Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Normal modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Parameter space mapping of the Princeton magnetorotational instability experiment

Extensive simulations of the Princeton Magnetorotational Instability (MRI) Experiment with the Spectral/Finite Element code for Maxwell and Navier-Stokes Equations (SFEMaNS) have been performed to map the MRI-unstable region as a function of inner cylinder angular velocity and applied vertical magnetic field. The angular velocities of the outer cylinder and the end-cap rings follow the inner cylinder in fixed ratios optimized for MRI. Here, we first confirm the exponential growth of the MRI linear phase using idealized conducting vertical boundaries (end caps) rotating differentially with a Taylor-Couette profile. Subsequently, we run a multitude of simulations to scan the experimental parameter space and find that the normalized volume-averaged mean-square radial magnetic field, our main instability indicator, rises significantly where MRI is expected. At various locations, the local radial components of fluid velocity and generated magnetic field are well correlated with the volume-averaged indicator. Based on this correlation, a diagnostic system that will measure the radial magnetic field at several locations on the inner cylinder is proposed as the main comparison between simulation and experiment. A detailed analysis of poloidal mode structures in the SFEMaNS code indicates that MRI, rather than Ekman circulation or Rayleigh instability, dominates the fluid behavior in the region where MRI is expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Adaptive Deep Reinforcement Learning Algorithm for Distribution System Cyber Attack Defense With High Penetration of DERs

With grid modernization, smart inverters are increasingly used to execute advanced controls for distribution network reliability. However, this also increases the cyber-attack space. Here this paper focuses on the defense approaches to restore the system to normal operation circumstances in the presence of cyber-attacks. A unique deep reinforcement learning (DRL) method is developed to minimize voltage violations and reduce power losses for impacted feeders. The defense problem is reformulated as a Markov decision-making process to dynamically control DERs while minimizing load shedding. This is achieved via an improved soft actor-critic (SAC)-based DRL algorithm, which can govern DER set points and load-shedding scenarios in discrete and continuous modes via the auto-tune entropy and Gaussian policy features. Numerical comparison results on the modified IEEE 123-node system with other control approaches, such as Volt-VAR (VV), Volt-Watt (VW), and model predictive control (MPC) show that the proposed method can eliminate voltage violations and provide feasible control actions that perform complete mitigation of cyber-threats.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Performance Modeling of Tandem Photovoltaics: A Yearlong Outdoor Degradation Analysis of a Ga⁢As//Si Minimodule

We present a performance modeling and degradation analysis framework for tandem photovoltaic modules, building upon established procedures for crystalline silicon devices and adapting them to account for the spectral sensitivity of multijunction technologies. The methodology employs filter criteria to select outdoor measurements close to standard test conditions (STC) under stable spectral and ambient conditions, followed by normalization of power production data with corrections for temperature, irradiance, and precipitable water vapor. We demonstrate this framework using a mechanically stacked four-terminal gallium arsenide (Ga⁢As) // silicon (Si) tandem solar minimodule deployed outdoors from October 2019 to January 2021 in Golden, Colorado, USA. We determined degradation rates of −4.1 ±0.2%/year for the Ga⁢As subcell and −2.5 ±0.9%/year for the Si subcell, with analysis of individual performance metrics indicating that packaging degradation, particularly delamination, was the dominant failure mode. Simulations using PVcircuit, an open-source equivalent-circuit solver, confirmed these findings. The presented methodology provides a reproducible foundation for performance modeling and degradation analysis of emerging tandem technologies.

14 SOLAR ENERGY↗
DOE OSTI2022

Whistler Waves Associated With Electron Beams in Magnetopause Reconnection Diffusion Regions

Abstract Whistler waves are often observed in magnetopause reconnection associated with electron beams. We analyze seven MMS crossings surrounding the electron diffusion region (EDR) to study the role of electron beams in whistler excitation. Waves have two major types: (a) Narrow‐band waves with high ellipticities and (b) broad‐band waves that are more electrostatic with significant variations in ellipticities and wave normal angles. While both types of waves are associated with electron beams, the key difference is the anisotropy of the background population, with perpendicular and parallel anisotropies, respectively. The linear instability analysis suggests that the first type of wave is mainly due to the background anisotropy, with the beam contributing additional cyclotron resonance to enhance the wave growth. The second type of broadband waves are excited via Landau resonance, and as seen in one event, the beam anisotropy induces an additional cyclotron mode. The results are supported by particle‐in‐cell simulations. We infer that the first type occurs downstream of the central EDR, where background electrons experience Betatron acceleration to form the perpendicular anisotropy; the second type occurs in the central EDR of guide field reconnection. A parametric study is conducted with linear instability analysis. A beam anisotropy alone of above ∼3 likely excites the cyclotron mode waves. Large beam drifts cause Doppler shifts and may lead to left‐hand polarizations in the ion frame. Future studies are needed to determine whether the observation covers a broader parameter regime and to understand the competition between whistler and other instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Pressure-driven symmetry transitions in dense H 2 O ice

X-ray diffraction and Raman spectroscopy of H 2 O (ice) structures are measured under static compression in combination with grain normalizing heat treatment via direct laser heating. Here, we report the transition from cubic ice-VII to a structure of tetragonal symmetry, ice-VII t at 5.1 ± 0.5 GPa. This is succeeded by the H-bond symmetrization transition occurring at a pressure of 30.9 ± 3 GPa. Both experimental observations are supported by simulated Raman spectra from density-functional theory quantum calculations. The transition to H-bond symmetrization is evidenced by the reversible emergence of its characteristic Raman mode and a 2.5-fold increase in bulk modulus, implying a significant increase in bonding strength.

58 GEOSCIENCES↗
DOE OSTI2021

Potential design problems for ITER fusion device

The international thermonuclear experimental reactor (ITER) is a worldwide project currently being built in France for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. ITER is of the tokamak based design using strong magnetic fields to confine the very hot plasma needed to induce the fusion reaction. Tokamak devices are currently the front leading designs. Building a successful magnetic fusion device for energy production is of great challenge. A key obstacle to such design is the performance during abnormal events including plasma disruptions and so-called edge-localized modes (ELMs). In these events, a massive and sudden release of energy occurs quickly, due to loss of full or partial plasma confinement, leading to very high transient power loads on the reactor surface boundaries. A successful reactor design should tolerate several of these transient events without serious damages such as melting and vaporization of the structure. This paper highlights, through comprehensive state-of-the-art computer simulation of the entire ITER interior design during such transient events, e.g., ELMs occurring at normal operation and disruptions during abnormal operation, potential serious problems with current plasma facing components (PFCs) design. The HEIGHTS computer package is used in these simulations. The ITER reactor design was simulated in full and exact 3D geometry including all known relevant physical processes involved during these transient events. The current ITER divertor design may not work properly and may requires significant modifications or new innovative design to prevent serious damage and to ensure successful operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Characteristics of Ultralow Aspect Ratio Toroidal Plasmas and Non-Solenoidal Startup and Edge Stability Studies at Near-Unity Aspect Ratio (Final Report)

This grant supported a long-term research and development program to explore the physics and technology of spherical tokamak (ST) plasma behavior at near-unity aspect ratio ( A ). The PEGASUS Toroidal Experiment is a university-scale ( R ) ~ 0.40 m, α ~ .35 m, I p ≤ 0.3 MA, B T ≤ 0.15 T) experiment that accesses A → 1, to provide large values of the normalized plasma current, I N = I p /α B T , or equivalently the toroidal field utilization factor I p / I TF . The research activities focused on: 1) developing the technique of Local Helicity Injection (LHI) as a viable means of initiating and growing an ST plasma without the use of a central solenoid; 2) exploring the equilibrium and stability properties of spherical tokamak plasmas at extremely low aspect ratio; and 3) obtaining new insights in the properties of the enhanced confinement H-mode regime at A ~ 1. The initial (Phase I) facility employed a unique high-stress central solenoid Ohmic for current drive and heating with simple magnet current waveforms. A subsequent major upgrade (Phase II) offered more flexible control of the plasma evolution along with a powerful LHI system for plasma initiation, heating and sustainment. The LHI technique consists of injection of high-density current streams into vacuum toroidal and vertical magnetic fields. These streams become unstable and support magnetic reconnection to allow the system to relax into a tokamak-like magnetic configuration. This program focused on: 1) development of electron current sources that provide sufficiently high injection currents in the challenging edge plasma region; 2) validation of theoretical limits to achievable I p arising from magnetic helicity and energy conservation plus absolute limits arising from relaxation to a minimal energy states; 3) tests of a power balance model to describe the evolution of the plasma current I p (t); and 4) study of magnetic fluctuations and their role in the I p evolution. This culminated in the production of toroidal currents of I p ≥ 0.2 MA with only ~8 kA of injected current. Operation with Ohmic induction alone in Phase I created plasmas with soft limits on the achievable I p and field utilization ( I p / I TF ~ 1) due to the onset of large low-order (2/1 or 3/2) internal resonant tearing modes. With the expanded capabilities in Phase II operation, methods employed to mitigate those modes and achieve I p / I TF > 1 were: 1) I TF ramp-downs; 2) non-solenoidal startup via LHI; and 3) extremely low I TF Ohmic operations assisted by LHI current injector pre-ionization. Extensive use of LHI-driven startup and drive for non-solenoidal operation produced favorable current profiles to stably operate tokamak plasmas with unprecedentedly high I N = I p / aB T ~ 15 and I p / I TF > 2. With strong reconnection-driven anomalous ion heating, this in turn provided access to tokamak plasmas with B t up to 100%, a world record 2 times higher than that previously achieved in advanced or spherical tokamaks. This high B t regime had a large fraction (~50%) of the plasma volume in a region of an absolute minimum- B configuration. The MHD stability limit in this regime was the ideal external kink mode without a stabilizing wall. These results provided the first demonstration of access to tokamak plasmas with very high B t , high i N , high elongation κ, and low internal inductance ℓ i , and as such served as a proof-ofprinciple for access to this long-sought ST regime. The naturally low B T needed for stability at A ≤ 1.2 reduces the L-H mode power threshold, P LH , so that H-mode plasmas were achieved with Ohmic heating alone. The power threshold for the transition to the H-mode regime was found to be 10× the accepted values from the ITER international scaling, confirming initial trends indicated by experiments on MAST and NSTX, and suggesting that the physics behind this transition is not yet fully understood. The density dependence of the transition and the observed insensitivity to whether the plasma is bounded by a limiter or magnetic divertor are consistent with the recent FM 3 model. Multiple unstable toroidal magnetic modes were measured during ELM (Edge Localized Mode) crashes, with generally lower toroidal mode numbers than seen at higher A , which was attributed to the larger peeling mode instability drive at low A . First-ever edge current profile measurements through an ELM crash showed current-carrying filaments were generated, as seen in ELM simulations and in electromagnetic blob transport theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Dispenser Reliability: Materials R&D. A Hydrogen Fueling Infrastructure Research and Station Technology (H2FIRST) Report

Dispensers are the top cause of maintenance events and down-time at hydrogen fueling stations. In an effort to help characterize and enable improvements in dispenser reliability, an extensive accelerated lifetime testing set-up was designed and built at NREL involving components typically part of dispensing operations at fueling stations. Device Under Test (DUTs) included different components such as normally open valves, normally closed valves, fueling nozzles, breakaways devices and filters. Conditions of testing included pressures, and flow rates similar to light duty fuel cell electric vehicles fueling at -40°C, and -20°C for thousands of cycles in hydrogen. Tested components (failed and non-failed) were disassembled at SNL and polymeric O-rings were carefully retrieved and cataloged for chemical and physical characterization. Data collected was compared to similar O-rings from unexposed or non-tested components for hydrogen effects, and failure modes. Degradation analyses, based on select polymer chemistries common across all component types, their location within components, visual assessment of damage coupled with strong hydrogen effects from chemical characterization, was completed and presented to NREL and DOE. Overall, the failure rate amongst the components was not as high as expected for the test conditions. Among the component types tested, breakaways were the most susceptible to damage under these test conditions, with fueling nozzles a close second. The proper combination of selection of the right polymer and optimum component design was found to make a strong difference in component reliability under severe dispenser operating conditions. Physical degradation of polymers, rather than chemical changes due to low temperature hydrogen exposure, is more prevalent as failure mode for these test conditions. The nature and the extent of the degradation was much less at -20°C as compared to -40°C. The damage and failure rates were higher at lower temperatures than at higher test temperatures. As expected, increasing the number of cycles at the lowest test temperature (-40°C) increased damage. This indicates that cycling at the low temperature of -40°C required by SAE J2601 can reduce component life in fuel dispensing operations

08 HYDROGEN↗
DOE OSTI2021

The effect of curvature induced broken potential vorticity conservation on drift wave turbulences

Abstract The correlation theory of turbulence suppression (Zhang and Mahajan 1993 Phys. Fluids B5 2000) by velocity shear was constructed by invoking the ansatz of potential vorticity conservation (PVC) that holds for relatively simple (slab) models of drift wave turbulence. It is, therefore, surprising that a detailed modern simulation of the H mode pedestal, using the gyrokinetic code GENE (Hatch et al 2018 Plasma Phys. Control. Fusion 60 084003), found ‘striking agreement’ with the predictions of the analytic model. To understand the reasons for this remarkable agreement, an extended theory that contains finite (magnetic) curvature, and which does not conserve potential vorticity, is developed and ‘solved’ by calculating an inhomogeneous Green function reflecting the fact that the new system has a potential vorticity source. It is, then, demonstrated that the effect of the broken PVC is insignificant for the normal operation parameters in tokamaks; the correction due to curvature is at the order of 2 L 0 / R , where L 0 is the scale length of the local gradient and R is the major radius. The excellent agreement between simulation and slab model 1993 theory is therefore not accidental; the latter can be applied with confidence to the tokamak pedestal.

Physics↗
DOE OSTI2022

Theory of disordered superconductors with applications to nonlinear current response

I present a review of the theory and basic equations for charge transport in superconducting alloys starting from the Keldysh formulation of the quasiclassical transport equations developed by Eilenberger, Larkin and Ovchinnikov, and Eliashberg. This formulation is the natural extension of Landau’s theory of normal Fermi liquids to the superconducting state of strongly correlated metals. For dirty metals the transport equations reduce to equations for charge diffusion, with the current response given by the Drude conductivity at low temperatures. The extension of the diffusion equation for the charge and current response of a strongly disordered normal metal to the superconducting state yields Usadel’s equations for the nonequilibrium quasiclassical Keldysh propagator. The conditions for the applicability of the Usadel equations are discussed, the pair-breaking effect of disorder on the current response, including the nonlinear current response to an electromagnetic field in the dirty limit, τ ≪ ℏ/Δ, are reported. The same nonlinearity is shown to lead to source currents for photon generation and nonlinear Kerr rotation driven by the nonlinear response to excitation of the superconductor by a multi-mode electromagnetic field. The potential relevance of the nonlinear source currents to superconducting radio-frequency cavities as detectors of axion-like dark matter candidates is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Virtual Agents-Based Attack-Resilient Distributed Control for Islanded AC Microgrid

Due to its dependence on a communication network, distributed secondary control of microgrids is susceptible to denial-of-service (DoS) attacks in channel shutdown mode, which may negatively impact the network connectivity and thus deteriorate the coordination and power sharing among distributed generators (DGs). Honeypot is a common method for cyber deception by introducing fake targets. However, in the context of microgrid, the misleading information spread by honeypots will also impact the system performance. This paper proposes an attack-resilient distributed control for AC microgrids utilizing virtual agents (VAs) to counteract both DoS edge and node attacks. The VAs are designed to not impact the system’s steady state during normal operation but to share information among neighboring real agents and serve as dummy targets for DoS attacks. The control with VAs is implemented by a primal-dual gradient based distributed algorithm to efficiently obtain a practical solution for voltage/frequency regulation and power sharing. The simulation results on a 4-DG test system and a modified IEEE 34-bus system show that 1) VAs do not impact the normal functionality of the test system, and 2) deploying VAs can enhance the resilience of the microgrid control against DoS edge and node attacks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Pedestal main ion particle transport inference through gas puff modulation with experimental source measurements

Abstract Transport in the DIII-D high confinement mode (H-mode) pedestal is investigated through a periodic edge gas puff modulation (GPM) which perturbs the deuterium density and source profiles. By using absolutely calibrated experimental edge ionization profile measurements, radial profiles of diffusion ( D ) and convection ( v ) are calculated into the pedestal region without depending on modeling the edge ionization source. An analytic approach with closed-form expressions for the D and v profiles and a more advanced Bayesian approach show evidence of an inward particle convection on the order of 1 m s −1 extending to normalized poloidal flux ( Ψ N ) of 0.98. Meanwhile, diffusion reaches a minimum value of ( 0.03 ± 0.02 ) m 2 s −1 in the pedestal region. Notably, the Bayesian approach, which utilizes the Aurora 1.5 D forward model inside the IMPRAD OMFIT module, provides radially resolved transport profiles with associated uncertainty without requiring an explicit form for the perturbation to the density profile or source. The combination of experimental ionization measurements and Bayesian inference provides an enhanced robust framework for investigating edge particle transport coefficients to experimentally test transport physics in order to improve predictive capabilities in the tokamak edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Dimensionless parameter scaling of intrinsic torque in C-Mod enhanced confinement plasmas

A dimensionless parameter dependence study of intrinsic torque has been performed on a database of H- and I-mode plasmas from the Alcator C-Mod tokamak. Here, the torque was determined by comparing intrinsic angular momentum density profiles just before and just after L–H and L–I transitions. The intrinsic torque has been found to scale as ${\beta }_{N}^{ 1.5}\enspace {\rho }_{{\ast}}^{-1.0}\enspace {\nu }_{{\ast}}^{0.1}$, with the parameter ranges 0.3 $\leqslant$ β N $\leqslant$ 1.5, 0.004 $\leqslant$ ρ* $\leqslant$ 0.011 and 0.04 $\leqslant$ ν * $\leqslant$ 0.9. Comparison with results from JET and DIII-D suggests that the intrinsic torque should be normalized by some measure of the device size. Depending upon this normalization, the estimated total intrinsic torques for ITER, SPARC and ARC are ~20, ~4 and ~8 Nm, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Density of States and Spectral Function of a Superconductor out of a Quantum-Critical Metal

We analyze the validity of a quasiparticle description of a superconducting state above a metallic quantum-critical point (QCP). A normal state at a QCP is a non-Fermi liquid with no coherent quasiparticles. A superconducting order gaps out low-energy excitations, except for a sliver of states for non-s-wave gap symmetry, and at a first glance, restores coherent quasiparticle behavior. We argue that this does not necessarily hold as the fermionic self-energy may remain singular above the gap edge. This singularity gives rise to markedly non-BCS behavior of the density of states and to the appearance of a nondispersing mode at the gap edge in the spectral function. We analyze the set of quantum-critical models with an effective dynamical four-fermion interaction V(Ω) ∝ 1/Ω γ , where Ω is a frequency of a boson, which mediates the interaction. We show that coherent quasiparticle behavior in a superconducting state holds for γ < 1/2, but breaks down for larger γ. Here, we discuss signatures of quasiparticle breakdown and compare our results with the photoemission data for Bi2201 and Bi2212.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Measurement of the 𝐷 0 →𝐾 − ⁢𝜋 + ⁢𝑒 + ⁢𝑒 − branching fraction and search for 𝐷 0 → 𝜋 + ⁢𝜋 − ⁢𝑒 + ⁢𝑒 − and 𝐷 0 →𝐾 + ⁢𝐾 − ⁢𝑒 + ⁢𝑒 − decays at Belle

We present a study of the rare charm meson decays 𝐷 0 →𝐾 + ⁢𝐾 − ⁢𝑒 + ⁢𝑒 − , 𝜋 + ⁢𝜋 − ⁢𝑒 + ⁢𝑒 − , and 𝐾 − ⁢𝜋 + ⁢𝑒 + ⁢𝑒 − using a 942 fb −1 dataset collected by the Belle detector at the KEKB asymmetric-energy 𝑒 + ⁢𝑒 − collider. We identify 𝐷 0 candidates via the charge of the pion from 𝐷* + →𝐷 0 ⁢𝜋 + decays and normalize the branching fractions to 𝐷 0 → 𝐾 − ⁢𝜋 + ⁢𝜋 − ⁢𝜋 + decays. The branching fraction for decay 𝐷 0 → 𝐾 − ⁢𝜋 + ⁢𝑒 + ⁢𝑒 − is measured to be (39.6 ± 4.5 (stat) ± 2.9 (syst)) × 10 −7 , with the dielectron mass in the 𝜌/𝜔 mass region 675 < 𝑚 𝑒⁢𝑒 < 875 MeV/⁢𝑐 2 . We also search for 𝐷 0 → ℎ − ⁡ℎ (′)+ ⁡𝑒 + ⁢𝑒 − (ℎ (′) = 𝐾, 𝜋) decays with the dielectron mass near the 𝜂 and 𝜙 resonances, and away from these resonances for the 𝐾 + ⁢𝐾 − ⁢𝑒 + ⁢𝑒 − and 𝜋 + ⁢𝜋 − ⁢𝑒 + ⁢𝑒 − modes. For these modes, we find no significant signals and set 90% confidence level upper limits on their branching fractions at the 𝒪⁡(10 −7 ) level.

branching fraction↗
DOE OSTI2023

Impact of β n and spectrum of n = 1 applied fields on fast ion losses in DIII-D

Abstract The effect of n = 1 magnetic perturbations (MPs) on prompt fast ion losses in DIII-D has been investigated using the light ion beam probe technique. The effect of normalized beta, β n , and the plasma response to the MPs is studied for several MP spectra. Magnetics data show a strong dependence of plasma response to β n that depends on the phase difference in perturbation coils, Δ ϕ U L . For most phases, the response increases with β n , however, the response is suppressed for phases between 180 ∘ and 240 ∘ . Experimental data from scintillator based fast ion loss detectors shows that relative fluctuation of lost ions (20%–30% of the steady signal) does not diminish across the L- to H-mode transition for Δ ϕ U L = 240 ∘ , despite the 34% decrease in radial response field and 50% decrease in poloidal response field. Simulations of the DIII-D discharges using M3D-C1 and ASCOT5 find that prompt losses from neutral beam injection in each investigated case hit the first wall at several concentrated locations: the vessel floor, midplane diagnostic ports, vessel ceiling, and inner wall. Simulated losses from co-injection neutral beams are born outside the last closed flux surface, corresponding to radial orbit displacements of 3–6 cm due to the MPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

On a Spectral Method for β -particle Bound Excitation Collisions in Kilonovae

The interaction of β-particles with the weakly ionized plasma background is an important mechanism for powering the kilonova (KN) transient signal from neutron star mergers. For this purpose, we present an implementation of the approximate fast-particle collision kernel, described by Inokuti following the seminal formulation of Bethe, in a spectral solver of the Vlasov–Maxwell–Boltzmann equation. In particular, we expand the fast-particle plane-wave atomic excitation kernel into coefficients of the Hermite basis, and derive the relevant discrete spectral system. In this fast-particle limit, the approach permits the direct use of atomic data, including optical oscillator strengths, normally applied to photon–matter interaction. The resulting spectral matrix is implemented in the MASS-APP spectral solver framework, in a way that avoids full matrix storage per spatial zone. We numerically verify aspects of the matrix construction, and present a proof-of-principle 3D simulation of a 2D axisymmetric KN ejecta snapshot. Our preliminary numerical results indicate that a reasonable choice of Hermite basis parameters for β-particles in the KN is a bulk velocity parameter u = 0, a thermal velocity parameter α = 0.5c, and a 9 × 9 × 9 mode velocity basis set (Hermite orders of 0–8 in each dimension). For interior-ejecta sample zones, we estimate that the ratio of thermalization from large-angle (≳2fdg5) bound excitation scattering to total thermalization is ~0.002–0.003.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Plasma-Enhanced Atomic Layer Deposition Synthesis of Nanolayered Molybdenum Diselenide (MoSe 2 ) Thin Films for Nanoelectronics

Nanolayered molybdenum diselenide (MoSe 2 ) thin films were synthesized by plasma-enhanced atomic layer deposition (PE-ALD) using molybdenum pentachloride (MoCl 5 ) and diethyldiselenide (C 4 H 10 Se 2 ) precursors. Scanning and transmission electron microscopy revealed horizontally stacked nanolayers near the substrate and vertically oriented nanosheets at the surface of the film. X-ray diffraction confirmed the (002), (100), and (110) reflections of crystalline MoSe 2 , while X-ray photoelectron spectroscopy showed relative atomic concentrations of 33.5% Mo and 66.5% Se, consistent with stoichiometric MoSe 2 . Raman spectra exhibited characteristic E 1g , A 1g , and E$^1_{2g}$ vibrational modes. Field-effect transistors incorporating PE-ALD-grown MoSe 2 as the channel material displayed p-type behavior, demonstrating the potential of nanolayered MoSe 2 for nanoelectronic applications. This work demonstrates the feasibility of low-temperature, stoichiometric growth of nanolayered MoSe 2 by PE-ALD and its direct integration into transistor architectures.

36 MATERIALS SCIENCE↗