Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Status and prognosis for alternative engine materials

The current state of research and development of new materials for advanced aircraft engines is reviewed. The advantages and disadvantages of intermetallic compounds and refractory metals as replacements for today's nickel-base alloys are discussed along with some results of research directed at overcoming some of the problems which restrict their application. It is concluded that continuous fiber reinforced intermetallic matrix composites offer one of the best chances for success. However, major technical barriers still exist, especially in the development of suitable fibers. The introduction of these materials into aircraft engines is expected to take in excess of 5 to 10 years.

Stephens, Joseph R.↗

Multi-scale modeling of wastage layer formation in metallic fuel cladding

Fuel-cladding chemical interaction (FCCI) is a major concern for U-Zr metallic fuels' performance, primarily due to the formation of a brittle layer (wastage) in the cladding. This brittle layer, resulting from intermetallic compounds between cladding constituents Fe, Cr, and lanthanide fission products, significantly impacts the cladding's mechanical integrity. Recent efforts focus on developing a mechanistic modeling framework to understand lanthanide production, transport to the fuel-cladding interface, and phase transformation to intermetallic phases. A multi-scale computational approach has been used to calculate lanthanide transport rates, with atomistic calculations determining Nd diffusivities through the solid fuel matrix and along pore surfaces. These diffusivities inform a mesoscale model to determine an effective diffusion coefficient, accounting for porosity and infiltration with bond sodium. This effective diffusivity is used in engineering-scale simulations via the BISON fuel performance code, which has been validated against EBR-II and FFTF reactor experiments.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of excess Mg to control corrosion in molten MgCl 2 and KCl eutectic salt mixture

Structural alloys may experience corrosion when exposed to molten chloride salts due to selective dissolution of active alloying elements. One way to prevent this is to make the molten salt reducing. For the KCl + MgCl 2 eutectic salt mixture, pure Mg can be added to achieve this. However, Mg can form intermetallic compounds with nickel at high temperatures, which may cause alloy embrittlement. This work shows that an optimum level of excess Mg could be added to the molten salt which will prevent corrosion of alloys like 316 H, while not forming any detectable Ni-Mg intermetallic phases on Ni-rich alloy surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experiments with the low melting indium-bismuth alloy system

The following is a laboratory experiment designed to create an interest in and to further understanding of materials science. The primary audience for this material is the junior high school or middle school science student having no previous familiarity with the material, other than some knowledge of temperature and the concepts of atoms, elements, compounds, and chemical reactions. The objective of the experiment is to investigate the indium-bismuth alloy system. Near the eutectic composition, the liquidus is well below the boiling point of water, allowing simple, minimal hazard casting experiments. Such phenomena as metal oxidation, formation of intermetallic compound crystals, and an unusual volume increase during solidification could all be directly observed. A key concept for students to absorb is that properties of an alloy (melting point, mechanical behavior) may not correlate with simple interpolation of properties of the pure components. Discussion of other low melting metals and alloys leads to consideration of environmental and toxicity issues, as well as providing some historical context. Wetting behavior can also be explored.

Krepski, Richard P.↗

Recent Advances of Structurally Ordered Intermetallic Nanoparticles for Electrocatalysis

Structurally ordered intermetallic phases have exhibited higher and higher electrocatalytic activity and stability than disordered alloys in reactions such as the oxygen reduction reaction (ORR) and the catalytic oxidation of fuels (hydrogen, formic acid, or ethanol). The enhanced electrocatalytic activity could be derived from the definite composition and predictable control over structural, geometric, and electronic effects. This review, based on the understanding of the catalytic mechanism of structurally ordered intermetallic nanoparticles, provides a comprehensive acknowledgement of how the particle size and morphology affect the catalytic performance. The strategy for reducing particle size and the impact of particle size on electrocatalysis will be firstly introduced. Then, recent developments in the synthesis and design of morphology-controlled catalysts are summarized. The structure-activity relationship between the catalytic activity and morphology including core-shell/hollow and porosity will be highlighted. Finally, the current challenges and future developments are provided. On the basis of this review, intermetallic compound shed light on the future development of electrocatalysts for fuel cells and metal-air batteries.

36 MATERIALS SCIENCE↗

Machine learning accelerated prediction of Ce-based ternary compounds involving antagonistic pairs

The discovery of novel quantum materials within ternary phase spaces containing antagonistic pairs such as Fe with Bi, Pb, In, and Ag, presents significant challenges yet holds great potential. In this work, we investigate the stabilization of these immiscible pairs through the integration of Cerium (Ce), an abundant rare-earth and cost-effective element. By employing a machine learning (ML)-guided framework, particularly crystal graph convolutional neural networks (CGCNN), combined with first-principles calculations, we efficiently explore the composition/structure space and predict 9 stable and 37 metastable Ce-Fe-X (X=Bi, Pb, In, and Ag) ternary compounds. Our findings include the identification of multiple new stable and metastable phases, which are evaluated for their structural and energetic properties. These discoveries not only contribute to the advancement of quantum materials but also offer viable alternatives to critical rare earth elements, underscoring the importance of Ce-based intermetallic compounds in technological applications.

36 MATERIALS SCIENCE↗

Neutron absorbers and methods of forming at least a portion of a neutron absorber

Methods of forming at least a portion of a neutron absorber include combining a first material and a second material to form a compound, reducing the compound into a plurality of particles, mixing the plurality of particles with a third material, and pressing the mixture of the plurality of particles and the third material. One or more components of neutron absorbers may be formed by such methods. Neutron absorbers may include a composite material including an intermetallic compound comprising hafnium aluminide and a matrix material comprising pure aluminum.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Gold-rich R 3 Au 7 Sn 3 : Establishing the interdependence between electronic features and physical properties

Two new polar intermetallic compounds Y 3 Au 7 Sn 3 (I) and Gd 3 Au 7 Sn 3 (II) have been synthesized and their structures have been determined by single crystal X-ray diffraction (P6 3/m ; Z = 2, a = 8.148(1)/8.185(3), and c = 9.394(2)/9.415(3) for I/II, respectively). They can formally be assigned to the Cu 10 Sn 3 type and consist of parallel slabs of Sn centered, edge-sharing trigonal Au 6 antiprisms connected through R 3 (R = Y, Gd) triangles. Additional Au atoms reside in the centres of trigonal Au 6 prisms forming Au@Au 6 clusters with Au–Au distances of 2.906–2.960 Å, while the R–R contacts in the R 3 groups are considerably larger than the sums of their metallic radii. These exclusive structural arrangements provide alluring systems to study the synergism between strongly correlated systems, particularly, those in the structure of (II), and extensive polar intermetallic contacts, which has been inspected by measurements of the magnetic properties, heat capacities and electrical conductivities of both compounds. Gd 3 Au 7 Sn 3 shows an antiferromagnetic ordering at 13 K, while Y 3 Au 7 Sn 3 is a Pauli paramagnet and a downward curvature in its electrical resistivity at about 1.9 K points to a superconducting transition. DFT-based band structure calculations on R 3 Au 7 Sn 3 (R = Y, Gd) account for the results of the conductivity measurements and different spin ordering models of (II) provide conclusive hints about its magnetic structure. As a result, chemical bonding analyses of both compounds indicate that the vast majority of bonding originates from the heteroatomic Au–Gd and Au–Sn interactions, while homoatomic Au–Au bonding is evident within the Au@Au 6 clusters.

36 MATERIALS SCIENCE↗

Magnetism of new metastable cobalt-nitride compounds

The search for new magnetic materials with high magnetization and magnetocrystalline anisotropy is important for a wide range of applications including information and energy processing. There is only a limited number of naturally occurring magnetic compounds that are suitable. This situation stimulates an exploration of new phases that occur far from thermal-equilibrium conditions, but their stabilization is generally inhibited due to high positive formation energies. Here a nanocluster-deposition method has enabled the discovery of a set of new non-equilibrium Co–N intermetallic compounds. The experimental search was assisted by computational methods including adaptive-genetic-algorithm and electronic-structure calculations. Conventional wisdom is that the interstitial or substitutional solubility of N in Co is much lower than that in Fe and that N in Co in equilibrium alloys does not produce materials with significant magnetization and anisotropy. By contrast, our experiments identify new Co–N compounds with favorable magnetic properties including hexagonal Co 3 N nanoparticles with a high saturation magnetic polarization ($J_s$ = 1.28 T or 12.8 kG) and an appreciable uniaxial magnetocrystalline anisotropy ($K_1$ = 1.01 MJ m -3 or 10.1 Mergs per cm 3 ). This research provides a pathway for uncovering new magnetic compounds with computational efficiency beyond the existing materials database, which is significant for future technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effective Lanthanide Diffusivity through U-Zr Metallic Fuel

Fuel-cladding chemical interaction (FCCI) is one of the main concerns for the performance of U-Zr metallic fuels. Although FCCI results in complex phase transformations and morphological changes in both the fuel and cladding sides of the interface, the formation of a brittle layer in the cladding side of the interface (sometimes referred to as wastage) has one of the most significant impacts on the cladding mechanical integrity. This brittle layer is associated with the formation of intermetallic compounds between the cladding constituents Fe, Cr and the lanthanide fission product species. The formation of this cladding wastage layer has been the focus of recent efforts to develop a mechanistic modeling framework, including production of lanthanides in the fuel, transport through the fuel to the fuel-cladding interface, and phase transformation to form intermetallic phases. To calculate the rate of transport of lanthanides through the fuel, a multi-scale computational approach has been used. Atomistic calculations have been performed to determine the diffusivities of Nd, the most prevalent lanthanide species, through the solid fuel matrix and along pore surfaces. These diffusivities have been used as input parameters for a mesoscale model to determine an effective diffusion coefficient that accounts for the formation of porosity, its interconnection, and infiltration with bond sodium from the fuel-cladding gap. The effective diffusivity has been used in engineering-scale simulations using the BISON fuel performance code, and BISON simulations have been compared to representative validation cases from the EBR-II reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Gold in the layered structures of R 3 Au 7 Sn 3 : From relativity to versatility

A new isotypic series of ternary rare earth element-gold-tetrel intermetallic compounds has been synthesized and their structures and properties have been characterized. R 3 Au 7 Sn 3 (R = Y, La-Nd, Sm, Gd-Tm, Lu) crystallize with the hexagonal Gd 3 Au 7 Sn 3 prototype (Pearson symbol hP26; P6 3/m , a = 8.110-8.372 Å, c = 9.351-9.609 Å, V cell = 532.7-583.3 Å3, Z = 2), an ordered variant of the Cu 10 Sn 3 -type. Their structure is built up by GdPt 2 Sn-type layers, which feature edge-sharing Sn@Au 6 trigonal antiprisms connected by trigonal R3 groups. Additional insertion of gold atoms leads to the formation of new homoatomic Au clusters, Au@Au 6 ; alternatively, the structure can be considered as a superstructural polyhedral packing of the ZrBeSi-type. The magnetization, heat ca-pacity and electrical resistivity have been measured for R 3 Au 7 Sn 3 (R = Ce, Pr, Nd and Tb). All four compounds order antiferromagnetically with the highest T N of 13 K for Tb 3 Au 7 Sn 3 . In Ce 3 Au 7 Sn 3 , which has a T N of 2.9 K, the heat capacity and electrical resistivity data in zero and applied fields indicate the presence of Kondo interactions. The coefficient of the linear term in the electronic heat capacity, γ, derived from the heat capacity data below 0.5 K is 211 mJ/Ce mol K 2 suggesting strong electronic correlations due to the Kondo interaction. The electronic structure calculations based on the projector augmented wave method for particular representatives of the series suggest different tendencies of the localized R-4f AOs to hybridize with the valence states. LMTO-based bonding analysis on the non-magnetic La 3 Au 7 Sn 3 indicates that the integrated crystal orbital Hamilton popu-lations (COHPs) are dominated by the heteroatomic Au–Sn contacts; however, contributions from La–Au and La–Sn separations are significant, both together exceeding 40 % in the overall bonding. Furthermore, homoatomic Au–Au interactions are evident for the Au@Au 6 units but, despite of the high atomic concentration of Au in the compound, they do not dominate the entire bonding picture.

36 MATERIALS SCIENCE↗

Two-dimensional transition metal carbides as supports for tuning the chemistry of catalytic nanoparticles

Supported nanoparticles are broadly employed in industrial catalytic processes, where the active sites can be tuned by metal-support interactions (MSIs). Although it is well accepted that supports can modify the chemistry of metal nanoparticles, systematic utilization of MSIs for achieving desired catalytic performance is still challenging. The developments of supports with appropriate chemical properties and identification of the resulting active sites are the main barriers. Here, we develop two-dimensional transition metal carbides (MXenes) supported platinum as efficient catalysts for light alkane dehydrogenations. Ordered Pt 3 Ti and surface Pt 3 Nb intermetallic compound nanoparticles are formed via reactive metal-support interactions on Pt/Ti 3 C 2 T x and Pt/Nb 2 CT x catalysts, respectively. MXene supports modulate the nature of the active sites, making them highly selective toward C–H activation. Such exploitation of the MSIs makes MXenes promising platforms with versatile chemical reactivity and tunability for facile design of supported intermetallic nanoparticles over a wide range of compositions and structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of U-10Zr-2Sn-2Sb and U-10Zr-2Sn-2Sb-4Ln to assess Sn+Sb as a mixed additive system to bind lanthanides

In this paper, tin and antimony are being investigated as potential additives to metallic fuel to control fuel-cladding chemical interaction (FCCI). A primary cause of FCCI is lanthanide fission products moving to the fuel periphery and interacting with the cladding. This interaction can lead to wastage of the cladding and, given enough time or burn-up, eventually to a cladding breach. The current study involves a microstructural characterization of as-cast and annealed U-10Zr-2Sn-2Sb and U-10Zr-2Sn-2Sb-4Ln, where Ln = 53Nd-25Ce-16Pr-6La, all in wt %, as alloys which could prevent FCCI. Scanning electron microscopy (SEM) analysis and X-ray powder diffraction indicates the additive-Zr compound in U-10Zr-2Sn-2Sb is Zr 5 (Sn,Sb) 3 , while the additive-Ln compound being formed in U-10Zr-2Sn-2Sb-4Ln is Ln 5 (Sn,Sb) 4 , with significantly more Sb than Sn (37 at. % versus 6 at. %, respectively). The bulk of the Sn, with a small amount of Sb, remained as Zr 5 (Sn,Sb) 3 precipitates. Finally, the potential benefits of a mixed additive system, along with relative stabilities of the intermetallic compounds, are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Giant magnetic anisotropy of Pb atoms in 3 d -based magnets

Electronic structure analysis is performed to study the properties of several Pb-containing 3⁢ d intermetallics. Our study reveals that binary metastable C⁢o 3 ⁢Pb and F⁡e 3 ⁢Pb intermetallic compounds exhibit very attractive intrinsic magnetic properties. We primarily focus on the magnetic anisotropic properties arising from the high spin-orbit coupling of the Pb atom. Decomposing the total anisotropy into intra- and interatomic contributions reveals a significant deviation from single-ion anisotropy model with strong symmetric anisotropic pair interactions present. Furthermore, we consider magnetic properties of ternary Pb-based 3⁢⁢ d intermetallics, which recently have been reported as stable or metastable. Giant magnetic anisotropy is found on Pb atoms in these systems. The origin of such strong anisotropy in L⁢a 18⁢ C⁢o 28 ⁢P⁢b 3 appears from two sources: spin-orbit and interelectronic Breit couplings. Additionally, the significance of Breit interaction for magnetic anisotropy in bulk systems is reported. It is expected that Breit coupling-induced anisotropy is dominating in magnetic Pb-based magnets with lower dimensionality including thin films.

74 ATOMIC AND MOLECULAR PHYSICS↗

La 4 Co 4 X ( X = Pb , Bi , Sb ) : A demonstration of antagonistic pairs as a route to quasi-low-dimensional ternary compounds

We outline how pairs of strongly immiscible elements, referred to here as antagonistic pairs, can be used to synthesize ternary compounds with low or quasi-reduced-dimensional motifs intrinsically built into their crystal structures. By identifying third elements that are mutually compatible with a given antagonistic pair, ternary compounds can be formed in which the third element segregates the immiscible atoms into spatially separated substructures. Quasi-low-dimensional structural units, such as sheets, chains, or clusters are a natural consequence of the immiscible atoms seeking to avoid close contact in the solid state. Further, as proof of principle, we present the discovery, crystal growth, and basic physical properties of La 4 ⁢Co 4 ⁢$\mathrm{X}$ (X = Pb, Bi, Sb), a family of intermetallic compounds based on the antagonistic pairs Co-Pb and Co-Bi. La 4 ⁢Co 4 ⁢$\mathrm{X}$ adopts an orthorhombic crystal structure (space group Pbam) containing quasi-two-dimensional Co slabs and La-X polyhedra that stack in an alternating manner along the α axis. Consistent with our proposal, the La atoms separate the Co and X substructures, ensuring there are no direct contacts between the members of the immiscible (antagonistic) pair. Within the Co slabs, the atoms occupy the vertices of corner sharing tetrahedra and triangles, and this bonding motif produces narrow electronic bands near the Fermi level that favor magnetism. The Co is moment bearing in each La 4 ⁢Co 4 $\mathrm{X}$ compound studied, and we show that whereas La 4 ⁢Co 4 ⁢Pb behaves as a three-dimensional antiferromagnet with T N =220K, La 4 ⁢Co 4 ⁢Bi and La 4⁢ Co 4 ⁢Sb have behavior consistent with low-dimensional magnetic coupling and ordering, with T N =153K and 143 K, respectively. In addition to the Pb-, Bi-, and Sb-based La 4 ⁢Co 4 ⁢$\mathrm{X}$ compounds, we also were likely able to produce an analogous La 4 ⁢Co 4 ⁢Sn in polycrystalline form, although we were unable to isolate single crystals. We anticipate that identifying and using mutually compatible third elements together with an antagonistic pair represents a generalizable design principle for discovering new materials and new structure types containing low-dimensional substructures.

36 MATERIALS SCIENCE↗

A novel microstructural approach for TRIP/TWIP β-Ti alloys using intermetallic precipitation

Interest in metastable β-Ti has grown, due to the exceptional work hardening caused by TRansformation and TWinning Induced Plasticity (TRIP/TWIP). A current challenge is increasing the yield strength, while maintaining the benefits of TRIP/TWIP. This study presents the first report of TRIP/TWIP in a metastable β-Ti alloy containing intermetallic compounds, specifically Ti silicide precipitates. Silicon (Si) additions enable the formation of silicide particles, which can be precipitated, dissolved, and controlled through tailored heat treatments. In-situ synchrotron x-ray diffraction during tensile testing reveals primary {332}<113> twinning activates first, followed by TRIP, leading to extensive work hardening and uniform elongation in the solutionized state. In conclusion, these findings open a novel microstructural approach to the design of multiphase TRIP/TWIP titanium alloys, relying on intermetallic precipitation rather than allotropes such as α or ω phase, and lay the groundwork for future studies on intermetallic precipitation strengthening.

Materials science↗

Impact of Gold Thickness on Interfacial Evolution and Subsequent Embrittlement of Tin–Lead Solder Joints

Although gold remains a preferred surface finish for components used in high-reliability electronics, rapid developments in this area have left a gap in the fundamental understanding of solder joint gold (Au) embrittlement. Furthermore, as electronic designs scale down in size, the effect of Au content is not well understood on increasingly smaller solder interconnections. As a result, previous findings may have limited applicability. The current study focused on addressing these gaps by investigating the interfacial microstructure that evolves in 63Sn-37Pb solder joints as a function of Au layer thickness. Those findings were correlated to the mechanical performance of the solder joints. Increasing the initial Au concentration decreased the mechanical strength of a joint, but only to a limited degree. Kirkendall voids were the primary contributor to low-strength joints, while brittle fracture within the intermetallic compounds (IMC) layers is less of a factor. The Au embrittlement mechanism appears to be self-limiting, but only once mechanical integrity is degraded. Sufficient void evolution prevents continued diffusion from the remaining Au.

36 MATERIALS SCIENCE↗