SEARCH · Engineering Papers

Results for “PARTITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition

In the present study, in situ high-energy X-ray diffraction (HEXRD), dilatometry, and metallography were conducted for the purpose of understanding microstructure evolution during intercritical annealing of a Fe-0.19C-4.39Mn steel from a martensitic initial condition. Three different simulations for austenite growth and solute partitioning during isothermal holding were conducted using the DICTRA™ module of Thermo-Calc®. The microstructures after intercritical annealing exhibit film-like retained austenite; however, in situ HEXRD indicates that retained austenite in the initial martensitic microstructure had decomposed upon heating to the isothermal holding temperature, suggesting that film-like austenite may be generated during intercritical annealing via nucleation and growth of new austenite and without necessarily preserving initial retained austenite films in the martensitic microstructure. Metallography and in situ HEXRD also indicate that cementite had formed upon heating but did not readily dissolve during an 1800 s isothermal hold although considerable growth of austenite had occurred during the isothermal hold, suggesting that austenite nucleation and initial growth during intercritical annealing does not solely occur due to carbon partitioning. A simulation incorporating cementite suggests that the increase in austenite fraction during intercritical annealing initially occurs in association with Mn partitioning followed by austenite growth induced by gradual cementite dissolution.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Wave energy resources assessment for the multi-modal sea state of Hawaii

This paper describes development and validation of a 32-year wave hindcast for Hawaii as part of the wave energy resources assessment for the Exclusive Economic Zones of the US and affiliated territories. The nested model system comprises structured WAVEWATCH III models for the entire globe and the Central North Pacific as well as an unstructured SWAN model around the Hawaiian Islands with wind forcing from the Global Forecast System Reanalysis and its regional downscaling. The development effort follows the standards introduced by the International Electrotechnical Commission (IEC). The hindcast dataset was firstly validated with buoy measurements in terms of the six IEC wave energy resources parameters including the omnidirectional wave power ????, significant wave height ????????0, energy period ????????, spectral width ????0, direction of maximum directionally resolved wave power ?????????? ????????, and directionality coefficient ????. The comparison shows good overall agreement but with greater uncertainties for the spectral parameters ????0, ???????????????????? , and ???? formulated for narrow band spectra. The multimodal sea state in Hawaii always includes a mix of short-period wind seas, long-period swells from the North and South Pacific as well as waves with moderate periods from multiple sources. We partition the hindcast spectra based on the respective period ranges and directions and validate the partitioned spectral energy and parameters with measured values for implementation in wave energy resources assessment. The partitioned wave parameters from the hindcast allow separate seasonal descriptions of wind seas, north and south swells, and moderate-period waves for in-depth understanding of the wave climate and resources in Hawaii.

Li, Ning↗

DOE OSTI2021

A Fast Algorithm for Scanning Transmission Electron Microscopy Imaging and 4D-STEM Diffraction Simulations

Scanning transmission electron microscopy (STEM) is an extremely versatile method for studying materials on the atomic scale. Many STEM experiments are supported or validated with electron scattering simulations. However, using the conventional multislice algorithm to perform these simulations can require extremely large calculation times, particularly for experiments with millions of probe positions as each probe position must be simulated independently. Recently, the plane-wave reciprocal-space interpolated scattering matrix (PRISM) algorithm was developed to reduce calculation times for large STEM simulations. Here, we introduce a new method for STEM simulation: partitioning of the STEM probe into “beamlets,” given by a natural neighbor interpolation of the parent beams. This idea is compatible with PRISM simulations and can lead to even larger improvements in simulation time, as well requiring significantly less computer random access memory (RAM). We have performed various simulations to demonstrate the advantages and disadvantages of partitioned PRISM STEM simulations. We find that this new algorithm is particularly useful for 4D-STEM simulations of large fields of view. We also provide a reference implementation of the multislice, PRISM, and partitioned PRISM algorithms.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Characterizing PM 2.5 Emissions and Temporal Evolution of Organic Composition from Incense Burning in a California Residence

The chemical composition of incense-generated organic aerosol in residential indoor air has received limited attention in Western literature. In this study, we conducted incense burning experiments in a single-family California residence during vacancy. Here, we report the chemical composition of organic fine particulate matter (PM 2.5 ), associated emission factors (EFs), and gas-particle phase partitioning for indoor semivolatile organic compounds (SVOCs). Speciated organic PM 2.5 measurements were made using two-dimensional gas chromatography coupled with high-resolution time-of-flight mass spectrometry (GC×GC-HR-ToF-MS) and semivolatile thermal desorption aerosol gas chromatography (SV-TAG). Organic PM 2.5 EFs ranged from 7 to 31 mg g –1 for burned incense and were largely comprised of polar and oxygenated species, with high abundance of biomass-burning tracers such as levoglucosan. Differences in PM 2.5 EFs and chemical profiles were observed in relation to the type of incense burned. Nine indoor SVOCs considered to originate from sources other than incense combustion were enhanced during incense events. Time-resolved concentrations of these SVOCs correlated well with PM 2.5 mass (R 2 > 0.75), suggesting that low-volatility SVOCs such as bis(2-ethylhexyl)phthalate and butyl benzyl phthalate partitioned to incense-generated PM 2.5 . Both direct emissions and enhanced partitioning of low-volatility indoor SVOCs to incense-generated PM 2.5 can influence inhalation exposures during and after indoor incense use.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Protein C-GeM: A Coarse-Grained Electron Model for Fast and Accurate Protein Electrostatics Prediction

The electrostatic potential (ESP) is a powerful property for understanding and predicting electrostatic charge distributions that drive interactions between molecules. In this study, we compare various charge partitioning schemes including fitted charges, density-based quantum mechanical (QM) partitioning schemes, charge equilibration methods, and our recently introduced coarse-grained electron model, C-GeM, to describe the ESP for protein systems. Furthermore, when benchmarked against high quality density functional theory calculations of the ESP for tripeptides and the crambin protein, we find that the C-GeM model is of comparable accuracy to ab initio charge partitioning methods, but with orders of magnitude improvement in computational efficiency since it does not require either the electron density or the electrostatic potential as input.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

How Does Escherichia coli Allocate Proteome?

Microorganisms are shown to actively partition their intracellular resources, such as pro- teins, for growth optimization. Recent experiments have begun to reveal molecular com- ponents unpinning the partition; however, it remains unclear quantitatively how individual parts orchestrate to yield precise resource allocation that is both robust and dynamic. Here we developed a coarse-grained mathematical framework that centers on guanosine pentaphosphate (ppGpp)-mediated regulation, and used it to systematically uncover the design principles of proteome allocation in Escherichia coli. Our results showed that cellular ability of resource partition lies in an ultrasensitive, negative feedback control- ling topology with the ultrasensitivity arising from zero-order amino acid kinetics and the negative feedback from ppGpp-controlled ribosome synthesis. In addition, together with the time-scale separation between slow ribosome kinetics and fast turnovers of ppGpp and amino acids, the network topology confers the organism an optimization mechanism which mimics sliding mode control, a nonlinear optimization strategy that is widely used in man-made systems. We further showed that such a controlling mechanism is robust against parameter variations and molecular fluctuations, and is also efficient for biomass production over time. Furthermore, this work elucidates the fundamental controlling mechanism of E. coli proteome allocation, thereby providing insights into quantitative microbial physiology as well as the design of synthetic gene networks.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Advancing Organized Convection Representation in the Unified Model: Implementing and Enhancing Multiscale Coherent Structure Parameterization

To address the effect of stratiform latent heating on meso- to large-scale circulations, an enhanced implementation of the Multiscale Coherent Structure Parameterization (MCSP) is developed for the Met Office Unified Model. MCSP represents the top-heavy stratiform latent heating from under-resolved organized convection in general circulation models. We couple the MCSP with a mass-flux convection scheme (CoMorph-A) to improve storm lifecycle continuity. The improved MCSP trigger is specifically designed for mixed-phase deep convective cloud, combined with a background vertical wind shear, both known to be crucial for stratiform development. We also test a cloud top temperature dependent convective-stratiform heating partitioning, in contrast to the earlier fixed partitioning. Assessments from ensemble weather forecasts and decadal simulations demonstrate that MCSP directly reduces cloud deepening and precipitation areas by moderating mesoscale circulations. Indirectly, it amends tropical precipitation biases, notably correcting dry and wet biases over India and the Indian Ocean, respectively. Remarkably, the scheme outperforms a climate model ensemble by improving seasonal precipitation cycle predictions in these regions. The scheme also improves Madden-Julian Oscillation (MJO) spectra, achieving better alignment with observational and reanalysis data by intensifying the simulated MJO over the Indian Ocean during phases 4 to 5. However, the scheme increases precipitation overestimation over the Western Pacific. Shifting from fixed to temperature-dependent convective-stratiform partitioning reduces the Pacific precipitation overestimation and further improves the seasonal cycle in India. Spatially correlated biases highlight the necessity for advances beyond deterministic approaches to align MCSP with environmental conditions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Origin of biogeographically distinct ecotypes during laboratory evolution

Resource partitioning is central to the incredible productivity of microbial communities, including gigatons in annual methane emissions through syntrophic interactions. Previous work revealed how a sulfate reducer (Desulfovibrio vulgaris, Dv) and a methanogen (Methanococcus maripaludis, Mm) underwent evolutionary diversification in a planktonic context, improving stability, cooperativity, and productivity within 300-1000 generations. Here, we show that mutations in just 15 Dv and 7 Mm genes within a minimal assemblage of this evolved community gave rise to co-existing ecotypes that were spatially enriched within a few days of culturing in a fluidized bed reactor. The spatially segregated communities partitioned resources in the simulated subsurface environment, with greater lactate utilization by attached Dv but partial utilization of resulting H 2 by low affinity hydrogenases of Mm in the same phase. The unutilized H 2 was scavenged by high affinity hydrogenases of planktonic Mm, producing copious amounts of methane. Our findings show how a few mutations can drive resource partitioning amongst niche-differentiated ecotypes, whose interplay synergistically improves productivity of the entire mutualistic community.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Solvent-induced membrane stress in biofuel production: molecular insights from small-angle scattering and all-atom molecular dynamics simulations

The disruptive effect of organic solvents on microbial membranes represents a significant challenge to the economical production of green fuels and value-added chemicals from lignocellulosic feedstocks. One route to overcoming this challenge is to engineer microbes with membranes capable of resisting organic solvent stresses. In this regard, it is useful to understand the mechanisms by which organic solvents disrupt typical biomembranes. In this study, molecular dynamics (MD) simulation, complemented by small-angle X-ray and neutron scattering (SANS/SAXS), provide a molecular-scale view of the disruption of a microbial model membrane by 1-butanol and tetrahydrofuran (THF), two common water–organic cosolvent mixtures of importance in biofuel production. Solvent interactions at the interface between the head-group and fatty acid tail regions lead to more dramatic membrane changes than interactions solely at the head-groups or tails. Although both organic solvents are found to partition into the membrane, the depth of solvent penetration into the membrane is quite different. Specifically, 1-butanol localizes near the interface between the lipid heads and tails at low concentrations, but partitions into both the head and tail regions at high concentrations. In contrast, THF, overall, partitions less than 1-butanol and prefers the lipid tail regions. Importantly, the presence of 1-butanol near the head/tail interface introduces drastic membrane changes not seen with THF. The organic solvent interactions with the lipids lead to membrane thinning and fluidization, but more so for 1-butanol than for THF. These results suggest that an aim for the future engineering of robust membranes could be to design lipid head groups that reduce the accumulation of organic solvents at the head–tail interface and that rational designs need also be cognizant of the different solvent-specific mechanisms responsible for membrane disruption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Enhanced reactivity at the oil–water interface accelerates the synthesis of zymonic acid in microemulsions

Chemical reactions in microscale compartments, such as aerosols and emulsions, can exhibit significantly faster reaction rates relative to macroscale containers. This enhancement in chemistry is often due to the elevated importance of surfaces as reaction vessels are reduced to picoliter volumes. While most studies have focused on the air-water interface of droplets, there are comparably fewer studies of reactions in micron-scale aqueous solutions encapsulated by oil. Here we investigate the condensation reaction of pyruvic acid (PA) to form zymonic acid (ZA) and water. Using microfluidics and optical trapping, chemical kinetics are measured in monodisperse micron-sized emulsion droplets in situ via Raman spectroscopy. Relative to a macroscopic bulk solution, which exhibits little to no reaction over many days, we find efficient production of ZA over the same time period. A kinetic model is developed to elucidate the role of the interface in accelerating the microdroplet reaction kinetics. After quantifying the surface partitioning of PA from interfacial tension measurements, the rate coefficient for the condensation reaction at the oil-water interface is determined to be 1.8 × 10-2 M-1 s-1. This rate coefficient is estimated to be 105 larger than the reaction rate in bulk aqueous solutions. Compared to previous studies of accelerated ZA formation at the air-water interface on nanodroplets, we find that the reaction at the oil-water interface is 20 times more efficient. Despite this difference, the overall ZA formation rate in emulsions is significantly slower than in the same-sized aerosols, which arises from the weaker partitioning of PA to the oil-aqueous relative to air-water interface. These results highlight the interplay between interfacial partitioning and reactivity in accelerating chemistry in microcompartments and provides new insights into how interfacial composition influences condensation reactions.

Wallace, Brandon J↗

DOE OSTI2025

Cation selectivities in zwitterion grafted nanopores: effect of zwitterion architecture

Selective separation of monovalent cations is a critical challenge in applications such as water purification and lithium recovery from salt brines. Cross-linked zwitterionic amphiphilic copolymer (ZAC-X) membranes have gained attention for their exceptional anion permselectivity, attributed to self-assembled zwitterion-lined nanodomains that interact preferentially with anions according to their hydrated radii r hyd . However, these membranes show minimal selectivity among monovalent cations, despite significant differences in their hydration structures, motivating studies on the underlying mechanisms of cation transport and selectivity in this family of materials. In this study, we conducted molecular dynamics simulations of aqueous salt solutions within zwitterion-functionalized nanopores to elucidate the influence of dipole orientation of the zwitterionic (ZI) ligands on cation diffusivities, partitioning, and permeabilities. To this end, we examined two contrasting ZI ligand architectures: Motif A (surface–cation–anion, S–ZI + –ZI − ) and Motif B (surface–anion–cation, S–ZI − –ZI + ). Our results show that in Motif A, the sulfonate groups of the ZI ligands are localized near the pore center radially, leading to strong electrostatic interactions with small bare cations (Mg 2+ and Li + ). This configuration results in high cation partitioning but low cation diffusion, maintaining solution-diffusion tradeoff typical of functionalized membranes. In contrast, Motif B show that sulfonate groups shift radially toward the mid-region of the pore. This shift, especially for small bare cations, introduces steric constraints that weaken their interactions with the sulfonate groups, thereby enhancing hydration and lowering partitioning, while still maintaining their low self-diffusivity. These findings establish zwitterion dipole orientation as a powerful design lever for tuning cation selectivity in membrane systems and offer molecular-level insights for engineering next-generation ion separation materials.

Morishita, Kazuya [Univ. of Texas, Austin, TX (Uni↗

DOE OSTI2022

Replica symmetry breaking for the integrable two-site Sachdev–Ye–Kitaev model

We analyze a two-body non-Hermitian two-site Sachdev–Ye–Kitaev (SYK) model with the couplings of one site complex conjugated to the other site. This model, with no explicit coupling between the sites, shows an infinite number of second-order phase transitions, which is a consequence of the factorization of the partition function into a product over Matsubara frequencies. We calculate the quenched free energy in two different ways: first in terms of the single-particle energies and second by solving the Schwinger–Dyson equations of the two-site model. The first calculation can be done entirely in terms of a one-site model. The conjugate replica enters due to non-analyticities when Matsubara frequencies enter the spectral support of the coupling matrix. The second calculation is based on the replica trick of the two-site partition function. Both methods give the same result. The free-fermion partition function can also be rephrased as a matrix model for the coupling matrix. Up to minor details, this model is the random matrix model that describes the chiral phase transition of QCD, and the order parameter of the two-body model corresponds to the chiral condensate of QCD. Comparing to the corresponding four-body model, we are able to determine which features of the free energy are due to the chaotic nature of the four-body model. The high-temperature phase of both models is entropy dominated, and in both cases, the free energy is determined by the spectral density. The chaotic four-body SYK model has a low-temperature phase whose free energy is almost temperature-independent, signaling an effective gap of the theory even though the actual spectrum does not exhibit a gap. On the other hand, the low-temperature free energy of the two-body SYK model is not flat; in fact, it oscillates to arbitrarily low temperature. This indicates a less desirable feature that the entropy of the two-body model is not always positive in the low-temperature phase, which most likely is a consequence of the non-hermiticity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Repartitioning the Hamiltonian in many-body second-order Brillouin–Wigner perturbation theory: Uncovering new size-consistent models

Second-order Møller-Plesset perturbation theory is well-known as a computationally inexpensive approach to the electron correlation problem that is size-consistent with a size-consistent reference but fails to be regular. On the other hand, the less well-known many-body version of Brillouin-Wigner perturbation theory has the reverse properties: it is regular but fails to be size-consistent when used with the standard MP partitioning. Consequently, its widespread use remains limited. In this work, we analyze the ways in which it is possible to use alternative non-MP partitions of the Hamiltonian to yield variants of BW2 that are size-consistent as well as regular. We show that there is a vast space of such BW2 theories and also show that it is possible to define a repartitioned BW2 theory from the ground state density alone, which regenerates the exact correlation energy. We also provide a general recipe for deriving regular, size-consistent, and size-extensive partitions from physically meaningful components, and we apply the result to small model systems. The scope of these results appears to further set the stage for a revival of BW2 in quantum chemistry.

Ab initio perturbation↗

DOE OSTI2020

Off-shell effective energy theory: A unified treatment of the Hubbard model from $\textit{d} = 1$ to $\textit{d = ∞}$

Here we propose an exact formalism, off-shell effective energy theory (OET), which provides a thermodynamic description of a generic quantum Hamiltonian. The OET is based on a partitioning of the Hamiltonian and a corresponding density matrix ansatz constructed from an off-shell extension of the equilibrium density matrix; and there are dual realizations based on a given partitioning. To approximate OET, we introduce the central point expansion (CPE), which is an expansion of the density matrix ansatz, and we renormalize the CPE using a standard expansion of the ground-state energy. In this work we showcase the OET for the one-band Hubbard model in $\textit{d}$ = 1 , 2, and $\infty$, using a partitioning between kinetic and potential energy, yielding two realizations denoted as $\mathcal{K}$ and $\mathcal{X}$. OET shows favorable agreement with exact or state-of-the-art results over all parameter space, and has a negligible computational cost. Physically, $\mathcal{K}$ describes the Fermi liquid, while $\mathcal{X}$ gives an analogous description of both the Luttinger liquid and the Mott insulator. Our approach should find broad applicability in lattice model Hamiltonians, in addition to real materials systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Scattering neutrinos, spin models, and permutations

We consider a class of Heisenberg all-to-all coupled spin models inspired by neutrino interactions in a supernova with N degrees of freedom. These models are characterized by a coupling matrix that is relatively simple in the sense that there are only a few, relative to N , nontrivial eigenvalues, in distinction to the classic Heisenberg spin-glass models, leading to distinct behavior in both the high-temperature and low-temperature regimes. When the momenta of the neutrinos are uniform and random in directions, we can calculate the large- N partition function for the quantum Heisenberg model. In particular, the high-temperature partition function predicts a non-Gaussian density of states, providing interesting counterexamples showing the limits of general theorems on the density of states for quantum spin models. We can repeat the same argument for classical Heisenberg models, also known as rotor models, and we find the high-temperature expansion is completely controlled by the eigenvalues of the coupling matrix, and again predicts non-Gaussian behavior for the density of states as long as the number of eigenvalues does not scale linearly with N . Indeed, we derive the amusing fact that these partition functions are essentially the generating function for counting permutations in the high-temperature regime. Finally, for the case relevant to neutrinos in a supernova, we identify the low-temperature phase as a unique state with the direction of the momenta of the neutrino dictating its coherent state in flavor-space, a state we dub the “flavor-momentum-locked” state. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

MassiveGNN: Efficient Training via Prefetching for Massively Connected Distributed Graphs

Graph Neural Networks (GNN) are indispensable in learning from graph-structured data, yet their rising computational costs, especially on massively connected graphs, pose significant challenges in terms of execution performance. To tackle this, distributed-memory solutions such as partitioning the graph to concurrently train multiple replicas of GNNs are in practice. However, approaches requiring a partitioned graph usually suffer from communication overhead and load imbalance, even under optimal partitioning and communication strategies due to irregularities in the neighborhood minibatch sampling. This paper proposes practical trade-offs for improving the sampling and communication overheads for representation learn- ing on distributed graphs (using popular GraphSAGE architecture) by developing a parameterized prefetch and eviction scheme on top of the state-of-the-art Amazon DistDGL distributed GNN framework, demonstrating about 15–40% improvement in end-to-end training performance on the NERSC Perlmutter supercomputer for various OGB datasets.

Machine Leanring, high performance comptuing, grap↗

DOE OSTI2024

BCSR on GPU: A Way Forward Extreme-scale Graph Processing on Accelerator-enabled Frontier Supercomputer

Handling large graphs in a distributed environment requires effective partitioning across processors and efficient management of local partitions. In 2D partitioning, local graphs often become too sparse, making memory-efficient data structures crucial. Using the Compressed Sparse Row (CSR) format wastes space, especially for > 83% of vertices with empty edges for the sparse graphs. This study explores bit-CSR (BCSR), a modified CSR representation, on GPUs to reduce memory usage in graph computations. We achieved 16.67% memory savings on a sparse rmat dataset with 268 million vertices and 357 million edges, without performance degradation, supported by both theoretical and experimental storage savings of 33%. However, we observed a 1.7× slowdown in degree lookup times due to bitwise operations on AMD CPUs. This analysis highlights the potential of BCSR on GPUs for improving Graph500 benchmark performance on GPU-accelerated systems, such as the Frontier supercomputer.

Sattar, Naw Safrin↗

DOE OSTI2021

Trust: Triangle Counting Reloaded on GPUs

Triangle counting is a building block for a wide range of graph applications. Here, traditional wisdom suggests that i) hashing is not suitable for triangle counting, ii) edge-centric triangle counting beats vertex-centric design, and iii) communication-free and workload balanced graph partitioning is a grand challenge for triangle counting. On the contrary, we advocate that i) hashing can help the key operations for scalable triangle counting on Graphics Processing Units (GPUs), i.e., list intersection and graph partitioning, ii) vertex-centric option reduces both hash table construction cost and memory consumption, which is limited on GPUs. In addition, iii) we exploit graph and workload collaborative, and hash-based 2D partitioning to scale vertex-centric triangle counting over 1,000 GPUs with sustained scalability. In this work, we present TRUST, which performs triangle counting with the hash operation and vertex-centric paradigm. To the best of our knowledge, TRUST is the first work that achieves over one trillion Traversed Edges Per Second (TEPS) rate for triangle counting.

97 MATHEMATICS AND COMPUTING↗