SEARCH · Engineering Papers

Results for “MANIPULATORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1985

The space shuttle orbiter remote manipulator positioning mechanism

The major subassemblies of the Manipulator Positioning Mechanism (MPM) are described and illustrated. The Space Shuttle Orbiter design provides that the MPM may be mounted on either left or right sides of the payload bay, or both sides if two are flown. This MPM is provided for the purpose of securing the remote arm in stowed position during lift-off, boost, and landing. It also provides the deploy, latch and unlatch capabilities of the Remote Manipulator System arm.

Hardee, J. H.↗

NASA NTRS1985

An overview of the space remote manipulator system

An overview of the system requirements and performance of the Shuttle Remote Manipulator System (SRMS) is given. Data on some of the mechanical design considerations that were necessary during the development program are presented. The operational success of both the Orbiter and the SRMS during flights of Space Transportation System-2, -3, and -4 is ample evidence that the SRMS performed as expected and as desired. While some minor improvements were made in the follow-on production systems, one of which was delivered and two of which are currently under construction, the system design did not change significantly. Thus, information given is applicable to all the manipulator systems.

Ussher, T. H.↗

NASA NTRS1986

Operating a Remote Manipulator in Simulated Low Gravity

Efforts to control remote manipulators in simulated microgravity described in report. Experiments conducted to determine effects of weightlessness on performance of operator controlling remote manipulator, or slave arm, by master arm at control station. Report concludes microgravity disturbs neuromotor control of human arm. Also suggests disturbance compensated for by adjustments in controller.

Bejczy, A. K.↗

NASA NTRS1986

Interchangeable Tools for Remote Manipulators

Report presents concepts and specifications for set of interchangeable end-effector tools used on remotely operated manipulator to work on satellites in orbit. Tools make urgent repairs, do routine maintenance, transfer fluids, construct and assemble satellites, and deploy and retract appendages. With modifications, tool concepts and systematic approach to tool design applicable to such terrestrial uses as industrial robots, manually operated tools, and safety equipment. Report discusses concept for tool-storage system that holds tools securely when not used but kept accessible to manipulator.

Cody, J. C.↗

NASA NTRS1985

Parameter identification for a robotic manipulator arm

The development is described of a nonlinear dynamic model for large oscillations of a robotic manipulator arm about a single joint. Optimization routines are formulated and implemented for the identification of electrical and physical parameters from dynamic data taken from an industrial robot arm. Special attention is given to the role of sensitivity in the formulation of robust models of this motion. The importance of actuator effects in the reduction of sensitivity is established and used to develop an electromechanical model of the manipulator system.

Brewer, D. W.↗

NASA NTRS1986

The design, fabrication and delivery of a manipulator foot restraint mockup for space telescope development testing

The Manipulator Foot Restraint (MFR) is a subsystem of the Remote Manipulator System (RMS) which plays a major role in servicing the Hubble Space Telescope (HST) in orbit. Flight drawings were used to construct the MFR to guarantee that the mockup components were functionally equivalent to the flight MFR. Material surface finishes and tolerances that were compatible to the Neutral Buoyance Simulator (NBS) environment were used. Recommendation for improvements are discussed.

Hollingsworth, M. A.↗

NASA NTRS1985

Improving the absolute positioning accuracy of robot manipulators

The absolute positioning accuracy of robot manipulator can be increased substantially by updating the nominal link parameters in the control software. This paper presents a general method to estimate the link parameter errors for any serial link manipulator (i.e., n links, and any combination of revolute and prismatic joints). The parameters are estimated through a linear kinematic model which relates the link bias errors to the end-effector positioning error. Only end-effector measurements are required instead of individual link measurements to implement this method.

Hayati, S.↗

NASA NTRS1987

Linearization of Robot Manipulators

Four nonlinear control schemes equivalent. Report discusses theory of nonlinear feedback control of robot manipulator, emphasis on control schemes making manipulator input and output behave like decoupled linear system. Approach, called "exact external linearization," contributes efforts to control end-effector trajectories, positions, and orientations.

Kreutz, Kenneth↗

NASA NTRS1987

Track and capture of the orbiter with the space station remote manipulator system

Results of the first study using the real-time, man-in-the-loop Systems Engineering Simulator (SES) for track and capture of the Space Shuttle Orbiter with the space station manipulator are presented. The objectives include evaluation of the operational coordination required between the orbiter pilot and the space station manipulator operator, evaluation of the locations and required number of closed-circuit television cameras, and evaluation of the orbiter grapple fixture clearance geometry. The SES is a premium quality real-time facility with full fidelity orbiter and space station crew workstations and cockpits.

Bains, E. M.↗

NASA NTRS1987

An application of the MPP to the interactive manipulation of stereo images of digital terrain models

Massively Parallel Processor algorithms were developed for the interactive manipulation of flat shaded digital terrain models defined over grids. The emphasis is on real time manipulation of stereo images. Standard graphics transformations are applied to a 128 x 128 grid of elevations followed by shading and a perspective projection to produce the right eye image. The surface is then rendered using a simple painter's algorithm for hidden surface removal. The left eye image is produced by rotating the surface 6 degs about the viewer's y axis followed by a perspective projection and rendering of the image as described above. The left and right eye images are then presented on a graphics device using standard stereo technology. Performance evaluations and comparisons are presented.

Pol, Sanjay↗

NASA NTRS1987

Mobile remote manipulator vehicle system

A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

Bush, Harold G.↗

NASA NTRS1987

The design and development of a mobile transporter system for the Space Station Remote Manipulator System

The analyses, selection process, and conceptual design of potential candidate Mobile Transporter (MT) systems to move the Space Station Remote Manipulator System (SSRMS) about the exposed faces of the Space Station truss structure are described. The actual requirements for a manipulator system on the space station are discussed, including potential tasks to be performed. The SSRMS operating environment and control methods are analyzed with potential design solutions highlighted. Three general categories of transporter systems are identified and analyzed. Several design solution have emerged that will satisfy these requirements. Their relative merits are discussed, and unique variations in each system are rated for functionality.

Carroll, Thomas W.↗

NASA NTRS1985

Remotely manipulated and autonomous robotic welding fabrication in space

The results of a NASA sponsored study, performed in order to establish the feasibility of remotely manipulated or unmanned welding fabrication systems for space construction, are presented. Possible space welding fabrication tasks and operational modes are classified and the capabilities and limitations of human operators and machines are outlined. Human performance in remote welding tasks was experimentally tested under the sensing and actuation constraints imposed by remote manipulation in outer space environments. Proposals for the development of space welding technology are made and necessary future R&D efforts are identified. The development of improved visual sensing strategies and computer encoding of the human welding engineering expertise are identified as essential, both for human operator assistance and for autonomous operation in all phases of welding fabrication. Novel uses of machine vision for the determination of the weld joint and bead geometry are proposed, and a prototype of a rule-based expert system is described for the interpretation of the visually detected weld features and defects.

Agapakis, J. E.↗

NASA NTRS1986

On the symbolic manipulation and code generation for elasto-plastic material matrices

A computerized procedure for symbolic manipulations and FORTRAN code generation of elastoplastic material matrix for finite element applications is presented. Special emphasis is placed on expression simplifications during intermediate derivations, optimal code generation, and interface with the main program. A systematic procedure is outlined to avoid redundant algebraic manipulations. Symbolic expressions of the derived material stiffness matrix are automatically converted to RATFOR code which is then translated into FORTRAN statements through a preprocessor. To minimize the interface problem with the main program, a template file is prepared so that the translated FORTRAN statements can be merged into the file to form a subroutine (or a submodule). Three constitutive models; namely, von Mises plasticity, the Drucker-Prager model, and a concrete plasticity model, are used as illustrative examples.

Chang, T. Y.↗

NASA NTRS1987

Direct adaptive control of manipulators in Cartesian space

A new adaptive-control scheme for direct control of manipulator end effector to achieve trajectory tracking in Cartesian space is developed in this article. The control structure is obtained from linear multivariable theory and is composed of simple feedforward and feedback controllers and an auxiliary input. The direct adaptation laws are derived from model reference adaptive control theory and are not based on parameter estimation of the robot model. The utilization of adaptive feedforward control and the inclusion of auxiliary input are novel features of the present scheme and result in improved dynamic performance over existing adaptive control schemes. The adaptive controller does not require the complex mathematical model of the robot dynamics or any knowledge of the robot parameters or the payload, and is computationally fast for on-line implementation with high sampling rates. The control scheme is applied to a two-link manipulator for illustration.

Seraji, H.↗

NASA NTRS1986

Linear multivariable control of robot manipulators

The paper presents a simple scheme for the linear multivariable control of multi-link robot manipulators. The control scheme consists of multivariable feedforward and feedback controllers. The feedforward controller is the minimal inverse of the linearized model of robot dynamics and contains only proportional-double-derivative terms. This controller ensures that the manipulator joint angles track any reference trajectories. The feedback controller is of proportional-derivative type and achieves stability and pole placement. This controller reduces any initial tracking error to zero as desired. The two controllers are independent of each other and are designed separately based on the linearized robot model and then integrated in an overall control scheme.

Seraji, H.↗

NASA NTRS1987

An approach to multivariable control of manipulators

The paper presents simple schemes for multivariable control of multiple-joint robot manipulators in joint and Cartesian coordinates. The joint control scheme consists of two independent multivariable feedforward and feedback controllers. The feedforward controller is the minimal inverse of the linearized model of robot dynamics and contains only proportional-double-derivative (PD2) terms - implying feedforward from the desired position, velocity and acceleration. This controller ensures that the manipulator joint angles track any reference trajectories. The feedback controller is of proportional-integral-derivative (PID) type and is designed to achieve pole placement. This controller reduces any initial tracking error to zero as desired and also ensures that robust steady-state tracking of step-plus-exponential trajectories is achieved by the joint angles. Simple and explicit expressions of computation of the feedforward and feedback gains are obtained based on the linearized model of robot dynamics. This leads to computationally efficient schemes for either on-line gain computation or off-line gain scheduling to account for variations in the linearized robot model due to changes in the operating point. The joint control scheme is extended to direct control of the end-effector motion in Cartesian space. Simulation results are given for illustration.

Seraji, H.↗

NASA NTRS1987

Design of force/position controllers for manipulators

The paper presents simple methods for the design of adaptive force and position controllers for robot manipulators within the hybrid control architecture. The force controller is composed of an adaptive PID feedback controller, an auxiliary signal and a force feedforward term, and achieves tracking of desired force setpoints in the constraint directions. The position controller consists of adaptive feedback and feedforward controllers and an auxiliary signal; and accomplishes tracking of desired position trajectories in the free directions. The controllers are capable of compensating for dynamic cross-couplings that exist between the position and force control loops in the hybrid control architecture. The adaptive controllers do not require knowledge of the complex dynamic model or parameter values of the manipulator or the environment. The proposed control schemes are computationally fast and suitable for implementation in on-line control with high sampling rates.

Seraji, H.↗