SEARCH · Engineering Papers

Results for “Localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Helicopter local blade circulation calculations for a model rotor in forward flight using laser velocimeter measurements

A program is described whose purpose was to develop the measurement and data processing techniques necessary to accurately compute the local rotor blade circulation at any azimuth and radius in a wind tunnel environment at representative forward speeds. With these techniques, further tests using a complex rotor system with local surface pressure measurements should help to determine the accuracy of the technique for general applications to rotor blade span-load measurement programs in wind tunnel forward flight conditions. Preliminary calculations are reported.

Hoad, Danny R.↗

NASA NTRS1991

Analysis of matrix cracking and local delamination in (O/theta/-theta)sub s graphite epoxy laminates under tension load

Several 3D finite element analyses of (O/theta/-theta)sub s graphite epoxy laminates, where theta = 15, 20, 25, 30, and 45 deg, subjected to axial tension load were performed. The interlaminar stresses in the theta/-theta interface were calculated with and without a matrix crack in the central -theta plies. The interlaminar normal stress changes from a small compressive stress when no matrix crack is present to a high tensile stress at the intersection of the matrix crack and free edge. The analysis of local delamination from the -theta matrix crack indicates a high strain energy release rate and a localized mode I component near the free edge, within one ply distance from the matrix crack. In order to examine the stress state causing the matrix cracking the maximum principal normal stress in a plane perpendicular to the fiber direction in the -theta ply was calculated in an uncracked laminate. The corresponding shear stress parallel to the fiber was also calculated. The principal normal stress at the laminate edge increases through the ply thickness and reached a very high tensile value at the theta/-theta interface indicating that the crack in the -theta ply may initiate at the theta/-theta interface. Crack profiles on the laminate edge in the -theta ply were constructed from the principal stress directions. The cracks were found to be more curved for layups with smaller theta angles, which is consistent with experimental observations in the literature.

Salpekar, S. A.↗

NASA NTRS1992

Low-latitude particle precipitation and associated local magnetic disturbances

The paper investigates the O(+) ion and NO(+) ion temperature and temperature anisotropy for a spatially homogeneous auroral F region in the presence of large electric fields perpendicular to the geomagnetic field. The maximum optical emissions at midlatitudes occur in concert with the maximum positive (northward) excursions in the H trace and with rapid fluctuations in the D trace of nearby magnetograms. The source of the particles is inferred to be the ring current, with precipitation occurring when the Dst index is large at the time of the large short-term excursions in the local magnetic field. This result is consistent with the finding of Voss and Smith (1979), derived from a series of rocket measurements of precipitating heavy particles, that the flux correlates better with the product of Dst and the exponential of Kp than with either alone. It is shown that the product of Dst and the amplitude of the short-term excursions in the horizontal component in local magnetograms has better time resolution and better correlation with the observed emission rates than the index using Kp.

Rassoul, H. K.↗

NASA NTRS1992

Local thermodynamic mapping for effective liquid density-functional theory

The structural-mapping approximation introduced by Lutsko and Baus (1990) in the generalized effective-liquid approximation is extended to include a local thermodynamic mapping based on a spatially dependent effective density for approximating the solid phase in terms of the uniform liquid. This latter approximation, called the local generalized effective-liquid approximation (LGELA) yields excellent predictions for the free energy of hard-sphere solids and for the conditions of coexistence of a hard-sphere fcc solid with a liquid. Moreover, the predicted free energy remains single valued for calculations with more loosely packed crystalline structures, such as the diamond lattice. The spatial dependence of the weighted density makes the LGELA useful in the study of inhomogeneous solids.

Kyrlidis, Agathagelos↗

NASA NTRS1992

Local interactions in renormalization methods for Navier-Stokes turbulence

Two distinct renormalization-group (RG) approaches are applied to Navier-Stokes turbulence: epsilon-RG and recursive RG. Epsilon-RG takes into account only nonlocal interactions and utilizes an infinitesimal subgrid (unresolvable scale) shell limit. Recursive RG takes into account both nonlocal and local interactions and does not require an infinitesimal subgrid shell limit to be taken. The role of local interactions and the introduction of RG-induced nonlinearities are discussed and clarified.

Zhou, YE↗

NASA NTRS1993

A fuzzy controller with nonlinear control rules is the sum of a global nonlinear controller and a local nonlinear PI-like controller

The fuzzy controllers studied in this paper are the ones that employ N trapezoidal-shaped members for input fuzzy sets, Zadeh fuzzy logic and a centroid defuzzification algorithm for output fuzzy set. The author analytically proves that the structure of the fuzzy controllers is the sum of a global nonlinear controller and a local nonlinear proportional-integral-like controller. If N approaches infinity, the global controller becomes a nonlinear controller while the local controller disappears. If linear control rules are used, the global controller becomes a global two-dimensional multilevel relay which approaches a global linear proportional-integral (PI) controller as N approaches infinity.

Ying, Hao↗

NASA NTRS1993

Analysis of the effects of mean local node-crossing time on the evolution of Sun-synchronous orbits

An investigation of the effect of mean local node-crossing time on the evolution of Sun-synchronous orbits was undertaken during Phase-A orbit analysis for the National Oceanic and Atmospheric Administration (NOAA) O,P,Q environmental spacecraft. That analysis added to the growing body of evidence that individual Sun-synchronous missions, at differing node-crossing times, experience nodal drift rates that can differ in both magnitude and direction. A Sun-synchronous orbit is obtained by means of a nodal drift rate approximating the 0.9856-degree-per-day apparent precession of the position of the mean Sun. This drift rate is achieved through the interaction of the orbital semimajor axis and inclination in Earth's geopotential field. Influencing perturbations include atmospheric drag and, most important, the effects of solar gravitation on inclination. The present analysis examines a series of Sun-synchronous orbits with mean local node-crossing times at 1-hour intervals from 6 a.m. to 6 p.m. It considers the fixed geometry of each orbital plane with respect to both the Sun and the diurnal atmospheric bulge, then analyzes the influence of these features upon the evolution of the semimajor axix and inclination and thus upon the rate of the nodal drift in the course of 1 year.

Jordan, P.↗

NASA NTRS1991

Lunar rovers and local positioning system

Telerobotic rovers equipped with adequate actuators and sensors are clearly necessary for extraterrestrial construction. They will be employed as substitutes for humans, to perform jobs like surveying, sensing, signaling, manipulating, and the handling of small materials. Important design criteria for these rovers include versatility and robustness. They must be easily programmed and reprogrammed to perform a wide variety of different functions, and they must be robust so that construction work will not be jeopardized by parts failures. The key qualities and functions necessary for these rovers to achieve the required versatility and robustness are modularity, redundancy, and coordination. Three robotic rovers are being built by CSC as a test bed to implement the concepts of modularity and coordination. The specific goal of the design and construction of these robots is to demonstrate the software modularity and multirobot control algorithms required for the physical manipulation of constructible elements. Each rover consists of a transporter platform, bus manager, simple manipulator, and positioning receivers. These robots will be controlled from a central control console via a radio-frequency local area network (LAN). To date, one prototype transporter platform frame was built with batteries, motors, a prototype single-motor controller, and two prototype internal LAN boards. Software modules were developed in C language for monitor functions, i/o, and parallel port usage in each computer board. Also completed are the fabrication of half of the required number of computer boards, the procurement of 19.2 Kbaud RF modems for inter-robot communications, and the simulation of processing requirements for positioning receivers. In addition to the robotic platform, the fabrication of a local positioning system based on infrared signals is nearly completed. This positioning system will make the rovers into a moving reference system capable of performing site surveys. In addition, a four degree mechanical manipulator especially suited for coordinated teleoperation was conceptually designed and is currently being analyzed. This manipulator will be integrated into the rovers as their end effector. Twenty internal LAN cards fabricated by a commercial firm are being used, a prototype manipulator and a range finder for a positioning system were built, a prototype two-motor controller was designed, and one of the robots is performing its first telerobotic motion. In addition, the robots' internal LAN's were coordinated and tested, hardware design upgrades based on fabrication and fit experience were completed, and the positioning system is running. The rover system is able to perform simple tasks such as sensing and signaling; coordination systems which allow construction tasks to begin were established, and soon coordinated teams of robots in the laboratory will be able to manipulate common objects.

Avery, James↗

NASA NTRS1991

The X-ray flux dipole of AGNs as an indicator of the local gravitational field

We have investigated the dipole anisotropy of the sky X-ray flux from nearby AGNs to compare with the peculiar motion of the Local Group (LG) using a more extensive sample than that of Miyaji and Boldt (1990). We have sampled 56 low redshift emission-line AGNs (z less than 0.06) from the HEAO 1 A-2 experiment with a flux limit lower than that of Piccinotti et al. (1982) and with a lower galactic latitude cutoff. Our sample shows a significant dipole anisotropy whose apex is only about 30 deg away from the direction of the Local Group's peculiar motion for the objects with z less than 0.015. The dipole growth vs. redshift shows a sharp rise between z = 0.006 and z = 0.015; the amplitude of the dipole is 40 +/- 10 percent of the corresponding monopole at z = 0.015. The outer redshift cutoff is consistent with the results obtained from analyses using optical and IRAS galaxies. The present sample strengthens our previous conclusion that X-ray emission from AGNs traces the underlying mass distribution as strongly as optical and IR emission from galaxies.

Miyaji, Takamitsu↗

NASA NTRS1993

A multiple-mode three-dimensional model of VLF propagation in the earth-ionosphere waveguide in the presence of localized D region disturbances

Transient localized D region disturbances, such as those associated with lightning discharges, affect the characteristics of VLF waves propagating in the Earth-ionosphere waveguide. In particular, both phase and amplitude changes in the subionospheric signal can be observed at receiving sites as a result of the wave scattering that takes place in the disturbed region. In the present paper we present a multiple-mode three-dimensional model of VLF propagation in the Earth-ionosphere waveguide in the presence of localized D region disturbances. The model takes into account great circle (GC) propagation paths with realistic ground and ionospheric conductivity changes that result in mode conversion along the path. It is assumed that conductivity changes transverse to the GC paths are negligible except in the vicinity of the D region disturbance and that mode coupling is negligible within the disturbed region. This new model is applied to experimental observations and is found to be in general agreement. The diagnostics potential of the model for characterizing energetic particle precipitation events is discussed.

Poulsen, William L.↗

NASA NTRS1993

The Geminga supernova as a possible cause of the Local Interstellar Bubble

It is proposed that the Local Bubble was caused by the SN that produced the Geminga pulsar. The pulsar's 300,000-year age is used in conjunction with the motion of a recently discovered optical counterpart to verify that the SN was well-positioned for production of the Local Bubble if the explosion occurred within 60 pc of the solar system.

Gehrels, Neil↗

NASA NTRS1993

Extreme ultraviolet observations of G191-B2B and the local interstellar medium with the Hopkins Ultraviolet Telescope

During the Astro-l mission in 1990 December, the Hopkins Ultraviolet Telescope (HUT) was used to observe the extreme ultraviolet spectrum (415-912 A) of the hot DA white dwarf GI91-B2B. Absorption by neutral helium shortward of the 504 A He I absorption edge is clearly detected in the raw spectrum. Model fits to the observed spectrum require interstellar neutral helium and neutral hydrogen column densities of 1.45 +/- 0.065 x 10 exp 17/sq cm and 1.69 +/- 0.12 x 10 exp 18/sq cm, respectively. Comparison of the neutral columns yields a direct assessment of the ionization state of the local interstellar cloud surrounding the Sun. The neutral hydrogen to helium ratio of 11.6 +/- 1.0 observed by HUT strongly contradicts the widespread view that hydrogen is much more ionized than helium in the local interstellar medium, a view which has motivated some exotic theoretical explanations for the supposed high ionization.

Kimble, Randy A.↗

NASA NTRS1993

Vibration localization in mono- and bi-coupled bladed disks - A transfer matrix approach

A transfer matrix approach to the analysis of the dynamics of mistuned bladed disks is presented. The study focuses on mono-coupled systems, in which each blade is coupled to its two neighboring blades, and bi-coupled systems, where each blade is coupled to its four nearest neighbors. Transfer matrices yield the free dynamics, both the characteristic free wave and the normal modes - in closed form for the tuned assemblies. Mistuned assemblies are represented by random transfer matrices and an examination of the effect of mistuning on harmonic wave propagation yields the localization factor - the average rate of spatial wave amplitude decay per blade - in the mono-coupled assembly. Based on a comparison of the wave propagation characteristics of the mono- and bi-coupled assemblies, important conclusions are drawn about the effect of the additional coupling coordinate on the sensitivity to mistuning and the strength of mode localization predicted by a mono-coupled analysis.

Ottarsson, Gisli↗

NASA NTRS1993

(C-12)/(C-13) isotope ratio in the local interstellar medium from observations of (C-13)(O-18) in molecular clouds

The paper examines the (C-12)/(C-13) isotope ratio in the solar neighborhood on the basis of observations of the (C-12)(O-18) and (C-13)(O-18) J = 1-0 transitions in four interstellar clouds located within 500 pc. The (C-12)/(C-13) ratio in these sources ranges from 57 to 74, and its weighted average is 62 +/- 4, with thermal noise and line formation uncertainties contributing about equally to the probable error. These values indicate moderate chemical evolution in the local star neighborhood since the formation of the solar system, in good agreement with model prediction of the current carbon ratio in the local interstellar medium.

Langer, William D.↗

NASA NTRS1993

Solution of free-boundary problems using finite-element/Newton methods and locally refined grids - Application to analysis of solidification microstructure

A new method is presented for the solution of free-boundary problems using Lagrangian finite element approximations defined on locally refined grids. The formulation allows for direct transition from coarse to fine grids without introducing non-conforming basis functions. The calculation of elemental stiffness matrices and residual vectors are unaffected by changes in the refinement level, which are accounted for in the loading of elemental data to the global stiffness matrix and residual vector. This technique for local mesh refinement is combined with recently developed mapping methods and Newton's method to form an efficient algorithm for the solution of free-boundary problems, as demonstrated here by sample calculations of cellular interfacial microstructure during directional solidification of a binary alloy.

Tsiveriotis, K.↗

NASA NTRS1992

Local gravitomagnetic perturbations of the lunar orbit

Using the metric in the local inertial frame of the Earth, we calculate relativistic effects on the lunar orbit with the synodic month period. It is shown that such perturbations arise entirely from the gravitomagnetic components of the local metric which exist because of the relative motion of the sun with respect to the Earth. In the case of general relativity, the net perturbation has an amplitude of 3 cm for the lunar range.

Shahid-Saless, Bahman↗

NASA NTRS1993

Global-, local-, and intermediate-scale structures in prototype spiral galaxies

The relationship between galactic spiral structure and the matter in the underlying disk constitutes one of the central problems in galactic dynamics. In Bertin et al. (1989), disk matter characterized by a low-dispersive speed is shown to be capable of playing a key role in the generation of large-scale spiral structure. In Roberts et al. (1992), this self-gravitating, low-dispersion disk matter is shown to be capable of playing an essential role in the formation of structure on local and intermediate scales. Both in computed cases where large-scale spiral structure is present and in those where it is not, the same dominant physical processes and fundamental dynamical mechanisms are active on local scales. The new perception, in which large-scale and small-scale phenomena operate somewhat independently as evidenced in the computational studies, permits a range of flocculent, multiarmed, and grand design spiral types to be simulated. In particular, grand design galaxies with ragged appearances exhibiting spurs, arm branchings, and interarm bridges in addition to the major spiral arms, similar to those often observed, can be generated.

Roberts, William W., Jr.↗

NASA NTRS1993

Analysis of matrix cracking and local delamination in (0/theta/-theta)s graphite epoxy laminates under tensile load

Three-dimensional element analyses of (0/theta/-theta)s graphite epoxy laminates, where theta = 15, 20, 25, 30, and 45 deg, subjected to axial tensile load, were performed. The interlaminar stresses in the theta/-theta interface were calculated with and without a matrix crack in the central -theta plies. The interlaminar normal stress changes from a small compressive stress when no matrix crack is present to a high tensile stress at the intersection of the matrix crack and the free edge. The analysis of local delamination from the -theta matrix crack indicates a high strain energy release rate and a localized Mode I component near the free edge, within one-ply distance from the matrix crack. To examine the stress state causing the matrix cracking, the maximum principal normal stress in a plane perpendicular to the fiber direction in the -theta ply was calculated in an uncracked laminate. The corresponding shear stress parallel to the fiber was also calculated. The principal normal stress at the laminate edge increased through the ply thickness and reached a very high tensile value at the theta/-theta interface indicating that the crack in the -theta ply may initiate at the theta/-theta interface.

Salpekar, S. A.↗