Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLECULAR DISSOCIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Electron-temperature dependence of dissociative recombination of electrons with CO/+/./CO/n-series ions

The dependence on electron temperature of the coefficients for electron recombination with molecular cluster ions of the carbon monoxide series, CO(+).(CO)n, is determined. A microwave discharge lasting approximately 0.1 msec was applied in 5-20 Torr neon containing a few tenths percent CO in an afterglow mass spectrometer apparatus, and the time histories of the various afterglow ions were measured. Expressions for the dependence of the recombination coefficients of the dimer and trimer ions CO(+).CO and CO(+).(CO)2 are obtained which are found to be significantly different from those previously obtained for hydronium and ammonium series polar cluster ions, but similar to those of simple diatomic ions.

Whitaker, M.↗
NASA NTRS1987

The study of excited oxygen molecule gas species production and quenching on thermal protection system materials

The detection of excited oxygen and ozone molecules formed by surface catalyzed oxygen atom recombination and reaction was investigated by laser induced fluorescence (LIF), molecular beam mass spectrometric (MBMS), and field ionization (FI) techniques. The experiment used partially dissociated oxygen flows from a microwave discharge at pressures in the range from 60 to 400 Pa or from an inductively coupled RF discharge at atmospheric pressure. The catalyst materials investigated were nickel and the reaction cured glass coating used for Space Shuttle reusable surface insulation tiles. Nonradiative loss processes for the laser excited states makes LIF detection of O2 difficult such that formation of excited oxygen molecules could not be detected in the flow from the microwave discharge or in the gaseous products of atom loss on nickel. MBMS experiments showed that ozone was a product of heterogeneous O atom loss on nickel and tile surfaces at low temperatures and that ozone is lost on these materials at elevated temperatures. FI was separately investigated as a method by which excited oxygen molecules may be conveniently detected. Partial O2 dissociation decreases the current produced by FI of the gas.

Nordine, Paul C.↗
NASA NTRS1991

Distances to diffuse interstellar clouds from IRAS measurements and observations of optical absorption lines

Distances to diffuse interstellar clouds were determined from the amount of ultraviolet radiation that penetrates into the cloud and that arises from a nearby B star. The environment around 67 Ophiuchi, 20 Aquilae, kappa Aquilae, and 9 Cephei were studied. The intensities at 60 and 100 micron, as measured by IRAS, were used to derive dust temperatures for the clouds. Enhanced dust temperatures would indicate an influence of the star's radiation field on a cloud. Observation of molecular absorption were compared to the results of simplified chemical models in order to search for enhanced photodissociation that is caused by the star. Enhanced dust temperatures were observed for clouds in the vicinities of 20 Aql, kappa Agl, and 9 Cep. The range of the star's influence was found to be typically 1-5 pc. On the other hand, chemical analyses of the molecular data, which pertain to foreground gas, did not reveal the presence of enhanced dissociative flux from the sample of stars. Thus, upper limits were derived for the distances from the sun to the foreground material.

Federman, S. R.↗
DOE OSTI2024

Resonant Auger decay of dissociating CH 3 I near the I 4d threshold

Resonant Auger processes provide a unique perspective on electronic interactions and excited vibrational and electronic states of molecular ions. Here, new data are presented on the resonant Auger decay of excited CH 3 I in the region just below the I 4d -1 ionization threshold. The resonances include the Rydberg series converging to the five spin–orbit and ligand-field split CH 3 I (I 4d -1 ) thresholds, as well as resonances corresponding to excitation from the I 4d 5/2,3/2 orbitals into the σ* lowest unoccupied molecular orbital. This study focuses on participator decay that populates the lowest lying states of CH 3 I + , in particular, the X̃ 2 E 3/2 and 2 E 1/2 states, and on spectator decay that populates the lowest-lying (CH 3 I 2+ )σ* states of CH 3 I + . The CH 3 I (I 4d -1 )σ* resonances are broad, and dissociation to CH 3 + I competes with the autoionization of the core-excited states. Auger decay as the molecule dissociates produces a photoelectron spectrum with a long progression (up to v 3 + ~ 25) in the C–I stretching mode of the X̃ 2 E 3/2 and 2 E 1/2 states, providing insights into the shape of the dissociative core-excited surface. Further, the observed spectator decay processes indicate that CH 3 I + is formed on the repulsive wall of the lower-lying (CH 3 I 2+ )σ* potentials, and the photon-energy dependence of the processes provides insights into the relative slopes of the (4d -1 )σ* and (CH 3 I 2+ )σ* potential surfaces. Data are also presented for the spectator decay of higher lying CH 3 I (I 4d -1 )nl Rydberg resonances. Photoelectron angular distributions for the resonant Auger processes provide additional information that helps distinguish these processes from the direct ionization signal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Insights into the Reactivity of Brookite TiO 2 Nanorods in Liquid Water from Ab Initio Molecular Dynamics Simulations

Brookite TiO 2 , a rare natural polymorph of TiO 2 , has been reported to be an excellent photocatalyst for the production of hydrogen from water and aqueous alcohol solutions, especially when it is reduced and synthesized in the form of nanorods. Here, we investigate the reactivity of stoichiometric and reduced brookite nanorods in liquid water using ab initio molecular dynamics and hybrid density functional theory calculations. Our simulations show a much higher water dissociation fraction on reduced nanorods than on stoichiometric ones, with an accumulation of the resulting bridging hydroxyls (O br H) and terminal hydroxyls (Ti –OH) on different facets of the nanorod. ObrH groups accumulate preferentially on low-energy (210) facets, where they are stabilized by adjacent reduced Ti (Ti 3+ ) sites, while Ti –OH groups prefer to form at the four-fold coordinated Ti atoms on high-energy (010) facets. This hydroxylation pattern also favors the spatial localization of excited holes on the (010) facets. This coupling between water-induced surface chemistry and charge separation underpins the enhanced photocatalytic activity of brookite nanorods, providing useful information for the design of more efficient TiO2-based nanostructures for solar-driven hydrogen evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Dissociative Ionization of Aromatic and Heterocyclic Molecules

Space radiation poses a major health hazard to humans in space flight. The high-energy charged particles in space radiation ranging from protons to high atomic number, high-energy (HZE) particles, and the secondary species they produce, attack DNA, cells, and tissues. Of the potential hazards, long-term health effects such as carcinogenesis are likely linked to the DNA lesions caused by secondary electrons in the 1 - 30 eV range. Dissociative ionization (DI) is one of the electron collision processes that can damage the DNA, either directly by causing a DNA lesion, or indirectly by producing radicals and cations that attack the DNA. To understand this process, we have developed a theoretical model for DI. Our model makes use of the fact that electron motion is much faster than nuclear motion and assumes DI proceeds through a two-step process. The first step is electron-impact ionization resulting in a particular state of the molecular ion in the geometry of the neutral molecule. In the second step the ion undergoes unimolecular dissociation. Thus the DI cross section sigma(sup DI)(sub a) for channel a is given by sigma(sup DI)(sub a) = sigma(sup I)(sub a) P(sub D) with sigma(sup I)(sub a) the ionization cross section of channel a and P(sub D) the dissociation probability. This model has been applied to study the DI of H2O, NH3, and CH4, with results in good agreement with experiment. The ionization cross section sigma(sup I)(sub a) was calculated using the improved binary encounter-dipole model and the unimolecular dissociation probability P(sub D) obtained by following the minimum energy path determined by the gradients and Hessians of the electronic energy with respect to the nuclear coordinates of the ion. This model is used to study the DI from the low-lying channels of benzene and pyridine to understand the different product formation in aromatic and heterocyclic molecules. DI study of the DNA base thymine is underway. Solvent effects will also be discussed.

Huo, Winifred M.↗
NASA NTRS1993

Determination of spectroscopic properties of atmospheric molecules from high resolution vacuum ultraviolet cross section and wavelength measurements

An account is given of progress during the six-month period 1 Nov. 1992 to 30 Apr. 1993 on work on (1) cross section measurements of the Schumann-Runge continuum; (2) the determination of the predissociation linewidths of the Schumann-Runge bands of O2; (3) the determination of the molecular constants of the ground state of O2; (4) cross section measurements of CO2 in wavelength region 120-170 nm; and (4) determination of dissociation energy of O2. The experimental investigations are effected at high resolution with a 6.65 m scanning spectrometer which is, by virtue of its small instrumental width (FWHM = 0.0013 nm), uniquely suitable for cross section measurements of molecular bands with discrete rotational structure. Below 175 nm and in the region of the S-R continuum, synchrotron radiation is suitable for cross section measurements. All of these spectroscopic measurements are needed for accurate calculations of the production of atomic oxygen and penetration of solar radiation into the Earth's atmosphere.

Parkinson, W. H.↗
DOE OSTI2025

Pd–Methyl Bond Energy─Property Correlations, Noncorrelations, Machine Learning Models, and Application to Polymerization Catalysis

Metal–carbon bonds are a key intermediate in a variety of homogeneous organometallic transformations and often determine the critical thermodynamics and kinetics of catalytic processes. Surprisingly, the influence of different ligands on metal–carbon bond strengths has been largely overlooked. Here, in this study, we evaluated nearly 700 experimental Pd–methyl complexes by calculating their bond dissociation energies using density functional theory (DFT) and compared these bond strengths to several fundamental molecular properties, and this revealed several surprising correlations and noncorrelations. Most surprising was that several fundamental properties, such as the bond length, bond force constant, and bond electron density, have no correlation with bond strength, despite these correlations often holding for main-group compounds. We were indeed able to identify key ligand-dependent chemical features/descriptors that provided a highly accurate machine learning model and provided insight into the general factors that control the Pd–carbon bond strength, such as radical delocalization and nucleophilicity. Insights gained from the Pd–Me bond energy analysis were then applied to CO migratory insertion steps that are part of copolymerization reactions.

binding energy↗
DOE OSTI2023

Dislocation line tension model to improve understanding of the effects of hydrogen on the deformation of structural materials

Decarbonization efforts highlight hydrogen as an attractive alternative to fossil fuels, but its tendency to embrittle structural metals demands careful consideration when designing hydrogen infrastructure. Moreover, the mechanisms by which hydrogen degrades these materials are still being elucidated. The current work develops new computational tools to quantify the different contributions of hydrogen to the energy barrier of cross-slip, a key deformation mechanism. Novel features are implemented to a line tension model, which include the use of non-singular dislocation interactions, character-dependent dislocation energies and simulations of the constriction configurations. A new molecular dynamics technique is developed to calculate the interaction energy between the partials of a dissociated dislocation via fixing the centers of mass of the regions below and above the Shockley partials and performing time-averaged calculations. Hydrogen is found to impact the stacking fault width of dislocations in different ways depending on their characters: it decreases for dislocations with a character θ > 30°, remains unchanged for θ = 30° and increases for θ < 30°. The latter regime is a newly identified mechanism by which hydrogen inhibits cross-slip. Moreover, formation of nano-hydrides is predicted to occur around screw dislocations for high hydrogen concentrations, a phenomenon previously identified only in dislocations with an edge component. If nano-hydrides develop, their influence extending the equilibrium stacking fault width and increasing both the constriction and cross-slip energy barriers dominate over all other hydrogen contributions. The theory and tools developed will pave the way towards a comprehensive understanding of hydrogen-dislocation interactions in structural metals.

08 HYDROGEN↗
NASA NTRS1976

Researches on interactions of satellite-speed helium atoms with aluminum and quartz surfaces

Three major areas were experimentally studied: (1) energy transfer in collisions of satellite-speed (700 m/sec) helium atoms with a cleaned satellite-type aluminum surface was investigated using the molecular-beam technique. Spatial and energy distributions of reflected helium atoms were measured and analyzed, (2) The gross accommodation coefficient for a satellite-speed (7000 m/sec) helium beam entering a 2-inch-diameter aluminum spherical cavity was determined by measuring the exit velocity distribution of the leaving helium atoms using a metastable time-of-flight method. Results indicate that the 7000-m/sec satellite-speed helium atoms entering the cavity gain full accommodation with the room-temperature inner surface of the sphere through a large number of collisions before leaving the spherical cavity; and (3) the feasibility of producing a satellite-speed atomic hydrogen beam by arc-heating, for use in studies of interactions of satellite-surfaces with hydrogen atoms under laboratory conditions, was investigated. It was found that a stable arc-heated molecular hydrogen beam can be obtained using the arc-heater, and that a partially dissociated hydrogen beam can be produced. Photographs of laboratory equipment are shown.

Liu, S. M.↗
NASA NTRS1978

Laser-enhanced dynamics in molecular rate processes

The present discussion deals with some theoretical aspects associated with the description of molecular rate processes in the presence of intense laser radiation, where the radiation actually interacts with the molecular dynamics. Whereas for weak and even moderately intense radiation, the absorption and stimulated emission of photons by a molecular system can be described by perturbative methods, for intense radiation, perturbation theory is usually not adequate. Limiting the analysis to the gas phase, an attempt is made to describe nonperturbative approaches applicable to the description of such processes (in the presence of intense laser radiation) as electronic energy transfer in molecular (in particular atom-atom) collisions; collision-induced ionization and emission; and unimolecular dissociation.

George, T. F.↗
NASA NTRS1992

Cross-linking connectivity in bone collagen fibrils: the COOH-terminal locus of free aldehyde

Quantitative analyses of the chemical state of the 16c residue of the alpha 1 chain of bone collagen were performed on samples from fetal (4-6-month embryo) and mature (2-3 year old) bovine animals. All of this residue could be accounted for in terms of three chemical states, in relative amounts which depended upon the age of the animal. Most of the residue was incorporated into either bifunctional or trifunctional cross-links. Some of it, however, was present as free aldehyde, and the content increased with maturation. This was established by isolating and characterizing the aldehyde-containing peptides generated by tryptic digestion of NaB3H4-reduced mature bone collagen. We have concluded that the connectivity of COOH-terminal cross-linking in bone collagen fibrils changes with maturation in the following way: at first, each 16c residue in each of the two alpha 1 chains of the collagen molecule is incorporated into a sheet-like pattern of intermolecular iminium cross-links, which stabilizes the young, nonmineralized fibril as a whole. In time, some of these labile cross-links maturate into pyridinoline while others dissociate back to their precursor form. The latter is likely due to changes in the molecular packing brought about by the mineralization of the collagen fibrils. The resultant reduction in cross-linking connectivity may provide a mechanism for enhancing certain mechanical characteristics of the skeleton of a mature animal.

NASA Discipline Musculoskeletal↗
DOE OSTI2025

Methanol at Water–TiO 2 Interfaces: Free Energies of Water and Methanol Dissociation

Methanol adsorption on TiO 2 surfaces has long been studied due to its role in enhancing photocatalytic hydrogen evolution, yet how it modulates surface chemistry under aqueous conditions remains little understood. Using molecular dynamics with an ab initio-based deep neural network potential, we find that methanol adsorption induces markedly different effects on the aqueous surfaces of anatase and rutile, the two common phases of TiO 2 . In anatase, methanol adsorption significantly enhances water dissociation, which is otherwise rare at the neat water interface. This enhancement arises from an alternative dissociation pathway mediated by surface-bound methoxyl groups. In contrast, methanol adsorption tends to suppress water dissociation on rutile, replacing it with thermodynamically favored methanol dissociation. Overall, methanol adsorption in an aqueous environment alters not only the availability of key reactive intermediates involved in hydrogen evolution but also the hydrogen source, which turns out to be primarily methanol on rutile, whereas both water and methanol are consumed on anatase. These results provide mechanistic insights into the coupled roles of organic adsorbates and water at photocatalytic interfaces, with implications on how methanol enhances the activity of H 2 evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exploring the Atmospheric Dynamics of the Extreme Ultrahot Jupiter KELT-9b Using TESS Photometry

We carry out a phase-curve analysis of the KELT-9 system using photometric observations from NASA’s Transiting Exoplanet Survey Satellite (TESS). The measured secondary eclipse depth and peak-to-peak atmospheric brightness modulation are 650{sub −15}{sup +14} and 566 ± 16 ppm, respectively. The planet’s brightness variation reaches maximum 31 ± 5 minutes before the midpoint of the secondary eclipse, indicating a 5.°2 ± 0.°9 eastward shift in the dayside hot spot from the substellar point. We also detect stellar pulsations on KELT-9 with a period of 7.58695 ± 0.00091 hr. The dayside emission of KELT-9b in the TESS bandpass is consistent with a blackbody brightness temperature of 4600 ± 100 K. The corresponding nightside brightness temperature is 3040 ± 100 K, comparable to the dayside temperatures of the hottest known exoplanets. In addition, we detect a significant phase-curve signal at the first harmonic of the orbital frequency and a marginal signal at the second harmonic. While the amplitude of the first harmonic component is consistent with the predicted ellipsoidal distortion modulation assuming equilibrium tides, the phase of this photometric variation is shifted relative to the expectation. Placing KELT-9b in the context of other exoplanets with phase-curve observations, we find that the elevated nightside temperature and relatively low day–night temperature contrast agree with the predictions of atmospheric models that include H{sub 2} dissociation and recombination. The nightside temperature of KELT-9b implies an atmospheric composition containing about 50% molecular and 50% atomic hydrogen at 0.1 bar, a nightside emission spectrum that deviates significantly from a blackbody, and a 0.5–2.0 μm transmission spectrum that is featureless at low resolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A High-Fidelity Molecular Model of the Cu(111) Repeating Unit

Dynamic processes at surfaces are central to heterogeneous catalysis, but their atomistic mechanism(s) can prove difficult to elucidate due to variations in material structure and the corresponding impact on reactivity. Moreover, disparities between reaction conditions and those employed for spectroscopic characterization at surfaces can inhibit detailed understanding of catalysis-relevant chemistries. Herein, we substantiate the so-called “cluster-surface” analogy by leveraging a low-valent tricopper architecture ( 1 ) as a model system for small molecule activation at Cu(111). Two reaction classes are explored: the adsorption of carbon monoxide (CO) and the dissociative adsorption of dihydrogen (H 2 ). These processes serve as an ideal testbed to compare the reactivity of a molecular cluster ( 1 ) to that of a heterogeneous surface, as both reactions have empirical data from measurements performed on crystalline Cu(111). Cluster 1 reversibly binds CO. Variable temperature NMR analysis with 13 CO reveals a favorable enthalpy but large negative entropy (−5.1 kcal × mol –1 and −22.9 cal × mol –1 × K –1 , respectively) for CO binding, affording a process that is marginally endergonic at room temperature (ΔG ads (298.15 K) = 1.7 ± 0.5 kcal × mol –1 ). Similarly, analogous to a Cu(111) surface, 1 is shown to oxidatively add (chemisorb) H 2 . Kinetic parameters were determined for this process and the activation enthalpy (8.4 ± 0.5 kcal × mol –1 ) closely mirrors that established for H 2 binding at the Cu(111) facet (6.0 to 12.4 kcal × mol –1 ). Together, these results showcase that a trinuclear cluster can reproduce the small molecule binding and activation energetics of a bulk crystalline surface, setting the stage for studying less-defined surface processes in an atomically precise molecular setting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electron Scattering from 1-Methyl-5-Nitroimidazole: Cross-Sections for Modeling Electron Transport through Potential Radiosensitizers

In this study, we present a complete set of electron scattering cross-sections from 1-Methyl-5-Nitroimidazole (1M5NI) molecules for impact energies ranging from 0.1 to 1000 eV. This information is relevant to evaluate the potential role of 1M5NI as a molecular radiosensitizers. The total electron scattering cross-sections (TCS) that we previously measured with a magnetically confined electron transmission apparatus were considered as the reference values for the present analysis. Elastic scattering cross-sections were calculated by means of two different schemes: The Schwinger multichannel (SMC) method for the lower energies (below 15 eV) and the independent atom model-based screening-corrected additivity rule with interferences (IAM-SCARI) for higher energies (above 15 eV). The latter was also applied to calculate the total ionization cross-sections, which were complemented with experimental values of the induced cationic fragmentation by electron impact. Double differential ionization cross-sections were measured with a reaction microscope multi-particle coincidence spectrometer. Using a momentum imaging spectrometer, direct measurements of the anion fragment yields and kinetic energies by the dissociative electron attachment are also presented. Cross-sections for the other inelastic channels were derived with a self-consistent procedure by sampling their values at a given energy to ensure that the sum of the cross-sections of all the scattering processes available at that energy coincides with the corresponding TCS. This cross-section data set is ready to be used for modelling electron-induced radiation damage at the molecular level to biologically relevant media containing 1M5NI as a potential radiosensitizer. Nonetheless, a proper evaluation of its radiosensitizing effects would require further radiobiological experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Tracing inter-Coulombic decay of molecular dimers

We have conducted an experimental study on the photo double ionization (PDI) of carbon dioxide dimers and oxygen dimers, while focusing on the dissociation dynamics upon single photon absorption. The results in terms of the kinetic energy and angular distributions of the charged particles show unambiguous experimental evidence of intermolecular Coulombic decay (ICD) in carbon dioxide dimers. In the oxygen dimer, the results show that ICD is accompanied by knock-off ionization mechanisms.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1986

Dissociative excitation of the N(+)(5S) state by electron impact on N2 - Excitation function and quenching

Metastable N(+)(5S) ions were produced in the laboratory by dissociative excitation of N2 with energetic electrons. The resulting radiative decay of the N(+)(5S) state was observed with sufficient resolution to completely resolve the doublet from the nearby N2 molecular radiation. The excitation function was measured from threshold to 500 eV. The cross section peaks at a high electron energy and also exhibits a high threshold energy both of which are typical of dissociative excitation-ionization processes. This finding complicates the explanation of electron impact on N2 as the mechanism for the source of the 2145 A 'auroral mystery feature' by further increasing the required peak cross section. It is suggested that the apparent N(+)(5S) quenching in auroras may be an artifact due to the softening of the electron energy spectrum in the auroral E region.

Erdman, P. W.↗