Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Locating Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

SU-F-T-457: A Filmless Method for Measurement of Couch Translation Per Gantry Rotation and Couch Speed for Tomotherapy Using ArcCheck

Purpose: To develop a filmless methodology based on an ArcCheck for QA measurement of the couch translation per gantry rotation and couch speed of a Tomotherapy unit. Methods: Two test plans recommended by TG148 were chosen for this study. A helical plan with 1 cm field size opened the leaves for 180 degrees at the 2nd, 7th and 12th of total 13 rotations and was used to verify if the couch travelled the expected distance per gantry rotation. The other test plan was a static plan with the gantry at 0°, 1cm field width and constant couch movement speed of 0.5mm/s. It was used for couch speed measurement. The ArcCheck was isocentrically set up and recorded movie files which took a snapshot exposure every 50ms. Due to the spiral pattern of diodes distribution, when one of the diodes of the ArcCheck located at the beam center, the dose profile as measured by the row of diodes which surrounded the center diode should have a symmetrical pattern. We divided the profile into left half A and right half B. Then a shape parameter was defined as S=Σ|(A−B)|/Σ(A+B). By searching the local minimum of S parameter, the beam center at different time could be located. The machine trajectory log data were also collected and analyzed for comparison. Results: The mean value of measured couch translation and couch speed by ArcCheck had less than 0.05% deviation from the planned values. For couch speed measurement, our result showed a mean value of 0.5002 with an uncertainty ±0.0031, which agreed very well with both the plan setting of 0.5 mm/s and the machine log data of 0.5005 mm/s. Conclusion: Couch translation measured using ArcCheck is accurate and comparable to the film-based measurement. This filmless method also provides a convenient and independent way for measuring couch speed.

61 RADIATION PROTECTION AND DOSIMETRY↗

Validations of Satellite Ozone Profiles in Austral Spring Using Ozonesonde Measurements in the Jang Bogo Station, Antarctica

Using ozonesonde measurements from 2015 to 2018 at the Jang Bogo station located in the southeastern Antarctic region, we evaluate ozone profiles retrieved from the three satellite measurements that are widely used: Ozone Monitoring Instrument (OMI), Microwave Limb Sounder (MLS), and Ozone Mapping Profiler Suite (OMPS) data. For the fair validation, ozonesonde profiles are smoothed using the weighting function of each satellite retrieval algorithm (i.e., convolution process). Compared with limb-viewing MLS and OMPS ozone profiles, the OMI ozone profiles are relatively less qualified: coarser vertical resolution and larger inter-annual variation. Nevertheless, our validation reveals that the quality of all three satellite ozone profiles looks comparable; In general, difference from ozonesonde profile is ∼1 ppm absolutely, and −20 to 30% relatively at maximum. This quantitative range well corresponds to previous work, meaning that our new validation confirms the reliability of satellite ozone profiles in the southeastern Antarctic region where the measurement data for the validation were not enough. Another interesting feature is the role of a priori ozone profile; Nadir-viewing OMI satellite can have qualified ozone profiles by a proper assumption of a priori ozone profile. Since the performance of limb-viewing ozone profiles is better, however, the careful usage of nadir-viewing ozone profile is still required. We think that the simultaneous usage of multiple satellite ozone profiles can contribute to better understanding of Antarctic ozone characteristics.

Antarctica↗

The landscape of regulatory element evolution in a C4 perennial grass

Gene regulatory evolution is a well-known source of phenotypic diversity and adaptive evolution. Although cis-regulatory elements (CREs) play a vital role in gene expression evolution, the molecular evolution of CREs remains mostly unknown due to the difficulty in identifying and characterizing these functional elements. Comparative genomic analyses of noncoding DNA can be leveraged to identify conserved noncoding sequences (CNS), many of which may harbor functional CREs conserved by purifying selection. However, purely computational inference of CREs from putative CNS can be erroneous due to the complex genomic architecture in plants. One promising experimental approach to identify CREs is by profiling accessible chromatin regions (ACRs) that are often associated with the location of CREs. In this study, we use comparative genomics along with the profiling of ACRs to study the molecular evolution of putative functional noncoding regulatory regions in Panicoid grasses. We identified sets of CNS that varied in relationship to the degree of evolutionary divergence among the studied taxa, including identifying core-Panicoid-CNS. We augmented this analysis by profiling ACRs in Panicum hallii ecotypes using ATAC-seq. ACRs had low SNP density at the summit, harbored a high frequency of core-Panicoid-CNS, and were enriched with expression QTL. These data help to annotate the P. hallii genome for putative functional elements and suggest that a large proportion of these ACRs are evolving under purifying selection. Turnover in CNS and ACR between ecotypes of P. hallii identifies a small set of putatively divergent CREs that may underlie differences in gene regulation between genotypes from inland and coastal habitats. In summary, we profiled ACRs in Panicoid grasses and integrated this data with our putative CNS prediction framework, which provides unique insight into patterns of polymorphism and divergence in CREs in C4 perennial grasses.

59 BASIC BIOLOGICAL SCIENCES↗

Capabilities and limitations of existing MST radars: Colorado wind profilers

The Wave Propagation Laboratory is developing a ground-based remote sensing system called PROFILER to measure troposphere parameters currently measured in operational meteorology by radiosondes. The prototype PROFILER uses two radars for wind sounding: a 6-m radar located at Platteville, Colorado, and a 33-cm radar located at Denver's Stapleton International Airport. In addition, a network of three 6-m wind-profiling radars is being installed in Colorado, and a fourth site is planned. The location of the five radars, their characteristics, and their limitations are described.

Strauch, R. G.↗

Acoustic remote probing of the environment

Atmospheric acoustic probes located either at shore locations near the Chesapeake Bay or on large surface buoys could obtain profiles of wind velocity and turbulence and the temperature and humidity of the atmosphere. At or near the buoy locations, underwater probes located on the bottom could be used to profile current velocity, density, and turbulence and also to determine tide level, wave height, spectrum, and direction. The physical parameter profiles at these earth-surface stations could be used with surface observations by satellite. The most obvious use of data from such a network is to verify and calibrate models of energy exchange between the water of the Bay and the atmosphere.

Pijanowski, J. A.↗

Experimental measurement of the rapid mixing of fuel and air in a multi-element diffusion (Hencken) burner

Flat flame burners are valuable tools for studying complex combustion phenomena like particle synthesis due to the well-controlled and well-behaved initial and boundary conditions. In this study, the methane/air flame temperature and tracer density profiles of a multi-element diffusion burner equipped with a central tube were characterized using krypton (Kr) x-ray fluorescence at the Advanced Photon Source at Argonne National Laboratory. The experiments were performed using a fuel-to-oxygen equivalence ratio of 0.8 and 3.3% Kr by volume was added to the reactant gases. One- and two-dimensional scans of non-combusting (i.e., cold flow) and combusting conditions, both with and without flow through the central tube were performed. Spatially-resolved Kr number density profiles were obtained at different planar locations and heights above the surface of the burner. The results show rapid mixing occurred near the exit-plane of the burner and increased spatial uniformity was achieved from 0.1 mm to 0.5 mm above the surface of the burner. Further, the data also showed the impact of the central tube flow on the main methane/air flame, including evidence of the central tube flow mixing with the main flow. Flame temperatures were calculated from the fluorescence measurements at various heights above the burner surface and were in good agreement with model predictions for a burner stabilized flame. These high-fidelity measurements provide accurate baseline data that are particularly valuable for understanding the effects of fuel and air mixing on downstream phenomena, such as the formation of condensed-phase products.

42 ENGINEERING↗

Prospective, Risk-Adapted Strategy of Stereotactic Body Radiotherapy for Early-Stage Non-Small-Cell Lung Cancer: Results of a Phase II Trial

Purpose: Validation of a prospective, risk-adapted strategy for early-stage non-small-cell lung cancer (NSCLC) patients treated with stereotactic body radiotherapy (SBRT). Methods and Materials: Patients with a T1-3N0M0 (American Joint Committee on Cancer 6th edition) NSCLC were accrued. Using the Radiation Therapy Oncology Group definition, patients were treated to a total dose of 60,Gy in three fractions for peripherally located lesions and four fractions for centrally located lesions. The primary endpoint was toxicity, graded according to the Radiation Therapy Oncology Group acute and late morbidity scoring system, and the National Cancer Institute Common Terminology Criteria for Adverse Events Version 3.0. Secondary endpoints were local control and survival. Results: A total of 40 patients were included, 17 with a centrally located lesion. The lung toxicity-free survival estimate at 2 years was 74% and was related to the location (central vs. peripheral) and the size of the target volume. No dose volumetric parameters could predict the occurrence of lung toxicity. One patient died because of treatment-related toxicity. The 1-year and 2-year local progression-free survival estimates were 97% and 84%, respectively, and were related to stage (T1 vs. T2) related (p = 0.006). Local failure was not more frequent for patients treated in four fractions. The 1-year local progression-free survival estimate dropped below 80% for lesions with a diameter of more than 4 cm. Conclusion: The proposed risk-adapted strategy for both centrally and peripherally located lesions showed an acceptable toxicity profile while maintaining excellent local control rates. The correlation between local control and tumor diameter calls for the inclusion of tumor stage as a variable in future study design.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modeling charging behavior of battery electric vehicle drivers: A cumulative prospect theory based approach

The behavior of drivers in charging a battery electric vehicle (BEV) can be influenced by psychological factors such as personality and risk preference. This paper proposes a cumulative prospect theory (CPT) based modeling framework to describe the charging behavior of BEV drivers. CPT captures an individual’s attitude and preference toward risk in the decision-making process. A BEV mass-market scenario is constructed using the 2017 National Household Travel Survey (NHTS) data. This work applies the CPT-based charging behavior model to study the battery state-of-charge (SOC) when drivers decide to charge their vehicles, charging timing and location choices, and charging power demand profile under the mass-market scenario. In addition, sensitivity analyses are used to examine the drivers’ risk attitudes and public charger network coverage. BEV drivers who reflect a higher degree of risk-seeking tend to charge vehicles at a lower SOC. Some home charging shifts to workplace and public charging as the public charger network expands, but home charging still plays the most significant role in BEV use. The power demand from public chargers increases critically with BEV expansion and has a larger impact on the power grid. The time-of-use (TOU) electricity rate can shift peak power demand to off-peak periods from midnight to early morning.

2017 National Household Travel Survey (NHTS)↗

Tungsten diffusion in silicon

Two doses (10{sup 13} and 10{sup 15} cm{sup −2}) of tungsten (W) atoms were implanted in different Si(001) wafers in order to study W diffusion in Si. The samples were annealed or oxidized at temperatures between 776 and 960 °C. The diffusion profiles were measured by secondary ion mass spectrometry, and defect formation was studied by transmission electron microscopy and atom probe tomography. W is shown to reduce Si recrystallization after implantation and to exhibit, in the temperature range investigated, a solubility limit close to 0.15%–0.2%, which is higher than the solubility limit of usual metallic impurities in Si. W diffusion exhibits unusual linear diffusion profiles with a maximum concentration always located at the Si surface, slower kinetics than other metals in Si, and promotes vacancy accumulation close to the Si surface, with the formation of hollow cavities in the case of the higher W dose. In addition, Si self-interstitial injection during oxidation is shown to promote W-Si clustering. Taking into account these observations, a diffusion model based on the simultaneous diffusion of interstitial W atoms and W-Si atomic pairs is proposed since usual models used to model diffusion of metallic impurities and dopants in Si cannot reproduce experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SMA observations of C{sub 2}H in high-mass star-forming regions

C{sub 2}H is a representative hydrocarbon that is abundant and ubiquitous in the interstellar medium. To study its chemical properties, we present Submillimeter Array observations of the C{sub 2}H N = 3–2 and HC{sub 3}N J = 30–29 transitions and the 1.1 mm continuum emission toward four OB cluster-forming regions, AFGL 490, ON 1, W33 Main, and G10.6-0.4, which cover a bolometric luminosity range of ∼10{sup 3}–10{sup 6} L{sub ⊙}. We found that on large scales, the C{sub 2}H emission traces the dense molecular envelope. However, for all observed sources, the peaks of C{sub 2}H emission are offset by several times 10{sup 4} AU from the peaks of 1.1 mm continuum emission, where the most luminous stars are located. By comparing the distribution and profiles of C{sub 2}H hyperfine lines and the 1.1 mm continuum emission, we find that the C{sub 2}H column density (and abundance) around the 1.1 mm continuum peaks is lower than those in the ambient gas envelope. Chemical models suggest that C{sub 2}H might be transformed to other species owing to increased temperature and density; thus, its reduced abundance could be the signpost of the heated molecular gas in the ∼10{sup 4} AU vicinity around the embedded high-mass stars. Our results support such theoretical prediction for centrally embedded ∼10{sup 3}–10{sup 6} L{sub ⊙} OB star-forming cores, while future higher-resolution observations are required to examine the C{sub 2}H transformation around the localized sites of high-mass star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Drift effects on W7-X divertor heat and particle fluxes

Classical particle drifts are known to have substantial impacts on fluxes of particles and heat through the edge plasmas in both tokamaks and stellarators. Here we present results from the first dedicated investigation of drift effects in the W7-X stellarator. By comparing similar plasma discharges conducted with a forward- and reverse-directed magnetic field, the impacts of drifts could be isolated through the observation of up-down asymmetries in flux profiles on the divertor targets. In low-density plasmas, the radial locations of the strike lines (i.e. peaks in the target heat flux profiles) exhibited discrepancies of up to 3 cm that reversed upon magnetic field reversal. In addition, asymmetric heat loads were observed in regions of the target that are shadowed by other targets from parallel flux from the core plasma. A comparison of these asymmetric features with the footprints of key topological regions of the edge magnetic field on the divertor suggests that the main driver of the asymmetries at low density is poloidal E × B drift due to radial electric fields in the scrape-off layer and private flux region. In higher-density plasmas, upper and lower targets collected non-ambipolar currents with opposite signs that also inverted upon field reversal. Overall, in these experiments, almost all up-down asymmetry could be attributed to the field reversal and, therefore, field-dependent drifts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MILLIMETER EMISSION STRUCTURE IN THE FIRST ALMA IMAGE OF THE AU Mic DEBRIS DISK

We present 1.3 mm ALMA Cycle 0 observations of the edge-on debris disk around the nearby, {approx}10 Myr old, M-type star AU Mic. These observations obtain 0.''6 (6 AU) resolution and reveal two distinct emission components: (1) the previously known dust belt that extends to a radius of 40 AU and (2) a newly recognized central peak that remains unresolved. The cold dust belt of mass {approx}1 M{sub Moon} is resolved in the radial direction with a rising emission profile that peaks sharply at the location of the outer edge of the 'birth ring' of planetesimals hypothesized to explain the midplane scattered light gradients. No significant asymmetries are discerned in the structure or position of this dust belt. The central peak identified in the ALMA image is {approx}6 times brighter than the stellar photosphere, which indicates an additional emission process in the inner regions of the system. Emission from a stellar corona or activity may contribute, but the observations show no signs of temporal variations characteristic of radio-wave flares. We suggest that this central component may be dominated by dust emission from an inner planetesimal belt of mass {approx}0.01 M{sub Moon}, consistent with a lack of emission shortward of 25 {mu}m and a location {approx}<3 AU from the star. Future millimeter observations can test this assertion, as an inner dust belt should be readily separated from the central star at higher angular resolution.

79 ASTRONOMY AND ASTROPHYSICS↗

DNA dynamics play a role as a basal transcription factor in the positioning and regulation of gene transcription initiation

We assess the role of DNA breathing dynamics as a determinant of promoter strength and transcription start site (TSS) location. We compare DNA Langevin dynamic profiles of representative gene promoters, calculated with the extended non-linear PBD model of DNA with experimental data on transcription factor binding and transcriptional activity. Our results demonstrate that DNA dynamic activity at the TSS can be suppressed by mutations that do not affect basal transcription factor binding–DNA contacts. We use this effect to establish the separate contributions of transcription factor binding and DNA dynamics to transcriptional activity. Our results argue against a purely ‘transcription factor-centric’ view of transcription initiation, suggesting that both DNA dynamics and transcription factor binding are necessary conditions for transcription initiation

59 BASIC BIOLOGICAL SCIENCES↗

Two transcription factors are necessary for iron homeostasis in a salt-dwelling archaeon

Because iron toxicity and deficiency are equally life threatening, maintaining intracellular iron levels within a narrow optimal range is critical for nearly all known organisms. However, regulatory mechanisms that establish homeostasis are not well understood in organisms that dwell in environments at the extremes of pH, temperature, and salinity. Under conditions of limited iron, the extremophile Halobacterium salinarum, a salt-loving archaeon, mounts a specific response to scavenge iron for growth. Here, we have identified and characterized the role of two transcription factors (TFs), Idr1 and Idr2, in regulating this important response. An integrated systems analysis of TF knockout gene expression profiles and genome-wide binding locations in the presence and absence of iron has revealed that these TFs operate collaboratively to maintain iron homeostasis. In the presence of iron, Idr1 and Idr2 bind near each other at 24 loci in the genome, where they are both required to repress some genes. By contrast, Idr1 and Idr2 are both necessary to activate other genes in a putative a feed forward loop. Even at loci bound independently, the two TFs target different genes with similar functions in iron homeostasis. We discuss conserved and unique features of the Idr1–Idr2 system in the context of similar systems in organisms from other domains of life.

59 BASIC BIOLOGICAL SCIENCES↗

Determining the 9 $\mathrm{Be}$($n, γ$) 10 $\mathrm{Be}$ integral cross section at fission neutron energies

The 9 B neutron capture cross section has significant implications for Be materials in the nuclear industry as well as the α process in stellar nucleosynthesis. While the cross section is well constrained at thermal neutron energies, there is a lack of experimental data at higher neutron energies, and the evaluated nuclear data libraries can differ by up to two orders of magnitude. We calculate the 9 Be(n, γ) 10 Be integral cross section at fission neutron energies in an effort to resolve disagreements amongst the nuclear data libraries. Foil irradiation experiments were performed using the Flattop critical assembly at the National Criticality Experiments Research Center with either the highly enriched U or Pu cores, with target foil stacks placed at multiple locations to exploit different neutron energy profiles. Accelerator mass spectrometry was used to measure the 10 Be/ 9 Be ratio in irradiated Be foils, while all other activation products were quantified through gamma spectrometry. The experiments were simulated using the Monte Carlo N-Particle radiation transport code and combined with experimental results to determine the total neutron fluence, while the staysl-pnnl suite and fispact-ii code were used to validate the model and assess the systematic uncertainty. The new 9 Be(n, γ) 10 Be integral cross sections calculated in this work are 26.5 ± 2.2µb at 0.59 ± 0.07 MeV, 24 ± 3 µb at 0.98 ± 0.14 MeV, 21.7 ± 1.3 µb at 1.26 ± 0.11 MeV, 21.8 ± 1.4 µb at 1.32 ± 0.11 MeV, and 18.6 ± 1.1 µb at 1.46 ± 0.13 MeV. These results do not agree with integral cross sections from any of the nuclear data library evaluations. Discrepancies between the new integral cross sections reported here and the nuclear data libraries suggest a more complex cross-section structure in the MeV range which allows for more resonance contributions, and more work is needed to further constrain the evaluated cross sections.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modeling Multiphase Effects in CO 2 Compressors at Subcritical Inlet Conditions

An advanced numerical framework to model CO 2 compressors over a wide range of subcritical conditions is presented in this paper. Thermodynamic and transport properties are obtained through a table look-up procedure with specialized features for subcritical conditions. Phase change is triggered by the difference between the local values of pressure and saturation pressure, and both vaporization and condensation can be modeled. Rigorous validation of the framework is presented for condensation in high pressure CO 2 using test data in a De Laval nozzle. The comparisons between computations and test data include: condensation onset locations, Wilson line, and nozzle pressure profiles as a function of inlet pressures. The framework is applied to the Sandia compressor that has been modeled over broad range of conditions spanning the saturation dome including: near critical inlet conditions (305.4 K, and 7.843 MPa), pure liquid inlet conditions (at 295 K), pure vapor inlet conditions (at 302 K), and two-phase inlet conditions (at 290 K). Multiphase effects ranging from cavitation at the liquid line to condensation at the vapor line have been simulated. Here, the role of real fluid effects in enhancing multiphase effects at elevated temperatures closer to the critical point has been identified. The performance of the compressor has been compared with test data; the computational fluid dynamics (CFD) results also show that the head-flow coefficient curve collapses with relatively minor scatter, similar to the test data, when the flow coefficient is defined on the impeller exit meridional velocity.

14 SOLAR ENERGY↗