Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Illuminator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Stabilizing Iodine in 2D Mixed Halide Perovskites: Dion–Jacobson Versus Ruddlesden–Popper Phases

Iodine electrochemistry plays an important role in driving iodide‐oxidation induced halide migration in 3D halide perovskites. When subjected to light illumination or electrochemical bias, mixed halide perovskites undergo halide segregation followed by iodine expulsion from the crystal lattices. To mitigate such intrinsic halide ion mobility in 3D perovskites, lower‐dimensional (2D) perovskites are employed as barriers to stabilize the perovskite layers. Interestingly, 2D halide perovskites also exhibit halide ion mobility that is dependent on the binding configuration, viz., Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) phases. Hybrid RP‐DJ perovskites with a mixed Br:I ratio of 50:50 show increased stability following continuous photoirradiation. Spectroscopic studies that probe iodine migration and expulsion in photoirradiated 2D films of different configurations are presented here. The effective strategy of blending two different 2D phases (RP‐DJ) offers new opportunities to develop stable 2D/3D perovskite interfaces in solar cells.

2D halide perovskites↗
DOE OSTI2022

Solution‐Processed CsPbBr 3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High‐Performance Photodetectors

Abstract Planar heterojunctions (PHJs) are fundamental building blocks for construction of semiconductor devices. However, fabricating PHJs with solution‐processable semiconductors such as organic semiconductors (OSCs) is a challenge. Herein, utilizing the orthogonal solubility and good wettability between CsPbBr 3 perovskite quantum dots (PQDs) and OSCs, fabrication of solution‐processed PQD/OSC PHJs are reported. The phototransistors based on bilayer PQD/PDVT‐10 PHJs show responsivity up to 1.64 × 10 4 A W −1 , specific detectivity of 3.17 × 10 12 Jones, and photosensitivity of 5.33 × 10 6 when illuminated by 450 nm light. Such high photodetection performance is attributed to efficient charge dissociation and transport, as well as the photogating effect in the PHJs. Furthermore, the tri‐layer PDVT‐10/PQD/Y6 PHJs are used to construct photodiodes working in self‐powered mode, which exhibit broad range photoresponse from ultraviolet to near‐infrared, with responsivity approaching 10 −1 A W −1 and detectivity over 10 6 Jones. These results present a convenient and scalable production processes for solution‐processed PHJs and show their great potential for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High‐Performance and Stable Semi‐Transparent Perovskite Solar Cells through Composition Engineering

Abstract Semi‐transparent perovskite solar cells (ST‐PeSCs) have tremendous potential as solar windows owing to their higher efficiency and visible transmittance. However, studies toward this application are still nascent, particularly in unraveling the interplay between how the perovskite composition impacts the achievable device performance and stability. Here, the role of A‐ and X‐site modification in APbX 3 perovskites is studied to understand their influence on these factors. Through detailed experimental and simulation work, it is found that a perovskite composition consisting of cesium (Cs) and formamidinium (FA) at the A‐site delivers the best device performance over a range of band gaps, which are tuned by changes to the X‐site anion. Using this optimized perovskite composition, power conversion efficiencies of 15.5% and 4.1% are achieved for ST‐PeSCs with average visible transmittance values between 20.7% and 52.4%, respectively. Furthermore, the CsFA‐based ST‐PeSCs show excellent long‐term stability under continuous illumination and heating. The stability of the precursor solutions across each of the studied compositions has also been considered, showing dramatic differences in the structural properties of the perovskites and their device performance for all mixed A‐site compositions possessing the archetypal methyl ammonium species, while also confirming the superior stability of the CsFA precursor solutions.

14 SOLAR ENERGY↗
DOE OSTI2023

Birefringent Glass‐Engraved Tilted Pillar Metasurfaces for High Power Laser Applications

Abstract Birefringent materials—which are highly needed in high power laser systems—may be limited in usage due to the laser‐induced damage threshold of traditional birefringent materials. This work reports here on all‐glass metasurfaces, fabricated by angled etching through sacrificial metal nanoparticle (NP) etching masks, for generation of effective birefringence in the formed layer. As a result, a fused silica metasurface, monolithic to the underlying substrate, is demonstrated to exhibit a birefringence of 6.57° under 375 nm illumination. Full‐wave analysis shows a good agreement with the measurement and presents potential paths forward to increasing the effective metasurface birefringence. This is the first demonstration, to the best of knowledge, of an etching technique to obtain the resulting tilted pillar‐like nanofeatures. The anisotropy of the metasurface nanoelements along the two window in‐plane major axes presents different effective paths for the two polarizations and thus generates birefringence in a nonbirefringent material. Additionally, the imparted anisotropy lends itself to manipulation of physical properties of the surface as well, with metasurface feature orientation suppressing water flow along one principal axis and giving rise to water flow steering capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thiol‐Functionalized Conjugated Metal–Organic Frameworks for Stable and Efficient Perovskite Photovoltaics

Abstract Metal–organic frameworks (MOFs) have been investigated recently in perovskite photovoltaics owing to their potential to boost optoelectronic performance and device stability. However, the impact of variations in the MOF side chain on perovskite characteristics and the mechanism of MOF/perovskite film formation remains unclear. In this study, three nanoscale thiol‐functionalized UiO‐66‐type Zr‐based MOFs (UiO‐66‐(SH) 2 , UiO‐66‐MSA, and UiO‐66‐DMSA) are systematically employed and examined in perovskite solar cells (PSCs). Among these MOFs, UiO‐66‐(SH) 2 , with its rigid organic ligands, exhibited a strong interaction with perovskite materials with more efficient suppression of perovskite vacancy defects. More importantly, A detailed and in‐depth discussion is provided on the formation mechanism of UiO‐66‐(SH) 2 ‐assisted perovskite film upon in situ GIWAXS performed during the annealing process. The incorporation of UiO‐66‐(SH) 2 additives substantially facilitates the conversion of PbI 2 into the perovskite phase, prolongs the duration of stage I, and induces a delayed phase transformation pathway. Consequently, the UiO‐66‐(SH) 2 ‐assisted device demonstrates reduced defect density and superior optoelectronic properties with optimized power conversion efficiency of 24.09% and enhanced long‐term stability under ambient environment and continuous light illumination conditions. This study acts as a helpful design guide for desired MOF/perovskite structures, enabling further advancements in MOF/perovskite optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Towards Long‐Term Stable Perovskite Solar Cells: Degradation Mechanisms and Stabilization Techniques

It is certain that perovskite materials must be a game‐changer in the solar industry as long as their stability reaches a level comparable with the lifetime of a commercialized Si photovoltaic. However, the operational stability of perovskite solar cells and modules still remains unresolved, especially when devices operate in practical energy‐harvesting modes represented by maximum power point tracking under 1 sun illumination at ambient conditions. This review article covers from fundamental aspects of perovskite instability including chemical decomposition pathways under light soaking and electrical bias, to recent advances and techniques that effectively prevent such degradation of perovskite solar cells and modules. In particular, fundamental causes for permanent degradation due to ion migration and trapped charges are overviewed and explain their interplay between ions and charges. Based on the degradation mechanism, recent advances on the strategies are discussed to slow down the degradation during operation for a practical use of perovskite‐based solar devices.

14 SOLAR ENERGY↗
DOE OSTI2025

Observation of Extraordinary Vibration Scatterings Induced by Strong Anharmonicity in Lead‐Free Halide Double Perovskites

Abstract Lead‐free halide double perovskites provide a promising solution for the long‐standing issues of lead‐containing halide perovskites, i.e., the toxicity of Pb and the low stability under ambient conditions and high‐intensity illumination. Their light‐to‐electricity or thermal‐to‐electricity conversion is strongly determined by the dynamics of the corresponding lattice vibrations. Here, the measurement of lattice dynamics is presented in a prototypical lead‐free halide double perovskite(Cs 2 NaInCl 6 ). The quantitative measurements and first‐principles calculations show that the scatterings among lattice vibrations at room temperature are at the timescale of ≈1 ps, which stems from the extraordinarily strong anharmonicity in Cs 2 NaInCl 6 . Further the degree of anharmonicity of each type of atom is quantitatively characterized in the Cs 2 NaInCl 6 single crystal, which stems from the interatomic forces, and demonstrate that this strong anharmonicity is synergistically contributed by the bond hierarchy, the tilting of the NaCl 6 and InCl 6 octahedral units, and the rattling of Cs + ions. Consequently, the crystalline Cs 2 NaInCl 6 possesses an ultralow thermal conductivity of ≈0.43 W mK −1 at room temperature, and a weak temperature dependence ofT −0.41 . These findings uncovered the underlying mechanisms behind the dynamics of lattice vibrations in double perovskites, which can largely benefit the design of optoelectronics and thermoelectrics based on halide double perovskites.

Chemistry↗
DOE OSTI2020

Perovskite Electronic Ratchets for Energy Harvesting

Electronic ratchets are energy-harvesting devices that can utilize spatially asymmetric potential distributions to convert nondirectional/random sources of energy into direct current. The potential asymmetry can be generated in a number of ways, but one purported mechanism is to redistribute ions directly within the active material. Utilizing the known propensity for ion migration in lead-halide perovskites (LHP), the first LHP flashing electronic ratchet is demonstrated by using a voltage stress to intentionally redistribute halide ions within a prototypical 2D perovskite. The resulting asymmetric potential distribution across the 2D perovskite allows for conversion of both electronic noise and unbiased square-wave potentials into current. Furthermore, simultaneous application of light illumination and voltage stress enhances the asymmetric potential distribution, enabling higher current than the nonilluminated device. This work presents an electronic ratchet system that exploits facile ion migration, which can be modified by both electrical and optical stimuli, providing a model system with the potential to test outstanding mechanistic questions for electronic ratchets.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High Mobility, High Carrier Density SnSe 2 Field‐Effect Transistors with Ultralow Subthreshold Swing and Gate‐Controlled Photoconductance Switching

2D and layered semiconductors are considered as promising electronic materials, particularly for applications that require high carrier mobility and efficient field-effect switching combined with mechanical flexibility. To date, however, the highest mobility has been realized primarily at low carrier concentration. Here, it is shown that few-layer/multilayer SnSe 2 gated by a solution top gate combines very high room-temperature electron mobility (up to 800 cm 2 V −1 s −1 ), along with large on-off current ratios (>10 5 ) and a subthreshold swing below the thermodynamic limit (50 mV per decade) in field-effect devices, at exceptionally large sheet carrier concentrations of ≈10 13 cm −2 . Observed mobility enhancements upon partial depletion of the channel point to near-surface defects or impurities as the mobility-limiting scattering centers. Under illumination, the resulting gap states give rise to gate-controlled switching between positive and negative photoconductance. The results qualify SnSe 2 as a promising layered semiconductor for flexible and wearable electronics, as well as for the realization of advanced approaches to photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultraviolet Photoemission Spectroscopy and Kelvin Probe Measurements on Metal Halide Perovskites: Advantages and Pitfalls

In this essay, a case study is presented on the electronic structure of several metal halide perovskites (MHP) using Kelvin probe (KP)-based surface photovoltage (SPV) measurements and ultraviolet photoemission spectroscopy (UPS) to demonstrate the advantages, but also the pitfalls, of using these techniques to characterize the surfaces of these materials. The first part addresses the loss of halide species from perovskite surfaces upon supragap illumination in vacuum. This has the potential to cause both a long-term alteration of the sample work function and a modification of the KP tip during SPV measurements. If undetected, this leads to a misinterpretation of the MHP surface potential. The second part illustrates the difficulties in determining the valence band maximum (VBM) of MHP surfaces with UPS and stresses the importance of taking into account the low density of states at the VBM edge. Given this circumstance, specific care must be taken to eliminate measurement artifacts in order to ascertain the presence or absence of low densities of electronic gap states above the VBM. This essay also highlights issues such as film degradation, nonequilibrium situations (e.g., SPV), and satellite emissions, which occur during photoemission spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding the Role of Order in Y‐Series Non‐Fullerene Solar Cells to Realize High Open‐Circuit Voltages

Abstract Non‐fullerene acceptors (NFAs) as used in state‐of‐the‐art organic solar cells feature highly crystalline layers that go along with low energetic disorder. Here, the crucial role of energetic disorder in blends of the donor polymer PM6 with two Y‐series NFAs, Y6, and N4 is studied. By performing temperature‐dependent charge transport and recombination studies, a consistent picture of the shape of the density of state distributions for free charges in the two blends is developed, allowing an analytical description of the dependence of the open‐circuit voltage V OC on temperature and illumination intensity. Disorder is found to influence the value of the V OC at room temperature, but also its progression with temperature. Here, the PM6:Y6 blend benefits substantially from its narrower state distributions. The analysis also shows that the energy of the equilibrated free charge population is well below the energy of the NFA singlet excitons for both blends and possibly below the energy of the populated charge transfer manifold, indicating a down‐hill driving force for free charge formation. It is concluded that energetic disorder of charge‐separated states has to be considered in the analysis of the photovoltaic properties, even for the more ordered PM6:Y6 blend.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhancing Photostability of Sn-Pb Perovskite Solar Cells by an Alkylammonium Pseudo-Halogen Additive

High-performance tin-lead perovskite solar cells (PSCs) are needed for all-perovskite-tandem solar cells. However, iodide related fast photodegradation severely limits the operational stability of Sn-Pb perovskites despite the demonstrated high efficiency and thermal stability. Herein, this work employs an alkylammonium pseudo-halogen additive to enhance the power conversion efficiency (PCE) and photostability of methylammonium (MA)-free, Sn-Pb PSCs. Density functional theory (DFT) calculations reveal that the pseudo-halogen tetrafluoroborate (BF 4 - ) has strong binding capacity with metal ions (Sn 2+ /Pb 2+ ) in the Sn-Pb perovskite lattice, which lowers iodine vacancy formation. Upon combining BF 4 - with an octylammonium (OA + ) cation, the PCE of the device with a built-in light-scattering layer is boosted to 23.7%, which represents a new record for Sn-Pb PSCs. The improved efficiency benefits from the suppressed defect density. Under continuous 1 sun illumination, the OABF 4 embodied PSCs show slower generation of interstitial iodides and iodine, which greatly improves the device photostability under open-circuit condition. Moreover, the device based on OABF 4 retains 88% of the initial PCE for 1000 h under the maximum-power-point tracking (MPPT) without cooling.

14 SOLAR ENERGY↗
DOE OSTI2023

Photochemical Decomposition of Y‐Series Non‐Fullerene Acceptors Is Responsible for Degradation of High‐Efficiency Organic Solar Cells

Abstract Organic photovoltaic cells that employ Y‐series non‐fullerene acceptors (NFAs) have recently achieved impressive power‐conversion efficiencies (>18%). To fulfill their commercial promise, it is important to quantify their operational lifetimes and understand their degradation mechanisms. In this work, the spectral‐dependent photostability of films and solar cells comprising several Y‐series acceptors and the donor polymer PM6 is investigated systematically. By applying longpass filters during aging, it is shown that UV/near‐UV photons are responsible for the photochemical decomposition of Y‐series acceptors; this degradation is the primary driver of early solar cell performance losses. Using mass spectrometry, the vinylene linkage between the core and electron‐accepting moieties of Y‐series acceptors is identified as the weak point susceptible to cleavage under UV‐illumination. Employing a series of device characterization, along with numerical simulations, the efficiency losses in organic photovoltaic cells are attributed to the formation of traps, which reduces charge extraction efficiency and facilitates non‐radiative recombination as the Y‐series acceptors degrade. This study provides new insights for molecular degradation of organic photovoltaic absorber materials and highlights the importance of future molecular design and strategies for improved solar cell stability.

14 SOLAR ENERGY↗
DOE OSTI2023

Self‐Assembly of 0D/3D Perovskite Bi‐Layer from a Micro‐Emulsion Ink

Abstract 2D/3D bilayer perovskite synthesized using sequential deposition methods has shown effectiveness in enhancing the stability of perovskite solar devices. However, these approaches present several limitations such as uncontrolled chemical processes, disordered interfacial states, and microscale heterogeneities that can chemically, structurally, and electronically compromise the performance of solar modules. Here, this work demonstrates an emulsion‐based self‐assembly approach using natural lipid biomolecules in a nonionic solution system to form a 0D/3D bilayer structure. The new capping layer is composed of 0D‐entity nanoparticles of perovskite encapsulated by a hydrophobic lipid membrane, analogous to a cell structure, formed through a molecular self‐assembly process. This 0D layer provides a strong water repellent characteristics, optimum interface microstructure, and excellent homogeneity that drives significant enhancement in stability. Solar modules with a large active area of 70 cm 2 fabricated using films comprising of 0D/3D bilayer structure are found to show consistent efficiency of >19% for 2800 h of continuous illumination in the air (60% relative humidity). This emulsion‐based self‐assembly approach is expected to have a transformative impact on the design and development of stable perovskite‐based devices.

0D/3D bilayers↗
DOE OSTI2023

Regiospecific Incorporation of Acetylene Linker in High‐Electron Mobility Dimerized Acceptors for Organic Solar Cells with High Efficiency (18.8%) and Long 1‐Sun Lifetime (> 5000 h)

Abstract The commercialization of organic solar cells (OSCs) requires both high power conversion efficiency (PCE) and long‐term stability. However, the lifetime of the OSCs containing small‐molecule acceptors (SMA) should be significantly enhanced. In this study, a series of planarity‐controlled is developed, high electron mobility dimerized SMAs (DSMAs) and realize OSCs with high‐performance (PCE = 18.8%) and high‐stability ( t 80% lifetime = 5380 h under 1‐Sun illumination). An acetylene linker with a planar triple bond is designed for dimerization of SMA units to afford the high backbone planarity necessary to achieve high crystallinity and electron mobility. To further engineer the molecular conformation and electron mobility of the DSMAs, different regioisomers of a Y‐based SMA are dimerized to yield three regioisomerically distinct DSMAs, denoted as DYA‐I, DYA‐IO, and DYA‐O, respectively. It is found that the crystallinity, electron mobility, and glass transition temperature of the DSMAs gradually increase in the order of DYA‐O, DYA‐IO, and DYA‐I, which, in turn, enhance the PCE and device stability of the resulting OSCs; DYA‐O (PCE = 16.45% and t 80% lifetime = 3337 h) < DYA‐IO (PCE = 17.54% and t 80% lifetime = 4255 h) < DYA‐I (PCE = 18.83% and t 80% lifetime = 5380 h).

Chemistry↗
DOE OSTI2023

Synergetic Effect of Aluminum Oxide and Organic Halide Salts on Two‐Dimensional Perovskite Layer Formation and Stability Enhancement of Perovskite Solar Cells

Long-chain organic halide salts are widely used in perovskite-based optoelectronic devices for surface passivation owing to their capability to interact with the surface defects of perovskites. Here, aluminum oxide (AlO x ) is introduced via atomic layer deposition onto octylammonium iodide (OAI) to exploit the benefits of organic halide salts without generating undesired defects. The devices incorporating AlO x on OAI-treated perovskite (OAI/AlO x ) show enhancement in both device performance and photo-stability compared to those with only treatment. A diffusion of aluminum from AlO x into the perovskite through surface characterization contributes to a uniform photo-generated carrier transport in both the surface and the bulk of the perovskite absorber. In addition, it is revealed that light-induced two-dimensional perovskite formation on OAI/AlO x . This may be ascribed to preventing the loss of OA cations due to the presence of AlO x , leading to a decrease in the number of iodine anions which suppresses the light-induced degradation of corresponding devices. Consequently, the devices show over 24% efficiency and retain their efficiency over 1000 hours under continuous light illumination.

14 SOLAR ENERGY↗