Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Nanotwin formation in Ni-Mo-W alloys deposited by dc magnetron sputtering

Nanotwinned metals and alloys have an attractive suite of properties, but the formation of the underlying nanostructure is generally dependent on the alloy chemistry and processing conditions. This study was undertaken to investigate the effect of deposition rate on nanotwin formation in sputter deposited Ni 84 Mo 11 W 5 that possess ultrahigh strength and stability. Specifically, deposition rates of 0.5-2.3 nm/s were examined and the grain size, texture, twin spacing and hardness were characterized. Minimal variations in the underlying nanostructure and attendant hardness were observed, elucidating a wide processing window and the importance of chemistry on the formation of nanotwins in this alloy.

36 MATERIALS SCIENCE↗

Micro-Scratch Study of a Magnetron-Sputtered Zr-Based Metallic-Glass Film

Using the micro-scratch technique, the tribological behavior of ZrCuAlNi metallic-glass coatings on 316L stainless steel was studied. With the application of ramping normal loads, the critical normal loads of about 110 mN were determined, at which the coefficient of friction increased sharply and the indenter penetration depth exceeded the film thickness. No clear evidence of coating debonding has been found, which, together with the observation of multiple shear bands, indicates good adhesion and ductility of the metallic-glass coating. When subjected to constant normal loads, the coefficient of friction increased rapidly once the critical normal load was passed. The scratch results and the scanning-electron microscopy observations indicated good adhesion between the coating and the substrate, which may be due to the good interfacial bonding and low coating residual stress.

36 MATERIALS SCIENCE↗

Effect of SrO Doping on LaGaO 3 Synthesis via Magnetron Sputtering

The high temperature growth behavior of epitaxial LaGaO 3 thin films with and without SrO is determined with real-time X-ray scattering. In this study, we find SrO alters the thin film growth mode of LaGaO 3 , both when predeposited on a surface as well as when SrO and LaGaO 3 are codeposited. We also find that depositing a small amount of SrO on a LaGaO 3 surface induces significant structural rearrangement in the film. We describe mechanisms under which these transformations can occur. In conclusion, the strong effect of SrO on the microstructure of La 1–x Sr x GaO 3 likely has wider implications for other ionically conducting oxide materials.

36 MATERIALS SCIENCE↗

Photoluminescence and positron annihilation spectroscopy investigation of (Ge, Er) codoped Si oxides deposited by magnetron sputtering

We have investigated the nature of violet-blue emission from (Ge, Er) codoped Si oxides (Ge+Er+SiO{sub 2}) using photoluminescence (PL) and positron annihilation spectroscopy (PAS) measurements. The PL spectra and PAS analysis for a control Ge-doped SiO{sub 2} (Ge+SiO{sub 2}) indicate that Ge-associated neutral oxygen vacancies (Ge-NOV) are likely responsible for the major emission in the violet-blue band. For Ge+Er+SiO{sub 2}, both Ge-NOV and GeO color centers are believed to be responsible for the emission band. The addition of Er has a significant influence on the emission, which is discussed in terms of Er-concentration-related structural change in the Ge+Er+SiO{sub 2}.

36 MATERIALS SCIENCE↗

The influence of substrate temperature and Al mobility on the microstructural evolution of magnetron sputtered ternary Ti-Al-N thin films

Ternary Ti-Al-N films were deposited onto Al{sub 2}O{sub 3} (0001) substrates by reactive cosputtering from elemental Ti and Al targets and analyzed by in situ and ex situ x-ray scattering, Rutherford backscattering spectroscopy, transmission electron microscopy, and x-ray photoemission spectroscopy. The deposition parameters were set to values that yield Ti:Al:N ratios of 2:1:1 and 4:1:3 at room temperature. 2TiAlN depositions at 675 deg. C result in epitaxial Ti{sub 2}AlN growth with basal planes parallel to the substrate surface. Nominal 4TiAl3N depositions at 675 deg. C and above, however, yield domain growth of TiN and Ti{sub 2}AlN due to Al loss to the vacuum. Depositions at a lower temperature of 600 deg. C yield films with correct 4:1:3 stoichiometry, but Ti{sub 4}AlN{sub 3} formation is prevented, supposedly by insufficient adatom mobility. Instead, an incoherent Ti{sub n+1}AlN{sub n} structure with random twinned stacking sequences n is obtained that exhibits both basal plane orientations parallel and nearly perpendicular to the substrate interface. X-ray photoemission spectroscopy shows that in contrast to stoichiometric nitrides the Al is metallically bonded and hence acts as twinning plane within the Ti{sub n+1}AlN{sub n} stackings. Domains with perpendicular basal plane orientation overgrow those with parallel orientation in a competitive growth mode. The resulting morphology is a combination of smooth-surface parallel-basal-plane-oriented domains interrupted by repeated facetted hillocklike features with perpendicular basal plane orientation.

36 MATERIALS SCIENCE↗

Size controlled synthesis of Ge nanocrystals in SiO{sub 2} at temperatures below 400 deg. C using magnetron sputtering

A simple and silicon process-compatible technique is reported for the synthesis of Ge nanocrystals (Ge-ncs) at low temperatures below 400 deg. C, which is much lower than the typical growth temperatures. The Ge-ncs were found to form only within a temperature window between 350 and 420 deg. C. The underlying mechanism has been explained by a competitive process between Volmer-Weber growth and oxidation reaction. We further implemented this technique in the fabrication of multilayered Ge-ncs which exhibited controllable crystallite size with high crystallization quality. The low temperature technique developed in this work would allow production of Ge-ncs and relative devices on low cost substrates, such as glass.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The dislocation density and twin-boundary frequency determined by X-ray peak profile analysis in cold rolled magnetron-sputter deposited nanotwinned copper

The dislocation density and the average twin boundary frequency is determined quantitatively in as-deposited and cold-rolled nanotwinned Cu thin films by high-resolution X-ray line profile analysis. After cold-rolling the dislocation density increases considerably, whereas the twin boundary frequency decreases only slightly. The physical parameters of the substructure provided by the quantitative X-ray analysis are in agreement with earlier transmission electron microscopy observations. The flow stress of the as-deposited and the cold-rolled films is directly correlated with the average thickness of twin lamellae and the dislocation density by taking into account the Hall-Petch and Taylor type strengthening mechanisms.

36 MATERIALS SCIENCE↗