Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Magnetically self-assembled SrFe12O19/Fe-Co core/shell particles

Epitaxial growth to synthesize core/shell-structured materials is limited because large lattice mismatches are common between materials. Magnetically hard/soft, core/shell-structured materials can be potentially used for rare-earth free permanent magnets, but their synthesis presents a challenge. We report a wet chemistry method to synthesize core/shell structured particles consisting of a magnetically hard SrFe12O19 core and a soft Fe-Co shell, with a lattice mismatch of similar to 100%, which cannot be achieved by conventional epitaxial growth or other alternative methods. When decreasing the size of the magnetically soft Fe-Co nanoclusters to below 5 nm, we show that they can be magnetically attracted by the hard SrFe12O19 to form core/shell structured particles. An AC demagnetization experiment demonstrates the formation mechanism of the core/shell particles, and their magnetic hysteresis loop shows potential for use as rare-earth free permanent magnets. Published by Elsevier B.V.

Xu, X↗

Transverse barrier formation by electrical triggering of a metal-to-insulator transition

Application of an electric stimulus to a material with a metal-insulator transition can trigger a large resistance change. Resistive switching from an insulating into a metallic phase, which typically occurs by the formation of a conducting filament parallel to the current flow, is a highly active research topic. Using the magneto-optical Kerr imaging, we found that the opposite type of resistive switching, from a metal into an insulator, occurs in a reciprocal characteristic spatial pattern: the formation of an insulating barrier perpendicular to the driving current. This barrier formation leads to an unusual N-type negative differential resistance in the current-voltage characteristics. We further demonstrate that electrically inducing a transverse barrier enables a unique approach to voltage-controlled magnetism. By triggering the metal-to-insulator resistive switching in a magnetic material, local on/off control of ferromagnetism is achieved using a global voltage bias applied to the whole device.

36 MATERIALS SCIENCE↗

Nanocomposite Magnetic Technology for High Frequency MW Scale Power Conversion

The purpose of this project was to demonstrate the use of advanced magnetic materials in a medium voltage DC-DC converter for photovoltaic applications. The lead, alloy development team met project development milestones targeting a low loss material (<20 W/kg at 10kHzT), alloy resistivity (>150μΩcm amorphous phase resistivity), evaluation of the operational lifetime of the material (continuous operation above 155C), and the performance metric (power ratio >100) for a new class of Co-rich alloys with tunable permeability. Material manufacturability was demonstrated in continuously casting over 5 kg batches of 1’’ width, 18μm thickness (less than 80-120% deviation), amorphous ribbon, and processing including field and strain annealing as well as rolling both Fe and Co based alloys to less the 15μm was achieved. Parallel technology to markets efforts found that while a more compact and more efficient converter, which reduces the balance of plant cost, would enjoy a $0.10/W premium over current technology. Due to uncertainty in future energy policy and barriers to market entry the technology to market analyses recommended partnering with an existing manufacturer. The industrial and transportation electric motor market was also identified as one standing to benefit from this material technology and key personnel within this market were identified. With the assistance of Dynapower the converter prototype was tested to 300 VDC (18 kVA) before the resonant capacitors failed. The prototype incorporated several subsystems including the passive and active components at the engineering scale and exposed at least one weak point in the prototype. Independent testing on the core materials predicts that the core would have met the operating specifications, but this component was not tested at nominal power. Based on this prediction and the demonstrated construction of the prototype core, we recommend that the core material is designated TRL 5. The CMU team is currently working with Eaton to identify opportunities further test cores in inductive components.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Thermoelectricity in transition metal compounds: The role of spin disorder

Here, at room temperature and above, most magnetic materials adopt a spin-disordered (paramagnetic) state whose electronic properties can differ significantly from their low-temperature, spin-ordered counterparts. Yet computational searches for new functional materials usually assume some type of magnetic order. In the present work, we demonstrate a methodology to incorporate spin disorder in computational searches and predict the electronic properties of the paramagnetic phase. We implement this method in a high-throughput framework to assess the potential for thermoelectric performance of 1350 transition-metal sulfides and find that all magnetic systems we identify as promising in the spin-ordered ground state cease to be promising in the paramagnetic phase due to disorder-induced deterioration of the charge carrier transport properties. We also identify promising non-magnetic candidates that do not suffer from these spin disorder effects. In addition to identifying promising materials, our results offer insights into the apparent scarcity of magnetic systems among known thermoelectrics and highlight the importance of including spin disorder in computational searches.

36 MATERIALS SCIENCE↗

Probing short-range magnetic order in a geometrically frustrated magnet by means of the spin Seebeck effect

The spin Seebeck effect (SSE) is a phenomenon where a spin current is generated from thermal excitations in magnetic materials. It is believed that magnetic long-range order (LRO) is not required for SSE, while short-ranged order (SRO) plays an important role. However, a definitive experimental demonstration of the connection between the SSE and SRO has been missing. Here, we show that the SSE is able to probe a specific SRO in a model geometrically frustrated magnet Gd 3 Ga 5 O 12 (GGG). A field-induced SRO in GGG is detected by the SSE in the temperature range 2-5 K. The origin of the SRO is verified by comparing the SSE data directly to existing neutron scattering measurements at much lower temperatures (T < 0.9 K), where field-induced LRO exists. Our theoretical calculations of the magnetic structure further confirm the anisotropic field dependence of the SRO in GGG. Furthermore, these findings establish that the SSE can serve as an effective probe of SRO in geometrically frustrated magnets.

36 MATERIALS SCIENCE↗

Summary of Industry-Academia Collaboration Projects on Cluster Ion Beam Process Technology

Processes employing clusters of ions comprised of a few hundred to many thousand atoms are now being developed into a new field of ion beam technology. Cluster-surface collisions produce important non-linear effects which are being applied to shallow junction formation, to etching and smoothing of semiconductors, metals, and dielectrics, to assisted formation of thin films with nano-scale accuracy, and to other surface modification applications. In 2000, a four year R and D project for development of industrial technology began in Japan under funding from the New Energy and Industrial Technology Development Organization (NEDO). Subjects of the projects are in areas of equipment development, semiconductor surface processing, high accuracy surface processing and high-quality film formation. In 2002, another major cluster ion beam project which emphasized nano-technology applications has started under a contract from the Ministry of Economy and Technology for Industry (METI). This METI project involved development related to size-selected cluster ion beam equipment and processes, and development of GCIB processes for very high rate etching and for zero damage etching of magnetic materials and compound semiconductor materials. This paper describes summery of the results.

36 MATERIALS SCIENCE↗

Effect of Surface Oxidation and Crystal Thickness on the Magnetic Properties and Magnetic Domain Structures of Cr 2 Ge 2 Te 6

van der Waals (vdW) magnetic materials, such as Cr 2 Ge 2 Te 6 (CGT), show promise for memory and logic applications. This is due to their broadly tunable magnetic properties and the presence of topological magnetic features such as skyrmionic bubbles. A systematic study of thickness and oxidation effects on magnetic domain structures is important for designing devices and vdW heterostructures for practical applications. Here, we investigate thickness effects on magnetic properties, magnetic domains, and bubbles in oxidation-controlled CGT crystals. We find that CGT exposed to ambient conditions for 5 days forms an oxide layer approximately 5 nm thick. This oxidation leads to a significant increase in the oxidation state of the Cr ions, indicating a change in local magnetic properties. This is supported by real-space magnetic texture imaging through Lorentz transmission electron microscopy. By comparing the thickness-dependent saturation field of oxidized and pristine crystals, we find that oxidation leads to a nonmagnetic surface layer that is thicker than the oxide layer alone. We also find that the stripe domain width and skyrmionic bubble size are strongly affected by the crystal thickness in pristine crystals. Finally, these findings underscore the impact of thickness and surface oxidation on the properties of CGT, such as saturation field and domain/skyrmionic bubble size, and suggest a pathway for manipulating magnetic properties through a controlled oxidation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

System Cost Analysis for an Interior Permanent Magnet Motor

The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

33 ADVANCED PROPULSION SYSTEMS↗

Machine learning assisted search for Fe–Co–C ternary compounds with high magnetic anisotropy

We employ a machine learning (ML)-guided framework to explore rare earth free magnetic materials, specifically focusing on Fe–Co–C ternary compounds for potential use in permanent magnets. Utilizing a specifically trained crystal graph convolutional neural network model, we efficiently screen a vast space of nearly a million substitutional structures to select 620 promising structures for further investigation by first-principles calculation. We predict five low-energy metastable Fe–Co–C compounds with formation energy less than 150 meV/atom above the convex hull. These compounds exhibit high magnetization (Js > 1.0 T) and significant magnetic anisotropy (K1 > 1.0 MJ/m3), making them promising candidates for permanent magnet applications. The phonon calculations indicate these compounds are dynamically stable. Our ML-guided framework demonstrates the utility of rapidly identifying novel materials with tailored magnetic properties.

36 MATERIALS SCIENCE↗

Characterizations of maghemite thin films prepared by a sol-gel method

Iron is one of the abundant elements of Mother Nature and its compound, iron oxide is an interesting material to study since its discovery in the form of magnetite. It can exist in many phases such as hematite and maghemite, this unique nature has put it as a potential candidate in various applications. The aim of this work is to study the influence of different precursor concentrations on the microstructural and magnetic properties of iron oxide thin film. All samples were prepared via the sol-gel method followed by a spin coating technique on quartz substrates. Iron oxide films were confirmed as maghemite phase from X-ray diffraction patterns. The film morphology was examined by a field emission scanning electron microscope and it showed non-systematic value of average grain size and film thickness throughout the study. Hysteresis loop further confirmed that maghemite is a magnetic material when it was characterized by a vibrating sample magnetometer. The coercivity did not show any correlation with molarity. Nevertheless, it increased as the precursor concentration of the film increased due to the domain behaviour. In conclusion, maghemite thin films were successfully synthesized by the sol-gel method with different precursor concentrations in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fractional electrical dimensionality in the spin solid phase of artificial honeycomb lattice

Two-dimensional artificial magnetic honeycomb lattices are at the forefront of research on unconventional magnetic materials. Among the many emergent magnetic phases that are predicted to arise as a function of temperature, the low temperature spin solid phase with zero magnetization and entropy is of special importance. Here, we report an interesting perspective to the consequence of spin solid order in an artificial honeycomb lattice of ultra-small connected elements using electrical dimensionality analysis. At low temperature, T ≤ 30 K, the system exhibits a very strong insulating characteristic. The electrical dimensionality analysis of the experimental data reveals a fractional dimensionality of d = 0.6(0.04) in the spin solid phase of honeycomb lattice at low temperature. The much smaller electrical dimension in the spin solid phase, perhaps, underscores the strong insulating behavior in this system. Furthermore, the fractional dimensionality in an otherwise two-dimensional system suggests a non-surface-like electrical transport at low temperature in an artificial honeycomb lattice.

36 MATERIALS SCIENCE↗

Patterns of Retropharyngeal Node Metastasis in Nasopharyngeal Carcinoma

Purpose: To explore the pattern of metastasis to retropharyngeal lymph nodes (RLN) and its relationship with tumor range in nasopharyngeal carcinoma (NPC) patients by using magnetic resonance imaging. Methods and Materials: Magnetic resonance images of 618 NPC patients were reviewed. Nodes were classified as metastatic on the basis of size criteria, the presence of nodal necrosis, and extracapsular spread. Results: A total of 597 involved RLN were detected in 392 patients (63.4%). The sites of RLN metastasis included occipital bone, 37 (6.2%); first cervical vertebra (C1), 453 (75.9%); second cervical vertebra (C2), 104 (17.4%); and third cervical vertebra (C3), 3 (0.5%). The incidence of RLN involvement was less than that of Level IIb node involvement (72.2% vs. 86.5%) in 543 patients with lymphadenopathy. The incidence of RLN metastasis was significantly higher in cases of parapharyngeal space invasion or involvement of Level II, Level III, Level IV, and/or Level V nodes and significantly lower in N0 and Stage I disease. Conversely, the incidence of RLN metastasis did not differ significantly among T1, 2, 3, and 4 disease or among Stage II, III, and IV disease. Conclusions: Level IIb nodes, rather than RLN, seem to be the first-echelon nodes in NPC. The incidence of RLN metastasis decreases steadily from level C1 to level C3. Retropharyngeal lymph node metastasis correlates well with involvement of the parapharyngeal space and metastases to Level II, III, IV, and/or V nodes but not with T stage.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Interplay between defect transport and cation spin frustration in corundum-structured oxides

Despite the fundamental importance of mass transport, there is still a lack of knowledge regarding the mechanisms in many materials. In particular, how the magnetic spin structure interacts with migrating defects is unclear. In this work, using density functional theory to examine cation interstitial transport in antiferromagnetic corundum-structured oxides, we reveal an interplay between the migration of the interstitial and the magnetic structure of the oxide. The magnetic spin configuration impacts the migration energy of the migrating defect but, critically, the defect modifies the spin configuration. Thus, the two aspects change in concert to modify one another. This has profound implications for mass transport in magnetic materials.

36 MATERIALS SCIENCE↗

ERL with non-scaling fixed field alternating gradient lattice for eRHIC

The proposed eRHIC electron-hadron collider uses a "non-scaling FFAG" (NS-FFAG) lattice to recirculate 16 turns of different energy through just two beam lines located in the RHIC tunnel. This paper presents lattices for these two FFAGs that are optimized for low magnet field and to minimize total synchrotron radiation across the energy range. The higher number of recirculations in the FFAG allows a shorter linac (1.322GeV) to be used, drastically reducing cost, while still achieving a 21.2 GeV maximum energy to collide with one of the existing RHIC hadron rings at up to 250GeV. eRHIC uses many cost-saving measures in addition to the FFAG: the linac operates in energy recovery mode, so the beams also decelerate via the same FFAG loops and energy is recovered from the interacted beam. All magnets will be constructed from NdFeB permanent magnet material, meaning chillers and large magnet power supplies are not needed. This paper also describes a small prototype ERL-FFAG accelerator that will test all of these technologies in combination to reduce technical risk for eRHIC.

43 PARTICLE ACCELERATORS↗

Microscopic and magnetic properties of template assisted electrodeposited iron nanowires

Nanowires of magnetic materials such as Iron, nickel, cobalt, and alloys of them are one of the most widely investigated structures because of their possible applications in high density magnetic recording media, sensor elements, and building blocks in biological transport systems. In this work, Iron nanowires have been prepared by electrodeposition technique using Anodized Aluminium Oxide (AAO) templates. The electrolyte used consisted of FeSO{sub 4.}6H{sub 2}O buffered with H{sub 3}BO{sub 3} and acidized by dilute H{sub 2}SO{sub 4}. FESEM analysis shows that the asdeposited nanowires are parallel to one another and have high aspect ratio with a reasonably high pore-filing factor. To fabricate the working electrode, a thin film of copper (∼ 220 nm thick) was coated on back side of AAO template by e-beam evaporation system to create electrical contact with the external circuit. The TEM results show that electrodeposited nanowires have diameter around 100 nm and are polycrystalline in structure. Magnetic properties show the existence of anisotropy for in and out of plane configuration. These nanowires have potential applications in magnetic data storage, catalysis and magnetic sensor applications.

36 MATERIALS SCIENCE↗

Low-temperature MnBi alloys: Electronic and magnetic properties, constitution, morphology and fabrication (Review article)

The article reviews the rich phenomena of physical properties of MnBi. The diverse phenomena include strong spin-orbit interaction, anomalous temperature dependence of the coercivity and the magneto-crystalline anisotropy field, unique magneto-optical properties. Issues addressed include the nature of the electronic ground states of MnBi, the electronic and magnetic structures, Fermi surface, magneto-crystalline anisotropy, x-ray magnetic dichroism. The discussion includes key experiments, such as optical and magneto-optical spectroscopic measurements, de Haas-van Alphen (dHvA) measurements, x-ray photoemission and x-ray absorption spectroscopy measurements as well as x-ray magnetic circular dichroism. The effect of the spin-orbit (SO) interaction and Coulomb repulsion U were found to be crucial for the Fermi surface, cyclotron masses, magneto-optical properties, and x-ray magnetic circular dichroism. The microscopic origin of unique magneto-crystalline anisotropy and giant Kerr effect in MnBi is analyzed in detail. The huge Kerr effect in MnBi is caused by the combination of a sizable magnetic moment on manganese, the large spin-orbit coupling of bismuth, and a strong hybridization between the manganese 3d and the bismuth 6p states. The magneto-optically active states are mainly the 6p states of Bi. We show that the observed temperature dependence of the magneto-crystalline anisotropy can be explained taking into account the spin-orbit interaction together with strong Coulomb electron-electron interaction. The SO coupling of Bi is equally responsible for the large magneto-crystalline anisotropy energy as is the exchange splitting of Mn. The fabrication, morphology, and constitution of low-temperature MnBi alloys in bulk, thin films, and nanoparticles are discussed. The nanocomposite permanent magnetic materials based on MnBi, (Co, Fe) and Nd 2 Fe 14 B are also discussed.

36 MATERIALS SCIENCE↗

Ultrafast THz emission spectroscopy of spin currents in the metamagnet FeRh

Heterostructures of ferromagnetic (FM) and noble metal (NM) thin films have recently attracted considerable interest as viable platforms for the ultrafast generation, control, and transduction of light-induced spin currents. In such systems, an ultrafast laser can generate a transient spin current in the FM layer, which is then converted to a charge current at the FM/NM interface due to strong spin–orbit coupling in the NM layer. Whether such conversion can happen in a single material and how the resulting spin current can be quantified are open questions under active study. Here, we report ultrafast THz emission from spin–charge conversion in a bare FeRh thin film without any NM layer. Our results highlight that the magnetic material by itself can enable spin–charge conversion in the same order as that in a FM/NM heterostructure. We further propose a simple model to estimate the light-induced spin current in FeRh across its metamagnetic phase transition temperature. Our findings have implications for the study of the ultrafast dynamics of magnetic order in quantum materials using THz emission spectroscopy.

36 MATERIALS SCIENCE↗

1D Magnetic MX 3 Single-Chains (M = Cr, V and X = Cl, Br, I)

Magnetic materials in reduced dimensions are not only excellent platforms for fundamental studies of magnetism, but they play crucial roles in technological advances. The discovery of intrinsic magnetism in monolayer 2D van der Waals systems has sparked enormous interest, but the single-chain limit of 1D magnetic van der Waals materials has been largely unexplored. This paper reports on a family of 1D magnetic van der Waals materials with composition MX 3 (M = Cr, V, and X = Cl, Br, I), prepared in fully-isolated fashion within the protective cores of carbon nanotubes. Atomic-resolution scanning transmission electron microscopy identifies unique structures that differ from the well-known 2D honeycomb lattice MX 3 structure. Density functional theory calculations reveal charge-driven reversible magnetic phase transitions.

1D materials↗