Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JuMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Mixed-state geometric phases of coherent and squeezed spin states

Two mixed-state geometric phases, known as the Uhlmann phase and interferometric geometric phase (IGP), of spin coherent states (CSSs) and spin squeezed states (SSSs) are analyzed. Exact solutions and numerical results of selected examples are presented. For the 𝑗=3/2 CSS, the Uhlmann phase exhibits finite-temperature topological phase transitions characterized by abrupt jumps. The IGP for the same state similarly shows discontinuous jumps as the temperature varies. In the case of the 𝑗=1 one-axis SSS, both the Uhlmann phase and IGP display discrete finite-temperature jumps. By contrast, the 𝑗=1 two-axis SSS shows no such transitions because the Uhlmann phase and IGP both vary smoothly with temperature. Here, we also briefly discuss potential realizations and simulations related to these phenomena in spin systems.

Geometric & topological phases↗

Interaction quenches of Fermi gases

It is shown that the jump in the momentum distribution of Fermi gases evolves smoothly for small and intermediate times once an interaction between the fermions is suddenly switched on. The jump does not vanish abruptly. The loci in momentum space where the jumps occur are those of the noninteracting Fermi sea. No relaxation of the Fermi surface geometry takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent control of atomic excitation using off-resonant strong few-cycle pulses

We study the dynamics of a two-level system driven by an off-resonance few-cycle pulse which has a phase jump {phi} at t=t{sub 0}, in contrast to many-cycle pulses, under the nonrotating-wave approximation (NRWA). We give a closed form analytical solution for the evolution of the probability amplitude |C{sub a}(t)| for the upper level. Using the appropriate pulse parameters like the phase jump {phi}, jump time t{sub 0}, pulse width {tau}, frequency {nu}, and Rabi frequency {Omega}{sub 0} the population transfer after the pulse is gone can be optimized and, for the pulse considered here, an enhancement factor of 10{sup 6}-10{sup 8} was obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of conformational changes in complex molecules on photon statistics of single molecule fluorescence

A single complex molecule with conformational changes (conformations 0 and 2) is considered. When such a molecule is irradiated by cw-laser light it can randomly change the intensity or polarization of its fluorescence due to jumps from one conformation to another. In fact, the molecule manifests itself either like the 0-type or the 2-type emitter. An expression for the matrix s{sub {alpha}{beta}}(t) called the start-stop correlator (waiting time distribution) in which {alpha}=0,2 and {beta}=0,2 is derived. An expression for the matrix p{sub {alpha}{beta}}(t) called the full correlator is derived as well. It determines the density of the probability of finding an event of {alpha} type and an event of {beta} type separated by time interval t. A relation between matrices s{sub {alpha}{beta}}(t) and p{sub {alpha}{beta}}(t) is found. A mathematical expression for the distribution w{sub N}(T) of events measured in time interval T is derived. It is expressed solely via the matrix s{sub {alpha}{beta}}(t). Numerical calculations of the event distribution function for various rates of intra- and interconformational jumps are carried out with the help of the formula for w{sub N}(T) and by the Monte Carlo method. Both methods of the calculation yield identical distributions. Fluctuating fluorescence intensity I(t) for a bin time of 5 ms is calculated for slow and fast interconformational jumps. A relation is found between the autocorrelation function g{sup (2)}(t) of fluorescence measurable in experiments and the matrix p{sub {alpha}{beta}}(t) calculated theoretically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shapiro steps and stability of skyrmions interacting with alternating anisotropy under the influence of ac and dc drives

Here we use atomistic simulations to examine the sliding dynamics of a skyrmion in a two-dimensional system containing a periodic one-dimensional stripe pattern of variations between low and high values of the perpendicular magnetic anisotropy. The skyrmion changes in size as it crosses the interface between two anisotropy regions. On applying combined dc and ac driving in either parallel or perpendicular directions, we observe a wide variety of Shapiro steps, Shapiro spikes, and phase-locking phenomena. The phase-locked orbits have two-dimensional dynamics due to the gyrotropic or Magnus dynamics of the skyrmions and are distinct from the phase-locked orbits found for strictly overdamped systems. Along a given Shapiro step when the ac drive is perpendicular to the dc drive, the velocity parallel to the ac drive is locked while the velocity in the perpendicular direction increases with increasing drive to form Shapiro spikes. At the transition between adjacent Shapiro steps, the parallel velocity jumps up to the next step value, and the perpendicular velocity drops. The skyrmion Hall angle shows a series of spikes as a function of increasing dc drive, where the jumps correspond to the transition between different phase-locked steps. At high drives, the Shapiro steps and Shapiro spikes are lost. When both the ac and dc drives are parallel to the stripe periodicity direction, Shapiro steps appear, while if the dc drive is parallel to the stripe periodicity direction and the ac drive is perpendicular to the stripe periodicity, then there are only two locked phases, and the skyrmion motion consists of a combination of sliding along the interfaces between the two anisotropy values and jumping across the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extending the range of validity of Fourier's law into the kinetic transport regime via asymptotic solution of the phonon Boltzmann transport equation

We derive the continuum equations and boundary conditions governing phonon-mediated heat transfer in the limit of a small but finite mean-free path from the asymptotic solution of the linearized Boltzmann equation in the relaxation time approximation. Our method uses the ratio of the mean-free path to the characteristic system length scale, also known as the Knudsen number, as the expansion parameter to study the effects of boundaries on the breakdown of the Fourier description. We show that, in the bulk, the traditional heat conduction equation using Fourier's law as a constitutive relation is valid at least up to second order in the Knudsen number for steady problems and first order for time-dependent problems. Yet, this description does not hold within distances on the order of a few mean-free paths from the boundary; this breakdown is a result of kinetic effects that are always present in the boundary vicinity and require solution of a Boltzmann boundary layer problem to be determined. Matching the inner, boundary layer solution to the outer, bulk solution yields boundary conditions for the Fourier description as well as additive corrections in the form of universal kinetic boundary layers; both are found to be proportional to the bulk-solution gradients at the boundary and parametrized by the material model and the phonon-boundary interaction model (Boltzmann boundary condition). Our derivation shows that the traditional no-jump boundary condition for prescribed temperature boundaries and the no-flux boundary condition for diffusely reflecting boundaries are appropriate only to zeroth order in the Knudsen number; at higher order, boundary conditions are of the jump type. We illustrate the utility of the asymptotic solution procedure by demonstrating that it can be used to predict the Kapitza resistance (and temperature jump) associated with an interface between two materials. All results are validated via comparisons with low-variance deviational Monte Carlo simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A kinetic equation for linear stable fractional motion with applications to space plasma physics

Levy flights and fractional Brownian motion have become exemplars of the heavy-tailed jumps and long-ranged memory widely seen in physics. Natural time series frequently combine both effects, and linear fractional stable motion (lfsm) is a model process of this type, combining {alpha}-stable jumps with a memory kernel. In contrast complex physical spatiotemporal diffusion processes where both the above effects compete have for many years been modeled using the fully fractional kinetic equation for the continuous-time random walk (CTRW), with power laws in the probability density functions of both jump size and waiting time. We derive the analogous kinetic equation for lfsm and show that it has a diffusion coefficient with a power law in time rather than having a fractional time derivative like the CTRW. We discuss some preliminary results on the scaling of burst 'sizes' and 'durations' in lfsm time series, with applications to modeling existing observations in space physics and elsewhere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase behavior of DODAB aqueous solution

Phase behavior of DODAB aqueous solution, prepared without sonication, was studied by adiabatic scanning calorimetry. Measurements revealed four phase transitions with the temperatures 35.2, 39.6, 44.6, and 52.4 Degree-Sign C at heating and one transition at the temperature 40.4 Degree-Sign C at cooling. The first three transitions at heating occur in unilamellar vesicles. The first and third transitions correspond to the subgel-gel and gelliquid phase transitions, corresponding enthalpy jumps are equal to 33 and 49 kJ/mol. The second transition appears after some aging and is similar to gel-ripple phase transition in a DPPC solution, with the enthalpy jump under the transition exceeding 7.4 kJ/mol. The transition occurs in unilamellar vesicles. The transition at the temperature 52.4 Degree-Sign C occurs in another subsystem of the solution, which we believe to be multilamellar vesicles. The enthalpy jump at this transition is equal to 97 kJ/mol, and data analysis suggests that this is a subgel-liquid transition. The phase transition at cooling is the liquid-gel transition in unilamellar vesicles. During the measurements, a slow evolution of the solution occurs, consisting in a change of concentrations of unilamellar and multilamellar vesicles. This transformation mainly occurs at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polaron-like vortices, dissociation transition, and self-induced pinning in magnetic superconductors

Vortices in magnetic superconductors polarize spins nonuniformly and repolarize them when moving. At a low spin relaxation rate and at low bias currents, vortices carrying magnetic polarization clouds become polaron-like and their velocities are determined by the effective drag coefficient that is significantly bigger than the Bardeen-Stephen (BS) one. As the current increases, vortices release polarization clouds and the velocity as well as the voltage in the I-V characteristics jump to values corresponding to the BS drag coefficient at a critical current J{sub c}. The nonuniform components of the magnetic field and magnetization drop as the velocity increases, resulting in weaker polarization and a discontinuous dynamic dissociation depinning transition. Experimentally, the jump shows up as a depinning transition and the corresponding current at the jump is the depinning current. As the current decreases, on the way back, vortices are retrapped by polarization clouds at the current J{sub r} < J{sub c}. As a result, the polaronic effect suppresses dissipation and enhances the critical current. Borocarbides (RE)Ni{sub 2}B{sub 2}C with a short penetration length and highly polarizable rare earth spins seem to be optimal systems for a detailed study of vortex polaron formation by measuring I-V characteristics. We also propose to use a superconductor-magnet multilayer structure to study polaronic mechanism of pinning with the goal to achieve high critical currents. The magnetic layers should have large magnetic susceptibility to enhance the coupling between vortices and magnetization in magnetic layers while the relaxation of the magnetization should be slow. For Nb and a proper magnet multilayer structure, we estimate the critical current density J{sub c} {approx} 10{sup 9} A/m{sup 2} at the magnetic field B Almost-Equal-To 1 T.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-Temperature Magnetic Properties of Superconducting Indium Nanocomposites in Opal Matrix

We studied magnetic properties of the In–opal nanocomposite, which is a close-packed system of SiO{sub 2} spheres of the same diameter D with metal-filled cavities (series of opal structures with D = 190, 230, and 290 nm were studied). The dependencies of the samples’ magnetization m on temperature T, as well as on external magnetic field H, were measured at various temperatures below the critical temperature T{sub c} of the superconducting (SC) transition. The critical temperature T{sub c} and the critical magnetic field H{sub c} were measured. Magnetization jumps were observed in m(H) dependences at temperatures below 2.6 K. It was found that the jumps are quasiperiodic as functions of H, and the number of jumps increases both with increase in the sweeping rate dH/dt, as well as with decrease in the characteristic size of the In inclusions in the nanocomposite. A model describing the breakup of the SC state with an increase in the external magnetic field is proposed. According to this model, when the screening current reaches a critical value in the near-surface layer of the nanocomposite, an avalanche-like penetration of the field into the volume of the nanocomposite occurs. After this, the SC state is restored, and the magnetic field “freezes” in the structure of the nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adhesion-force micro-scale study of desiccating granular material

Experiments on five-, four-, three- and two-wet-hydrophilic-grain clusters were performed to investigate evolution of adhesion of granular media during drying on the micro-scale. The experiments show that the adhesion-force of a cluster initially grows at most to three times the original value before decreasing to zero by the end of evaporation. The adhesion-force is composed of capillary pressure force acting over the liquid/solid contact surface area, and surface tension forces acting over the three-phase contact perimeter length. This is in contrast with most macro-scale phenomenological models, in which the only desaturation process variables affecting strength are suction and saturation. Both the contact surface area and contact perimeter length are reduced to zero upon complete liquid evaporation. The morphology of an evaporating water body evolves through slow flow controlled by evaporation rate, interrupted by various modes of fast air entry, which are non-equilibrium jumps of liquid/gas interfaces (Haines jumps). The instabilities involve large adhesion force discontinuities and substantial water mass reconfiguration with water flow in an extremely short time, which makes the process transient. The reconfigurations can reduce the original multi-grain water clusters to four-, three- and two-grain clusters by way of three different instability modes: of thin-sheet instability, or meniscus snap-through instability, depending on the sign of the Gauss curvature of the liquid surface, or finally, for two-grain bridges only, a liquid wire pinch-off. For larger meso-scale assemblies, however, the global adhesion-force evolution is little affected by the jumps. The air entries are potential sites for drying cracks. The (approximately) calculated capillary pressure for two- and three-grain clusters, in no cases is seen to reach high values, predicted from water retention curves.

Engineering↗

Open Source Fault-tolerant Grid Frequency Measurement for Solar Inverters

The Discrete Fourier transform (DFT) based measurement algorithms are one of the most common measurement algorithms for grid parameter estimation such as rms, phase angle, frequency. Over the past few years, many DFT based algorithms have been developed to enhance its measurement accuracy under steady-state and/or dynamic grid conditions. For example, an adaptive band-pass filter utilizing exponential modulation filter has been proposed to reduce measurement errors at the presence of large frequency deviations. Measurement accuracy of different algorithms including FIR filter, extended Kalman filtering (EKF), and enhanced DFT method have been compared in detail under different grid conditions. Two artificial signals that have 90-degree phase difference were constructed by the Clarke transformation to address the frequency spectrum leakage of DFT. A multi-module approach was developed to enhance both steady-state and dynamic measurement accuracies, in which each module was developed to eliminate some specific errors. Besides DFT-based measurement algorithms, some signal model-based algorithms have been developed to further improve the accuracy under dynamic conditions. However, a key drawback of the state-of-the-art algorithms is that they cannot perform measurements accurately during system transient faults. In the Blue Cut Fire event, there was a phase angle jump of about 26 degrees in the voltage waveform during the transient fault. The phase angle jump fault will cause waveform discontinuity, and these algorithms will fail to provide reliable measurements during this period because they typically assume the waveform to be measured is continuous, no matter what method (DFT, PLL, EKF, FIR, or Taylor WLS) is used for estimation. In fact, the measurement errors during the system transient faults like phase-jump is not required in the IEEE Standard. As a result, although a measurement instrument can pass the strict IEEE Standard, it could still be the source of the problem in the future if we have similar system transient faults, which could happen again. Therefore, developing the fault-tolerant measurement technology is the key to solve the problem.

14 SOLAR ENERGY↗

Symmetry Determining Equations of the Rankine-Hugoniot Equations for Variable Velocity Shock Waves

The “constant velocity piston” problem (Fig. 1), also known as the “piston problem,” is a standard model for a one dimensional, in our case linear, symmetric shock wave moving through an inviscid, perfect gas. The model can be divided into two regions - a perturbed section on the left and an unperturbed section on the right - by a moving shock wave moving left to right. Both the perturbed and unperturbed sections, i.e. the shocked and unshocked regions, respectively, obey the Eulerian conservation equations; however, at the exact location of the shock, there is a mathematical discontinuity not satisfied by the Euler equations. To ensure continuity and conservation of certain quantities when crossing between the unshocked and shocked regions, we evoke a series of equations derived from the Eulerian conservation equations, called the Rankine-Hugoniot equations, or “jump” equations as it is often referred to in the literature on the topic. The classical constant-velocity piston problem assumes the piston features a constant driving velocity (among many other willing suspensions of belief required in the pursuit of a first principles equation model); consequent to this assumption is a constant-velocity shock and a constant-velocity shocked flow state. However, using Lie Group Theory (LGT), also known as symmetry analysis, we can attempt to reinterpret the model with a shock wave of variable velocity in time and space. An extension of the model in this way opens up the possibility for obtaining new analytical solutions to the piston problem for certain shock velocity models. In this report, we use LGT to derive the symmetry determining equations (SDEs), whose solutions are Lie groups, which permit analytical solutions. In the future, we can then use the SDEs to define constraint equations on the shock velocity model and what the successive solutions to the Euler equations might be based off such constraints. This report is structured as follows: Section 2 provides a brief derivation of the Rankine-Hugoniot (“jump”) equations; Section 3 gives an overview of Lie group theory; Section 4 derives the SDEs of the jump equations; Section 5 derives the Euler conservation equations for fluids; and Section 6 presents concluding remarks and opportunities for future studies.

42 ENGINEERING↗

Performance Evaluation of a Microgrid System with Grid-Forming and Grid-Following Inverters with Diesel Generators: Insights From Hardware Experiments

This paper presents a comprehensive performance evaluation of a microgrid system integrating grid-forming (GFM) inverters, grid-following (GFL) inverters, and a diesel generator, focusing on their interactions and behavior under various dynamic events. The study is conducted using a pure hardware setup comprising two GFM inverters, one GFL inverter, a diesel generator, load banks, a point of common coupling (PCC), and an emulated main grid. The evaluation specifically examines dynamic scenarios, including voltage jumps, phase jumps, rate of change of frequency (ROCOF), synchronization, and islanding operations, which pose critical challenges to system stability. Among all the tests conducted, the overloading and phase jump tests proved to be the most challenging. The capacity of the DC side is crucial for withstanding overloading and grid disturbance tests; otherwise, GFM inverters frequently trip due to DC undervoltage. Throughout all grid disturbance tests, the diesel generator consistently stands out as the most robust and reliable GFM unit in the system. Overall, insights from these hardware experiments shed light on the response characteristics of different generation types during grid disturbances and identify potential stability concerns in such hybrid microgrid systems.

14 SOLAR ENERGY↗

DOWNWARD CATASTROPHE OF SOLAR MAGNETIC FLUX ROPES

2.5-dimensional time-dependent ideal magnetohydrodynamic (MHD) models in Cartesian coordinates were used in previous studies to seek MHD equilibria involving a magnetic flux rope embedded in a bipolar, partially open background field. As demonstrated by these studies, the equilibrium solutions of the system are separated into two branches: the flux rope sticks to the photosphere for solutions at the lower branch but is suspended in the corona for those at the upper branch. Moreover, a solution originally at the lower branch jumps to the upper, as the related control parameter increases and reaches a critical value, and the associated jump is here referred to as an upward catastrophe. The present paper advances these studies in three aspects. First, the magnetic field is changed to be force-free; the system still experiences an upward catastrophe with an increase in each control parameter. Second, under the force-free approximation, there also exists a downward catastrophe, characterized by the jump of a solution from the upper branch to the lower. Both catastrophes are irreversible processes connecting the two branches of equilibrium solutions so as to form a cycle. Finally, the magnetic energy in the numerical domain is calculated. It is found that there exists a magnetic energy release for both catastrophes. The Ampère's force, which vanishes everywhere for force-free fields, appears only during the catastrophes and does positive work, which serves as a major mechanism for the energy release. The implications of the downward catastrophe and its relevance to solar activities are briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

The Dependence of Electron-only Magnetic Reconnection on Plasma Beta and Magnetic Shear: Theory and Observations

We investigate the onset conditions for electron-only magnetic reconnection through an analysis of 86 reconnection events observed by the Magnetospheric Multiscale mission in magnetosheath and magnetospheric current sheets. Our study presents the first observational evidence that the occurrence of electron-only reconnection depends on both the magnetic-field shear angle (θ) across the current sheet and the cross-sheet electron beta jump, quantified either by the inflow electron beta difference (Δβ e ) or by a modified electron beta jump (Δβ$^*_e$) defined by the cross-sheet electron pressure difference normalized by the average of the inflow magnetic pressure in the two inflow regions. We extend the diamagnetic-drift suppression mechanism from standard reconnection to electron-only reconnection by deriving relations applicable to electron-scale current sheets. Using scaling estimates, the electron-only reconnection suppression relation is derived as Δβ$^*_e$ ≳ 2(L/d e ) tan (θ/2), while a natural extension of the ion-coupled reconnection suppression criterion is Δβ e ≳ 2(L/d e ) tan (θ/2). At low Δβ e and Δβ$^*_e$ values, reconnection is detected across a large range of magnetic shear (from low to high), whereas high Δβ e and Δβ$^*_e$ conditions restrict reconnection to large shear configurations: shear angles as small as θ ≈ 5° occur when Δβ e (or Δβ$^*_e$) ≲0.1. However, only events exceeding θ ≳ 70° are found when Δβ e ≳ 1.0; this apparent restriction weakens when employing Δβ$^*_e$, as the corresponding data points shift toward smaller values of the modified electron beta jump. These findings quantitatively support theoretical predictions of reconnection suppression in high-β e plasmas at low shears, attributed to X-line drift induced by pressure gradients across electron-scale current sheets.

79 ASTRONOMY AND ASTROPHYSICS↗

JPL pulsar timing observations - Spinups in PSR 0525+21

Observations of the very slow objects PSR 0525+21, in which two small spin-ups occur, are presented. Twelve years of observation at 2.4 GHz reveal that the ratio of small jumps to the period is about one billionth, where the period is about 3.745 s; the analysis that arrived at these results is shown. The short-term behavior following the larger jump suggests an exponential decay, and long-term changes in the period derivative of about 0.03 percent clearly persist after each jump. It is argued that the spin-ups are not due to starquakes, but may be caused by uncoupling of a lighter crust from the core.

Downs, G. S.↗

Altitude transitions in energy climbs

The aircraft energy-climb trajectory for configurations with a sharp transonic drag rise is well known to possess two branches in the altitude/Mach-number plane. Transition in altitude between the two branches occurs instantaneously, a 'corner' in the minimum-time solution obtained with the energy-state model. If the initial and final values of altitude do not lie on the energy-climb trajectory, then additional jumps (crude approximations to dives and zooms) are required at the initial and terminal points. With a singular-perturbation approach, a 'boundary-layer' correction is obtained for each altitude jump, the transonic jump being a so-called 'internal' boundary layer, different in character from the initial and terminal layers. The determination of this internal boundary layer is examined and some computational results for an example presented.

Weston, A. R.↗