Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Acceleration of ordering transformation of a new Fe{sub 2}(Mn,Cr)Si Heusler-alloy film by very high frequency plasma irradiation process during radio frequency sputter deposition

A new Heusler alloy, Fe{sub 2}(Mn,Cr)Si, that is likely to have high spin polarization (P) and high damping constant ({alpha}) was proposed to obtain high magneto-resistance ratio and low spin torque noise in a magnetic read head with a current-perpendicular-to-plane (CPP) giant magneto-resistance (GMR) multilayer. A very high frequency (VHF) plasma irradiation process during radio frequency (RF) sputter deposition was investigated to form the highly ordered structure of the Heusler alloy film with low thermal treatment temperature. The main results are as follows: (1) P and magnetic moment of Fe{sub 2}(Mn{sub 0.5}Cr{sub 0.5})Si with an L2{sub 1} structure were estimated at 0.99 and 2.49 {mu}{sub B}/f.u., respectively, and {alpha} was also estimated to be larger compared with the case of Co{sub 2}MnSi, according to density of states (DOS) calculations. (2) The ordering (at least B2 structure) temperature of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film decreased from 500 to 300 deg. C by using the VHF plasma irradiation process with optimized condition. (3) The surface roughness of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film also reduced from 1.7 to 0.5 nm by using the VHF plasma irradiation process. It is found that the Fe{sub 2}(Mn,Cr)Si Heusler alloy and the VHF plasma irradiation process with optimized condition seems to be applicable for fabrication of high-performance magnetic read head with CPP-GMR device.

36 MATERIALS SCIENCE↗

A High Frequency (HF) Inductive Power Transfer Circuit for High Temperature Applications Using SiC Schottky Diodes

Wireless sensors placed in high temperature environments, such as aircraft engines, are desirable to reduce the mass and complexity of routing wires. While communication with the sensors is straight forward, providing power wirelessly is still a challenge. This paper introduces an inductive wireless power transfer circuit incorporating SiC Schottky diodes and its operation from room temperature (25 C) to 500 C.

Diode↗

Modal dynamics of high-frequency transverse combustion instabilities

This paper investigates the modal dynamics of self-excited high frequency transverse instabilities in a multi-nozzle, swirl-stabilized can combustor. It utilizes results from multiple pressure sensors to decompose the disturbance into clockwise (CW) and counter-clockwise (CCW) waves, enabling a reconstruction of the pressure amplitude, phase, anti-nodal line location, and spin ratio. While these types of decompositions have been demonstrated on small scale combustors, particularly annular combustors, this is the first study to analyze these results for a high power, multi-nozzle can combustor. Its particular focus is in characterizing the system evolution in phase space and the nature of the system attractors under linearly unstable conditions; results are presented in spin ratio-phase difference space, so that limit cycle oscillations appear as fixed points. Results are shown for conditions where three different attractors dominate (standing, CW, and CCW) but are taken for very long time periods (~50,000 cycles) so that the system's interaction with these attractors can be observed. For the standing mode-dominated case, the phase portrait shows spiral trajectories converging to a single fixed point. For the spinning mode dominated cases, however, multiple fixed points and saddle points were observed, and the trajectories showed a more complicated structure. It was also shown that even though the CW mode is dominant, this mode intermittently switches to standing or CCW modes for short period. These results suggest that the strength of each attractor depends on test conditions and that random noise stochastically perturbs the system so that large regions of the phase space are explored. Lastly, one interesting observation is that the angular velocity of the anti-nodal line linearly varies with the spin ratio under standing-mode dominant conditions.

42 ENGINEERING↗

HESS J1943+213: A NON-CLASSICAL HIGH-FREQUENCY-PEAKED BL LAC OBJECT

HESS J1943+213 is an unidentified TeV source that is likely a high-frequency-peaked BL Lac (HBL) object, but that is also compatible with a pulsar wind nebula (PWN) nature. Each of these enormously different astronomical interpretations is supported by some of the observed unusual characteristics. In order to finally classify and understand this object, we took a three-pronged approach, through time-domain, high angular resolution, and multi-frequency radio studies. First, our deep time-domain observations with the Arecibo telescope failed to uncover the putative pulsar powering the proposed PWN. We conclude with ∼70% certainty that HESS J1943+213 does not host a pulsar. Second, long-baseline interferometry of the source with e-MERLIN at 1.5 and 5 GHz shows only a core, that is, a point source at ∼1–100 mas resolution. Its 2013 flux density is about one-third lower than that detected in the 2011 observations with similar resolution. This radio variability of the core strengthens the HBL object hypothesis. Third, additional evidence against the PWN scenario comes from the radio spectrum we compiled. The extended structure follows a power-law behavior with spectral index α = −0.54±0.04 while the core component displays a flat spectrum (α = −0.03±0.03). In contrast, the radio synchrotron emission of PWNe predicts a single power-law distribution. Overall, we rule out the PWN hypothesis and conclude that the source is a BL Lac object. The consistently high fraction (70%) of the flux density from the extended structure then leads us to conclude that HESS J1943+213 must be a non-classical HBL object.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced current quantization in high-frequency electron pumps in a perpendicular magnetic field

We present experimental results of high-frequency quantized charge pumping through a quantum dot formed by the electric field arising from applied voltages in a GaAs/AlGaAs system in the presence of a perpendicular magnetic field B. Clear changes are observed in the quantized current plateaus as a function of applied magnetic field. We report on the robustness in the length of the quantized plateaus and improvements in the quantization as a result of the applied B field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring high-frequency properties of permalloy films via submicron patterning.

We have measured shape-induced high frequency properties of patterned submicrometer permalloy (Py) arrays. We sputtered and patterned Py films on gold (Au) transmission lines, using chromium (Cr) as adhesion layers for Au and Py deposition. Each Py bar in the arrays is 10 mum long and 100 nm thick. The widths of the Py bars in two different arrays are 240 and 550 nm, respectively. Micromagnetic simulations indicate single domain magnetization distribution in these Py structures. The measured ferromagnetic resonance frequencies without bias field are approximately 11.5 and 8 GHz, respectively. We obtained the corresponding susceptibilities. The experimental results agree with theoretical predictions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An Investigation of High-frequency Combustion Oscillations in Liquid-propellant Rocket Engines

An experimental investigation of high-frequency combustion oscillations (screaming) was conducted with a 100-pound-thrust acid-hydrocarbon rocket engine and a 500-pound-thrust oxygen-fuel rocket engine. The oscillation frequencies could be correlated as a linear function of the parameter C/L, where C is the experimentally measured characteristic velocity and L is the combustion-chamber length. The tendency of the engines to scream increased as chamber length was increased. With engine configurations that normally had a low efficiency, screaming resulted in increased performance; at the same time, a five to tenfold increase in heat-transfer rate occurred. It was possible, however, to achieve good performance without screaming.

COMBUSTION - EFFECT OF ENGINE OPERATING CONDITIONS↗

High frequency modulation circuits based on photoconductive wide bandgap switches

Methods, systems, and devices for high voltage and/or high frequency modulation. In one aspect, an optoelectronic modulation system includes an array of two or more photoconductive switch units each including a wide bandgap photoconductive material coupled between a first electrode and a second electrode, a light source optically coupled to the WBGP material of each photoconductive switch unit via a light path, in which the light path splits into multiple light paths to optically interface with each WBGP material, such that a time delay of emitted light exists along each subsequent split light path, and in which the WBGP material conducts an electrical signal when a light signal is transmitted to the WBGP material, and an output to transmit the electrical signal conducted by each photoconductive switch unit. The time delay of the photons emitted through the light path is substantially equivalent to the time delay of the electrical signal.

36 MATERIALS SCIENCE↗

Ground Radar Polarimetric Observations of High-Frequency Earth-Space Communication Links

Strategic roadmaps for NASA's Human Exploration and Development of Space (REDS) enterprise support near-term high-frequency communication systems that provide moderate to high data rates with dependable service. Near-earth and human planetary exploration will baseline Ka-Band, but may ultimately require the use of even higher frequencies. Increased commercial demand on low-frequency earth-space bands has also led to increased interest in the use of higher frequencies in regions like K u - and K,- band. Data is taken from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR), which operates at 13.8 GHz, and the true radar reflectivity profile is determined along the PR beam via low-frequency ground based polarimetric observations. The specific differential phase (Kdp) is measured along the beam and a theoretical model is used to determine the expected specific attenuation (k). This technique, called the k-Kdp method, uses a Fuzzy-Logic model to determine the hydrometeor type along the PR beam from which the appropriate k-Kdp relationship is used to determine k and, ultimately, the total path-integrated attenuation (PIA) on PR measurements. Measurements from PR and the NCAR S-POL radar were made during the TEFLUN-B experiment that took place near Melbourne, FL in 1998, and the TRMM-LBA campaign near Ji-Parana, Brazil in 1999.

Bolen, Steve↗

High-Frequency Performance of Submicrometer Transistors That Use Aligned Arrays of Single-Walled Carbon Nanotubes

The unique electronic properties of single-walled carbon nanotubes (SWNTs) make them promising candidates for next generation electronics, particularly in systems that demand high frequency (e.g., radio frequency, RF) operation. Transistors that incorporate perfectly aligned, parallel arrays of SWNTs avoid the practical limitations of devices that use individual tubes, and they also enable comprehensive experimental and theoretical evaluation of the intrinsic properties. Thus, devices consisting of arrays represent a practical route to use of SWNTs for RF devices and circuits. The results presented here reveal many aspects of device operation in such array layouts, including full compatibility with conventional small signal models of RF response. Submicrometer channel length devices show unity current gain (f t ) and unity power gain frequencies (f max ) as high as ~5 and ~9 GHz, respectively, with measured scattering parameters (S-parameters) that agree quantitatively with calculation. The small signal models of the devices provide the essential intrinsic parameters: saturation velocities of 1.2 × 10 7 cm/s and intrinsic values of f t of ~30 GHz for a gate length of 700 nm, increasing with decreasing length. Here, the results provide clear insights into the challenges and opportunities of SWNT arrays for applications in RF electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermophysical Properties of High-Frequency Induction Heat Sintered Graphene Nanoplatelets/Alumina Ceramic Functional Nanocomposites

This paper concerns the thermophysical properties of high-frequency induction heat (HFIH) sintered alumina ceramic nanocomposites containing various graphene nanoplatelets (GNP) concentrations. The GNP/alumina nanocomposites demonstrated high densities, fine-grained microstructures, highest fracture toughness and hardness values of 5.7 MPa m{sup 1/2} and 18.4 GPa, which found 72 and 8%, superior to the benchmarked monolithic alumina, respectively. We determine the role of GNP in tuning the microstructure and inducing toughening mechanisms in the nanocomposites. The sintered monolithic alumina exhibited thermal conductivity value of 24.8 W/mK; however, steady drops of 2, 15 and 19% were recorded after adding respective GNP contents of 0.25, 0.5 and 1.0 wt.% in the nanocomposites. In addition, a dwindling trend in thermal conductions with increasing temperatures was recorded for all sintered samples. Simulation of experimental results with proven theoretical thermal models showed the dominant role of GNP dispersions, microstructural porosity, elastic modulus and grain size in controlling the thermal transport properties of the GNP/alumina nanocomposites. Thermogravimetric analysis showed that the nanocomposite with up to 0.5 mass% of GNP is thermally stable at the temperatures greater than 875 °C. The GNP/alumina nanocomposites owning a distinctive combination of mechanical and thermal properties are promising contenders for the specific components of the aerospace engine and electronic devices having contact with elevated temperatures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

First-principles Prediction of X-Ray Polarization from Magnetic Reconnection in High-frequency BL Lacertae Objects

Relativistic magnetic reconnection is a potential particle acceleration mechanism for high-frequency BL Lac objects (HBLs). The Imaging X-ray Polarimetry Explorer (IXPE) scheduled to launch in 2021 has the capability to probe the evolution of magnetic field in HBLs, examining the magnetic reconnection scenario for the HBL flares. In this paper, we make the first attempt to self-consistently predict HBL X-ray polarization signatures arising from relativistic magnetic reconnection via combined particle-in-cell and polarized radiation transfer simulations. Here, we find that although the intrinsic optical and X-ray polarization degrees are similar on average, the X-ray polarization is much more variable in both the polarization degree and angle (PD and PA). Given the sensitivity of the IXPE, it may obtain one to a few polarization data points for one flaring event of nearby bright HBLs Mrk 421 and 501. However, it may not fully resolve the highly variable X-ray polarization. Due to temporal depolarization, where the integration of photons with variable polarization states over a finite period of time can lower the detected PD, the measured X-ray PD can be considerably lower than the optical counterpart or even undetectable. The lower X-ray PD than the optical thus can be a characteristic signature of relativistic magnetic reconnection. For very bright flares where the X-ray polarization is well resolved, relativistic magnetic reconnection predicts smooth X-ray PA swings, which originate from large plasmoid mergers in the reconnection region.

79 ASTRONOMY AND ASTROPHYSICS↗