Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Impact Assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Probabilistic Voltage Sensitivity Analysis to Quantify Impact of High PV Penetration on Unbalanced Distribution System

From an operational and planning perspective, it is important to quantify the impact of increasing penetration of photovoltaics on the distribution system. Most existing impact assessment studies are scenario-based where derived results are scenario specific and not generalizable. Moreover, stochasticity in the temporal behavior of spatially distributed PVs requires a large number of scenarios that increase with the size of the network and the level of penetration. Therefore, we propose a new computationally efficient analytical framework of voltage sensitivity analysis that allows for stochastic analysis of voltage change due to random changes in PV generation. We first derive an analytical approximation for voltage change at any node of the network due to change in power at other nodes in an unbalanced distribution network. The quality of this approximation is reinforced via bounds on the approximation error. Then, we derive the probability distribution of voltage change at a certain node due to random changes in power injections/consumptions at multiple locations of the network. The accuracy of the proposed PVSA is illustrated using a modified version of the IEEE 37 bus test system. As a result, the proposed PVSA can serve as a powerful tool for proactive monitoring/control and ease the computational burden associated with perturbation based cybersecurity mechanisms.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2013

It's the Heat AND the Humidity -- Assessment of Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health

In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. In a NASA-funded project supporting the National Climate Assessment, we are providing historical and future measures of extreme heat to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The project s emphasis is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM output, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons, 2040 and 2090, are the focus of future assessments; these are compared to the recent past period of 1981-2000. We are characterizing regional-scale temperature and humidity conditions using GCM output for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM output have been analyzed to develop a heat stress climatology based on statistics of extreme heat indicators. Differences between the two future and past periods have been used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes, combined with hourly historical meteorological data at a spatial scale (12 km) much finer than that of GCMs, enable us to create future climate realizations, from which we compute the daily heat stress measures and related spatially-specific climatological fields. These include the mean annual number of days above certain thresholds of maximum and minimum air temperatures, heat indices and a new heat stress variable that gives an integrated measure of heat stress (and relief) over the course of a day. Comparisons are made between projected (2040 and 2090) and past (1990) heat stress statistics. All output is being provided at the 12 km spatial scale and will also be aggregated to the county level, which is a popular scale of analysis for public health researchers. County-level statistics will be made available by our collaborators at the Centers for Disease Control and Prevention (CDC) via the Wide-ranging Online Data for Epidemiologic Research (WONDER) system. CDC WONDER makes the information resources of the CDC available to public health professionals and the general public. This addition of heat stress measures to CDC WONDER will allow decision and policy makers to assess the impact of alternative approaches to optimize the public health response to EHEs. It will also allow public health researchers and policy makers to better include such heat stress measures in the context of national health data available in the CDC WONDER system. The users will be able to spatially and temporally query public health and heat-related data sets and create county-level maps and statistical charts of such data across the coterminous U.S.

Crosson, William L↗
DOE OSTI2021

Climate hazard indices projections based on CORDEX-CORE, CMIP5 and CMIP6 ensemble

The CORDEX-CORE initiative was developed with the aim of producing homogeneous regional climate model (RCM) projections over domains world wide. In its first phase, two RCMs were run at 0.22° resolution downscaling 3 global climate models (GCMs) from the CMIP5 program for 9 CORDEX domains and two climate scenarios, the RCP2.6 and RCP8.5. The CORDEX-CORE simulations along with the CMIP5 GCM ensemble and the most recently produced CMIP6 GCM ensemble are analyzed, with focus on several temperature, heat, wet and dry hazard indicators for present day and mid-century and far future time slices. The CORDEX-CORE ensemble shows a better performance than the driving GCMs for several hazard indices due to its higher spatial resolution. For the far future time slice the 3 ensembles project an increase in all temperature and heat indices analyzed under the RCP8.5 scenario. The largest increases are always shown by the CMIP6 ensemble, except for Tx > 35 °C, for which the CORDEX-CORE projects higher warming. Extreme wet and flood prone maxima are projected to increase by the RCM ensemble over the la Plata basin in South America, the Congo basin in Africa, east North America, north east Europe, India and Indochina, regions where a better performance is obtained, whereas the GCM ensembles show small or negligible signals. Furthermore, compound hazard hotspots based on heat, drought and wet indicators are detected in each continent worldwide in region like Central America, the Amazon, the Mediterranean, South Africa and Australia, where a linear relation is shown between the heatwave and drought change signal, and region like Arabian peninsula, the central and south east Africa region (SEAF), the north west America (NWN), south east Asia, India, China and central and northern European regions (WCE, NEU) where the same linear relation is found for extreme precipitation and HW increases. Although still limited, the CORDEX-CORE initiative was able to produce high resolution climate projections with almost global coverage and can provide an important resource for impact assessment and climate service activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Evaluation of CMIP6 models in simulating the statistics of extreme precipitation over Eastern Africa

We report the Eastern Africa region experiences frequent extreme precipitation events that can cause destruction of property and environment, and loss of lives. Thus, there is a need to understand how these events may change in the future and how well the global climate models that are used to make projections can simulate precipitation extremes in this region before they can be used in downscaling or flood and drought impact assessment studies. In this work, we evaluated the ability of sixteen Coupled Model Intercomparison Project Phase 6 (CMIP6) models to simulate present-day precipitation extremes over the Eastern Africa region during the two rainy seasons (March–May and September–November). We used nine extreme precipitation indices (including seven (one) indices of wet (dry) extremes) defined by the Expert Team on Climate Change Detection and Indices. The CMIP6 models were evaluated against two gridded observation datasets: Global Precipitation Climatology Project One-Degree Daily Dataset and Tropical Rainfall Measuring Mission Multi-satellite Precipitation Analysis 3B42. Three model performance metrics (percentage bias, normalized root-mean-square error, and pattern correlation coefficient) were employed to further assess the strengths and weakness of the models. Our results show that the multi-model ensemble mean generally provides a better representation of observed precipitation and related extremes compared to individual models when considering all metrics and seasons. Several consistent biases are evident across CMIP6 models, which tend to overestimate the total-wet day precipitation and consecutive wet days, and underestimate very wet days and maximum 5-day precipitation in both seasons. Furthermore, no single model consistently performs best, model performance varies with the season and index under consideration and is generally independent of horizontal resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improving energy efficiency while reducing anthropogenic heat from buildings: how retrofits influence the building stock and urban microclimate in Los Angeles

Anthropogenic heat (AH) from buildings contributes to urban overheating, especially during heat waves, yet building retrofit studies usually evaluate energy savings without assessing impacts on AH. This study quantifies how common building retrofit measures affect both building energy use and AH emissions across the City of Los Angeles. Using a bottom-up urban building energy modeling framework coupled with high-resolution local weather from the Weather Research and Forecasting model with Building Effect Parameterization (WRF-BEP), we evaluate eleven retrofit measures and two multi-measure retrofit packages. HVAC and LED lighting retrofits provide the largest city-wide annual site energy savings, while roof coating is most effective for reducing AH. A package optimized for energy savings reduces summer site energy use by about 32% (2.3 TWh), while a package incorporating AH-focused measures reduces the total AH by over 50% (137 PJ) with minimal difference in energy savings. The AH-aware package produces substantially greater urban cooling, reducing mean near-surface air temperature by up to 0.62 ℃ and peak temperature by up to 3.79 ℃. These results show that retrofit strategies selected only for energy savings may overlook major opportunities for urban heat mitigation. The study provides a framework for integrating AH into building retrofit planning and urban heat resilience policy.

Anthropogenic heat↗
DOE OSTI2026

KRAS4a and KRAS4b show distinct lipid-dependent regulation of RAS-RAF membrane dynamics

KRAS4a and KRAS4b are important regulators of signaling, and their interactions with the plasma membrane are dynamic and influenced by lipid composition. KRAS 4a and 4b have nearly identical globular domains but differ in their membrane-associated hyper variable region (HVR). The functional distinctions between these isoforms remain unclear, particularly with regards to their dependence on specific lipids and the membrane environment. Previous work showed that the membrane orientation of KRAS4b affects its ability to bind to RAF kinase RBDCRD and that the KRAS–RBDCRD complex adopts different poses on the membrane as well as influences the size and composition of the lipid environment. To model differences between KRAS 4a and 4b protein–lipid interactions, we extended the Multiscale Machine-Learned Modeling Infrastructure (MuMMI) to incorporate continuum simulations in the grand canonical ensemble, enabling sampling across macroscopic, coarse-grained, and all-atom resolutions. Using this framework, we systematically altered PIP2 concentrations, KRAS 4a versus 4b, and RAF RBDCRD complexation to assess impacts on membrane–protein interactions and dynamics. Our results reveal that reducing PIP2 shifts and broadens the membrane orientational preference of both KRAS 4b and 4a, with stronger effects on 4b HVR localization versus 4a. We demonstrate that with depletion of the strong negatively charged PIP2 lipid, the less charged phosphatidylserine replaces PIP2. Our findings highlight similarities and distinctions in the dynamics and lipid dependency of KRAS isoforms and suggest that ordering of the local lipid composition by HVRs is a shared property and key modulator of RAS-mediated signaling at the plasma membrane.

Biological and medical sciences↗
DOE OSTI2024

Ecologically inspired metrics for transitioning to a sustainable and resilient circular economy with application to multilayer plastic films

Current Circular Economy (CE) frameworks applied to product chains exhibit notable shortcomings. These include neglecting the resilience and robustness of design, requiring detailed economic and environmental data for impact assessment, and relying on qualitative rather than quantitative metrics capturing certain CE design aspects. In the current contribution, we addressed these shortcomings by developing an Ecologically inspired (Eco-inspired) Framework using the mathematical foundations of Ecological Network Analysis (ENA). While ENA metrics have previously found application in designing circular economies, particularly in Industrial Symbiosis (IS) networks, our adaptation tailors these metrics for use in product-level CE, recognizing the inherent distinctions between product-level CE and IS. Our Eco-inspired Framework comprises three key categories to provide holistic and granular-level metrics for designing product-level CE. The first set of metrics assesses circularity and resource efficiency. The second set gauges network intensity and robustness as complementary indicators ensuring a CE is both sustainable and resilient. The third group of metrics evaluates enhancement potential of CE strategies through introducing quantitative metrics for measuring the degree of closed-loop strategies and average circularity level of a CE design. The three comprehensive set of indicators within the Eco-inspired Framework uniquely captures various facets of circular design, whether originating from technological innovations and recovery improvement at the end of life (EoL), shifts in human consumption patterns, alterations in product design, or changes in business models. The framework’s application is tested in designing a CE for multilayer Polyethylene-Polyamide (PE-PA) films. Using the Eco-inspired Framework, we identified the best strategy for designing a resilient and sustainable CE for PE-PA films. A diverse set of EoL strategies along with a reduction in product consumption can improve circularity and resilience by 650% and 255%, respectively, and mitigate greenhouse gas emissions by 90%. The framework minimizes trade-offs between sustainability and circularity goals and offers insights on how to enhance each strategy for achieving a resilient and sustainable CE for products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Global Impacts of Marine Methanethiol Emissions and Chemistry in the Atmosphere

Oceanic emissions of dimethyl sulfide (DMS) have long been known to influence aerosol particle composition, cloud condensation nuclei (CCN) concentration, and Earth’s radiative budget. However, the impact of oceanic emissions of methanethiol (MeSH), a sulfur compound produced by the same oceanic precursor as DMS, has been relatively less explored. The gas-phase oxidation of MeSH has a higher effective yield of SO 2 and a shorter oxidative lifetime compared to DMS, highlighting the relevance of this pathway for the modeled representation of particle formation, growth, and CCN abundance in the marine atmosphere. Here, we use the global chemical transport model GEOS-Chem to explore possible scenarios representative of specific environmental conditions and MeSH emission schemes based on previous experimental studies. We further implement and test previously reported chemical mechanisms for MeSH oxidation, along with additional improvements, highlighting key uncertainties and sensitivities for regional and global sulfur budgets. We place our results in the context of recent modeling updates to DMS chemistry and cloud processing, which further impact SO 2 production in the marine atmosphere in parallel with MeSH oxidation. Within the overall marine sulfur budget, our findings highlight that MeSH plays a significant role in SO 2 production in the marine atmosphere, contributing to regional surface layer concentration increases of up to 40–60%. These results point to the importance of MeSH for efforts aimed at improving the modeled representation of sulfur spatiotemporal patterns relevant to air quality predictions and climate impact assessments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Is turning down the sun a good proxy for stratospheric sulfate geoengineering?

Deliberately blocking out a small portion of the incoming solar radiation would cool the climate. One such approach would be injecting SO2 into the stratosphere, which would produce sulfate aerosols that would remain in the atmosphere for 1–3 years, reflecting part of the incoming shortwave radiation. The cooling produced by the aerosols can offset the warming produced by increased greenhouse gas (GHG) concentrations, but it would also affect the climate differently, leading to residual differences compared to a climate not affected by either. Many climate model simulations of geoengineering have used a uniform reduction of the incoming solar radiation as a proxy for stratospheric aerosols, both because many models are not designed to adequately capture relevant stratospheric aerosol processes, and because a solar reduction has often been assumed to capture the most important differences between how stratospheric aerosols and GHG would affect the climate. Here we show that dimming the sun does not produce the same surface climate effects as simulating aerosols in the stratosphere. By more closely matching the spatial pattern of solar reduction to that of the aerosols, some improvements in this idealized representation are possible, with further improvements if the stratospheric heating produced by the aerosols is included. This is relevant both for our understanding of the physical mechanisms driving the changes observed in stratospheric-sulfate geoengineering simulations, and in terms of the relevance of impact assessments that use a uniform solar dimming.

Visioni, Daniele↗
DOE OSTI2022

The Data Synergy Effects of Time-Series Deep Learning Models in Hydrology

When fitting statistical models to variables in geoscientific disciplines such as hydrology, it is a customary practice to stratify a large domain into multiple regions (or regimes) and study each region separately. Traditional wisdom suggests that models built for each region separately will have higher performance because of homogeneity within each region. However, each stratified model has access to fewer and less diverse data points. Here, through two hydrologic examples (soil moisture and streamflow), we show that conventional wisdom may no longer hold in the era of big data and deep learning (DL). We systematically examined an effect we call data synergy, where the results of the DL models improved when data were pooled together from characteristically different regions. The performance of the DL models benefited from modest diversity in the training data compared to a homogeneous training set, even with similar data quantity. Moreover, allowing heterogeneous training data makes eligible much larger training datasets, which is an inherent advantage of DL. A large, diverse data set is advantageous in terms of representing extreme events and future scenarios, which has strong implications for climate change impact assessment. The results here suggest the research community should place greater emphasis on data sharing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

How May the Choice of Downscaling Techniques and Meteorological Reference Observations Affect Future Hydroclimate Projections?

Abstract We present an intercomparison of a suite of high‐resolution downscaled climate projections based on a six‐member General Circulation Model (GCM) ensemble from Coupled Models Intercomparison Project (CMIP6). The CMIP6 GCMs have been downscaled using dynamical and statistical downscaling techniques based on two meteorological reference observations over the conterminous United States. We use the regional climate model, RegCM4, for dynamical downscaling, double bias correction constructed analogs method for statistical downscaling, and Daymet and Livneh datasets as the reference observations for statistical training and bias‐correction. We evaluate the performances of downscaled data in both historical and future periods under the SSP585 scenario. While dynamical downscaling improves the simulation of some performance evaluation indices, it adds an extra bias in others, highlighting the need for statistical correction before its use in impact assessments. Downscaled datasets after bias‐correction compare exceptionally well with observations. However, the choice of downscaling techniques and the underlying reference observations influence the hydroclimate characteristics of downscaled data. For instance, the statistical downscaling generally preserves the GCMs climate change signal but overestimates the frequency of hot extremes. Similarly, simulated future changes are sensitive to the choice of reference observations, particularly for precipitation extremes that exhibit a higher projected increase in the ensembles trained and/or corrected by Daymet than Livneh. Overall, these results demonstrate that multiple factors, including downscaling techniques and reference observations, can substantially influence the outcome of downscaled climate projections and stress the need for a comprehensive understanding of such method‐based uncertainties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Atmospheric River Frequency-Category Characteristics Shape U.S. West Coast Runoff

Abstractrunoff response to atmospheric rivers (ARs) over the U.S. West Coast. We focused on runoff time series variations impacted by AR characteristics (e.g., category and frequency) and land preconditions during Northern Hemisphere cool seasons in the period of 1940–2023. Results show that high-category ARs significantly increase local runoff with higher hourly precipitation rates leading to a greater incremental rate and peak runoff. Extreme runoff increases greatly with the AR category with an increase rate up to 12.5 times stronger than non-extreme runoff. Besides the AR category, land preconditions such as soil moisture and snowpack also play crucial roles in modulating runoff response. We found that runoff induced by weak-category ARs is more sensitive to land preconditions than high-category ARs, with high peak runoff occurring when soil is nearly saturated. Additionally, more than 50% of high-peak-runoff events in snow-covered grid cells are associated with rain-on-snow events particularly for the events associated with weaker ARs. Regression analysis reveals that AR precipitation and land preconditions jointly influence runoff, emphasizing the importance of including soil moisture and snowpack levels in AR impact assessments. The study also highlights the intensified runoff response to back-to-back ARs with short intervals, which may become more frequent with climate warming, posing increased flood risks via facilitating wet soil conditions. Our findings have significant implications for AR risk predictions and the development of prediction models for AR-induced runoff.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

“Which Projections Do I Use?” Strategies for Climate Model Ensemble Subset Selection Based on Regional Stakeholder Needs

Climate model (or earth system model) projections are increasingly used for climate adaptation planning and impact assessments. As part of this process, many end‐users evaluate a subset of downscaled climate projections without being aware of the implications of downscaling methodology for statistics or event outcomes. Approaches for determining a subset of global climate models to use often focus on values from the raw models, rather than from their downscaled counterparts, in other words assuming that the statistical distribution of the multi‐model ensemble does not change post downscaling. This study demonstrates that a downscaled ensemble will typically retain the change distribution as a raw ensemble, but individual models can differ dramatically post‐downscaling. We recommend that subset‐selection methods account for this possibility and that decision‐relevant downscaled climate projections provide proper descriptions of fitness‐for‐purpose and essential caveats, so that non‐specialists can interpret the results with an appropriate level of confidence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Impact of structural biology and the protein data bank on us fda new drug approvals of low molecular weight antineoplastic agents 2019–2023

Abstract Open access to three-dimensional atomic-level biostructure information from the Protein Data Bank (PDB) facilitated discovery/development of 100% of the 34 new low molecular weight, protein-targeted, antineoplastic agents approved by the US FDA 2019–2023. Analyses of PDB holdings, the scientific literature, and related documents for each drug-target combination revealed that the impact of structural biologists and public-domain 3D biostructure data was broad and substantial, ranging from understanding target biology (100% of all drug targets), to identifying a given target as likely druggable (100% of all targets), to structure-guided drug discovery (>80% of all new small-molecule drugs, made up of 50% confirmed and >30% probable cases). In addition to aggregate impact assessments, illustrative case studies are presented for six first-in-class small-molecule anti-cancer drugs, including a selective inhibitor of nuclear export targeting Exportin 1 (selinexor, Xpovio), an ATP-competitive CSF-1R receptor tyrosine kinase inhibitor (pexidartinib,Turalia), a non-ATP-competitive inhibitor of the BCR-Abl fusion protein targeting the myristoyl binding pocket within the kinase catalytic domain of Abl (asciminib, Scemblix), a covalently-acting G12C KRAS inhibitor (sotorasib, Lumakras or Lumykras), an EZH2 methyltransferase inhibitor (tazemostat, Tazverik), and an agent targeting the basic-Helix-Loop-Helix transcription factor HIF-2α (belzutifan, Welireg).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

A machine learning estimator trained on synthetic data for real-time earthquake ground-shaking predictions in Southern California

Abstract After large-magnitude earthquakes, a crucial task for impact assessment is to rapidly and accurately estimate the ground shaking in the affected region. To satisfy real-time constraints, intensity measures are traditionally evaluated with empirical Ground Motion Models that can drastically limit the accuracy of the estimated values. As an alternative, here we present Machine Learning strategies trained on physics-based simulations that require similar evaluation times. We trained and validated the proposed Machine Learning-based Estimator for ground shaking maps with one of the largest existing datasets (<100M simulated seismograms) from CyberShake developed by the Southern California Earthquake Center covering the Los Angeles basin. For a well-tailored synthetic database, our predictions outperform empirical Ground Motion Models provided that the events considered are compatible with the training data. Using the proposed strategy we show significant error reductions not only for synthetic, but also for five real historical earthquakes, relative to empirical Ground Motion Models.

Environmental Sciences & Ecology↗
DOE OSTI2022

Urban working groups in the IAEA’s model testing programmes: overview from the MODARIA I and MODARIA II programmes

The IAEA’s model testing programmes have included a series of Working Groups concerned with modelling radioactive contamination in urban environments. These have included the Urban Working Group of Validation of Environmental Model Predictions (1988–1994), the Urban Remediation Working Group of Environmental Modelling for Radiation Safety (EMRAS) (2003–2007), the Urban Areas Working Group of EMRAS II (2009–2011), the Urban Environments Working Group of (Modelling and Data for Radiological Impact Assessments) MODARIA I (2013–2015), and most recently, the Urban Exposures Working Group of MODARIA II (2016–2019). The overarching objective of these Working Groups has been to test and improve the capabilities of computer models used to assess radioactive contamination in urban environments, including dispersion and deposition processes, short-term and long-term redistribution of contaminants following deposition events, and the effectiveness of various countermeasures and other protective actions, including remedial actions, in reducing contamination levels, human exposures, and doses to humans. This paper describes the exercises conducted during the MODARIA I and MODARIA II programmes. These exercises have included short-range and mid-range atmospheric dispersion exercises based on data from field tests or tracer studies, hypothetical urban dispersion exercises, and an exercise based on data collected after the Fukushima Daiichi accident. We report improvement of model capabilities will lead to improvements in assessing various contamination scenarios (real or hypothetical), and in turn, to improved decision-making and communication with the public following a nuclear or radiological emergency.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2023

Historical evaluation and future projections of compound heatwave and drought extremes over the conterminous United States in CMIP6 *

Abstract Independently, both droughts and heatwaves can induce severe impacts on human and natural systems. However, when these two climate extremes occur concurrently in a given region, their compound impacts are often more pronounced. With the improvement in both the spatiotemporal resolution and representation of complex climate processes in the global climate models (GCMs), they are increasingly used to study future changes in these extremes and associated regional impacts. However, GCM selection for such impact assessments is generally based on historical performance and/or future mean changes, without considering individual or compound extremes. In contrast, this study evaluates historical performance and projected changes in heatwaves, droughts, and compound heatwave-droughts using an ensemble of GCMs from the latest Phase 6 of Coupled Models Intercomparison Project at a regional scale across the conterminous United States. Additionally, we explore the inter-model differences in the projected changes that are associated with various characteristics of extremes and the choice of drought indices. Our analysis reveals considerable variation among the GCMs, as well as substantial differences in the projected changes based on the choice of drought indices and region of interest. For example, the projected increases in both the frequency and intensity of drought and associated compound extreme days, based on the standardized precipitation evapotranspiration index far exceed those derived from the standard precipitation index. Further, the largest changes in the frequency of compound extremes are projected over the Southwest, South Central, and parts of the Southeast while the smallest changes are projected over the Northeast. Overall, this study provides important insights for the interpretation and selection of GCMs for future assessment studies that are crucial for the development of regional adaptation strategies in the face of climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Hosting downscaled decision-relevant community data products in ESGF2-US

As regionally-relevant high-resolution Earth system data is increasingly relied upon across scientific, policy, and practitioner communities, there is an urgent need for coordinated and federated infrastructure to store, manage, standardize, and distribute decision-relevant community data products. Substantial effort is required to ensure that these products, which are often critical for regional impact assessments and decision-making, are findable, accessible, interoperable, and reusable. The Earth System Grid Federation US project (ESGF2-US) is addressing this challenge by expanding its open-source, distributed platform to support the hosting and dissemination of downscaled Earth system datasets. This expansion includes aligning new downscaled datasets with developing community standards for metadata and file structure, consistent with existing ESGF archives. This includes ensuring CF-compliance, applying CMORization where appropriate, and developing tools to streamline user access. In this paper, we highlight the technical and coordination work required to bring downscaled data into ESGF2-US and aim to inform the broader Earth system data user community about the growing availability and utility of these curated resources.

ESGF↗