Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Excitation of optically trapped single particles using femtosecond pulses

Excitation from optically trapped particles is examined through laser-induced breakdown spectroscopy following interactions with mJ-level fs pulses. Optical emissions from sub-ng ablation of precisely positioned cupric oxide microparticles are used as a method to spatially resolve laser–particle interactions resulting in excitation. External focusing lenses are often used to change the dynamics of nonlinear self-focusing of fs pulses to form laser filaments or, alternatively, to form very intense air plasmas. Given the significant implications external focusing has on laser propagation and plasma conditions, single-particle emissions are studied with focusing lenses ranging from 50 to 300 mm. It is shown that, while single particles are less excited at longer focal lengths due to limited energy transfer through laser–particle interactions, the cooler plasma results in a lower thermal background to reveal resolved single-shot emission peaks. Furthermore, by developing an understanding in the fundamental interaction that occurs between single particles and fs pulses and filaments, practical improvements can be made for atmospheric remote sensing of low-concentration aerosols.

42 ENGINEERING↗
DOE OSTI2020

A Thermodynamic Investigation of Ni on Thin-Film Titanates (ATiO3)

Thin, ~1-nm films of CaTiO3, SrTiO3, and BaTiO3 were deposited onto MgAl2O4 by Atomic Layer Deposition (ALD) and then studied as catalyst supports for ~5 wt % of Ni that was added to the perovskite thin films by Atomic Layer Deposition. Scanning Transmission Electron Microscopy demonstrated that both the Ni and the perovskites uniformly covered the surface of the support following oxidation at 1073 K, even after redox cycling, but large Ni particles formed following a reduction at 1073 K. When compared to Ni/MgAl2O4, the perovskite-containing catalysts required significantly higher temperatures for Ni reduction. Equilibrium constants for Ni oxidation, as determined from Coulometric Titration, indicated that the oxidation of Ni shifted to lower PO2 on the perovskite-containing materials. Based on Ni equilibrium constants, Ni interactions are strongest with CaTiO3, followed by SrTiO3 and BaTiO3. The shift in the equilibrium constant was shown to cause reversible deactivation of the Ni/CaTiO3/MgAl2O4 catalyst for CO2 reforming of CH4 at high CO2 pressures, due to the oxidation of the Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solvent-induced electrochemistry at an electrically asymmetric carbon Janus particle

Chemical doping through heteroatom substitution is often used to control the Fermi level of semiconductor materials. Doping also occurs when surface adsorbed molecules modify the Fermi level of low dimensional materials such as carbon nanotubes. A gradient in dopant concentration, and hence the chemical potential, across such a material generates usable electrical current. This opens up the possibility of creating asymmetric catalytic particles capable of generating voltage from a surrounding solvent that imposes such a gradient, enabling electrochemical transformations. In this work, we report that symmetry-broken carbon particles comprised of high surface area single-walled carbon nanotube networks can effectively convert exothermic solvent adsorption into usable electrical potential, turning over electrochemical redox processes in situ with no external power supply. The results from ferrocene oxidation and the selective electro-oxidation of alcohols underscore the potential of solvent powered electrocatalytic particles to extend electrochemical transformation to various environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

New insights into the role of fly ash in mitigating alkali-silica reaction (ASR) in concrete

Alkali-silica reaction (ASR) mitigation mechanisms of fly ash in concrete are still being debated and remain an interesting research topic. This study provides new insights into the role of aluminum oxide (Al{sub 2}O{sub 3}) in fly ash particles on ASR mitigation. A comprehensive test program was conducted and included expansion measurements, dissolution model experiments of exposed and embedded borosilicate glass elements, analyses of pore and immersion solutions, quantification of Ca(OH){sub 2} content, and microstructural analyses. It was found that in addition to the traditionally accepted mitigation mechanisms such as alkali binding, diffusion control and reduction in available Ca(OH){sub 2}, dissolution control of reactive aggregates by aluminum discharged from fly ash particles also contributed to the ASR mitigation. Re-introducing alkalis to fly ash-incorporated concrete prisms which exhibited undeleterious expansion under a long-term ASR exposure triggered and significantly increased the subsequent expansion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ending the Chase for a Perfect Binder: Role of Surface Chemistry Variation and its Influence on Silicon Anodes

In this work we examine the influence of the type of silicon source material (two milled and two plasma enhanced chemical vapor deposition) on the electrochemical performance of silicon-based anodes for Li-ion batteries. The four representative Si sources were previously identified in literature but have never been compared side by side, which is critical to understanding the wide variation in performance reported for silicon-based electrodes. These particles display unique surface features associated with surface oxides and residual precursor species (Si-N, Si-C, Si-H) which impact processability by changing interactions within the electrode slurry and the resulting electrochemical performance. These properties should be taken into consideration when utilizing “off-the-shelf” Si powders for investigations and would be good variables to explore to understand why certain chemistries display suitable performance, while others “don't work.”

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Particle-based high-temperature thermochemical energy storage reactors

Solar and other renewable energy driven gas-solid thermochemical energy storage (TCES) technology is a promising solution for the next generation energy storage systems due to its high operating temperature, efficient energy conversion, ultra-long storage duration, and potential high energy density. Experimental and theoretical studies suggest that the respective gravimetric and volumetric TCES energy storage densities vary from 200 to 3000 kJ kg –1 and 1–3 GJ m –3 . Solar radiation or heat generated from electric furnaces powered by renewable electricity can be stored in the form of chemical energy through endothermic reactions, while the stored chemical energy can be converted to thermal energy via an exothermic reaction when needed. The design of highly effective reactors requires a deep understanding of materials, thermodynamics, chemical kinetics, and transport phenomena. At time of writing, TCES reactors are yet to be deployed at commercially relevant scales, leaving a substantial gap between development efforts and commercial feasibility. Therefore, this review aims to examine the state-of-the-art design and performance of particle-based TCES reactors with different reactive materials. Fundamentals related to TCES reactive materials, reaction conditions, thermodynamics and kinetics, and transport phenomena are reviewed in detail to provide a comprehensive understanding of the reactor design and operation. Five major types of TCES reactors have been comprehensively reviewed and compared, including fixed, moving, rotary, fluidized, and entrained bed reactors. Most reported prototype reactors in the literature operate at lab scale with thermal inputs below 40 kW, and scaled TCES reactors (e.g., at megawatt level) are yet to be demonstrated. The nominal reactor operating temperatures range from 300 to 1500 °C, depending on the selected chemistry, reactive material, and heat sources. To evaluate their designs, the reactors are assessed in aspects of performance, cost, and durability. Discrepancies in performance indicators of energy storage density, extent of reaction, and various energy efficiencies are highlighted. The scale-up of reactors and power block integration, which hold the key to the successful commercialization of TCES systems, are critically analyzed. Furthermore, advanced materials (both reactive materials and ceramic reactor housing materials), effective particle flow control, advanced modeling tools, and novel system design may bring significant improvement to the energy efficiency, storage density and cost competitiveness of particle-based TCES reactors.

25 ENERGY STORAGE↗
DOE OSTI2025

Vertically Self-Oriented, Ultrafast 1D ZnO:Li Nanorods as Scintillators for Thermal Neutron Detection

Detection of special nuclear materials (SNMs) is of vital importance in the prevention of nuclear terrorism and to secure states’ national security. Neutron detection is a particularly useful tool to identify SNM, and neutron-sensitive scintillators have many promising properties, such as ease of use, good time resolution, and high detection efficiency. In this work, we develop highly stable, self-oriented, ultrafast 1D ZnO:Li (and codoped with Al, Ga, and In) nanorods (NRs) as thermal neutron-sensitive scintillators. Lithium-6 has high thermal neutron cross section for the (n, α) reaction in ZnO:Li scintillators which have a vertical nano array design greatly increasing the effective surface area and scintillation efficiency. Cost-effective low-temperature (95 °C) hydrothermal growth is used to obtain highly crystalline ZnO:Li nano scintillators by combining nuclear range data and electron transport mechanisms. Among the studies using low-temperature hydrothermal synthesis and a relatively low annealing temperature (≈350 °C) along with optimized NRs (length ≈ 5–8 μm, mean diameter ≈ 700 nm) for thermal neutron detection, this study reports the shortest scintillation decay time (≈ 470 ps) so far to the best of our knowledge. In conclusion, this nano array scintillator combines the advantages of a low-cost growth technique with environmentally friendly and widely available materials.

Ions↗
DOE OSTI2025

Data-Driven Discovery of Bimetallic Nanoparticles Catalysts for the Hydrogenolysis of Polyethylene

Supported platinum nanoparticles are known to convert polyolefins to high-quality liquid hydrocarbons with hydrogen under relatively mild conditions. However, no systematic study has been undertaken using bimetallic catalysts for polyethylene upcycling. Specifically, a total of 98 monometallic and bimetallic combinations (Ag, Cr, Co, Cu, Fe, Ga, In, Mn, Ni, Pd, Pt, Rh, Ru, Zr) on alumina were synthesized utilizing surface organometallic chemistry (SOMC) technique via robotic platform. These were investigated at a small scale (10 mg of catalyst and 50 mg of polyethylene) for their activity for the hydrogenolysis of polyethylene in a high-throughput batch reactor. Combinations of Ni and Co were selected as candidates with high activity toward conversion into paraffin oils. Reaction conditions were optimized with Ni/Co/Al 2 O 3 catalyst at a larger scale (300 mg catalyst and 3 g polyethylene) to obtain a high yield (93.1%) of paraffin wax with desired properties (M n = 380 Da) and low polydispersity (Đ = 1.2). Ni/Co/Al 2 O 3 was compared against Co/Ni/Al 2 O 3 to understand the role of the deposition sequence. When Co is deposited before Ni, a layer of cobalt aluminate is formed upon reduction, stabilizing the deposition of 5 nm metallic Ni particles. When nickel is deposited before Co, particles are larger (average >20 nm) and more oxidized (Ni δ+ in NiAl 2 O 4 ), decreasing the availability of the catalytically active metallic Ni. In conclusion, the difference in electronic environments was also described by DFT calculations, which revealed that smaller 3D clusters of Ni are preferred on CoAl2O4 over the 3D clusters on NiAl 2 O 4 and that these smaller clusters are more reducible, as confirmed experimentally.

Polymer↗
DOE OSTI2023

Observationally Constrained Modeling of the Reactive Uptake of Isoprene-Derived Epoxydiols under Elevated Relative Humidity and Varying Acidity of Seed Aerosol Conditions

Isoprene is the non-methane volatile organic compound (VOC) emitted in largest amounts to the atmosphere, and it is a significant source of secondary organic aerosol (SOA) mass. The uptake of isoprene oxidation products followed by multiphase chemistry in fine particles is the key pathway to form isoprene epoxydiol-derived SOA (IEPOX-SOA). However, many parameters that relate to diffusion and reaction of IEPOX in the particle phase remain uncertain, since reaction kinetics previously measured in bulk aqueous phase solutions might be different from atmospheric aerosols. Here, we use simultaneous environmental chamber measurements of multiple parameters governing IEPOX-SOA formation at timescales of ~hours: particle size distribution, composition, and volatility of IEPOX-SOA to constrain the key parameters governing IE-POX-SOA formation under humid (i.e., 50% relative humidity, RH) and varying seed aerosol acidity conditions. Reducing the 2-methyltetrol (tetrol) reaction rate constants by a factor of 4 brings the model predictions in agreement with the IEPOX-SOA measurements with acidified ammonium bisulfate seed aerosols. For less acidic ammonium sulfate aerosols both the organo-sulfate (OS) and tetrol reaction rate constants need to be reduced to bring model predictions closer to chamber observations. Using the measured non-volatile content of IEPOX-SOA we constrain the oligomerization timescale of 2-methyltetrols. We find that the oligomerization timescale is 4 hours with acidified seed aerosols, but a much longer time scale of 24 hours is needed for non-acidified seed aerosols, indicating that the aerosol acidity greatly affects the oligomerization rate of tetrols. Here we show that the actual kinetics of IEPOX-SOA formation rate on aerosol seeds consisting of both ammonium bisulfate and ammonium sulfate are a factor of 4~5 slower under 50-60% RH conditions compared to their application in previous models, which were based on bulk aqueous solution measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Au and Pt Remain Unoxidized on a CeO 2 -Based Catalyst during the Water–Gas Shift Reaction

The active form of Au and Pt in CeO 2 based catalysts for the WGS reaction is an issue that although it has been widely studied remains unclear. On one hand, ionic species might be responsible of weakening the Ce-O bonds increasing the oxygen mobility and WGS activity. On the other hand, the close contact of Au or Pt atoms with CeO 2 oxygen vacancies at the metal/CeO 2 interface might provide the active sites for an efficient reaction. In this work, by using in-situ X-ray absorption spectroscopy, we demonstrate that both Au and Pt remain unoxidized during the reaction. Here, remarkable differences involving the dynamics established by both species under WGS atmospheres were recognized. For the pre-reduced Pt catalyst, an increase of the conversion coincided with a re-structuration of the Pt atoms into cuboctahedrical metallic particles without significant variations on the overall particle size. Contrary to the relatively static behavior of Pt 0 , Au 0 nanoparticles exhibited a sequence of particle splitting and agglomeration whilst maintaining a zero oxidation state, even though not being located in a metallic environment during the process. High WGS activity was obtained when Au atoms were surrounded by oxygen. The fact that Au preserves its unoxidized state indicates that the chemical interaction between Au and oxygen must be necessarily electrostatic being such electrostatic interaction fundamental for a top performance in the WGS process.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Improved constraints on hematite refractive index for estimating climatic effects of dust aerosols

Abstract Uncertainty in desert dust composition poses a big challenge to understanding Earth’s climate across different epochs. Of particular concern is hematite, an iron-oxide mineral dominating the solar absorption by dust particles, for which current estimates of absorption capacity vary by over two orders of magnitude. Here, we show that laboratory measurements of dust composition, absorption, and scattering provide valuable constraints on the absorption potential of hematite, substantially narrowing its range of plausible values. The success of this constraint is supported by results from an atmospheric transport model compared with station-based measurements. Additionally, we identify substantial bias in simulating hematite abundance in dust aerosols with current soil mineralogy descriptions, underscoring the necessity for improved data sources. Encouragingly, the next-generation imaging spectroscopy remote sensing data hold promise for capturing the spatial variability of hematite. These insights have implications for enhancing dust modeling, thus contributing to efforts in climate change mitigation and adaptation.

Environmental Sciences & Ecology↗
DOE OSTI2022

Rapid growth of anthropogenic organic nanoparticles greatly alters cloud life cycle in the Amazon rainforest

Aerosol-cloud interactions remain uncertain in assessing climate change. While anthropogenic activities produce copious aerosol nanoparticles smaller than 10 nanometers, they are too small to act as efficient cloud condensation nuclei (CCN). The mechanisms responsible for particle growth to CCN-relevant sizes are poorly understood. Here, we present aircraft observations of rapid growth of anthropogenic nanoparticles downwind of an isolated metropolis in the Amazon rainforest. Model analysis reveals that the sustained particle growth to CCN sizes is predominantly caused by particle-phase diffusion-limited partitioning of semivolatile oxidation products of biogenic hydrocarbons. Cloud-resolving numerical simulations show that the enhanced CCN concentrations in the urban plume substantially alter the formation of shallow convective clouds, suppress precipitation, and enhance the transition to deep convective clouds. The proposed nanoparticle growth mechanism, expressly enabled by the abundantly formed semivolatile organics, suggests an appreciable impact of anthropogenic aerosols on cloud life cycle in previously unpolluted forests of the world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗
DOE OSTI2024

AGR-1 UCO Kernel Phase Analysis Imaging Archive

UCO kernels in tri-structural isotropic (TRISO) particles consist of a heterogeneous mixture of uranium oxide and uranium carbide. During the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program, mean kernel composition was specified based on bulk measurements of uranium, oxygen, and carbon content, as well as the resulting O/U, C/U, and O+C/U ratios. Further development of quality control characterization methods has resulted in a method for more direct measurement of phase fractions on a per-kernel basis using optical microscopy of polished kernel cross sections. This report provides benchmark values for this analysis method when applied to kernels from the AGR-1 campaign and to the raw images used.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Understanding Biases in Sample Preparation Techniques for Coupled Scanning Electron Microscopy and MAMA PuO 2 Morphological Analysis

In this project, the scanning electron microscopy (SEM) sampling method used during the statistical design study (SDS) was investigated to determine if any sampling biases were present in the analyzed data. Using standard particle size distribution powders from the National Institute of Standards and Technology (NIST 1984 standard reference material) with the origin wet dispersion method, it was determined that a bias to smaller particles was present. This was supported by theoretical calculations using Stokes’ law to determine the settling rate of spherical particles of roughly the same size and mass as those found in the SDS. Based on the theoretical calculations, it was determined that the settling rate for each of the 76 powder sets in the SDS could be unique based on specific particle shape and mass distributions, making a universal correction factor/formula not applicable. Therefore, priority shifted to developing an improved wet dispersion method that significantly reduced the particle settling rate for all particle size and shapes. This was achieved by replacing the original solvent (isopropyl alcohol) with a heavy liquid (lithium heteropolytungstates), which dramatically slowed the settling rate and allowed for the capture of a suitable homogeneous aliquot. SEM imaging and Morphological Analysis for Material Attribution (MAMA) software analysis were conducted on the NIST standard, and the SEM/MAMA data were compared to data captured by a dynamic image analysis particle size analyzer. The resulting data confirmed that the new wet dispersion method does indeed deliver an improved representative aliquot to the SEM stub. For instance, in the NIST certificate, the average particle size is ~17.1 µm ± 2.2 µm with a normal distribution. The initial wet dispersion method resulted in a drastically reduced average particle size of 6.1 µm in addition to a non-representative heavy bi-modal distribution whereas the improved LST wet dispersion method resulting in an average particle size that was much closer to the NIST certificate (12.7 µm) with a similar normal distribution. Although the improved method was still short of the NIST certificate average, atomic force microscopy analysis determined that the resulting ~20-25% reduction in size was due to particles sinking into the carbon sticky tape used for SEM imaging. It is believed that that this bias can be calibrated in a much more predicable manner than the original settling rate bias. In addition, the matching normal distribution curves between the NIST certificate and the heavy liquid method indicate a much-improved representative aliquot has been sampled and imaged. A surrogate CeO 2 powder was used to reflect PuO 2 more accurately and to aid in implementing radiological controls and shielding. The resulting data sets from the SEM/MAMA method and the particle size analyzer give almost identical average particle sizes and particle distribution statistics. Future work will re-analyze several select runs from the SDS to determine if morphological signatures can be found with the improved sampling method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Acute Exposure to Aerosolized Nanoplastics Modulates Redox-Linked Immune Responses in Human Airway Epithelium

Micro- and nanoplastics (MPs and NPs) are pervasive environmental pollutants detected in aquatic ecosystems, with emerging evidence suggesting their presence in airborne particles generated by water body motion. Inhalation exposure to airborne MPs and NPs remains understudied despite documented links between occupational exposure to these particles and adverse respiratory outcomes, including airway inflammation, oxidative stress, and chronic respiratory diseases. This study explored the effects of acute NP exposure on a fully differentiated 3D human airway epithelial model derived from 14 healthy donors. Airway epithelium was exposed to aerosolized 50 nm polystyrene NPs at concentrations ranging from 2.5 to 2500 µg/mL for three minutes per day over three days. Functional assays revealed no significant alterations in tissue integrity, cell survival, mucociliary clearance, or cilia beat frequency, suggesting intact epithelial function post-exposure. However, cytokine and chemokine profiling identified a significant five-fold increase in CCL3 (MIP-1α), a neutrophilic chemoattractant, in NP-exposed samples compared to controls. This was corroborated by increased neutrophil chemotaxis in response to conditioned media from NP-exposed tissues, indicating a pro-inflammatory neutrophilic response. Conversely, levels of interleukins (IL-21, IL-2, IL-15), CXCL10, and TGF-β were significantly reduced, suggesting immunomodulatory effects that may impair adaptive immune responses and tissue repair mechanisms. These findings demonstrate that short-term exposure to NP-containing aerosols induces a distinct pro-inflammatory response in airway epithelium, characterized by enhanced neutrophil recruitment and reduced secretion of key immune modulators. These findings underscore the potential for aerosolized NPs to induce oxidative and inflammatory stress, raising concerns about their long-term impact on respiratory health and redox regulation.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Nanowire-based hydrodesulfurization catalysts for hydrocarbon fuels

The present development is a metal particle coated nanowire catalyst for use in the hydrodesulfurization of fuels and a process for the production of the catalyst. The catalyst comprises titanium(IV) oxide nanowires wherein the nanowires are produced by exposure of a TiO2—KOH paste to microwave radiation. Metal particles selected from the group consisting of molybdenum, nickel, cobalt, tungsten, or a combination thereof, are impregnated on the metal oxide nanowire surface. The metal impregnated nanowires are sulfided to produce catalytically-active metal particles on the surface of the nanowires The catalysts of the present invention are intended for use in the removal of thiophenic sulfur from liquid fuels through a hydrodesulfurization (HDS) process in a fixed bed reactor. The presence of nanowires improves the HDS activity and reduces the sintering effect, therefore, the sulfur removal efficiency increases.

Sunkara, Mahendra Kumar↗