS lamps was decreased, the 589-nm peak remained constant while the 595-nm peak decreased, equaling the 589-nm peak at 345-W input, and the 589-nm peak was almost absent at 270-W input. The MH lamp has a broader spectral output but also has a peak at 589 nm and another smaller peak at 545 nm. As input power to the MH lamps decreased, the peak at 589 diminished to equal the 545-nm peak. As input power approached 428 W, the 589-nm peak shifted to 570 nm. While the spectrum changed as input power was decreased in the MH and HPS lamps, the phytochrome equilibrium ratio (P(sub fr):P(sub tot)) remains unchanged for both lamp types.

Bubenheim, David L.↗

Spectral Changes in Metal Halide and High-Pressure Sodium Lamps Equipped with Electronic Dimming

Electronic dimming of high-intensity discharge lamps offers control of Photosynthetic Photon Flux (PPF) but is often characterized as causing significant spectral changes. Growth chambers with 400-W Metal Halide (MH) and High-Pressure Sodium (HPS) lamps were equipped with a dimmer system using Silicon-Controlled Rectifiers (SCR) as high-speed switches. Phase control operation turned the line power off for some period of the alternating current cycle. At full power, the electrical input to HPS and MH lamps was 480 W (root mean squared) and could be decreased to 267 W and 428 W, respectively, before the arc was extinguished. Concomitant with this decrease in input power, PPF decreased by 60% in HPS and 50% in MH. The HPS lamp has characteristic spectral peaks at 589 and 595 nm. As power to the HPS lamps was decreased, the 589-nm peak remained constant while the 595-nm peak decreased, equaling the 589-nm peak at 345-W input, and 589-nm peak was almost absent at 270-W input. The MH lamp has a broader spectral output but also has a peak at 589 nm and another smaller peak at 545 nm. As input power approached 428 W, the 589-nm peak shifted to 570 nm. While the spectrum changed as input power was decreased in the MH and HPS lamps, the phytochrome equilibrium ratio (P(sub ft):P(sub tot)) remains unchanged for both lamp types.

Bubenheim, David L.↗

Non-Intrusive Sensor for In-Situ Measurement of Recession Rate of Ablative and Eroding Materials

A non-intrusive sensor for in-situ measurement of recession rate of heat shield ablatives. An ultrasonic wave source is carried in the housing. A microphone is also carried in the housing, for collecting the reflected ultrasonic waves from an interface surface of the ablative material. A time phasing control circuit is also included for time-phasing the ultrasonic wave source so that the waves reflected from the interface surface of the ablative material focus on the microphone, to maximize the acoustic pressure detected by the microphone and to mitigate acoustic velocity variation effects through the material through a de-coupling process that involves a software algorithm. A software circuit for computing the location off of which the ultrasonic waves scattered to focus back at the microphone is also included, so that the recession rate of the heat shield ablative may be monitored in real-time through the scan-focus approach.

Papadopoulos, George↗

Characterization and Suppression of the Electromagnetic Interference Induced Phase Shift in the JLab FEL Photo - Injector Advanced Drive Laser System

The drive laser for the photo-cathode gun used in the JLab Free Electron Laser (FEL) facility had been experiencing various phase shifts on the order of tens of degrees (>20{sup o} at 1497 MHz or >40ps) when changing the Advanced Drive Laser (ADL) [2][3][4] micro-pulse frequencies. These phase shifts introduced multiple complications when trying to setup the accelerator for operation, ultimately inhibiting the robustness and overall performance of the FEL. Through rigorous phase measurements and systematic characterizations, we determined that the phase shifts could be attributed to electromagnetic interference (EMI) coupling into the ADL phase control loop, and subsequently resolved the issue of phase shift to within tenths of a degree (<0.5{sup o} at 1497 MHz or <1ps). The diagnostic method developed and the knowledge gained through the entire process will prove to be invaluable for future designs of similar systems.

43 PARTICLE ACCELERATORS↗

Three phase power factor controller

A power control circuit for a three phase induction motor is described. The power factors for the three phases are summed to provide a control signal. This control signal is particularly filtered and then employed to control the duty cycle of each phase of input power to the motor.

Nola, F. J.↗

Three phase power factor controller

A power control circuit for a three phase induction motor is described. Power factors for the three phases are summed to provide a control signal, and this control signal is particularly filtered and then employed to control the duty cycle of each phase of input power to the motor.

Nola, F. J.↗

Solubility of U(VI) in chloride solutions. II. The stable oxides/hydroxides in alkaline KCl solutions: Thermodynamic description and relevance in cementitious systems

In this study, the solubility of U(VI) is investigated from undersaturation conditions in 0.1, 0.51, 1.03, 3.31 and 4.58 m KCl–KOH solutions at pHm = 7.5–14.6 (with pH m = –log [H + ] in molal units). All experiments were performed under Ar atmosphere at T = (22 ± 2)°C. XRD, quantitative chemical analysis, SEM–EDS and TG–DTA confirm that K 2 U 2 O 7 ·1.5H 2 O(cr) is the solid phase controlling the solubility in all evaluated systems at pH m ≥ 9.5. Below this pH m and with decreasing KCl concentration, the formation of sub-stoichiometric phases with K:U < 1 is indicated by XRD and solubility data. The concentration of uranium in equilibrium with K 2 U 2 O 7 ·1.5H 2 O(cr) shows a pH-independent behaviour up to pH m ≈ 11 regardless of ionic strength, whereas an increase of the solubility with a well–defined slope of +1 (log [U] vs. pH m ) is observed at pH m ≥11. These results are consistent with the predominance of UO 2 (OH) 3 – and UO 2 (OH) 4 2- species as previously reported in the literature. The combination of solubility data obtained in the present study with K 2 U 2 O 7 ·1.5H 2 O(cr) and the U(VI) hydrolysis scheme reported in Altmaier et al. (2017) yields a solubility product of log *K° s ,0{0.5K 2 U 2 O 7 ·1.5H 2 O(cr)} = (12.0 ± 0.2). SIT ion interaction coefficients for UO 2 (OH) 3 – and UO 2 (OH) 4 2- with K + are derived based on the newly generated experimental data in dilute to concentrated KCl systems and analogy with NaCl systems. This work extends the thermodynamic database available for U(VI) and allows more accurate source term calculations in the context of nuclear waste disposal under boundary conditions where significant K concentrations may be present and redox conditions lie in the stability field of U(VI). Finally, the K 2 U 2 O 7 ·1.5H 2 O(cr) solid phase can be considered to control the solubility of U(VI) in the degradation phase I of cement and cementitious materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Methods of Phase and Power Control in Magnetron Transmitters for Superconducting Accelerators

Various methods of phase and power control in magnetron RF sources of superconducting accelerators intended for ADS-class projects were recently developed and studied with conventional 2.45 GHz, 1 kW, CW magnetrons operating in pulsed and CW regimes. Magnetron transmitters excited by a resonant (injection-locking) phasemodulated signal can provide phase and power control with the rates required for precise stabilization of phase and amplitude of the accelerating field in Superconducting RF (SRF) cavities of the intensity-frontier accelerators. An innovative technique that can significantly increase the magnetron transmitter efficiency at the widerange power control required for superconducting accelerators was developed and verified with the 2.45 GHz magnetrons operating in CW and pulsed regimes. High efficiency magnetron transmitters of this type can significantly reduce the capital and operation costs of the ADSclass accelerator projects.

43 PARTICLE ACCELERATORS↗