Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NMC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Controlled lithium stripping enables a stable interface for long-cycling anode-free solid-state batteries

Anode-free solid-state batteries (AFSSBs) are a promising route toward achieving high energy density. In these cells, the anode contains no pre-stored lithium (Li). Instead, the entire Li inventory originates from the cathode and is freshly deposited onto a bare current collector during charging. However, achieving uniform and defect-free Li plating on this bare current collector remains a major challenge, often resulting in low Li plating/stripping efficiency and rapid capacity decay. Here, for the first time, operando neutron imaging is employed to visualize Li plating/stripping behavior in an anode-free full cell with LiNi0.82Mn0.07Co0.11O2 (NMC) as the cathode. Operando measurements reveal that complete stripping of Li leaves isolated Li residues on the current collector, which degrades the interfacial contact between the current collector and the solid-state electrolyte. To mitigate this interfacial issue and promote more uniform Li deposition, we implement a discharge-cutoff-voltage strategy that intentionally retains a thin residual Li layer after stripping. This preserved Li-containing interfacial reservoir not only improves interfacial contact but also serves as an in situ formed seed layer that enables more homogeneous subsequent Li plating. As a result, the optimized anode-free cell with limited stripping depth exhibits excellent long-term cycling stability, maintaining a discharge capacity of 112.1 mAh g−1 with a capacity retention of 80.6% and an average coulombic efficiency of approximately 99.9% after 500 cycles at 0.25 C. In contrast, the cell with a conventional discharge cutoff voltage of 2.8 V exhibits rapid capacity decay, retaining only 59.7 mAh g−1 after 50 cycles with a capacity retention of 40.7%. This work demonstrates that limiting deep stripping to preserve a thin Li-containing interfacial layer can effectively improve the cycling stability of sulfide-based AFSSBs.

Wang, Jiwei [Northeastern University, Boston]↗

Direct electrode-to-electrode regeneration of end-of-life batteries via electrode–electrolyte interphase dissolution

Lithium-ion battery recycling remains constrained by processes that recover metals at the expense of electrode integrity, while even direct recycling typically requires shredding to black mass followed by binder removal, separation, and full electrode refabrication. Here, we introduce direct electrode-to-electrode regeneration (DEER), a simultaneous electrochemical regeneration of used NMC and graphite electrodes from end-of-life batteries in their intact form by dissolving the passivating electrode–electrolyte interphase (EEI). DEER employs 1,3-dimethyl-2-imidazolidinone (DMI), a high donor number solvent that creates a thermodynamic environment favorable for solubilizing redox inactive EEI components. DEER dissolves the thick EEI on both used electrodes while preserving electrode integrity, enabling up to 95% capacity regain and improved cycling stability with a residual LiF-rich interphase. Operando Raman, operando IR, and post-mortem NMR directly track the electrochemically driven dissolution of carbonate-derived EEI species in the used DMI-based recycling electrolyte. Technoeconomic and life-cycle analyses show that DEER reduces the cost of recycled cell manufacturing by 56% relative to pyro- and hydrometallurgy, while lowering energy use and greenhouse gas emissions. Overall, DEER establishes the first validated pathway to directly regenerate and reuse electrodes harvested from truly end-of-life batteries, converting the key interfacial bottleneck into a controllable dissolution process and opening a practical route toward electrode level circularity.

Kim, Kiwon [Cornell Univ., Ithaca, NY (United Stat↗

Electrically-detected ESR in silicon nanostructures inserted in microcavities

We present the first findings of the new electrically-detected electron spin resonance technique (EDESR), which reveal the point defects in the ultra-narrow silicon quantum wells (Si-QW) confined by the superconductor δ- barriers. This technique allows the ESR identification without application of an external cavity, as well as a high frequency source and recorder, and with measuring the only response of the magnetoresistance, with internal GHz Josephson emission within frameworks of the normal-mode coupling (NMC) caused by the microcavities embedded in the Si-QW plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetically oriented nanosheet interlayer for dynamic regeneration in lithium metal batteries

Lithium (Li) metal has been recognized as a promising anode to advance the energy density of current Li-based batteries. However, the growth of the solid–electrolyte interphase (SEI) layer and dendritic Li microstructure pose significant challenges for the long-term operation of Li metal batteries (LMBs). Herein, we propose the utilization of a suspension electrolyte with dispersed magnetically responsive nanosheets whose orientation can be manipulated by an external magnetic field during cell operation for realizing in situ regeneration in LMBs. The regeneration mechanism arises from the redistribution of the ion flux and the formation of an inorganic-rich SEI for uniform and compact Li deposition. With the magnetic-field-induced regeneration process, we show that a Li||Li symmetric cell stably operates for 350 h at 2 mA cm −2 and 2 mA h cm −2 , ~5 times that of the cell with the pristine electrolyte. Furthermore, the cycling stability can be significantly extended in the Li||NMC full cell of 3 mA h cm −2 , showing a capacity retention of 67% after 500 cycles at 1C. The dynamic Li metal regeneration demonstrated here could bring useful design considerations for reviving the operating cells for achieving high-energy, long-duration battery systems.

Ju, Zhengyu↗

On the scale of heterogeneity in composite electrodes of batteries

An electrode in cylindrical or pouch cell batteries contains millions of active particles embedded in a conductive network. Battery performance, such as voltage, capacity, and cyclic efficiency, is a collective response of the particle network. We use optical microscopy to measure the local, heterogeneous state of charge of individual particles upon charging and discharging. The optical reflectivity is proportional to Li composition in the ternary oxide LiNi x Mn y Co z O 2 (NMC) cathode. Through clustering analysis, we determine the scale of heterogeneity where a representative volume in the composite electrode contains 100 to 1,000 particles. The heterogeneous activity in the particle network can be described by Weibull defect population at the particle interface with the conductive matrix.

batteries↗

Determination of proton PDF uncertainties with Markov chain Monte Carlo

We present an analysis of parton distribution functions (PDFs) of the proton using Markov chain Monte Carlo (MCMC) methods. The MCMC approach naturally implements Bayes’ theorem and, thus, provides a means to directly sample the underlying probability distribution—in this case, the probability distribution of the PDF parameters. This allows for a straightforward propagation of the resulting uncertainties into any PDF-dependent observable, preserving their simple probabilistic interpretation. In our analysis we include a broad set of deep inelastic scattering data from HERA, BCDMS and NMC experiments along with the Drell-Yan, 𝑊 and 𝑍 boson data from LHC and Tevatron experiments, which combined with theoretical calculations at next-to-next-to-leading order in QCD allow for realistic determination of PDFs. The main focus of this analysis is to explore alternative methods for PDF uncertainty estimation that are more firmly grounded in statistical principles. We show that the flexibility of the Bayes framework, allowing one, e.g., to account for non-Gaussianity or inconsistencies of datasets, is crucial to extract realistic uncertainties when such assumptions are not fulfilled. We also demonstrate that MCMC allows one to determine the Δ⁢𝜒 2 value corresponding to a given confidence level in the sample, which can, in turn, be used as a statistically well-founded tolerance criterion used in the Hessian method, thus addressing one of its main long-standing drawbacks.

Risse, Peter Clemens [Universität Münster (Germany↗

Contributions of radiative gluons and vector mesons to the F{sub 2} structure function

We calculate unpolarized quark distribution functions and F{sub 2} structure functions for the proton and the neutron. The calculation is preformed in the light-cone frame. For the bare nucleon three different distributions--namely, spin-0 diquark, spin-0 plus spin-1 diquark, and no diquark models--have been used. Using perturbative QCD an initial gluon distribution is generated inside the core nucleon. The physical nucleon is assumed to be a superposition of the bare nucleon plus virtual light-cone Fock states of baryon octets and baryon decuplets along with the corresponding pseudoscalar mesons and vector mesons. The initial distributions are evolved. The F{sub 2} structure functions are calculated from the evolved distributions and it is shown that they are in reasonable agreement with the NMC and ZEUS results along with a CTEQ6M fit. Also, it is shown that the meson cloud is a major contributing factor to the sea quark asymmetry and one needs both pseudoscalar mesons and vector mesons to account fully for Gottfried sum rule violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

QCD coupling constant at next-to-next-to-leading order from DIS data

Deep inelastic scattering data on F{sub 2} structure function from various fixed-target experiments were analyzed in the nonsinglet approximation with a next-to-next-to-leading-order accuracy. The study of high statistics deep inelastic scattering data provided by BCDMS, SLAC, NMC, and BFP Collaborations was carried out separately for the first one and the rest, followed by a combined analysis done as well. For the coupling constant the following value {alpha}{sub s}(M{sub Z}{sup 2})=0.1167{+-}0.0021(total exp error)+((+0.0056/-0.0036)(theor) was found, which in this approximation turns out to be slightly less than that obtained at the next-to-leading order, as was generally anticipated. Ditto the theoretical uncertainties reduced with respect to those obtained in the case of the next-to-leading-order analysis, thus confirming earlier observations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nucleon and nuclear structure functions with nonperturbative and higher order perturbative QCD effects

We have studied the nucleon structure functions F EM iN (x,Q 2 ), i = 1, 2, by including contributions due to the higher order perturbative QCD effect up to next-to-next-to-leading order (NNLO) and the nonperturbative effects due to the kinematical and dynamical higher twist (HT) effects. The numerical results for F EM iN (x,Q 2 ) are obtained using Martin, Motylinski, Harland-Lang, Thorne 2014 NLO and NNLO nucleon parton distribution functions (PDFs). The dynamical HT correction has been included following the renormalon approach as well as the phenomenological approach, and the kinematical HT effect is incorporated using the works of Schienbein et al. These nucleon structure functions have been used as an input to calculate the nuclear structure functions F EM iN (x,Q 2 ). In a nucleus, the nuclear corrections arise because of the Fermi motion, binding energy, nucleon correlations, mesonic contribution, and shadowing and antishadowing effects. These nuclear corrections are taken into account in the numerical calculations to obtain the nuclear structure functions F EM iN (x,Q 2 ), for the various nuclear targets such as 12 C, 27 Al, 56 Fe, 64 Cu, 118 Sn, 197 Au, and 208 Pb which are of experimental interest. The effect of isoscalarity correction for nonisoscalar nuclear targets has also been studied. The results for the F EM iN (x,Q 2 ) are compared with nCTEQ nuclear PDFs parametrization as well as with the experimental results from JLab, SLAC, and NMC in the kinematic region of 0.1 ≤ x ≤ 0.8 for several nuclei. We have also calculated the ratio R A (x,Q 2 ) = F 2A (x,Q 2 )/2x F 1A (x,Q 2 ) in the moderate Q 2 region for various nuclei and compared the results with the available experimental data from JLab to examine the validity of the Callan-Gross relation in the nuclei. We also make predictions for the nuclear structure functions in 12 C, 64 Cu, and 197 Au in the kinematic region of the proposed experiment at JLab.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of Active Life Balancing to Recondition Li-ion Battery Packs for 2nd Life

An investigation is presented into the application of active life balancing battery management systems to recondition inhomogeneous Li-ion battery packs and achieve homogeneity in capacity for second life. This paper proposes a life balancing objective map, which controls the state of charge references for each cell in a battery pack based on its capacity relative to other cells. The impacts of life balancing objective maps on the reconditioning time and overall pack capacity fade are considered. Moreover, the proposed approach accounts for various load and environmental effects, including depth-of-discharge, battery pack temperature, number of cycles per day, and cells’ resting time at various states of charge. The study results in a battery pack with convergent capacities achieved in minimal time, while curtailing overall capacity fade. Simulation results for a battery pack with sixteen series connected 75 Ah Kokam NMC cells with 3.6% initial capacity imbalance are presented, indicating a reconditioning time of 1.34 months with a final capacity imbalance of 0.1% and an overall capacity fade of 0.005%.

47 OTHER INSTRUMENTATION↗

Advanced Cell-Level Control for Extending Electric Vehicle Battery Pack Lifetime

A cell-level control approach for electric vehicle battery packs is presented that enhances traditional battery balancing goals to not only provide cell balancing but also achieve significant pack lifetime extension. These goals are achieved by applying a new life-prognostic based control algorithm that biases individual cells differently based on their state of charge, capacity and internal resistance. The proposed life control approach reduces growth in capacity mismatch typically seen in large battery packs over life while optimizing usable energy of the pack. The result is a longer lifetime of the overall pack and a more homogeneous distribution of cell capacities at the end of the first life for vehicle applications. Active cell balancing circuits and associated algorithms are used to accomplish the cell-level life extension objectives. This paper presents details of the cell-level control approach, selection and design of the active balancing system, and low-complexity state-of-charge, capacity, and series-resistance estimation algorithms. A laboratory prototype is used to demonstrate the proposed control approach. The prototype consists of twenty-one 25 Ah Panasonic lithium-Ion NMC battery cells from a commercial electric vehicle and an integrated BMS/DC-DC system that provides 750 W to the vehicle low voltage auxiliary loads.

25 ENERGY STORAGE↗

Active Reconditioning of Retired Lithium-ion Battery Packs from Electric Vehicles for Second Life Applications

Utilizing the remaining capacity in retired lithium-ion (Li-ion) batteries from electric vehicles (EVs) for second-life applications has shown economic and environmental benefits. However, achieving homogeneity among the capacities of cells before their second life is critical to exploit the benefits. This article proposes a new active reconditioning approach with the potential to make short-term reconditioning of batteries before second life feasible. A control objective map determines each cell's state-of-charge (SOC) operating window based on its capacity relative to other cells. The SOC reference translates into distinct differential currents through the cells, wherein the higher-capacity cells undergo more frequent and deep charge and discharge cycles than their lower-capacity counterparts. The proposed solution achieves capacity homogeneity within the battery pack with low reconditioning time and minimal fade in the overall pack capacity. The feasibility of the reconditioning approach under varying load and environmental conditions is assessed through simulations, encompassing factors such as the number of cycles per day, depth-of-discharge, battery pack temperature, and cell resting time at different SOCs. Furthermore, the simulation model employs a battery pack with sixteen series-connected 75 Ah Kokam lithium nickel manganese cobalt oxide (NMC) cells with a 3.6% initial capacity imbalance. A reconditioning time of 1.3 months is achieved with a final capacity imbalance of 0.1% and an overall capacity fade of 0.005%, thereby confirming the viability of the reconditioning process. Moreover, experimental validation using eight retired battery cells from a Nissan Leaf demonstrates a substantial decrease in the capacity imbalance of cells from 9.4% to 2.15% within 78 days, effectively affirming the efficacy of the proposed reconditioning scheme.

25 ENERGY STORAGE↗

Preparing Li-garnet electrodes with engineered structures by phase inversion and high shear compaction processes

We report solid-state lithium batteries are promising for safety and energy density com-pared with traditional lithium-ion batteries. However, the large interfacial resistance between the electrode and electrolyte is a bottleneck to achieving high-performance solid-state batteries. Engineered electrode structures with a porous scaffold of the solid electrolyte material are promising to lower the interfacial resistance and provide a mechanical support for a thin solid electrolyte layer. In this work, two ceramic processing techniques are used to fabricate porous/dense bilayer architectures based on a Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Li-garnet material. Finger-like vertically aligned pores are created by the phase inversion (PI) process. A water bath presaturated with Li salt prevents Li loss during the PI solvent exchange step. Pore size and porosity can be optimized by adjusting the bath temperature. The high shear compaction process was used to prepare LLZO tapes with 40, 60, and 80 vol% poreformer. The porosity of the tapes after sintering is 39.5%, 58.4%, and 75.4%, respectively. Microtomography exhibits the porosity, pore shape, and pore distribution of the tapes. A typical cathode material LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC) is filled into the pores via vacuum infiltration, and a dense cathode layer is formed within the garnet scaffold.

25 ENERGY STORAGE↗

A High-Ceramic-Loading LATP–PVDF–Al 2 O 3 Composite Film for Lithium-Ion Batteries With Favorable Porous Microstructure and Enhanced Thermal Stability

A separator plays a crucial role in a Li-ion battery to carry liquid electrolytes while preventing short-circuiting between electrodes. Nevertheless, conventional commercial separators often exhibit poor wettability and are prone to shrink at elevated temperatures due to their limited thermal stability. Herein, we report a heat-resistant LATP–PVDF–Al 2 O 3 composite film with outstanding wetting performance. The thin film was prepared using ball mill mixing and tape-casting processes. Two solvents, NMP and glycerol, were applied to prepare the slurry, and a favorable microstructure in the film was created after drying. Here, the ionic conductivity of the film was tested at 1.39 mS cm –1 when paired with liquid electrolyte, almost double that of the commercial counterpart. The high ceramic loading of 70% improved both the thermal shrinkage resistance and dendrite inhibition of the membrane. When assembled in an NMC half-cell, the cycling capacity retentions of 92.8% and 92.1% are achieved after 50 cycles at 0.5 C and 1 C, demonstrating its capability to be used in Li-ion batteries.

25 ENERGY STORAGE↗

Analytic and 'frozen' coupling constants in QCD up to NNLO from DIS data

Deep inelastic scattering data on the F{sub 2} structure function provided by the BCDMS, SLAC, and NMC Collaborations are analyzed in the nonsinglet approximation with the analytic and 'frozen' modifications of the strong-coupling constant featuring no unphysical singularity (the Landau pole). Improvement of agreement between theory and experiment, with respect to the case of the standard perturbative definition of {alpha}{sub s} considered recently, is observed and the higher-twist terms are shown to reduce at the next-to-next-to-leading order accuracy thus confirming earlier studies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Functions of the nucleon structure and determination of the strong coupling constant

The properties of deep inelastic scattering at high energies, as well as results of fitting of experimental data on structure functions, obtained by BCDMS, SLAC, NMC, and BFP collaborations in fixed target experiments, with the aim of determining the strong coupling constant, the shape of parton distributions, and power corrections to F{sub 2}(x, Q {sup 2}), are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analyzing and Minimizing Capacity Fade through Optimal Model-Based Control - Theory and Experimental Validation

In order to significantly expand the BEV market, and to increase the use of lithium-ion batteries in electric grids, there is a need to develop optimal charging strategies to utilize the batteries more efficiently and enable longer life. Advanced battery management systems that can calculate and implement such strategies in real time are expected to play a critical role for this purpose. This article investigates different approaches for determining model-based optimal charging profiles for batteries, and experimentally validates the gain obtained using such profiles. Optimal profiles that maximize the cycle life of the cells are implemented on 16 Ah NMC cells for 30 minutes of charge followed by 5C discharge, and the cycle life is compared to a standard 2C CC-CV charge and 5C discharge. An improvement of more than 100% in cycle life is observed experimentally, for our test conditions on this cell design. This study is the first to experimentally demonstrate that the improved extra knowledge obtained by sophisticated physics-based models results in significant improvements in battery performance when employed in a real time control algorithm.

25 ENERGY STORAGE↗