Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Instrument optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Optimal redesign study of the harm wing

The purpose of this project was to investigate the use of optimization techniques to improve the flutter margins of the HARM AGM-88A wing. The missile has four cruciform wings, located near mid-fuselage, that are actuated in pairs symmetrically and antisymmetrically to provide pitch, yaw, and roll control. The wings have a solid stainless steel forward section and a stainless steel crushed-honeycomb aft section. The wing restraint stiffness is dependent upon wing pitch amplitude and varies from a low value near neutral pitch attitude to a much higher value at off-neutral pitch attitudes, where aerodynamic loads lock out any free play in the control system. The most critical condition for flutter is the low-stiffness condition in which the wings are moved symmetrically. Although a tendency toward limit-cycle flutter is controlled in the current design by controller logic, wing redesign to improve this situation is attractive because it can be accomplished as a retrofit. In view of the exploratory nature of the study, it was decided to apply the optimization to a wing-only model, validated by comparison with results obtained by Texas Instruments (TI). Any wing designs that looked promising were to be evaluated at TI with more complicated models, including body modes. The optimization work was performed by McIntosh Structural Dynamics, Inc. (MSD) under a contract from TI.

Mcintosh, S. C., Jr.↗
NASA NTRSDate not supplied

Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (METRIC): A Payload Designed for Exploration of Terrestrial Planetary Bodies

Geological materials (indeed, all solid objects) are characterized by their crystal structure, elemental composition, and morphology. The Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (METRIC) instrument suite quantifies all three. These measurements address fundamental science questions (e.g., the origin and evolution of planetary bodies) and support the human exploration of space (e.g., the characterization of regolith for ISRU and the constraint of its geotechnical properties). METRIC comprises an X-ray Diffraction/X-ray Fluorescence instrument (XRD: mineral structure and XRF: elemental composition), an X-ray micro-Computed Tomography instrument (XCT: 3D internal micromorphology), and a hyperspectral imaging infrared spectrometer (IRS) to provide local/regional mineralogic context for these measurements. METRIC XRD/F draws heritage from the highly successful Mars Science Laboratory CheMin instrument. The METRIC XRD/F employs two separate sample cells, one optimized for XRD and one for XRF, resulting in more rapid XRD analysis (tens of minutes vs. tens of hours for CheMin) and an orders-of-magnitude improvement in XRF detection. XCT has not been deployed in space, so the METRIC XCT represents a new capability for solar system exploration. The XCT uses the same basic high-TRL components as METRIC XRD/F, decreasing its development cost for flight. The METRIC IRS is a derivative of the NASA Earth Science Technology Office funded Hyperspectral Thermal Imager instrument and utilizes the NASA Technology Transfer Program to incorporate a commercial-of-the-shelf infrared camera ruggedized for space by NASA Marshall Space Flight Center. The IRS spectral range (8–14 µm) and resolution (10.8 cm -1 ) are tailored to quantify mineralogy in rocks using their characteristic Reststrahlen bands and to characterize mineralogy of soils using the position of the Christensen Feature. The METRIC payload is currently designed for deployment to the Moon on a Commercial Lunar Payload Services (CLPS) mission, where the XRD/F and XCT would be located on a lander and the IRS would be on deployed on a companion rover to evaluate the mineralogical diversity of the landing site. A pneumatic drill designed by Honeybee Robotics would excavate regolith up to 50 cm below the lander and deliver multiple aliquots of regolith to the XRD/F and XCT. The METRIC payload could also be deployed on a rover. In this case, a sample handling system on a robotic arm could scoop regolith and/or drill rocks and deliver powder to the XRD/F and XCT located in the rover’s interior. Alternatively, METRIC instruments could be used singly or in combination on human space missions. The XRD/F and XCT could be used to characterize samples in a rover or in a science laboratory within a habitat. These data could help astronauts identify resource-enriched rocks and regolith and triage geologic samples to return samples of high interest for analysis in terrestrial laboratories. The IRS could be attached to a human-navigated rover to collect mineralogical data along a traverse and identify high-priority science samples.

E. B. Rampe↗
NASA NTRS2016

The GPM Combined Algorithm

In this paper, the operational Global Precipitation Measurement (GPM) mission combined radar-radiometer algorithm is thoroughly described. The operational combined algorithm is designed to reduce uncertainties in GPM Core Observatory precipitation estimates by effectively integrating complementary information from the GPM Dual-Frequency Precipitation Radar (DPR) and the GPM Microwave Imager (GMI) into an optimal, physically consistent precipitation product. Although similar in many respects to previously developed combined algorithms, the GPM combined algorithm has several unique features that are specifically designed to meet the GPM objectives of deriving, based on GPM Core Observatory information, accurate and physically consistent precipitation estimates from multiple spaceborne instruments, and ancillary environmental data from reanalyses. The algorithm features an optimal estimation framework based on a statistical formulation of the Gauss-Newton method, a parameterization for the nonuniform distribution of precipitation within the radar fields of view, a methodology to detect and account for multiple scattering in Ka-band DPR observations, and a statistical deconvolution technique that allows for an efficient sequential incorporation of radiometer information into DPR precipitation retrievals.

Grecu, Mircea↗
DOE OSTI2024

Properties of Nb x Ti (1–x) N thin films deposited on 300 mm silicon wafers for upscaling superconducting digital circuits

Scaling superconducting digital circuits requires fundamental changes in the current material set and fabrication process. The transition to 300 mm wafers and the implementation of advanced lithography are instrumental in facilitating mature CMOS processes, ensuring uniformity, and optimizing the yield. Here, this study explores the properties of Nb x Ti (1–x) N films fabricated by magnetron DC sputtering on 300 mm Si wafers. As a promising alternative to traditional Nb in device manufacturing, Nb x Ti (1–x) N offers numerous advantages, including enhanced stability and scalability to smaller dimensions, in both processing and design. As a ternary material, Nb x Ti (1–x) N allows engineering material parameters by changing deposition conditions. The engineered properties can be used to modulate device parameters through the stack and mitigate failure modes. We report characterization of Nb x Ti (1–x) N films at less than 2% thickness variability, 2.4% T c variability and 3% composition variability. Film resistivity (140–375 Ωcm) shows a strong correlation with the film oxygen content, while the critical temperature T c (4.6 K–14.1 K) is strongly affected by film stoichiometry and its microstructure has only a moderate effect on modifying T c . Our results offer insights about the interplay between film stoichiometry, film microstructure and critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Leveraging Existing Assets for Long Duration Energy Storage

Increased renewables penetration to electrical grid is necessary to reduce overall emissions from the electrical power generation sector. Nonetheless, its integration creates challenges to grid operators who must match the power being generated by intermittent renewables and other traditional energy sources with the demand from consumers, while ensuring the reliability and power quality for the entire system. Energy storage has been proposed as an alternative to natural gas peaking plants and a form to deliver excess renewable energy generation at times of peak demand. For energy storage to provide benefits to end customers (energy consumers), it must be reliable, efficient, and cost effective. The Illinois Sustainable Technology Center (ISTC), one of the surveys that integrate the Prairie Research Institute (PRI), aims to develop a Center for Energy Storage at Existing Assets (CESEA) at UIUC with the participation of Waste Pressure Corp and Ecotek Engineering USA LLC. CESEA will focus on LDES systems that can integrate to existing infrastructure in a manner that reduces the initial capital expenditure and demonstrates the ability to repurpose fossil assets that would otherwise become stranded, to serve the energy transition. CESEA aims to leverage UIUC’s unique facilities to validate LDES systems performance at a relevant operating environment. UIUC’s facilities include a 85-MW combined heat and power (CHP) power plant, two (2) solar PV plants totaling over 18 MWdc of installed capacity, an electrical grid along with a substation at transmission and distribution voltages, a 22-mile gas pipeline network operating at two pressure levels, along with steam and chilled water distribution networks. The new LDES systems will connect to the existing UIUC grid through a new test electrical station, which will have the capacity to accommodate additional connections to test new devices and technologies as part of future CESEA R&D activities. The test electrical station will contain meters, instrumentation, and controls to accurately capture data and allow optimization of control algorithms. CESEA will initially focus on technologies that: i) utilize existing equipment or facilities to perform at least one of the process steps in LDES (charging, storage, or discharging), ii) leverage mature or commercially available components or controls, iii) show potential for cost-leadership in 10+ hour storage at a commercial scale. Initial technologies that were identified to meet these criteria include Compressed Gas Energy Storage (CGES), and TES. CGES stores electricity by raising the pressure of a compressible gas inside a control volume and converting the stored energy to electricity via expansion-generation. CGES is a generalization of CAES that covers any working gas (not just air). A successful CGES demo will help to circumvent many challenges faced by CAES (long development times due to site prospecting, high cost of compression and storage, heat recovery management, etc.) by: 1) utilizing existing infrastructure (compressors, pipelines, underground storage or pressure vessels) used in the transportation and storage of industrial gases for LDES charging and storage; 2) deploying over sites already-developed for industrial applications with minor additional work; 3) leveraging the price structure of commercial industrial gas to cover the costs of electricity used during charging. A previous DOE-sponsored conceptual study (DE-FE-0032018) estimated the levelized cost of energy of a 1.1 MW / 17 MWh CGES system at $0.08/kWh, with a commercial 10x scale system cost estimated at <$0.04/kWh (Giardinella, 2022). The pilot-sized system was estimated to avoid up to 2693 tons of CO2/year.

25 ENERGY STORAGE↗
DOE OSTI2026

RHOD Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily NetCDF files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Rhode Island (RHOD). WINDoe retrievals datasets are also available at Nantucket Island (NANT, nant.windoe.z01.c1) and Block Island (BLOC, bloc.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main) and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
DOE OSTI2026

BLOC Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily netcdf files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Block Island (BLOC). WINDoe retrievals datasets are also available at Nantucket Island (NANT, nant.windoe.z01.c1) and Rhode Island (RHOD, rhod.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main), and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
DOE OSTI2026

NANT Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily NetCDF files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Nantucket Island (NANT). WINDoe retrievals datasets are also available at Block Island (BLOC, bloc.windoe.z01.c1) and Rhode Island (RHOD, rhod.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main), and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
NASA NTRS1971

Real time control of the observing program of an Orbiting Solar Observatory.

Discussion of some innovations in the ground control optimization of the modes of data acquisition once an instrument is in orbit, as illustrated by the Harvard experiment on OSO 6. A detailed description is given of the instrumentation on board OSO 6 which provided a capability of performing spatial scans of the solar disk and the ability to obtain the spectra of selected features on the solar disk. The method of receiving and displaying the data transmitted by the satellite in real time is described, as well as the procedure followed in developing preflight observing objectives and in evaluating completed observations. A typical process of data acquisition to obtain wavelength scans of selected features on the solar disk is illustrated, and a number of collaborative investigations involving simultaneous coordinated observations from the ground and from space are cited.

Reeves, E. M.↗
NASA NTRS1974

Peripheral visual response time to colored stimuli imaged on the horizontal meridian

Two male observers were administered a binocular visual response time task to small (45 min arc), flashed, photopic stimuli at four dominant wavelengths (632 nm red; 583 nm yellow; 526 nm green; 464 nm blue) imaged across the horizontal retinal meridian. The stimuli were imaged at 10 deg arc intervals from 80 deg left to 90 deg right of fixation. Testing followed either prior light adaptation or prior dark adaptation. Results indicated that mean response time (RT) varies with stimulus color. RT is faster to yellow than to blue and green and slowest to red. In general, mean RT was found to increase from fovea to periphery for all four colors, with the curve for red stimuli exhibiting the most rapid positive acceleration with increasing angular eccentricity from the fovea. The shape of the RT distribution across the retina was also found to depend upon the state of light or dark adaptation. The findings are related to previous RT research and are discussed in terms of optimizing the color and position of colored displays on instrument panels.

Haines, R. F.↗
NASA NTRS1990

Earth Observing Scanning Polarimeter (EOSP), phase B

Evaluations performed during a Phase B study directed towards defining an optimal design for the Earth Observing Scanning Polarimeter (EOSP) instrument is summarized. An overview of the experiment approach is included which provides a summary of the scientific objectives, the background of the measurement approach, and the measurement method. In the instrumentation section, details of the design are discussed starting with the key instrument features required to accomplish the scientific objectives and a system characterization in terms of the Stokes vector/Mueller matrix formalism. This is followed by a detailing of the instrument design concept, the design of the individual elements of the system, the predicted performance, and a summary of appropriate instrument testing and calibration. The selected design makes use of key features of predecessor polarimeters and is fully compatible with the Earth Observing System spacecraft requirements.

Source record↗
NASA NTRS1994

Synthetic aperture radar signal data compression using block adaptive quantization

This paper describes the design and testing of an on-board SAR signal data compression algorithm for ESA's ENVISAT satellite. The Block Adaptive Quantization (BAQ) algorithm was selected, and optimized for the various operational modes of the ASAR instrument. A flexible BAQ scheme was developed which allows a selection of compression ratio/image quality trade-offs. Test results show the high quality of the SAR images processed from the reconstructed signal data, and the feasibility of on-board implementation using a single ASIC.

Kuduvalli, Gopinath↗
NASA NTRS1998

A Numerical Optimization Approach for Tuning Fuzzy Logic Controllers

This paper develops a method to tune fuzzy controllers using numerical optimization. The main attribute of this approach is that it allows fuzzy logic controllers to be tuned to achieve global performance requirements. Furthermore, this approach allows design constraints to be implemented during the tuning process. The method tunes the controller by parameterizing the membership functions for error, change-in-error and control output. The resulting parameters form a design vector which is iteratively changed to minimize an objective function. The minimal objective function results in an optimal performance of the system. A spacecraft mounted science instrument line-of-sight pointing control is used to demonstrate results.

Woodard, Stanley E.↗
NASA NTRS2003

Integrated Propulsion/Vehicle System Structurally Optimized

Ongoing research and testing are essential in the development of air-breathing hypersonic propulsion technology, and this year some positive advancement was made at the NASA Glenn Research Center. Recent work performed for GTX, a rocket-based combined-cycle, single-stage-to-orbit concept, included structural assessments of both the engine and flight vehicle. In the development of air-breathing engine technology, it is impractical to design and optimize components apart from the fully integrated system because tradeoffs must be made between performance and structural capability. Efforts were made to control the flight trajectory, for example, to minimize the aerodynamic heating effects. Structural optimization was applied to evaluate concept feasibility and was instrumental in the determination of the gross liftoff weight of the integrated system. Achieving low Earth orbit with even a small payload requires an aggressive approach to weight minimization through the use of lightweight, oxidation-resistant composite materials. Assessing the integrated system involved investigating the flight trajectory to determine where the critical load events occur in flight and then generating the corresponding environment at each of these events. Structural evaluation requires the mapping of the critical flight loads to finite element models, including the combined effects of aerodynamic, inertial, combustion, and other loads. NASA s APAS code was used to generate aerodynamic pressure and temperature profiles at each critical event. The radiation equilibrium surface temperatures from APAS were used to predict temperatures through the thickness. Heat transfer solutions using NASA's MINIVER code and the SINDA code (Cullimore & Ring Technologies, Littleton, CO) were calculated at selective points external to the integrated vehicle system and then extrapolated over the entire exposed surface. FORTRAN codes were written to expedite the finite element mapping of the aerodynamic heating effects for the internal structure.

Hunter, James E.↗
NASA NTRS1999

CF2 Detection in Radio-Frequency Ar/CHF3 Plasmas by Fourier Transform Infrared Spectroscopy

CFx radicals, in particular CF2, are instrumental in anisotropic etching of SiO2. In order to optimize the CFx radical population in a given process environment, it is imperative that we understand their production mechanism. Towards this goal, we have conducted a series of quantitative measurements of CF2 radicals in low pressure RF plasmas similar to those used in SiO2 etching. In this study, we present preliminary results for Ar/CHF3 plasmas operating at pressures ranging from 10-50 mTorr and powers ranging from 100-500 W in the GEC reference cell, modified for inductive (transformer) coupling. Fourier transform infrared (FTIR) spectroscop) is used to observe the absorption features of the CF2 radical in the 1114 cm-1 and 1096 cm-1 spectral regions. The FTIR spectrometer is equipped with a high-sensitivity mercury cadmium telluride (MCT) detector and has afixed resolution of 0.125 cm- 1. The CF2 concentrations are measured for a range of operating pressures and discharge power levels, and are compared to measurements of the relative CF2 concentrations made by mass spectrometry using the method of appearance potential for radical selectivity.

Kim, J. S.↗
NASA NTRS2018

Geostationary Lightning Mapper On-Orbit Sources of False Events

The first Geostationary Lightning Mapper (GLM) was launched aboard the GOES-R Spacecraft (now GOES-East) on November 19, 2016 and is now fully operational. GLM uses a high-speed camera and onboard video processing to detect the optical emission of lightning for the full disk observed from the geostationary orbit. During the Post Launch Test period the instrument and ground processing algorithms (GPAs) were tuned to optimize the tradeoff between detection efficiency and false event rate. False events, those not due to lightning, arise from a variety of sources. A primary function of the GPAs is to remove false events prior to assembling events into groups and flashes for use by weather forecasters and scientists. Effective discrimination of false events depends on understanding the phenomenology of the various sources of false events.

GOES-R↗
NASA NTRS2024

Future of the Search for Life: Workshop Report

The 2-week, virtual Future of the Search for Life science and engineering workshop brought together more than 100 scientists, engineers, and technologists in March and April 2022 to provide their expert opinion on the interconnections between life-detection science and technology. Participants identified the advances in measurement and sampling technologies they believed to be necessary to perform in situ searches for life elsewhere in our Solar System, 20 years or more in the future. Among suggested measurements for these searches, those pertaining to three potential indicators of life termed “dynamic disequilibrium,” “catalysis,” and “informational polymers” were identified as particularly promising avenues for further exploration. For these three indicators, small breakout groups of participants identified measurement needs and knowledge gaps, along with corresponding constraints on sample handling (acquisition and processing) approaches for a variety of environments on Enceladus, Europa, Mars, and Titan. Despite the diversity of these environments, sample processing approaches all tend to be more complex than those that have been implemented on missions or envisioned for mission concepts to date. The approaches considered by workshop breakout groups progress from nondestructive to destructive measurement techniques, and most involve the need for fluid (especially liquid) sample processing. Sample processing needs were identified as technology gaps. These gaps include technology and associated sampling strategies that allow the preservation of the thermal, mechanical, and chemical integrity of the samples upon acquisition; and to optimize the sample information obtained by operating suites of instruments on common samples. Crucially, the interplay between science-driven life-detection strategies and their technological implementation highlights the need for an unprecedented level of payload integration and extensive collaboration between scientists and engineers, starting from concept formulation through mission deployment of life-detection instruments and sample processing systems.

Marc Neveu↗
NASA NTRS1985

Optimization studies for the development of adaptive wall wind tunnel

The development of adaptive wall wind tunnels makes it possible to establish interference-free boundaries in the region of the model. It is, therefore, feasible to simulate free air conditions. However, the amount of total testing time involved in establishing the required conditions and the complexity of the needed instrumentation prevent currently the use of such methods for routine production testing. Optimization studies have been proposed with the objective to find approaches which will make a more extended application of adaptive wall techniques possible. A new 25cm x 11cm adaptive wall test section was designed and installed to carry out some of these studies. Investigations envisaged are related to the development of a one step convergence method to reduce total testing time, and to measurement procedures which will permit a simplification of the instrumentation. Attention is given to the proposed concept, the test section, instrumentation, and the influence coefficients.

Bodapati, S.↗